First Case Study for Litho-Petro-Elastic AVA Pre-Stack Inversion for Complex Tight Reservoirs Miocene – Upper Cretaceous in East Onshore Abu Dhabi

2021 ◽  
Author(s):  
Khalid Obaid ◽  
Abdelwahab Noufal ◽  
Abdulrahman Almessabi ◽  
Atef Abdelaal ◽  
Karim Elsadany ◽  
...  
Keyword(s):  
Seismic Data ◽  
Upper Cretaceous ◽  
Reservoir Characterization ◽  
Rock Physics ◽  
Seismic Interpretation ◽  
Abu Dhabi ◽  
Seismic Exploration ◽  
Frequency Model ◽  
Structural Framework ◽  
First Case

Abstract This study summarizes the efforts taken to provide reliable reservoir characterizations products to mitigate seismic interpretation challenges and delineation of the reservoirs. ADNOC has conducted seismic exploration activities to assess Miocene to Upper Cretaceous aged reservoirs in East Onshore Abu Dhabi. The Oligo-Miocene section comprises of interbedded salt (mainly halite), anhydrite, limestones and marls. Deposited in the foreland basin related to the Oman thrust-belt. Ranging in thickness from nearly 1.5 km in the depocenter to almost nil on the forebulge located to the west of the studied area. The well data based geological model suggests that initially porous rocks (presumably grain-supported carbonates) encompassed polyphase sulfate cementation during recurrent subaerial exposure in which pores and grains were recrystallized sometimes completely too massive, tight anhydrite beds. This heterogeneity of the complex shallow section showing high variation of velocity impact seismic imaging, and interpretation to model the stratigraphic/structural framework and link it with reservoir characterization. Hence, ADNOC decided to conduct a trial on state-of-art technique Litho-Petro-Elastic (LPE) AVA Inversion to mitigate the seismic interpretation challenges and delineate the reservoirs. The LPE AVA inversion provides a single-loop approach to reservoir characterization based on rock physics models and compaction trends, reducing the dependency on a detailed prior the low frequency model, Where the rock modelling and lithology classification are not separate steps but interact directly with the seismic AVO inversion for optimal estimates of lithologies and elastic properties. The LPE inversion scope requires seismic data conditioning such as CMP gathers de-noising, de-multiple, flattening and amplitude preservation, in addition to detailed log conditioning, petro-elastic and rock physics analysis to maximize the quality and value of the results. The study proved that the LPE AVA Inversion can be used to guide seismic interpreters in mapping the structural framework in challenging seismic data, as it managed to improve the prospect evaluation.

scholarly journals Seismic Interpretation and Inversion Leading to an Accurate Reservoir Characterization in a Carbonate Environment

2021 ◽  
Vol 2 (12) ◽  
pp. 1229-1230
Author(s):  
Yasir Bashir ◽  
Nordiana Mohd Muztaza ◽  
Nur Azwin Ismail ◽  
Ismail Ahmad Abir ◽  
Andy Anderson Bery ◽  
...  
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
Reservoir Characterization ◽  
Rock Physics ◽  
Seismic Inversion ◽  
Seismic Interpretation ◽  
And Inversion

Seismic data acquired in the field show the subsurface reflectors or horizon among the geological strata, while the seismic inversion converts this reflector information into the acoustic impedance section which shows the layer properties based on lithology. The research aims to predict the porosity to identify the reservoir which is in between the tight layer. So, the output of the seismic inversion is much more batter than the seismic as it is closer to reality such as geology. Seismic inversion is frequently used to determine rock physics properties, for example, acoustic impedance and porosity.

