Connecting the Dots: Multistage Fracturing in Horizontal Wells with Multilayered Reservoirs - Lessons Learned

2022 ◽  
Author(s):  
Ahmed Al Shueili ◽  
Musallam Jaboob ◽  
Hussain Al Salmi
Keyword(s):  
Hydraulic Fracturing ◽  
Learning Curve ◽  
Horizontal Well ◽  
Horizontal Wells ◽  
Fracture Initiation ◽  
Lessons Learned ◽  
Production Performance ◽  
Valuable Insight ◽  
Tight Gas ◽  
Fracture Height

Abstract Efficient multistage hydraulic fracturing in horizontal wells in tight-gas formations with multilayered and laminated reservoirs is a very challenging subject matter; due to formation structure, required well trajectory, and the ability to establish a conductive and permanent connection between all the layers. BP Oman had initiated the technical journey to deliver an effective horizontal well multistage frac design through learnings obtained during three key pilot horizontal wells. Since these initial wells, additional candidates have been drilled and stimulated, resulting in further advancement of the learning curve. Many aspects will be covered in this paper, that will describe how to facilitate the most effective hydraulic fracture placement and production performance, under these laminated conditions. These approaches will include the completion and perforation selection, fracture initiation zone selection, fracture height consideration, frac fluid type and design. The paper will go on to describe a range of different surveillance options, including clean-up and performance surveillance as well as number of other factors. The experiences that have been gained provide valuable insight and learning about how to approach a multistage fracturing horizontal well program in this kind of depositional environment. Additionally, how these lessons can potentially be subsequently adapted and applied to access resources in the more challenging and higher risk areas of the field. For example, this paper will present direct comparison of over and under-displaced stages; differences in execution and production for cased hole and open hole completions; and many other variables that always under discussion for hydraulic fracturing in horizontal wells. This paper describes in detail the results of many multistage fracturing trials by BP Oman in horizontal wells drilled in challenging multilayered and laminated tight-gas reservoirs. These findings may help to cut short learning curve in similar reservoirs in the Middle East Region and elsewhere.

scholarly journals Effect of Geological Heterogeneity on the Production Performance of a Multifractured Horizontal Well in Tight Gas Reservoirs

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 1) ◽  
Author(s):  
Yue Peng ◽  
Tao Li ◽  
Yuxue Zhang ◽  
Yongjie Han ◽  
Dan Wu ◽  
...  
Keyword(s):  
Horizontal Well ◽  
Horizontal Wells ◽  
Gas Production ◽  
Production Performance ◽  
Tight Gas ◽  
Gas Reservoirs ◽  
Gas Reservoir ◽  
Tight Gas Reservoirs ◽  
Reservoir Permeability ◽  
Half Length

Abstract Multifractured horizontal wells are widely used in the development of tight gas reservoirs to improve the gas production and the ultimate reservoir recovery. Based on the heterogeneity characteristics of the tight gas reservoir, the homogeneous scheme and four typical heterogeneous schemes were established to simulate the production of a multifractured horizontal well. The seepage characteristics and production performance of different schemes were compared and analyzed in detail by the analysis of streamline distribution, pressure distribution, and production data. In addition, the effects of reservoir permeability level, length of horizontal well, and fracture half-length on the gas reservoir recovery were discussed. Results show that the reservoir permeability of the unfractured areas, which are located at both ends of the multifractured horizontal well, determines the seepage ability of the reservoir matrix, showing a significant impact on the long-term gas production. High reservoir permeability level, long horizontal well length, and long fracture half-length can mitigate the negative influence of heterogeneity on the gas production. Our research can provide some guidance for the layout of multifractured horizontal wells and fracturing design in heterogeneous tight gas reservoirs.

scholarly journals A Modeling Study of the Productivity of Horizontal Wells in Hydrocarbon-Bearing Reservoirs: Effects of Fracturing Interference

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Lei Huang ◽  
Peijia Jiang ◽  
Xuyang Zhao ◽  
Liang Yang ◽  
Jiaying Lin ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Well ◽  
Finite Difference Methods ◽  
Horizontal Wells ◽  
Fracture Initiation ◽  
Design Parameters ◽  
Porous Media Flow ◽  
Propagation Mechanism ◽  
Well Productivity ◽  
Fracturing Process

