scholarly journals A Modeling Study of the Productivity of Horizontal Wells in Hydrocarbon-Bearing Reservoirs: Effects of Fracturing Interference

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Lei Huang ◽  
Peijia Jiang ◽  
Xuyang Zhao ◽  
Liang Yang ◽  
Jiaying Lin ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Well ◽  
Finite Difference Methods ◽  
Horizontal Wells ◽  
Fracture Initiation ◽  
Design Parameters ◽  
Porous Media Flow ◽  
Propagation Mechanism ◽  
Well Productivity ◽  
Fracturing Process

Commercial production from hydrocarbon-bearing reservoirs with low permeability usually requires the use of horizontal well and hydraulic fracturing for the improvement of the fluid diffusivity in the matrix. The hydraulic fracturing process involves the injection of viscous fluid for fracture initiation and propagation, which alters the poroelastic behaviors in the formation and causes fracturing interference. Previous modeling studies usually focused on the effect of fracturing interference on the multicluster fracture geometry, while the related productivity of horizontal wells is not well studied. This study presents a modeling workflow that utilizes abundant field data including petrophysical, geomechanical, and hydraulic fracturing data. It is used for the quantification of fracturing interference and its correlation with horizontal well productivity. It involves finite element and finite difference methods in the numeralization of the fracture propagation mechanism and porous media flow problems. Planar multistage fractures and their resultant horizontal productivity are quantified through the modeling workflow. Results show that the smaller numbers of clusters per stage, closer stage spacings, and lower fracturing fluid injection rates facilitate even growth of fractures in clusters and stages and reduce fracturing interference. Fracturing modeling results are generally correlated with productivity modeling results, while scenarios with stronger fracturing interference and greater stimulation volume/area can still yield better productivity. This study establishes the quantitative correlation between fracturing interference and horizontal well productivity. It provides insights into the prediction of horizontal well productivity based on fracturing design parameters.

Numerical Simulation on Propagation Mechanism of Hydraulic Fracture in Fractured Rockmass

2014 ◽  
Vol 488-489 ◽  
pp. 417-420 ◽  
Author(s):  
Xiao Xi Men ◽  
C.A. Tang ◽  
Zhi Hui Han
Keyword(s):  
Hydraulic Fracturing ◽  
Fracture Initiation ◽  
Coupling Model ◽  
Natural Fracture ◽  
Tensile Fracture ◽  
Propagation Mechanism ◽  
Initiation And Propagation ◽  
Fracturing Process ◽  
Two Factors ◽  
Seepage Characteristics

Hydraulic fracturing process in fractured rockmass which with an existing single natural fracture at its various conditions: its different angles and different lengths was simulated by using RFPA2D(2.0)-Flow version which adopts the finite element method and considers the heterogeneous characteristics of rock in meso-scale, creates seepage-stress-failure coupling model. The effect tendency of natural fractures angle and length on the seepage characteristics of fractured rockmass was given through the description of tensile fracture initiation and propagation in the rock specimens. The simulation results show that the effect of these two factors on fractures initiation, propagation and rockmass stability under the hydraulic fracturing could be remarkable.

Connecting the Dots: Multistage Fracturing in Horizontal Wells with Multilayered Reservoirs - Lessons Learned

2022 ◽  
Author(s):  
Ahmed Al Shueili ◽  
Musallam Jaboob ◽  
Hussain Al Salmi
Keyword(s):  
Hydraulic Fracturing ◽  
Learning Curve ◽  
Horizontal Well ◽  
Horizontal Wells ◽  
Fracture Initiation ◽  
Lessons Learned ◽  
Production Performance ◽  
Valuable Insight ◽  
Tight Gas ◽  
Fracture Height

Abstract Efficient multistage hydraulic fracturing in horizontal wells in tight-gas formations with multilayered and laminated reservoirs is a very challenging subject matter; due to formation structure, required well trajectory, and the ability to establish a conductive and permanent connection between all the layers. BP Oman had initiated the technical journey to deliver an effective horizontal well multistage frac design through learnings obtained during three key pilot horizontal wells. Since these initial wells, additional candidates have been drilled and stimulated, resulting in further advancement of the learning curve. Many aspects will be covered in this paper, that will describe how to facilitate the most effective hydraulic fracture placement and production performance, under these laminated conditions. These approaches will include the completion and perforation selection, fracture initiation zone selection, fracture height consideration, frac fluid type and design. The paper will go on to describe a range of different surveillance options, including clean-up and performance surveillance as well as number of other factors. The experiences that have been gained provide valuable insight and learning about how to approach a multistage fracturing horizontal well program in this kind of depositional environment. Additionally, how these lessons can potentially be subsequently adapted and applied to access resources in the more challenging and higher risk areas of the field. For example, this paper will present direct comparison of over and under-displaced stages; differences in execution and production for cased hole and open hole completions; and many other variables that always under discussion for hydraulic fracturing in horizontal wells. This paper describes in detail the results of many multistage fracturing trials by BP Oman in horizontal wells drilled in challenging multilayered and laminated tight-gas reservoirs. These findings may help to cut short learning curve in similar reservoirs in the Middle East Region and elsewhere.

