The Influence of Lithofacies Features of a Deposit on the Efficiency of Reserves Recovery

2021 ◽  
Author(s):  
Shamil Khanifovich Sultanov ◽  
Daria Yurievna Chudinova ◽  
Alexander Vyacheslavovich Chibisov ◽  
Eugene Mikhailovich Makhnitkin ◽  
Lily Ramilevna Kharisova ◽  
...  
Keyword(s):  
Flow Rate ◽  
Distribution Channel ◽  
Oil Field ◽  
Reservoir Rock ◽  
Low Flow ◽  
Clay Material ◽  
Facies Classification ◽  
Geological Models ◽  
Production Wells ◽  
Facies Zone

Abstract The main task in petroleum engineering is to achieve the maximum possible production of hydrocarbon reserves with low expenditures. Many reasons influence the economics of the project. And one of them is related to choosing the right location for drilling a well in order to produce unrecovered hydrocarbons. The choice of this place has a direct correlation with the geological aspects of an oil field. This paper showed that different facies have a great influence on reserves recovery on the example of the South-Vyintoyskoye field. The classification of facies involved the study of production data. This study was presented by analysis of core sample, application of models by Muromtsev, reading of well logs, and build-up of geological models. The construction of geological models involved work in IRAP RMS TEMPEST, CorelDRAW, Geoglobe, Roxar Program package. The subject of study was the reservoir rock BV7/3-4that is a part of the Barremian age formation. It was concluded that this reservoir rock is composed of mainly argillaceous sandstones, interbedded with siltstones and shales. Authors identified that this formation belongs to three different depositional facies. The facies classification showed that the A1 zone is associated with well-graded fine to the fine-grained size of sediments. The reservoir rock of this zone is composed of sediments that belong to the distribution channel of deltas. And as a result, it is characterized by its high flow rate of production wells. The reservoir rock of the A2 facies zone is composed of sediments that are related to the collapse of mouth bars and branches of deltas. This zone has difficulties in fluid migration due to the presence of heterogeneities and clay material as well as the drilling of new wells close to the given zone lead to the medium flow rate of production wells. The reservoir rock of the A3 facies zone is composed of sediments that belong to turbidity flows. In this zone, organic matter has been recognized as a group of ichnofacies such as "Cruziana". This zone is characterized by the low flow rates of the production wells.

Pigging Technique Research of Submarine Gas Line in the Bo-Xi Oil Field

2008 ◽  
Author(s):  
Xiaojiao Cheng ◽  
Da Yu
Keyword(s):  
Flow Rate ◽  
Gas Pipeline ◽  
Oil Field ◽  
Low Flow ◽  
Low Flow Rate

In order to deal with the single seal of ball valves and the deformation of the plugged gas pipeline at low flow rate, a foam pig was successfully modified and used in the plugged submarine gas line of the Bo-Xi Oil Field.

scholarly journals Improving the efficiency of terrigenous oil-saturated reservoir development by the system of oriented selective slotted channels

2021 ◽  
Vol 246 ◽  
pp. 660-666
Author(s):  
Sergei CHERNYSHOV ◽  
Vera Repina ◽  
Nikolay Krysin ◽  
David Macdonald
Keyword(s):  
Flow Rate ◽  
Oil Field ◽  
Oil Saturation ◽  
Reservoir Rocks ◽  
Recoverable Reserves ◽  
Reservoir Development ◽  
Production Wells ◽  
Cumulative Production ◽  
Selective Formation ◽  
Perm Region

A comparative assessment of variation in the flow rate of oil production wells was performed taking into account increasing of perforated area of the productive part of the rocks, as well as recover of reservoir rocks permeability due to their unloading by creating slotted channels with the method of oriented slotted hydro-sandblast perforation. Different orientation directions and slotting intervals were analyzed, taking into account water encroachment of individual interlayers and azimuth direction of the majority of remaining reserves in separate blocks of the examined formation. In order to estimate development efficiency of terrigenous oil-saturated porous-type reservoirs by means of oriented slotted hydro-sandblast perforation, calculations were performed on a full-scale geological and hydrodynamic model of an oil field in the Perm Region. The object of modeling was a Visean terrigenous productive formation. The modeling of implementing oriented slotted hydro-sandblast perforation was carried out on a 3D filtration model for fourteen marginal wells, located in the zone with excessive density of remaining recoverable reserves and heterogeneous reserve recovery along the section. An optimal layout of slotted channels along the depth of the productive part of the well section was developed. Selective formation of 24 slotted channels was carried out considering the intervals of increased oil saturation. Comparative analysis of estimated flow rate of the wells was performed for cumulative perforation of the examined productive formation and the developed method of slotted perforation. As a result of modeling, an increase in the oil average flow rate of 2.25 t/day was obtained. With oriented slotted hydro-sandblast perforation, incremental cumulative production for two years of prediction calculations per one well reached 0.5 thousand t.