Commercial production from hydrocarbon-bearing reservoirs with low permeability usually requires the use of horizontal well and hydraulic fracturing for the improvement of the fluid diffusivity in the matrix. The hydraulic fracturing process involves the injection of viscous fluid for fracture initiation and propagation, which alters the poroelastic behaviors in the formation and causes fracturing interference. Previous modeling studies usually focused on the effect of fracturing interference on the multicluster fracture geometry, while the related productivity of horizontal wells is not well studied. This study presents a modeling workflow that utilizes abundant field data including petrophysical, geomechanical, and hydraulic fracturing data. It is used for the quantification of fracturing interference and its correlation with horizontal well productivity. It involves finite element and finite difference methods in the numeralization of the fracture propagation mechanism and porous media flow problems. Planar multistage fractures and their resultant horizontal productivity are quantified through the modeling workflow. Results show that the smaller numbers of clusters per stage, closer stage spacings, and lower fracturing fluid injection rates facilitate even growth of fractures in clusters and stages and reduce fracturing interference. Fracturing modeling results are generally correlated with productivity modeling results, while scenarios with stronger fracturing interference and greater stimulation volume/area can still yield better productivity. This study establishes the quantitative correlation between fracturing interference and horizontal well productivity. It provides insights into the prediction of horizontal well productivity based on fracturing design parameters.

The Interpretation Technique of Rate Transient Analysis Data in Fractured Horizontal Wells

2021 ◽  
Author(s):  
Ruslan Rubikovich Urazov ◽  
Alfred Yadgarovich Davletbaev ◽  
Alexey Igorevich Sinitskiy ◽  
Ilnur Anifovich Zarafutdinov ◽  
Artur Khamitovich Nuriev ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Transient Analysis ◽  
Horizontal Well ◽  
Horizontal Wells ◽  
Data Interpretation ◽  
Analysis Data ◽  
Well Logging ◽  
Rate Transient Analysis ◽  
Fractured Horizontal Well ◽  
Fractured Horizontal Wells

Abstract This research presents a modified approach to the data interpretation of Rate Transient Analysis (RTA) in hydraulically fractured horizontal well. The results of testing of data interpretation technique taking account of the flow allocation in the borehole according to the well logging and to the injection tests outcomes while carrying out hydraulic fracturing are given. In the course of the interpretation of the field data the parameters of each fracture of hydraulic fracturing were selected with control for results of well logging (WL) by defining the fluid influx in the borehole.

Advanced Multi-Disciplinary Simulation Workflow for Well Placement, Hydraulic Fracturing and Production Optimization Applied to the Diyab Unconventional Play in Onshore UAE

2021 ◽  
Author(s):  
Hamid Pourpak ◽  
Samuel Taubert ◽  
Marios Theodorakopoulos ◽  
Arnaud Lefebvre-Prudencio ◽  
Chay Pointer ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
United Arab Emirates ◽  
Reservoir Characterization ◽  
Horizontal Wells ◽  
Production Optimization ◽  
Production Performance ◽  
Well Placement ◽  
Fully Integrated ◽  
Sector Model ◽  
The Impact

