Unlocking the Economic Potential of a Mature Field Through Rigless Remediation of Microchannels in a Cement Packer Using Epoxy Resin and Ultrafine Cement Technology to Access New Oil Reserves

2018 ◽  
Author(s):  
Manu Khanna ◽  
Phanijyoti Sarma ◽  
Krishna Chandak ◽  
Apurv Agarwal ◽  
Animesh Kumar ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Economic Potential ◽  
Oil Reserves ◽  
Mature Field ◽  
Ultrafine Cement

Improvement of the efficiency of remaining oil reserves recovery at mature field

2012 ◽  
Author(s):  
Timur Fanuzovich Manapov ◽  
A. A. Ruchkin ◽  
E. V. Ustyugova ◽  
A. N. Levanov
Keyword(s):  
Oil Reserves ◽  
Remaining Oil ◽  
Mature Field

Investigation of novel tri-functional epoxy resin derived from cardanol as partial replacement of BPA based epoxy in zinc rich primer

2014 ◽  
Vol 43 (6) ◽  
pp. 379-388 ◽  
Author(s):  
Mukesh Kathalewar ◽  
Anagha Sabnis ◽  
Gulzar Waghoo
Keyword(s):  
Sustainable Development ◽  
Epoxy Resin ◽  
High Performance ◽  
Partial Replacement ◽  
Successful Implementation ◽  
Content Type ◽  
Coating Application ◽  
Oil Reserves ◽  
Platform Chemicals ◽  
Novel Approach

Purpose The purpose of this paper is to explore the application of triglycidyl resin (TGC) prepared from cardanol as partial replacement of conventional bis-phenol A (BPA) based epoxy resin for zinc rich primers (ZRPs). Design/methodology/approach The synthesis of new platform chemicals that are based on renewable resources has been accepted as a strategy to contribute to sustainable development due to the anticipated depletion of fossil oil reserves and rising oil prices. We prepared a tri-functional epoxy resin from cardanol which can be used as partial replacement of BPA based epoxy. The ZRPs were prepared using 50:50 ratio of TGC:BPA epoxy, and the coatings were evaluated for mechanical, chemical and anticorrosive properties. Findings The 50 per cent replacement of BPA based epoxy by TGC resulted in at par mechanical, chemical and anticorrosive properties as evaluated by various methods. The successful implementation can thus contribute to sustainable development by “green chemistry” route. Research limitations/implications The prepared TGC resin in the current work was studied for application in ZRPs. This can also be explored for high performance coatings, adhesives and other engineering applications. Practical implications The TGC binder was prepared by simple two-step reaction. This can successfully be used as binder for coating application without any modifications. Originality/value A novel approach of using green and ecofriendly TGC resin as replacement of high cost BPA based epoxy was explored and can be implemented for numerous applications.

Improvement of the Efficiency of Remaining Oil Reserves Recovery at Mature Field (Russian)

2012 ◽  
Author(s):  
Timur Fanuzovich Manapov ◽  
A. A. Ruchkin ◽  
E. V. Ustyugova ◽  
A. N. Levanov
Keyword(s):  
Oil Reserves ◽  
Remaining Oil ◽  
Mature Field

scholarly journals A SUCCESS CASE OF WIDURI AREA REJUVENATION, ASRI BASIN, OFFSHORE SE SUMATRA BLOCK, INDONESIA

2021 ◽  
Vol 36 (2) ◽  
Author(s):  
Dwandari Ralanarko ◽  
Ildrem Syafri ◽  
Abdurrokhim Almabrury ◽  
Andi Agus Nur
Keyword(s):  
Normal Fault ◽  
River System ◽  
Water Contact ◽  
Hydrocarbon Production ◽  
Meandering River ◽  
Oil Reserves ◽  
Coarse Grains ◽  
Mature Field ◽  
Structural Configurations ◽  
Integrated Study

