An Investigation on the Process of Reimbibition of Oil and Its Impact on Oil Recovery in the Yates Field

2021 ◽  
pp. 1-15
Author(s):  
Xiao Jin ◽  
Alhad Phatak ◽  
Aaron Sanders ◽  
Dawn Friesen ◽  
Ed Lewis ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Surfactant Solution ◽  
Core Sample ◽  
Wettability Alteration ◽  
Current Application ◽  
Initial Exposure ◽  
Rock Samples ◽  
Final Volume ◽  
External Phase ◽  
The Impact

Summary In mixed- to oil-wet reservoirs characterized by intense natural fracturing where the dominant displacement mechanism is gravity drainage, surfactant injection can lead to a shift in wettability and incremental oil production. In some cases, oil can also reimbibe back into the rock matrix after the oil saturation has been reduced upon initial exposure to surfactant, suggesting limited permanence in the wettability shift. The reimbibition phenomenon is investigated in this paper using Amott cells. Three cationic surfactants (C12-, C12–16-, C16-based) with interfacial tensions (IFT) between 0.18 and 0.95 mN/m were preselected to be evaluated. Current application of the C12-based surfactant in the Yates field is considered successful based on incremental oil recovery seen during the treatment. Silurian dolomite (SD) rock samples were flooded with Yates crude oil before being aged at 60°C for 6 weeks. For the imbibition tests, the aqueous surfactant solution was set as the external phase within the Amott cell, and the recovery of oil was recorded periodically. After the imbibition tests ended, the rock samples were placed in an inverse Amott cell with the Yates oil as the external phase. Baseline tests were first conducted to show that without a surfactant in the oil or brine, no imbibition occurred. With a surfactant concentration of 3,000 ppm, oil recovery at the end of the imbibition tests varied from 34 to 60% of the original oil volume in the core sample. During the reimbibition test, a large amount of oil was able to reimbibe into the rock, displacing the brine. Most of the displacement occurred within the first 2 weeks. The net oil recovery, taken as the final volume of oil recovered in the imbibition test minus the final volume of oil reimbibed into the rock, ranged from 0 to 18%. Given the possibility of surfactant dilution in field applications, another set of tests was conducted with 1,500 ppm. A reduction in oil recovery during imbibition was observed for all the tested surfactants. Partition coefficients were determined for each of the tested surfactants, and the ion-pair mechanism was used to explain the net oil recovery results. Lastly, the impact of rock permeability on reimbibition was investigated. Results show increasing permeability may lead to a linear response in oil reimbibition; therefore, minimizing the permeability range when selecting rock samples may be necessary when conducting the reimbibition test. The importance of oil reimbibition is demonstrated in the experimental study, and we make an argument for conducting both the imbibition and reimbibition tests to better evaluate surfactant efficacy. The improved understanding of wettability alteration should lead to advancements in chemical enhanced oil recovery (EOR) designs for field treatments.

An Investigation on the Process of Re-Imbibition of Oil and its Impact on Oil Recovery in the Yates Field

2021 ◽  
Author(s):  
Xiao Jin ◽  
Alhad Phatak ◽  
Aaron Sanders ◽  
Dawn Friesen ◽  
Ed Lewis ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Core Sample ◽  
Wettability Alteration ◽  
Initial Exposure ◽  
Rock Samples ◽  
Final Volume ◽  
External Phase ◽  
Incremental Oil Recovery ◽  
Dolomite Rock ◽  
The Impact