Abstract The Diyab play is an emerging unconventional play in the Middle East. Up to date, reservoir characterization assessments have proved adequate productivity of the play in the United Arab Emirates (UAE). In this paper, an advanced simulation and modeling workflow is presented, which was applied on selected wells located on an appraisal area, by integrating geological, geomechanical, and hydraulic fracturing data. Results will be used to optimize future well landing points, well spacing and completion designs, allowing to enhance the Stimulated Rock Volume (SRV) and its consequent production. A 3D static model was built, by propagating across the appraisal area, all subsurface static properties from core-calibrated petrophysical and geomechanical logs which originate from vertical pilot wells. In addition, a Discrete Fracture Network (DFN) derived from numerous image logs was imported in the model. Afterwards, completion data from one multi-stage hydraulically fracked horizontal well was integrated into the sector model. Simulations of hydraulic fracturing were performed and the sector model was calibrated to the real hydraulic fracturing data. Different scenarios for the fracture height were tested considering uncertainties related to the fracture barriers. This has allowed for a better understanding of the fracture propagation and SRV creation in the reservoir at the main target. In the last step, production resulting from the SRV was simulated and calibrated to the field data. In the end, the calibrated parameters were applied to the newly drilled nearby horizontal wells in the same area, while they were hydraulically fractured with different completion designs and the simulated SRVs of the new wells were then compared with the one calculated on the previous well. Applying a fully-integrated geology, geomechanics, completion and production workflow has helped us to understand the impact of geology, natural fractures, rock mechanical properties and stress regimes in the SRV geometry for the unconventional Diyab play. This work also highlights the importance of data acquisition, reservoir characterization and of SRV simulation calibration processes. This fully integrated workflow will allow for an optimized completion strategy, well landing and spacing for the future horizontal wells. A fully multi-disciplinary simulation workflow was applied to the Diyab unconventional play in onshore UAE. This workflow illustrated the most important parameters impacting the SRV creation and production in the Diyab formation for he studied area. Multiple simulation scenarios and calibration runs showed how sensitive the SRV can be to different parameters and how well placement and fracture jobs can be possibly improved to enhance the SRV creation and ultimately the production performance.

scholarly journals A practical method for planning large number of horizontal wells with a reservoir model for a field development plan

2021 ◽  
Vol 10 ◽  
pp. 17-32
Author(s):  
Guido Fava ◽  
Việt Anh Đinh
Keyword(s):  
Horizontal Well ◽  
Horizontal Wells ◽  
Simulation Software ◽  
Production Performance ◽  
Development Plan ◽  
Regular Pattern ◽  
Production Forecast ◽  
Advanced Technique ◽  
Large Reservoir ◽  
Field Development

The most advanced technique to evaluate different solutions proposed for a field development plan consists of building a numerical model to simulate the production performance of each alternative. Fields covering hundreds of square kilometres frequently require a large number of wells. There are studies and software concerning optimal planning of vertical wells for the development of a field. However, only few studies cover planning of a large number of horizontal wells seeking full population on a regular pattern. One of the criteria for horizontal well planning is selecting the well positions that have the best reservoir properties and certain standoffs from oil/water contact. The wells are then ranked according to their performances. Other criteria include the geometry and spacing of the wells. Placing hundreds of well individually according to these criteria is highly time consuming and can become impossible under time restraints. A method for planning a large number of horizontal wells in a regular pattern in a simulation model significantly reduces the time required for a reservoir production forecast using simulation software. The proposed method is implemented by a computer script and takes into account not only the aforementioned criteria, but also new well requirements concerning existing wells, development area boundaries, and reservoir geological structure features. Some of the conclusions drawn from a study on this method are (1) the new method saves a significant amount of working hours and avoids human errors, especially when many development scenarios need to be considered; (2) a large reservoir with hundreds of wells may have infinite possible solutions, and this approach has the aim of giving the most significant one; and (3) a horizontal well planning module would be a useful tool for commercial simulation software to ease engineers' tasks.

Advanced Well Completion Strategies to Improve Gas Production Deliverability in Marginal Tight Gas Reservoirs from an Onshore Abu Dhabi Gas Field

2021 ◽  
Author(s):  
Hajar Ali Abdulla Al Shehhi ◽  
Bondan Bernadi ◽  
Alia Belal Zuwaid Belal Al Shamsi ◽  
Shamma Jasem Al Hammadi ◽  
Fatima Omar Alawadhi ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Wells ◽  
Gas Production ◽  
Abu Dhabi ◽  
Tight Gas ◽  
Production Rates ◽  
Well Productivity ◽  
Gas Saturation ◽  
Well Design ◽  
The Impact