scholarly journals Backflow effects on mass flow gain factor in a centrifugal pump

2021 ◽  
Vol 104 (2) ◽  
pp. 003685042199886
Author(s):  
Wenzhe Kang ◽  
Lingjiu Zhou ◽  
Dianhai Liu ◽  
Zhengwei Wang
Keyword(s):  
Centrifugal Pump ◽  
Mass Flow ◽  
Flow Rate ◽  
Low Frequency ◽  
Gain Factor ◽  
Low Flow ◽  
Cavity Volume ◽  
Cavitating Flows ◽  
Inlet Tube ◽  
Low Flow Rate

Previous researches has shown that inlet backflow may occur in a centrifugal pump when running at low-flow-rate conditions and have nonnegligible effects on cavitation behaviors (e.g. mass flow gain factor) and cavitation stability (e.g. cavitation surge). To analyze the influences of backflow in impeller inlet, comparative studies of cavitating flows are carried out for two typical centrifugal pumps. A series of computational fluid dynamics (CFD) simulations were carried out for the cavitating flows in two pumps, based on the RANS (Reynolds-Averaged Naiver-Stokes) solver with the turbulence model of k- ω shear stress transport and homogeneous multiphase model. The cavity volume in Pump A (with less reversed flow in impeller inlet) decreases with the decreasing of flow rate, while the cavity volume in Pump B (with obvious inlet backflow) reach the minimum values at δ = 0.1285 and then increase as the flow rate decreases. For Pump A, the mass flow gain factors are negative and the absolute values increase with the decrease of cavitation number for all calculation conditions. For Pump B, the mass flow gain factors are negative for most conditions but positive for some conditions with low flow rate coefficients and low cavitation numbers, reaching the minimum value at condition of σ = 0.151 for most cases. The development of backflow in impeller inlet is found to be the essential reason for the great differences. For Pump B, the strong shearing between backflow and main flow lead to the cavitation in inlet tube. The cavity volume in the impeller decreases while that in the inlet tube increases with the decreasing of flow rate, which make the total cavity volume reaches the minimum value at δ = 0.1285 and then the mass flow gain factor become positive. Through the transient calculations for cavitating flows in two pumps, low-frequency fluctuations of pressure and flow rate are found in Pump B at some off-designed conditions (e.g. δ = 0.107, σ = 0.195). The relations among inlet pressure, inlet flow rate, cavity volume, and backflow are analyzed in detail to understand the periodic evolution of low-frequency fluctuations. Backflow is found to be the main reason which cause the positive value of mass flow gain factor at low-flow-rate conditions. Through the transient simulations of cavitating flow, backflow is considered as an important aspect closely related to the hydraulic stability of cavitating pumping system.

Assessment of the Use of Humidified Nasal Cannulas for Oxygen Therapy in Patients with Epistaxis

ORL ◽  
2021 ◽  
pp. 1-5
Author(s):  
Jingjing Liu ◽  
Tengfang Chen ◽  
Zhenggang Lv ◽  
Dezhong Wu
Keyword(s):  
Flow Rate ◽  
Oxygen Therapy ◽  
Preliminary Investigation ◽  
Nasal Cannula ◽  
Low Flow ◽  
Antiplatelet Drugs ◽  
Flow Rates ◽  
The Past ◽  
Oxygen Inhalation ◽  
Significant Difference