Abstract In mixed- to oil-wet reservoirs characterized by intense natural fracturing where the dominant displacement mechanism is gravity drainage, surfactant injection can lead to a shift in wettability and incremental oil production. In some cases, oil can also re-imbibe back into the rock matrix after the oil saturation has been reduced upon initial exposure to surfactant, suggesting limited permanence in the wettability shift. The re-imbibition phenomenon is investigated in this paper utilizing Amott cells. Three cationic surfactants (C12-, C12-16-, C16-based) solutions with interfacial tensions (IFT) between 0.18 to 0.95 mN/m were pre-selected to be evaluated. Current applications of the C12- based surfactant in the Yates field is considered successful based on incremental oil recovery seen during the treatment. Silurian dolomite rock samples were flooded with Yates crude oil before being aged at 140 °F for 6 weeks. For the imbibition tests, synthetic brine was set as the external phase within the Amott cell and the recovery of oil was recorded periodically. After the imbibition tests ended, the rock samples were placed in an inverse Amott cell with the Yates oil as the external phase. Baseline tests were first conducted to show that without a surfactant in the oil or brine, no imbibition occurred. With a surfactant concentration of 3,000 ppm, oil recovery at the end of the imbibition tests varied from 34% to 64% of the original oil volume in the core sample. During the re-imbibition test, a large amount of oil was able to re-imbibe into the rock, displacing the brine. Most of the displacement occurred within the first two weeks. The net oil recovery, taken as the final volume of oil recovered in the imbibition test minus the final volume of oil re-imbibed into the rock, ranged from 0% to 18%. Given the possibility of surfactant dilution in field applications, another set of tests were conducted with 1,500 ppm. A reduction in oil recovery during imbibition was observed for both the C12- based surfactant and the C12-16- mixture. Partition coefficients were determined for each of the tested surfactants and the ion pair mechanism was used to explain the net oil recovery results. Lastly, the impact of rock permeability on re-imbibition was investigated. Results show increasing permeability may lead to a linear response in oil re-imbibition,therefore minimizing the permeability range when selecting rock samples may be necessary when conducting the re-imbibition test. The importance of oil re-imbibition is demonstrated in the experimental study and we make an argument for conducting both the imbibition and re-imbibition tests to better evaluate surfactant efficacy. The improved understanding of wettability alteration should lead to advancements in chemical enhanced oil recovery designs for field treatments.

A New Dynamic Wettability-Alteration Model for Oil-Wet Cores During Surfactant-Solution Imbibition

SPE Journal ◽  
2013 ◽  
Vol 18 (05) ◽  
pp. 818-828 ◽  
Author(s):  
M. Hosein Kalaei ◽  
Don W. Green ◽  
G. Paul Willhite
Keyword(s):  
Experimental Data ◽  
Oil Recovery ◽  
History Matching ◽  
Mechanistic Model ◽  
Surfactant Solution ◽  
Experimental Tests ◽  
Quantitative Agreement ◽  
Wettability Alteration ◽  
Porous Rock ◽  
Surfactant Solutions

Summary Wettability modification of solid rocks with surfactants is an important process and has the potential to recover oil from reservoirs. When wettability is altered by use of surfactant solutions, capillary pressure, relative permeabilities, and residual oil saturations change wherever the porous rock is contacted by the surfactant. In this study, a mechanistic model is described in which wettability alteration is simulated by a new empirical correlation of the contact angle with surfactant concentration developed from experimental data. This model was tested against results from experimental tests in which oil was displaced from oil-wet cores by imbibition of surfactant solutions. Quantitative agreement between the simulation results of oil displacement and experimental data from the literature was obtained. Simulation of the imbibition of surfactant solution in laboratory-scale cores with the new model demonstrated that wettability alteration is a dynamic process, which plays a significant role in history matching and prediction of oil recovery from oil-wet porous media. In these simulations, the gravity force was the primary cause of the surfactant-solution invasion of the core that changed the rock wettability toward a less oil-wet state.