Seismic reservoir characterization of the Bone Spring and Wolfcamp Formations in the Delaware Basin: Challenges and uncertainty in characterization using rock physics — A case study: Part 2

2020 ◽  
Vol 8 (4) ◽  
pp. T1057-T1069
Author(s):  
Ritesh Kumar Sharma ◽  
Satinder Chopra ◽  
Larry Lines
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Rock Physics ◽  
Well Log ◽  
Data Set ◽  
Frequency Model ◽  
Log Data ◽  
Delaware Basin ◽  
Seismic Reservoir

The discrimination of fluid content and lithology in a reservoir is important because it has a bearing on reservoir development and its management. Among other things, rock-physics analysis is usually carried out to distinguish between the lithology and fluid components of a reservoir by way of estimating the volume of clay, water saturation, and porosity using seismic data. Although these rock-physics parameters are easy to compute for conventional plays, there are many uncertainties in their estimation for unconventional plays, especially where multiple zones need to be characterized simultaneously. We have evaluated such uncertainties with reference to a data set from the Delaware Basin where the Bone Spring, Wolfcamp, Barnett, and Mississippian Formations are the prospective zones. Attempts at seismic reservoir characterization of these formations have been developed in Part 1 of this paper, where the geologic background of the area of study, the preconditioning of prestack seismic data, well-log correlation, accounting for the temporal and lateral variation in the seismic wavelets, and building of robust low-frequency model for prestack simultaneous impedance inversion were determined. We determine the challenges and the uncertainty in the characterization of the Bone Spring, Wolfcamp, Barnett, and Mississippian sections and explain how we overcame those. In the light of these uncertainties, we decide that any deterministic approach for characterization of the target formations of interest may not be appropriate and we build a case for adopting a robust statistical approach. Making use of neutron porosity and density porosity well-log data in the formations of interest, we determine how the type of shale, volume of shale, effective porosity, and lithoclassification can be carried out. Using the available log data, multimineral analysis was also carried out using a nonlinear optimization approach, which lent support to our facies classification. We then extend this exercise to derived seismic attributes for determination of the lithofacies volumes and their probabilities, together with their correlations with the facies information derived from mud log data.

Reservoir Prediction Under Control of Sedimentary Facies

2017 ◽  
Vol 25 (03) ◽  
pp. 1750022
Author(s):  
Xiuwei Yang ◽  
Peimin Zhu
Keyword(s):  
Seismic Data ◽  
Low Frequency ◽  
Prediction Method ◽  
Rock Physics ◽  
Real Data ◽  
Sedimentary Facies ◽  
Seismic Inversion ◽  
Rock Properties ◽  
Reservoir Prediction ◽  
Frequency Model

Acoustic impedance (AI) from seismic inversion can indicate rock properties and can be used, when combined with rock physics, to predict reservoir parameters, such as porosity. Solutions to seismic inversion problem are almost nonunique due to the limited bandwidth of seismic data. Additional constraints from well log data and geology are needed to arrive at a reasonable solution. In this paper, sedimentary facies is used to reduce the uncertainty in inversion and rock physics modeling; the results not only agree with seismic data, but also conform to geology. A reservoir prediction method, which incorporates seismic data, well logs, rock physics and sedimentary facies, is proposed. AI was first derived by constrained sparse spike inversion (CSSI) using a sedimentary facies dependent low-frequency model, and then was transformed to reservoir parameters by sequential simulation, statistical rock physics and [Formula: see text]-model. Two numerical experiments using synthetic model and real data indicated that the sedimentary facies information may help to obtain a more reasonable prediction.

Accuracy of wavelets, seismic inversion, and thin-bed resolution

2017 ◽  
Vol 5 (4) ◽  
pp. T523-T530
Author(s):  
Ehsan Zabihi Naeini ◽  
Mark Sams
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Low Frequency ◽  
Seismic Inversion ◽  
Inversion Method ◽  
Frequency Content ◽  
Frequency Model ◽  
North West ◽  
The North ◽  
Well Data