<b><i>Introduction:</i></b> In China, nasal cannula oxygen therapy is typically humidified. However, it is difficult to decide whether to suspend nasal cannula oxygen inhalation after the nosebleed has temporarily stopped. Therefore, we conducted a preliminary investigation on whether the use of humidified nasal cannulas in our hospital increases the incidence of epistaxis. <b><i>Methods:</i></b> We conducted a survey of 176,058 inpatients in our hospital and other city branches of our hospital over the past 3 years and obtained information concerning their use of humidified nasal cannulas for oxygen inhalation, nonhumidified nasal cannulas, anticoagulant and antiplatelet drugs, and oxygen inhalation flow rates. This information was compared with the data collected at consultation for epistaxis during these 3 years. <b><i>Results:</i></b> No significant difference was found between inpatients with humidified nasal cannulas and those without nasal cannula oxygen therapy in the incidence of consultations due to epistaxis (χ<sup>2</sup> = 1.007, <i>p</i> &#x3e; 0.05). The same trend was observed among hospitalized patients using anticoagulant and antiplatelet drugs (χ<sup>2</sup> = 2.082, <i>p</i> &#x3e; 0.05). Among the patients with an inhaled oxygen flow rate ≥5 L/min, the incidence of ear-nose-throat (ENT) consultations due to epistaxis was 0. No statistically significant difference was found between inpatients with a humidified oxygen inhalation flow rate &#x3c;5 L/min and those without nasal cannula oxygen therapy in the incidence of ENT consultations due to epistaxis (χ<sup>2</sup> = 0.838, <i>p</i> &#x3e; 0.05). A statistically significant difference was observed in the incidence of ENT consultations due to epistaxis between the low-flow nonhumidified nasal cannula and nonnasal cannula oxygen inhalation groups (χ<sup>2</sup> = 18.428, <i>p</i> &#x3c; 0.001). The same trend was observed between the 2 groups of low-flow humidified and low-flow nonhumidified nasal cannula oxygen inhalation (χ<sup>2</sup> = 26.194, <i>p</i> &#x3c; 0.001). <b><i>Discussion/Conclusion:</i></b> Neither high-flow humidified nasal cannula oxygen inhalation nor low-flow humidified nasal cannula oxygen inhalation will increase the incidence of recurrent or serious epistaxis complications; the same trend was observed for patients who use anticoagulant and antiplatelet drugs. Humidification during low-flow nasal cannula oxygen inhalation can prevent severe and repeated epistaxis to a certain extent.

scholarly journals Effect of Air Injection on the Internal Flow Characteristics in the Draft Tube of a Francis Turbine Model

Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1182
Author(s):  
Seung-Jun Kim ◽  
Yong Cho ◽  
Jin-Hyuk Kim
Keyword(s):  
Flow Rate ◽  
Draft Tube ◽  
Pressure Fluctuations ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Air Injection ◽  
Low Flow ◽  
Francis Turbine ◽  
Navier Stokes ◽  
Vortex Rope

Under low flow-rate conditions, a Francis turbine exhibits precession of a vortex rope with pressure fluctuations in the draft tube. These undesirable flow phenomena can lead to deterioration of the turbine performance as manifested by torque and power output fluctuations. In order to suppress the rope with precession and a swirl component in the tube, the use of anti-swirl fins was investigated in a previous study. However, vortex rope generation still occurred near the cone of the tube. In this study, unsteady-state Reynolds-averaged Navier–Stokes analyses were conducted with a scale-adaptive simulation shear stress transport turbulence model. This model was used to observe the effects of the injection in the draft tube on the unsteady internal flow and pressure phenomena considering both active and passive suppression methods. The air injection affected the generation and suppression of the vortex rope and swirl component depending on the flow rate of the air. In addition, an injection level of 0.5%Q led to a reduction in the maximum unsteady pressure characteristics.

Simultaneous Measuring Method for Both Volumetric Flow Rates of Air-Water Mixture Using a Turbine Flowmeter

1996 ◽  
Vol 118 (1) ◽  
pp. 29-35 ◽  
Author(s):  
K. Minemura ◽  
K. Egashira ◽  
K. Ihara ◽  
H. Furuta ◽  
K. Yamamoto
Keyword(s):  
Pressure Drop ◽  
Flow Rate ◽  
Volumetric Flow Rate ◽  
Oil Field ◽  
Liquid Density ◽  
Water Mixture ◽  
Rotor Speed ◽  
Flow Rates ◽  
Field Development ◽  
Turbine Flowmeter

A turbine flowmeter is employed in this study in connection with offshore oil field development, in order to measure simultaneously both the volumetric flow rates of air-water two-phase mixture. Though a conventional turbine flowmeter is generally used to measure the single-phase volumetric flow rate by obtaining the rotational rotor speed, the method proposed additionally reads the pressure drop across the meter. After the pressure drop and rotor speed measured are correlated as functions of the volumetric flow ratio of the air to the whole fluid and the total volumetric flow rate, both the flow rates are iteratively evaluated with the functions on the premise that the liquid density is known. The evaluated flow rates are confirmed to have adequate accuracy, and thus the applicability of the method to oil fields.