Phase Behavior, Wettability Alteration, and Oil Recovery of Low-Salinity Surfactant Solutions in Carbonate Reservoirs

SPE Journal ◽  
2020 ◽  
Vol 25 (04) ◽  
pp. 1784-1802 ◽  
Author(s):  
Sepideh Veiskarami ◽  
Arezou Jafari ◽  
Aboozar Soleymanzadeh
Keyword(s):  
Phase Behavior ◽  
Oil Recovery ◽  
Wettability Alteration ◽  
Study Phase ◽  
Low Salinity ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Favorable State ◽  
Phase Behaviors ◽  
The Impact

Summary Recent investigations have shown that treatment with injected brine composition can improve oil production. Various mechanisms have been suggested to go through the phenomenon; nevertheless, wettability alteration is one of the most commonly proposed mechanisms in the literature. Wettability alteration of the porous media toward a more favorable state reduces the capillary pressure, consequently contributing to the oil detachment from pore walls. In this study, phase behavior, oil recovery, and wettability alteration toward a more favorable state were investigated using a combination of formulations of surfactant and modified low-salinity (LS) brine. Phase behaviors of these various formulations were examined experimentally through observations on relative phase volumes. Experiments were performed in various water/oil ratios (WORs) in the presence of two different oil samples, namely C1 and C2. These experiments were conducted to clarify the impact of each affecting parameter; in particular, the impact of resin and asphaltene of crude oil on the performance of LS surfactant (LSS) flooding. Hereafter, the optimal formulation was flooded into the oil-wet micromodel. Optimum formulations increased the capillary number more than four orders of magnitude higher than that under formation brine (FB) flooding, thus causing oil recovery rates of 61 and 67% for oil samples C1 and C2, respectively. Likewise, the wettability alteration potential of optimized formulations was studied through contact angle measurements. Results showed that LS and LSS solutions could act as possible wettability alternating methods for oil-wet carbonate rocks. Using the optimum formulation resulted in a wettability alteration index (WAI) of 0.66 for sample C1 and 0.49 for sample C2, while using LS brine itself ended in 0.51 and 0.29 for oil samples C1 and C2, respectively.

Impact of clay type and water composition on low salinity water injection – visualisation approach

2018 ◽  
Vol 58 (1) ◽  
pp. 51 ◽  
Author(s):  
Tammy Amirian ◽  
Manouchehr Haghighi
Keyword(s):  
Oil Recovery ◽  
Wettability Alteration ◽  
Oil Film ◽  
Low Salinity ◽  
Water Composition ◽  
Low Salinity Water ◽  
Monovalent Ions ◽  
Salinity Water ◽  
The Impact ◽  
Clay Type

Low salinity water (LSW) injection as an enhanced oil recovery method has attracted much attention in the past two decades. Previously, it was found that the presence of clay such as kaolinite and water composition like the nature of cations affect the enhancement of oil recovery under LSW injection. In this study, a pore-scale visualisation approach was developed using a 2D glass micromodel to investigate the impact of clay type and water composition on LSW injection. The glass micromodels were coated by kaolinite and illite. A meniscus moving mechanism was observed and the oil–water interface moved through narrow throats to large bodies, displacing the wetting phase (oil phase). In the presence of kaolinite, the effect of LSW injection was reflected in the change to the wettability with a transition towards water-wetness in the large sections of the pore walls. The advance of the stable water front left behind an oil film on the oil-wet portions of pore walls; however, in water-wet surfaces, the interface moved towards the surface and replaced the oil film. As a result of wettability alteration towards a water-wet state, the capillary forces were not dominant throughout the system and the water–oil menisci displaced oil in large portions of very narrow channels. This LSW effect was not observed in the presence of illite. With regard to the water composition effect, systems containing divalent cations like Ca2+ showed the same extent of recovery as those containing only monovalent ions. The observation indicates a significant role of cation exchange in wettability alteration. Fines migration was insignificant in the observations.