Abstract Reservoir X is a marginal tight gas condensate reservoir located in Abu Dhabi with permeability of less than 0.05 mD. The field was conventionally developed with a few single horizontal wells, though sharp production decline was observed due to rapid pressure depletion. This study investigates the impact of converting the existing single horizontal wells into single long horizontal, dual laterals, triple laterals, fishbone design and hydraulic fracturing in improving well productivity. The existing wells design modifications were planned using a near reservoir simulator. The study evaluated the impact of length, trajectory, number of laterals and perforation intervals. For Single, dual, and triple lateral wells, additional simulation study with hydraulic fracturing was carried out. To evaluate and obtain effective comparisons, sector models with LGR was built to improve the simulation accuracy in areas near the wellbore. The study conducted a detailed investigation into the impact of various well designs on the well productivity. It was observed that maximizing the reservoir contact and targeting areas with high gas saturation led to significant increase in the well productivity. The simulation results revealed that longer laterals led to higher gas production rates. Dual lateral wells showed improved productivity when compared to single lateral wells. This incremental gain in the production was attributed to increased contact with the reservoir. The triple lateral well design yielded higher productivity compared to single and dual lateral wells. Hydraulic fracturing for single, dual, and triple lateral wells showed significant improvement in the gas production rates and reduced condensate banking near the wellbore. A detailed investigation into the fishbone design was carried out, this involved running sensitivity runs by varying the number of branches. Fishbone design showed considerable increment in production when compared to other well designs This paper demonstrates that increasing the reservoir contact and targeting specific areas of the reservoir with high gas saturation can lead to significant increase in the well productivity. The study also reveals that having longer and multiple laterals in the well leads to higher production rates. Hydraulic fracturing led to higher production gains. Fishbone well design with its multiple branches showed the most production again when compared to other well designs.

Understanding Unusual Diagnostic Fracture Injection Test Results in Tight Gas Fields - A Holistic Approach to Resolving the Data

2015 ◽  
Author(s):  
R.N.. N. Naidu ◽  
E.A.. A. Guevara ◽  
A.J.. J. Twynam ◽  
J.. Rueda ◽  
W.. Dawson ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Test Procedure ◽  
Holistic Approach ◽  
In Situ Stress ◽  
Lessons Learned ◽  
Petroleum Engineering ◽  
Tight Gas ◽  
Review Team ◽  
Gas Fields ◽  
The Impact

Abstract Hydraulic fracturing is a commonly used completion approach for extracting hydrocarbon resources from formations, particularly in those formations of very low permeability. As part of this process the use of Diagnostic Fracture Injection Tests (DFIT) can provide valuable information. When the measured pressures in such tests are outside the expected range for a given formation, a number of possibilities and questions will arise. Such considerations may include: What caused such inflated pressures? What is the in-situ stress state? Was there a mechanical or operational problem? Was the test procedure or the test equipment at fault? What else can explain the abnormal behaviour? While there may not be simple answers to all of these questions, such an experience can lead to a technically inaccurate conclusion based on inadequate analysis. A recently completed project faced just such a challenge, initially resulting in poor hydraulic fracturing efficiency and a requirement to understand the root causes. In support of this, a thorough analysis involving a multi-disciplinary review team from several technical areas, including petrophysics, rock/geo-mechanics, fluids testing/engineering, completions engineering, hydraulic fracture design and petroleum engineering, was undertaken. This paper describes the evolution of this study, the work performed, the results and conclusions from the analysis. The key factors involved in planning a successful DFIT are highlighted with a general template and a work process for future testing provided. The importance of appreciating the impact of the drilling and completion fluids composition, their properties and their compatibility with the formation fluids are addressed. The overall process and technical approach from this case study in tight gas fields, will have applicability across similar fields and the lessons learned could help unlock those reserves that are initially deemed technically or even commercially unattractive due to abnormal or unexpected behaviour measured during a DFIT operation.

Geologic Controls on Gas Production and Hydraulic-Fracturing Flowback in Tight Gas Sandstones of the Late Jurassic Monteith Formation, Deep Basin, Alberta, Canada

2016 ◽  
Vol 19 (01) ◽  
pp. 024-040 ◽  
Author(s):  
Liliana Zambrano ◽  
Per K. Pedersen ◽  
Roberto Aguilera
Keyword(s):  
Hydraulic Fracturing ◽  
Gas Production ◽  
Production Performance ◽  
Rock Properties ◽  
Hydraulic Fractures ◽  
Tight Gas ◽  
Deep Basin ◽  
Rock Types ◽  
Sandstone Reservoirs ◽  
Geologic Controls