INTA/B Field is one of the most producing mature fields in Widuri Area, Asri Basin, Offshore SE Sumatera, Indonesia, therefore it is subjected to rejuvenation to enhance hydrocarbon production. INTA/B Field is distinguished from other fields from its featured anticlinal structures that have the northeast-southwest trending. This structure is heavily faulted mainly in the up-thrown south side of a major normal fault. Two structural configurations with various oil-water contact have successfully been identified within the field. The most of oil reserves are preserved in the western lobe in which Intan-1 sands. One of the most important reservoirs in this field is Talangakar (TAF) sand deposited as a meandering river system that streamed from the northwest to the southeast within the basin. Two main reservoirs, Gita-34A and Gita-34B are correlated throughout the field and interpreted as Miocene fluvio-channel sands. These two channels are thickened moderately from southwest to northeast which has descriptions as follows: fine- to-coarse grains, unconsolidated to friable, and low cementing materials.INTA/B Field has been produced for 25 years and currently undergoing a watered-out phase. Therefore, an integrated study is subjected to overcome this issue for mature field rejuvenation. The integrated study ranged from geology (e.g., depositional environment and facies analysis), geophysics (e.g., revisiting and reprocessing of seismic attributes), petrophysical calculation, and reservoir engineering (e.g., water conformance plot and volumetric calculation).This integrated study has successfully rejuvenated a mature field resulting and added a significant number in oil production with an average of 300 BPOD/well. The extended project is estimated to have a similar result to the forward pilot.

Ultrastructural investigation of spontaneous pituitary gonadotroph cell adenomas in aging Sprague-Dawley rats

1983 ◽  
Vol 41 ◽  
pp. 702-703
Author(s):  
D. J. McComb ◽  
J. Beri ◽  
F. Zak ◽  
K. Kovacs
Keyword(s):  
Electron Microscopy ◽  
Animal Model ◽  
Epoxy Resin ◽  
Immunoelectron Microscopy ◽  
Tumor Type ◽  
Gonadal Function ◽  
Sprague Dawley ◽  
Male And Female ◽  
Reticulin Fibers ◽  
Sprague Dawley Rats

Gonadotroph cell adenomas of the pituitary are infrequent in human patients and are not invariably associated with altered gonadal function. To date, no animal model of this tumor type exists. Herein, we describe spontaneous gonadotroph cell adenomas in old male and female Sprague-Dawley rats by histology, immunocytology and electron microscopy.The material consisted of the pituitaries of 27 male and 38 female Sprague Dawley rats, all 26 months of age or older, removed at routine autopsy. Sections of formal in-fixed, paraffin-embedded tissue were stained with hematoxylin-phloxine-saffron (HPS), the PAS method and the Gordon-Sweet technique for the demonstration of reticulin fibers. For immunostaining, sections were exposed to anti-rat β-LH, anti-ratβ-TSH, anti-rat PRL, anti-rat GH and anti-rat ACTH 1-39. For electron microscopy, tissue was fixed in 2.5% glutaraldehyde, postfixed in 1% OsO4 and embedded in epoxy-resin. Tissue fixed in 10% formalin, embedded in epoxy resin without osmification, was used for immunoelectron microscopy.

Surface Structure in Microtomed Sections Caused by Glass and Diamond Knives

1971 ◽  
Vol 29 ◽  
pp. 456-457
Author(s):  
J. Temple Black ◽  
William G. Boldosser
Keyword(s):  
Plastic Deformation ◽  
Epoxy Resin ◽  
Carbon Coating ◽  
Surface Damage ◽  
Body Angle ◽  
Normal Manner ◽  
Bottom Side ◽  
Cutting Direction ◽  
Made In ◽  
Diamond Knife

Ultramicrotomy produces plastic deformation in the surfaces of microtomed TEM specimens which can not generally be observed unless special preparations are made. In this study, a typical biological composite of tissue (infundibular thoracic attachment) infiltrated in the normal manner with an embedding epoxy resin (Epon 812 in a 60/40 mixture) was microtomed with glass and diamond knives, both with 45 degree body angle. Sectioning was done in Portor Blum Mt-2 and Mt-1 microtomes. Sections were collected on formvar coated grids so that both the top side and the bottom side of the sections could be examined. Sections were then placed in a vacuum evaporator and self-shadowed with carbon. Some were chromium shadowed at a 30 degree angle. The sections were then examined in a Phillips 300 TEM at 60kv.Carbon coating (C) or carbon coating with chrom shadowing (C-Ch) makes in effect, single stage replicas of the surfaces of the sections and thus allows the damage in the surfaces to be observable in the TEM. Figure 1 (see key to figures) shows the bottom side of a diamond knife section, carbon self-shadowed and chrom shadowed perpendicular to the cutting direction. Very fine knife marks and surface damage can be observed.

