Pitching Early for CCUS Research and Development in Oil & Gas Industry: A Well Thought Endeavor

2021 ◽  
Author(s):  
Raj Deo Tewari ◽  
Mohd Faizal Sedaralit ◽  
Bhajan Lal
Keyword(s):  
Natural Gas ◽  
Research And Development ◽  
Greenhouse Gas ◽  
Carbon Capture ◽  
Oil And Gas ◽  
Renewable Energy Sources ◽  
Co2 Storage ◽  
Small Scale ◽  
Gas Industry ◽  
And Storage

Abstract The oil and gas industry, a highly technical industry, involves a collaboration of various disciplines of science and technology from exploration to production and utilization of the products. Continuous research and technology developments have improved the success of the industry. Oil and Gas will continue to play important role in the total energy mix due to their affordability and easiness of use. The infrastructure and facilities viz, drilling rigs, pipeline, casing and tubular, platforms and chemical produced from other industries also contribute significant greenhouse gas (GHG) emission. Increased use of oil & gas is causing the emission of GHG in the atmosphere causing temperature rise of the earth which is a major cause for climate change. The increasing demand for natural gas is necessitating the development of giant contaminated gas fields which will further increase GHG production significantly. Natural gas would be the transition fuel from conventional to renewable energy sources. Climate science is understood, and experts are of the view that current and enhanced future emissions of GHG will have a catastrophic effect on the environment. It has to be controlled and produced contaminated gases need to be stored safely and utilized for humanity. Improvement in energy efficiency and environmental sustainability by reduction of greenhouse gas emissions from the industrial operations as well as from energy use by consumers is picking up. Carbon capture, separation, transportation, storage, and utilization has started at a small scale. There is an urgent need to improve yesterday’s performance and meet tomorrow’s challenge in CCUS in the petroleum industry. Fundamental research for capturing, utilization and storage of GHG has to be enhanced for improvising the processes. It is a fact that technology stimulates science, science stimulates technology, and both stimulate the efficiency of the process. Because of this, success mantra and objective for better performance, oil and gas companies are investing and pursuing research and development for controlling and managing the carbon capture utilization and storage (CCUS). This paper discusses the result of active Research and Development of CCUS which is being pursued for the last decades for fundamental issues of separation of carbon dioxide, transportation, subsurface storage physics & chemistry and utilization of the CO2 into usable products. Scientific results and findings of basic and applied research for better efficiency and cost-effectiveness of the products like precipitated calcium carbonate (PCC), alcohols and methane generation by Methanogenesis. Supercritical behavior of CO2 in subsurface, geomechanical and geochemical changes during and after storage, enhancing trapping mechanism, the effect of H2S on CO2 storage and understanding the science of contaminant separation and areas of improvement in methodologies will be presented and highlighted.

360-degree stakeholder management driving successful CO2 storage research

2019 ◽  
Vol 59 (2) ◽  
pp. 565
Author(s):  
Aaron De Fina ◽  
Marc Chable ◽  
Cameron Wills
Keyword(s):  
Stakeholder Engagement ◽  
Carbon Capture ◽  
Oil And Gas ◽  
Stakeholder Management ◽  
Co2 Storage ◽  
Carbon Capture And Storage ◽  
Local Stakeholder ◽  
Regulatory Bodies ◽  
Storage Technologies ◽  
And Storage

The CO2CRC Otway Project continues to demonstrate that carbon capture and storage is a viable option for CO2 mitigation. The CO2CRC Otway Project is Australia’s first CO2 demonstration project, with two projects completed, involving geological storage of some 80000 tonnes of CO2 over the past 10 years. The project was initially authorised for a single stage with a finite life, but the growing requirements of the global carbon capture and storage community required further research on carbon capture and storage technologies and behaviour (via Stages 2 and 3), and so the project was extended. CO2CRC has undertaken 360-degree stakeholder engagement processes throughout the project, regularly consulting with regulators, governments, industry, partners, researchers and the community. This has been especially important as the project changed, operating in a niche space between Victorian environment, petroleum and water Acts. This process has allowed CO2CRC to contribute to alignment efforts within regulatory bodies, to enhance regulations to cover project activities, ensuring best practices are documented and observed to the satisfaction of the regulators and wider community. The Otway Basin in south-west Victoria is a region not immune to broader community concerns regarding the oil and gas and other industries. The surrounding area is predominately dairy farming, with locals relying heavily on the aquifers beneath their land. Although such a backdrop suggests potentially high levels of concern and scrutiny, especially when projects necessitate drilling or other invasive activities, the project has maintained strong local stakeholder engagement and support due to ongoing implementation and evaluation of the stakeholder management processes.