The Interpretation Technique of Rate Transient Analysis Data in Fractured Horizontal Wells

2021 ◽  
Author(s):  
Ruslan Rubikovich Urazov ◽  
Alfred Yadgarovich Davletbaev ◽  
Alexey Igorevich Sinitskiy ◽  
Ilnur Anifovich Zarafutdinov ◽  
Artur Khamitovich Nuriev ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Transient Analysis ◽  
Horizontal Well ◽  
Horizontal Wells ◽  
Data Interpretation ◽  
Analysis Data ◽  
Well Logging ◽  
Rate Transient Analysis ◽  
Fractured Horizontal Well ◽  
Fractured Horizontal Wells

Abstract This research presents a modified approach to the data interpretation of Rate Transient Analysis (RTA) in hydraulically fractured horizontal well. The results of testing of data interpretation technique taking account of the flow allocation in the borehole according to the well logging and to the injection tests outcomes while carrying out hydraulic fracturing are given. In the course of the interpretation of the field data the parameters of each fracture of hydraulic fracturing were selected with control for results of well logging (WL) by defining the fluid influx in the borehole.

Advanced Well Completion Strategies to Improve Gas Production Deliverability in Marginal Tight Gas Reservoirs from an Onshore Abu Dhabi Gas Field

2021 ◽  
Author(s):  
Hajar Ali Abdulla Al Shehhi ◽  
Bondan Bernadi ◽  
Alia Belal Zuwaid Belal Al Shamsi ◽  
Shamma Jasem Al Hammadi ◽  
Fatima Omar Alawadhi ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Wells ◽  
Gas Production ◽  
Abu Dhabi ◽  
Tight Gas ◽  
Production Rates ◽  
Well Productivity ◽  
Gas Saturation ◽  
Well Design ◽  
The Impact

Abstract Reservoir X is a marginal tight gas condensate reservoir located in Abu Dhabi with permeability of less than 0.05 mD. The field was conventionally developed with a few single horizontal wells, though sharp production decline was observed due to rapid pressure depletion. This study investigates the impact of converting the existing single horizontal wells into single long horizontal, dual laterals, triple laterals, fishbone design and hydraulic fracturing in improving well productivity. The existing wells design modifications were planned using a near reservoir simulator. The study evaluated the impact of length, trajectory, number of laterals and perforation intervals. For Single, dual, and triple lateral wells, additional simulation study with hydraulic fracturing was carried out. To evaluate and obtain effective comparisons, sector models with LGR was built to improve the simulation accuracy in areas near the wellbore. The study conducted a detailed investigation into the impact of various well designs on the well productivity. It was observed that maximizing the reservoir contact and targeting areas with high gas saturation led to significant increase in the well productivity. The simulation results revealed that longer laterals led to higher gas production rates. Dual lateral wells showed improved productivity when compared to single lateral wells. This incremental gain in the production was attributed to increased contact with the reservoir. The triple lateral well design yielded higher productivity compared to single and dual lateral wells. Hydraulic fracturing for single, dual, and triple lateral wells showed significant improvement in the gas production rates and reduced condensate banking near the wellbore. A detailed investigation into the fishbone design was carried out, this involved running sensitivity runs by varying the number of branches. Fishbone design showed considerable increment in production when compared to other well designs This paper demonstrates that increasing the reservoir contact and targeting specific areas of the reservoir with high gas saturation can lead to significant increase in the well productivity. The study also reveals that having longer and multiple laterals in the well leads to higher production rates. Hydraulic fracturing led to higher production gains. Fishbone well design with its multiple branches showed the most production again when compared to other well designs.

scholarly journals Numerical Modeling on Hydraulic Fracturing in Coal-Rock Mass for Enhancing Gas Drainage