Surfactant-Aided Low-Salinity Waterflooding for Low-Temperature Carbonate Reservoirs

SPE Journal ◽  
2021 ◽  
pp. 1-17
Author(s):  
Yue Shi ◽  
Chammi Miller ◽  
Kishore Mohanty
Keyword(s):  
Low Temperature ◽  
Oil Recovery ◽  
Anionic Surfactants ◽  
Surfactant Solution ◽  
Carbonate Reservoirs ◽  
Spontaneous Imbibition ◽  
Wettability Alteration ◽  
Low Salinity ◽  
Low Salinity Waterflooding ◽  
Original Oil In Place

Summary Carbonate reservoirs tend to be oil-wet/mixed-wet and heterogeneous because of mineralogy and diagenesis. The objective of this study is to improve oil recovery in low-temperature dolomite reservoirs using low-salinity and surfactant-aided spontaneous imbibition. The low-salinity brine composition was optimized using ζ-potential measurements, contact-angle (CA) experiments, and a novel wettability-alteration measure. Significant wettability alteration was observed on dolomite rocks at a salinity of 2,500 ppm. We evaluated 37 surfactants by performing CA, interfacial-tension (IFT), and spontaneous-imbibition experiments. Three (quaternary ammonium) cationic and one (sulfonate) anionic surfactants showed significant wettability alteration and produced 43–63% of original oil in place (OOIP) by spontaneous imbibition. At a low temperature (35°C), oil recovery by low-salinity effect is small compared with that by wettability-altering surfactants. Coreflood tests were performed with a selected low-salinity cationic surfactant solution. A novel coreflood was proposed that modeled heterogeneity and dynamic imbibition into low-permeability regions. The results of the “heterogeneous” coreflood were consistent with that of spontaneous-imbibition tests. These experiments demonstrated that a combination of low-salinity brine and surfactants can make originally oil-wet dolomite rocks more water-wet and improve oil recovery from regions bypassed by waterflood at a low temperature of 35°C.

The Impact of Nanoparticles Adsorption and Transport on Wettability Alteration of Intermediate Wet Berea Sandstone

2015 ◽  
Author(s):  
Shidong Li ◽  
Ole Torsæter
Keyword(s):  
Pressure Drop ◽  
Oil Recovery ◽  
Fluid Pressure ◽  
Injection Pressure ◽  
Wettability Alteration ◽  
Colloidal Nanoparticles ◽  
Berea Sandstone ◽  
Nano Structure ◽  
The Core ◽  
The Impact

AbstractNanoparticles as part of nanotechnology have drawn the attention for its great potential of increasing oil recovery. From authors' previous studies (Li et al., 2013a), wettability alteration was proposed as one of the main Enhanced Oil Recovery (EOR) mechanisms for nanoparticles fluid, as adsorption of nanoparticles on pore walls leads to wettability alteration of reservoir. We conducted a series of wettability measurement experiments for aged intermediate-wet Berea sandstone, where the core plugs were treated by different concentration and type of nanoparticles fluid. Nanoparticles transport experiments also were performed for core plugs with injection of varying concentration and type of nanoparticles fluid. Pressure drop across the core plug during injection was recorded to evaluate nanoparticles adsorption and retention inside core, as well as desorption during brine postflush. Both hydrophilic silica nano-structure particles and hydrophilic silica colloidal nanoparticles were utilized in above two experiments.The results of wettability alteration experiments indicated that hydrophilic nanoparticles have ability of making intermediate-wet Berea sandstone to be more water wet, and basically the higher concentration the more water wet will be. And different type of nanoparticles has different effect on the wettability alteration process. For nanoparticles transport experiments, the results showed that the nanoparticles undergo both adsorption and desorption as well as retention during injection. Pressure drop curves showed that absorption and retention of nano-structure particles inside core was significant while colloidal nanoparticles did not adsorb much. Permeability impairment was observed during nano-structure particles fluid injection, but on the contrary colloidal nanoparticles dispersion injection made core more permeable.

scholarly journals Recent Advances in Nanoparticles Enhanced Oil Recovery: Rheology, Interfacial Tension, Oil Recovery, and Wettability Alteration

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Muhammad Shahzad Kamal ◽  
Ahmad A. Adewunmi ◽  
Abdullah S. Sultan ◽  
Mohammed F. Al-Hamad ◽  
Umer Mehmood
Keyword(s):  
Interfacial Tension ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Mobility Ratio ◽  
Wettability Alteration ◽  
Factors Affecting ◽  
Recent Advances ◽  
The Impact ◽  
Recovery Methods