Carbon capture and storage in the oil and gas industry: 40 years on

2017 ◽  
Vol 57 (2) ◽  
pp. 413
Author(s):  
Christopher Consoli ◽  
Alex Zapantis ◽  
Peter Grubnic ◽  
Lawrence Irlam
Keyword(s):  
Oil Recovery ◽  
Energy Demand ◽  
Carbon Capture ◽  
Large Scale ◽  
Oil And Gas ◽  
Carbon Capture And Storage ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Wide Range ◽  
And Storage

In 1972, carbon dioxide (CO2) began to be captured from natural gas processing plants in West Texas and transported via pipeline for enhanced oil recovery (EOR) to oil fields also in Texas. This marked the beginning of carbon capture and storage (CCS) using anthropogenic CO2. Today, there are 22 such large-scale CCS facilities in operation or under construction around the world. These 22 facilities span a wide range of capture technologies and source feedstock as well as a variety of geologic formations and terrains. Seventeen of the facilities capture CO2 primarily for EOR. However, there are also several significant-scale CCS projects using dedicated geological storage options. This paper presents a collation and summary of these projects. Moving forward, if international climate targets and aspirations are to be achieved, CCS will increasingly need to be applied to all high emission industries. In addition to climate change objectives, the fundamentals of energy demand and fossil fuel supply strongly suggests that CCS deployment will need to be rapid and global. The oil and gas sector would be expected to be part of this deployment. Indeed, the oil and gas industry has led the deployment of CCS and this paper explores the future of CCS in this industry.

scholarly journals Análisis de ciclo de vida de la captura, uso y almacenamiento del bióxido de carbono de una central de generación eléctrica para la recuperación mejorada de petróleo

2014 ◽  
Author(s):  
◽  
Rodolfo Lacy Tamayo
Keyword(s):  
Power Plant ◽  
Natural Gas ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Co2 Capture ◽  
Electricity Generation ◽  
Carbon Capture ◽  
Renewable Energy Sources ◽  
Combined Cycle ◽  
Gas Emissions

Early projects of Carbon Capture, Use and Geological Storage (CCUS) could be feasible when fossil fuel-power plants are close to oil and gas reservoirs where CO2-Enhanced Oil Recovery (EOR) technologies are applicable. This Thesis includes estimates for greenhouse gas (GHG) emissions caused in a hypothetical CCUS case with a Natural Gas Combined Cycle power plant (NGCC), which were obtained by using Life-Cycle Assessment (LCA) methodology. This research comprises a comparison with other electricity-generation technologies, including Super Critical Pulverized Carbon (SCPC), NGCC without CO2 capture, geothermal, mini-hydro, wind and nuclear ones. The LCA stages that were undertaken in this study were natural gas supply system, electricity generation, CO2 capture, CO2 transport, EOR operations and environmental monitoring. Three different functional units were used in this study: MJ, kWh and produced oil barrel (bbl). Results indicate that energy produced by the described CCUS system has an environmental impact on climate change of 0.044 kgCO2e/MJ. The NGCC power plant with carbon capture unit would produce 0.177 kgCO2e/kWh, representing about 21% and 36% of the estimated values for the SCPC and NGCC (without CCS) cases respectively, and about 24% less greenhouse gas emissions than the geothermal scenario. The oil produced in the EOR activity has a greenhouse gas emissions of 38 kgCO2e/bbl, 37% less than the historical average in the US. In a “well to well” approach, closing the carbon cycle during primary energy production may become a competitive technology to renewable energy sources.

scholarly journals Advances in Underground Energy Storage for Renewable Energy Sources

2021 ◽  
Vol 11 (11) ◽  
pp. 5142
Author(s):  
Javier Menéndez ◽  
Jorge Loredo
Keyword(s):  
European Union ◽  
Renewable Energy ◽  
Energy Storage ◽  
Natural Gas ◽  
Greenhouse Gas ◽  
Fossil Fuels ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
The European Union ◽  
Coal Fuel

The use of fossil fuels (coal, fuel, and natural gas) to generate electricity has been reduced in the European Union during the last few years, involving a significant decrease in greenhouse gas emissions [...]

Understanding the Flow Dynamics of CO2 Plumes in the Subsurface

2021 ◽  
Author(s):  
Florence Letitia Bebb ◽  
Kate Clare Serena Evans ◽  
Jagannath Mukherjee ◽  
Bilal Saeed ◽  
Geovani Christopher
Keyword(s):  
Carbon Capture ◽  
Oil And Gas ◽  
Co2 Storage ◽  
Flow Dynamics ◽  
Hydrocarbon Exploration ◽  
Hydrocarbon Reservoir ◽  
Exploration And Production ◽  
And Migration ◽  
Carbon Dioxide Co2 ◽  
Hydrocarbon Exploration And Production

Abstract There are several significant differences between the behavior of injected CO2 and reservoired hydrocarbons in the subsurface. These fundamental differences greatly influence the modeling of CO2 plumes. Carbon capture, utilization, and storage (CCUS) is growing in importance in the exploration and production (E&P) regulatory environment with the Oil and Gas Climate Initiative (OGCI) making CCUS a priority. Companies need to prospect for storage sites and evaluate both the short-term risks and long-term fate of stored carbon dioxide (CO2). Understanding the physics governing fluid flow is important to both CO2 storage and hydrocarbon exploration and production. In the last decade, there has been much research into the movement and migration of CO2 in the subsurface. A better understanding of the flow dynamics of CO2 plumes in the subsurface has highlighted a number of significant differences in modeling CO2 storage sites compared with hydrocarbon reservoir simulations. These differences can greatly influence reliability when modeling CO2 storage sites.

Sign in / Sign up

Export Citation Format

Share Document