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Zhigang Yuan ◽  
Yaohua Shao
Keyword(s):  
Mathematical Model ◽  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Gas Flow ◽  
Numerical Solutions ◽  
Fracture Initiation ◽  
Engineering Practice ◽  
Gas Drainage ◽  
Fracturing Process ◽  
Coal Rock

The mechanism of how hydraulic fracturing influences gas drainage in coal-rock mass is still not clear due to its complex mechanism. In this work, statistical distributions are firstly introduced to describe heterogeneity of coal-rock mass; a novel simultaneously coupled mathematical model, which can describe the fully coupled process including seepage-damage coupling during hydraulic fracturing process and subsequent gas flow during gas drainage process, is established; its numerical implementation procedure is coded into a Matlab program to calculate the damage variables, and it partly uses COMSOL solver to obtain numerical solutions of governing equations with damage-flow coupling; the mathematical model and its implementation are validated for initial damage pressure and mode of a single solid model without considering flow-damage coupling, as well as fracture initiation pressure and influence of heterogeneity on damage evolution of hydraulic fracturing considering flow-damage coupling; and finally, based on an engineering practice of hydraulic fracturing with two boreholes, the mechanism of how hydraulic fracturing influences gas drainage is investigated, numerical simulation results indicate that coal-rock mass pore-fissure structure has been improved, and there would exist a gas migration channel with characteristics of higher porosity and lower stresses, which demonstrates significant effects and mechanism of hydraulic fracturing on improving coal-rock permeability and enhancing gas drainage. The research results provide a guide for operation of hydraulic fracturing and optimal layout of gas drainage boreholes.

Unconventional Technology: The Difference Between Successful Application and Unsuccessful Application (North America and Overseas)

2015 ◽  
Author(s):  
A.. Casero ◽  
M.. Rylance
Keyword(s):  
North America ◽  
Hydraulic Fracturing ◽  
North American ◽  
Horizontal Well ◽  
Global Market ◽  
Direct Result ◽  
The North ◽  
Multi Stage ◽  
Fracturing Process ◽  
Open Hole

AbstractThe past two decades have seen the development and expansion of an approach to wellbore completions that has resulted in unlocking significant reserves from previously disregarded resource, and has been responsible for the North American shale gas ‘revolution’ or ‘evolution’ (depending upon how you see it). However, this approach has faced significant complications to appropriate, successful and economic deployment, when attempts have been made to export this process overseas.This ground-breaking completion approach was achieved as a direct result of the combination of two well-known and widely applied industry technologies, from distinct disciplines: namely horizontal lateral drilling and propped hydraulic fracture stimulation. This simple combination is referred to by a number of different designations which are used to describe the process, but it is most commonly referred to simply as multi-stage horizontal well hydraulic fracturing.The North American success story has been primarily accomplished through the application of two distinct variants of this technique, split by fundamental approach to the stage sequencing: namely the Plug & Perf approach and the Open Hole Multi-Stage completion system (typically ball-activated fracture ports). The Open Hole Multi-Stage completion system has typically been applied selectively, with a bias towards clastic formations, whereas Plug & Perf has been more widely applied and almost exclusively dominates the shale completion environment.This paper will describe the engineering aspects of the multi-stage horizontal well hydraulic fracturing process, as well as those particular North America conditions and deliberate compromises that have been made, in order to encourage this approach to become established and develop further. Such analysis will include a holistic approach to the global market conditions, in order to better understand the local and regional factors that have played such a fundamental role in North American success, many of which have been erroneously overlooked elsewhere. This paper will investigate a number of these key issues and factors, particularly related to completion and reservoir interaction that should be considered carefully when choosing to export such techniques to new areas of application outside of North America. This will include an understanding of the key data that should be acquired, from the early exploration and subsequent appraisal wells, so that appropriate decisions can be made efficiently.