Chemically enhanced oil recovery methods are utilized to increase the oil recovery by improving the mobility ratio, altering the wettability, and/or lowering the interfacial tension between water and oil. Surfactants and polymers have been used for this purpose for the last few decades. Recently, nanoparticles have attracted the attention due to their unique properties. A large number of nanoparticles have been investigated for enhanced oil recovery applications either alone or in combination with surfactants and/or polymers. This review discusses the various types of nanoparticles that have been utilized in enhanced oil recovery. The review highlights the impact of nanoparticles on wettability alteration, interfacial tension, and rheology. The review also covers the factors affecting the oil recovery using nanoparticles and current challenges in field implementation.

Pore Scale Study of the Effects of Wettability Alteration on Enhanced Oil Recovery

2021 ◽  
Author(s):  
Weipeng Yang ◽  
Jun Lu
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Surfactant Solution ◽  
Recovery Process ◽  
Wettability Alteration ◽  
Immiscible Displacement ◽  
Microfluidic Chips ◽  
Pore Scale ◽  
Low Velocity ◽  
Different Characteristics

Abstract Drainage displacement at unfavorable viscosity ratios is often encountered in oil recovery process, which significantly limits the oil recovery. Surfactants have been extensively used as wettability modifier to improve the hydrocarbon recovery from rock matrix by imbibition, but little attention has been paid to the use of surfactant-aided wettability alteration to suppress fingering during displacement. In this study, we investigate the surfactant-aided immiscible displacement in oil-wet microfluidic chips. We find that the change of advancing contact angle by surfactant is velocity dependent and stable displacement can be achieved at low velocity when surfactant solution is used at the injection fluid. In comparison, fingering occurs at all capillary numbers for water injection, resulting in low oil recovery. Besides, the generation of oil ganglion during waterflooding and surfactant flooding exhibits completely different characteristics. Our study reveals the pore-scale mechanism of surfactant-aided wettability on the immiscible displacement, which is important for highly efficient oil recovery.

scholarly journals Feasibility Investigation of A Novel Natural Surfactant Extracted from Eucalyptus Leaves for Enhanced Oil Recovery of Carbonates: Experimental Study

2018 ◽  
Vol 1 (1) ◽  
Keyword(s):  
Oil Recovery ◽  
Pore Space ◽  
Low Cost ◽  
Surfactant Solution ◽  
Wettability Alteration ◽  
Chemical Flooding ◽  
Reservoir Rocks ◽  
Eucalyptus Leaves ◽  
Natural Surfactant ◽  
Oil Water

After primary and secondary oil production from carbonate reservoirs, approximately 60% oil-in-place remains in the pore space of reservoir rocks. Chemical flooding is one of the promising ways to produce the remained oil. Nowadays, surfactant flooding is a low-cost and a common method generally used to improve oil recovery due to the oil-water Interfacial Tension (IFT) reduction and alteration of the rock wettability to water-wet state, leading to decrease the capillary number. In this study, a novel leaf-derived non-ionic natural surfactant, named Eucalyptus is introduced and the capability of this natural surfactant for IFT reduction and wettability alteration is analyzed. Accordingly, the natural surfactant was derived from Eucalyptus leaves and the effect of natural surfactant solution on the Oil-water IFT and carbonate rock wettability alteration was investigated. The results demonstrated that the addressed natural surfactant significantly reduced IFT value from 35.2 mN/m to 10.5 mN/m (at CMC of 3.5 wt. %) and the contact angle value from 140.6° to 60.2°. As a result, Compared to conventional chemical surfactants, the Eucalyptus natural surfactant had an excellent surface chemical activity and confirmed its performance by laboratory experiments which could be used for EOR applications.

Sign in / Sign up

Export Citation Format

Share Document