Epoxy Resin Embedment

1968 ◽  
Vol 26 ◽  
pp. 100-101
Author(s):  
J. G. Adams ◽  
M. M. Campbell ◽  
H. Thomas ◽  
J. J. Ghldonl
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Epoxy Resin ◽  
Light Microscope ◽  
Epoxy Resins ◽  
Image Contrast ◽  
Tissue Preservation ◽  
Resin System ◽  
Excellent Quality

Since the introduction of epoxy resins as embedding material for electron microscopy, the list of new formulations and variations of widely accepted mixtures has grown rapidly. Described here is a resin system utilizing Maraglas 655, Dow D.E.R. 732, DDSA, and BDMA, which is a variation of the mixtures of Lockwood and Erlandson. In the development of the mixture, the Maraglas and the Dow resins were tested in 3 different volumetric proportions, 6:4, 7:3, and 8:2. Cutting qualities and characteristics of stability in the electron beam and image contrast were evaluated for these epoxy mixtures with anhydride (DDSA) to epoxy ratios of 0.4, 0.55, and 0.7. Each mixture was polymerized overnight at 60°C with 2% and 3% BDMA.Although the differences among the test resins were slight in terms of cutting ease, general tissue preservation, and stability in the beam, the 7:3 Maraglas to D.E.R. 732 ratio at an anhydride to epoxy ratio of 0.55 polymerized with 3% BDMA proved to be most consistent. The resulting plastic is relatively hard and somewhat brittle which necessitates trimming and facing the block slowly and cautiously to avoid chipping. Sections up to about 2 microns in thickness can be cut and stained with any of several light microscope stains and excellent quality light photomicrographs can be taken of such sections (Fig. 1).

The Application of Ultra-Thin Sectioning Techniques to Non-Biological Samples

1968 ◽  
Vol 26 ◽  
pp. 332-333
Author(s):  
C. F. Oster
Keyword(s):  
Biological Sciences ◽  
Epoxy Resin ◽  
Cross Sections ◽  
Biological Samples ◽  
Industrial Applications ◽  
Photographic Film ◽  
Silver Particles ◽  
Thin Sectioning ◽  
Embedding Medium

Although ultra-thin sectioning techniques are widely used in the biological sciences, their applications are somewhat less popular but very useful in industrial applications. This presentation will review several specific applications where ultra-thin sectioning techniques have proven invaluable.The preparation of samples for sectioning usually involves embedding in an epoxy resin. Araldite 6005 Resin and Hardener are mixed so that the hardness of the embedding medium matches that of the sample to reduce any distortion of the sample during the sectioning process. No dehydration series are needed to prepare our usual samples for embedding, but some types require hardening and staining steps. The embedded samples are sectioned with either a prototype of a Porter-Blum Microtome or an LKB Ultrotome III. Both instruments are equipped with diamond knives.In the study of photographic film, the distribution of the developed silver particles through the layer is important to the image tone and/or scattering power. Also, the morphology of the developed silver is an important factor, and cross sections will show this structure.

Ultrastructure of the basal body apparatus in epidermal cells of a sponge larva (Aplysilla SP: Demospongiae)

1992 ◽  
Vol 50 (1) ◽  
pp. 928-929
Author(s):  
R.L. Pinto ◽  
R.M. Woollacott
Keyword(s):  
Sodium Bicarbonate ◽  
Epoxy Resin ◽  
Basal Body ◽  
Phosphate Buffer ◽  
Similar Data ◽  
Basal Apparatus ◽  
Striated Rootlet ◽  
The Common ◽  
Basal Foot ◽  
Sexually Mature

The basal body and its associated rootlet are the organelles responsible for anchoring the flagellum or cilium in the cytoplasm. Structurally, the common denominators of the basal apparatus are the basal body, a basal foot from which microtubules or microfilaments emanate, and a striated rootlet. A study of the basal apparatus from cells of the epidermis of a sponge larva was initiated to provide a comparison with similar data on adult sponges.Sexually mature colonies of Aplysillasp were collected from Keehi Lagoon Marina, Honolulu, Hawaii. Larvae were fixed in 2.5% glutaraldehyde and 0.14 M NaCl in 0.2 M Millonig’s phosphate buffer (pH 7.4). Specimens were postfixed in 1% OsO4 in 1.25% sodium bicarbonate (pH 7.2) and embedded in epoxy resin. The larva ofAplysilla sp was previously described (as Dendrilla cactus) based on live observations and SEM by Woollacott and Hadfield.

Sign in / Sign up

Export Citation Format

Share Document