Hydraulic Fracturing Process: Roles of In Situ Stress and Rock Strength

2012 ◽  
Vol 616-618 ◽  
pp. 435-440
Author(s):  
Yan Jun Feng ◽  
Xiu Wei Shi
Keyword(s):  
Hydraulic Fracturing ◽  
Analytical Model ◽  
Field Experiments ◽  
Rock Strength ◽  
Fracture Initiation ◽  
In Situ Stress ◽  
Experimental Investigations ◽  
Propagation Process ◽  
Fracturing Process

This paper presents results of a comprehensive study involving analytical and field experimental investigations into the factors controlling the hydraulic fracturing process. Analytical theories for fracture initiation of vertical and horizontal borehole are reviewed. The initiation and propagation process of hydraulic fracturing is performed in the field by means of hydraulic fracturing and stepwise hydraulic fracturing, the effect of factors such as in-situ stress and rock strength on fracture propagation process is studied and discussed. The fracture initiation pressures estimated from the analytical model and field experiments are compared as well as the fracturing process during case 1and case 2. Results from the analytical model and field experiments conducted in this study are interpreted with a particular effort to enlighten the factors controlling the hydraulic fracturing process.

scholarly journals Productivity Evaluation for Long Horizontal Well Test in Deep-Water Faulted Sandstone Reservoir

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Zhiwang Yuan ◽  
Li Yang ◽  
Yingchun Zhang ◽  
Rui Duan ◽  
Xu Zhang ◽  
...  
Keyword(s):  
Steady State ◽  
Deep Water ◽  
Horizontal Well ◽  
Evaluation Method ◽  
Horizontal Wells ◽  
Productivity Index ◽  
Test Time ◽  
Well Test ◽  
Well Productivity ◽  
Sandstone Reservoir

For deep-water faulted sandstone reservoirs, the general practice is to design long horizontal wells improving well productivity. During the project implementation stage, well tests are performed on all drilled wells to evaluate well productivity accurately. Furthermore, multisize chokes are often utilized in a shorten test time for loosen formation, high test cost, and high well productivity. Nevertheless, the conventional productivity evaluation approach cannot accurately evaluate the well test productivity and has difficulty in determining the underneath pattern. As a result, the objective of this paper is to determine a productivity evaluation method for multisize chokes long horizontal well test in deep-water faulted sandstone reservoir. This approach introduces a productivity model for long horizontal wells in faulted sandstone reservoir. It also includes the determination of steady-state test time and the productivity evaluation method for multisize chokes. In this paper, the EGINA Oilfield, a deep-water faulted sandstone reservoir, located in West Africa was chosen as the research target. Based on Renard and Dupuy’s steady-state equation, the relationship between the productivity index per meter and the length of horizontal section was derived. Consequently, this relationship is used to determine the productivity pattern for long horizontal wells with the same geological features, which can provide more accurate productivity evaluations for tested wells and forecast the well productivity for untested wells. After implementing this approach on the EGINA Oilfield, the determined relationship is capable to accurately evaluate the test productivity for long horizontal wells in reservoirs with similar characteristics and assist in examination and treatment for horizontal wells with abnormal productivity.

Design of Horizontal Wellbore in Dadas Shales of Turkey by Considering Wellbore Stability and Reservoir Geomechanics

2021 ◽  
Author(s):  
Sukru Merey ◽  
Can Polat ◽  
Tuna Eren
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Well ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Horizontal Stress ◽  
Wellbore Stability ◽  
Horizontal Drilling ◽  
Horizontal Wellbore ◽  
Reservoir Geomechanics ◽  
Maximum Horizontal Stress

Abstract Currently, many horizontal wells are being drilled in Dadas shales of Turkey. Dadas shales have both oil (mostly) and gas potentials. Thus, hydraulic fracturing operations are being held to mobilize hydrocarbons. Up to 1000 m length horizontal wells are drilled for this purpose. However, there is not any study analyzing wellbore stability and reservoir geomechanics in the conditions of Dadas shales. In this study, the directions of horizontal wells, wellbore stability and reservoir geomechanics of Dadas shales were designed by using well log data. In this study, the python code developed by using Kirsch equations was developed. With this python code, it is possible to estimate unconfined compressive strength in along wellbore at different deviations. By analyzing caliper log, density and porosity logs of Dadas shales, vertical stress of Dadas shales was estimated and stress polygon for these shale was prepared in this study. Then, optimum direction of horizontal well was suggested to avoid any wellbore stability problems. According to the results of this study, high stresses are seen in horizontal directions. In this study, it was found that the maximum horizontal stress in almost the direction of North-South. The results of this study revealed that direction of maximum horizontal stress and horizontal well direction fluid affect the wellbore stability significantly. Thus, in this study, better horizontal well design was made for Dadas shales. Currently, Dadas shales are popular in Turkey because of its oil and gas potential so horizontal drilling and hydraulic fracturing operations are being held. However, in literature, there is no study about horizontal wellbore designs for Dadas shales. This study will be novel and provide information about the horizontal drilling design of Dadas shales.

Sign in / Sign up

Export Citation Format

Share Document