Summary A comparison of rock properties integrated with production performance and hydraulic-fracturing flowback (FB) of the uppermost lithostratigraphic “Monteith A” and the lowermost portion “Monteith C” of the Monteith Formation in the Western Canada Sedimentary Basin (WCSB) in Alberta is carried out with the use of existing producing gas wells. The analyses are targeted to understand the major geologic controls that differentiate the two tight gas sandstone reservoirs. This study consists of basic analytical tools available for geological characterization of tight gas reservoirs that is based on the identification and comparison of different rock types such as depositional, petrographic, and hydraulic for each lithostratigraphic unit of the Monteith Formation. As these low-matrix-permeability sandstone reservoirs were subjected to intense post-depositional diagenesis, a comparison of the various rock types allows the generation of more-accurate reservoir description, and a better understanding of the key geologic characteristics that control gas-production potential and possible impact on hydraulic-fracturing FB. Well performance and FB were the focus of many previous simulation and geochemical studies. In contrast, we find that an adequate understanding of the rocks hosting hydraulic fractures is a necessary complement to those studies for estimating FB times. This understanding was lacking in some previous studies. As a result, a new method is proposed on the basis of a crossplot of cumulative gas production vs. square root of time for estimating FB time. It is concluded that the “Monteith A” unit has better rock quality than the “Monteith C” unit because of less-heterogeneous reservoir geometry, less-complex mineralogical composition, and larger pore-throat apertures.

Successful Unlock for Non-Continuous Sand of Tight Gas Reservoir using Horizontal Wells

2021 ◽  
Author(s):  
Raed Mohamed Elmohammady ◽  
Mostafa Mahrous Ali ◽  
Hassan Elsayed Salem
Keyword(s):  
Horizontal Well ◽  
Horizontal Wells ◽  
Western Desert ◽  
Tight Gas ◽  
Vertical Wells ◽  
Gas Reservoir ◽  
Horizontal Section ◽  
Reservoir Permeability ◽  
Wide Range ◽  
Tight Gas Reservoir

Abstract Reservoir development in Safa Formation requires a lot of vertical wells in order to exploit the gas reserve in the formation which means high cost is needed because the heterogeneity in the formation is noticed due to sandstone is pinched out in different locations of the reservoir. So, vertical well may be sweep from limited area of the reservoir that make safa formation has less priority for new activities. Form all of that the plan was drilling horizontal wells with long horizontal section to recover great volume of gas from reservoir. In addition to reduction in number of drilling vertical wells in the reservoir. In contrast, the major constrains is the small thickness of reservoir that make drilling horizontal section is very difficult. The main characteristics of safa formation is non continuous sandstone in the whole reservoir with great heterogeneity that not controlled by any points in the reservoir for the distribution of sandstone. In addition, there are a lot of locations in safa formation that include lean intervals which have kaolinite, elite that are not capable for produce from sand. In other hand, there is another constrains beside the discontinuity of sand production is the heterogeneity of permeability properties of reservoir that change in wide range across the reservoir with minimum range of 0.01 md and increase in some locations to reach 100 md. From all of the previous, it is a big challenge in drilling horizontal wells with long horizontal section in thin reservoir thickness in order to access the best reservoir permeability and optimize the number of drilling wells based on this concept. This paper will discuss case study of unlock and development long horizontal section in gas reservoir characterized by its tightness. The main goal of this horizontal well to recover ultimate gas reserve from safa formation by horizontal section reached to 2000 meter with a challenge because it is abnormal to drill this large horizontal section in western desert of Egypt in reservoir thickness range from 5 meter to 30 meter as prognosis from other offset wells in case of there is no pitchout of the sandstone. After Drilling of first horizontal well, the results were unexpected because the well penetrates a large horizontal section of sandstone in safa formation. This section reached to around 1750 meter with average reservoir permeability between 10 – 20 md and the reservoir porosity about 13% with good hydrocarbon saturation that changes along this section from 75% to 80%. So, this well put on production with very stable gas production rate 20 MMSCFD. In this paper will discuss in details the different challenge that faced to unlock this tight gas reservoir and will discuss the performance of horizontal well production. In this paper will discuss the first horizontal well in safa formation and the longest horizontal section in western desert of Egypt in tight gas formation that has a lot of challenges and risks are faced. After success the concept of horizontal well in heterogeneous reservoir, the next plan is the development of this reservoir using several horizontal wells to recover the ultimate recovery of gas from safa formation.

Sign in / Sign up

Export Citation Format

Share Document