Measurement and Modeling of Condensation Heat Transfer Coefficients in Circular Microchannels

2006 ◽  
Vol 128 (10) ◽  
pp. 1050-1059 ◽  
Author(s):  
Todd M. Bandhauer ◽  
Akhil Agarwal ◽  
Srinivas Garimella
Keyword(s):  
Heat Transfer ◽  
Flow Rate ◽  
Heat Transfer Model ◽  
Condensation Heat Transfer ◽  
Low Flow ◽  
Transfer Model ◽  
Shear Stresses ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Circular Microchannels

A model for predicting heat transfer during condensation of refrigerant R134a in horizontal microchannels is presented. The thermal amplification technique is used to measure condensation heat transfer coefficients accurately over small increments of refrigerant quality across the vapor-liquid dome (0<x<1). A combination of a high flow rate closed loop primary coolant and a low flow rate open loop secondary coolant ensures the accurate measurement of the small heat duties in these microchannels and the deduction of condensation heat transfer coefficients from measured UA values. Measurements were conducted for three circular microchannels (0.506<Dh<1.524mm) over the mass flux range 150<G<750kg∕m2s. Results from previous work by the authors on condensation flow mechanisms in microchannel geometries were used to interpret the results based on the applicable flow regimes. The heat transfer model is based on the approach originally developed by Traviss, D. P., Rohsenow, W. M., and Baron, A. B., 1973, “Forced-Convection Condensation Inside Tubes: A Heat Transfer Equation For Condenser Design,” ASHRAE Trans., 79(1), pp. 157–165 and Moser, K. W., Webb, R. L., and Na, B., 1998, “A New Equivalent Reynolds Number Model for Condensation in Smooth Tubes,” ASME, J. Heat Transfer, 120(2), pp. 410–417. The multiple-flow-regime model of Garimella, S., Agarwal, A., and Killion, J. D., 2005, “Condensation Pressure Drop in Circular Microchannels,” Heat Transfer Eng., 26(3), pp. 1–8 for predicting condensation pressure drops in microchannels is used to predict the pertinent interfacial shear stresses required in this heat transfer model. The resulting heat transfer model predicts 86% of the data within ±20%.

Simulation on Linear-Motor-Driven Water Hydraulic Reciprocating Plunger Pump

2013 ◽  
Vol 842 ◽  
pp. 530-535 ◽  
Author(s):  
Zeng Meng Zhang ◽  
Yong Jun Gong ◽  
Jiao Yi Hou ◽  
Han Peng Wu
Keyword(s):  
Flow Rate ◽  
Deep Sea ◽  
High Efficiency ◽  
Control Method ◽  
Sea Water ◽  
Linear Motor ◽  
Low Flow ◽  
Flow Pulsation ◽  
Plunger Pump ◽  
Water Hydraulic

The water hydraulic reciprocating plunger pump driven by linear motor is suitable to deep sea application with high efficiency and variable control. Aiming to study the principle structure and working characteristics of the pump, two patterns of valve and piston distribution were designed. And the control method and the performance were analyzed by simulation based on the AMESim model. The results show that the pressure and flow pulsation of piston type pump are much smaller than the valve type, even though the piston type is large in scale and works at low flow rate. Compared with a valve distribution tri-linear-motor reciprocating plunger pump (VDTLMP), as the flow rate of the piston distribution double linear motor reciprocating plunger pump (PDDLMP) is decreased from 36.7 L/min to 21.2 L/min theoretically, the pressure pulsation amplitude is decreased from 46% to 2%, and the flow pulsation rate is also decreased from 0.266 to 0.007. These results contribute to the research on deep-sea water hydraulic power pack and direct drive pump with high efficiency and energy conservation.

Sign in / Sign up

Export Citation Format

Share Document