Broadband reprocessed seismic data from the North West Shelf of Australia were inverted using wavelets estimated with a conventional approach. The inversion method applied was a facies-based inversion, in which the low-frequency model is a product of the inversion process itself, constrained by facies-dependent input trends, the resultant facies distribution, and the match to the seismic. The results identified the presence of a gas reservoir that had recently been confirmed through drilling. The reservoir is thin, with up to 15 ms of maximum thickness. The bandwidth of the seismic data is approximately 5–70 Hz, and the well data used to extract the wavelet used in the inversion are only 400 ms long. As such, there was little control on the lowest frequencies of the wavelet. Different wavelets were subsequently estimated using a variety of new techniques that attempt to address the limitations of short well-log segments and low-frequency seismic. The revised inversion showed greater gas-sand continuity and an extension of the reservoir at one flank. Noise-free synthetic examples indicate that thin-bed delineation can depend on the accuracy of the low-frequency content of the wavelets used for inversion. Underestimation of the low-frequency contents can result in missing thin beds, whereas underestimation of high frequencies can introduce false thin beds. Therefore, it is very important to correctly capture the full frequency content of the seismic data in terms of the amplitude and phase spectra of the estimated wavelets, which subsequently leads to a more accurate thin-bed reservoir characterization through inversion.

Creating detailed subsurface models using predictive image-guided well-log interpolation

2017 ◽  
Vol 5 (3) ◽  
pp. T279-T285 ◽  
Author(s):  
Parvaneh Karimi ◽  
Sergey Fomel ◽  
Rui Zhang
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Structural Information ◽  
Rock Properties ◽  
Well Log ◽  
Initial Model ◽  
The North ◽  
Structural Framework ◽  
Seismic Image ◽  
Seismic Reflectors

Integration of well-log data and seismic data to predict rock properties is an essential but challenging task in reservoir characterization. The standard methods commonly used to create subsurface model do not fully honor the importance of seismic reflectors and detailed structural information in guiding the spatial distribution of rock properties in the presence of complex structures, which can make these methods inaccurate. To overcome initial model accuracy limitations in structurally complex regimes, we have developed a method that uses the seismic image structures to accurately constrain the interpolation of well properties between well locations. A geologically consistent framework provides a more robust initial model that, when inverted with seismic data, delivers a highly detailed yet accurate subsurface model. An application to field data from the North Sea demonstrates the effectiveness of our method, which proves that incorporating the seismic structural framework when interpolating rock properties between wells culminates in the increased accuracy of the final inverted result compared with the standard inversion workflows.

Interpretation of full-azimuth broadband land data from Saudi Arabia and implications for improved inversion, reservoir characterization, and exploration

2013 ◽  
Vol 1 (2) ◽  
pp. T167-T176 ◽  
Author(s):  
Brian P. Wallick ◽  
Luis Giroldi
Keyword(s):  
Saudi Arabia ◽  
Seismic Data ◽  
Acoustic Impedance ◽  
Reservoir Characterization ◽  
Signal To Noise Ratio ◽  
Low Frequency ◽  
Gas Field ◽  
Frequency Model ◽  
Low Frequencies ◽  
Limited Bandwidth

Interpretation of conventional land seismic data over a Permian-age gas field in Eastern Saudi Arabia has proven difficult over time due to low signal-to-noise ratio and limited bandwidth in the seismic volume. In an effort to improve the signal and broaden the bandwidth, newly acquired seismic data over this field have employed point receiver technology, dense wavefield sampling, a full azimuth geometry, and a specially designed sweep with useful frequencies as low as three hertz. The resulting data display enhanced reflection continuity and improved resolution. With the extension of low frequencies and improved interpretability, acoustic impedance inversion results are more robust and allow greater flexibility in reservoir characterization and prediction. In addition, because inversion to acoustic impedance is no longer completely tied to a wells-only low-frequency model, there are positive implications for exploration.

Signal enhancement in seismic data and in the migration process: appliation to 2D seismic exploration data

2020 ◽  
Author(s):  
Maxim I. Protasov ◽  
◽  
Dmitry A. Neklyudov ◽  
Alexandr A. Meretskiy ◽  
◽  
...  
Keyword(s):  
Seismic Data ◽  
Object Oriented ◽  
Seismic Signal ◽  
Signal Enhancement ◽  
Seismic Exploration ◽  
Gaussian Beams ◽  
Reflected Waves ◽  
The North ◽  
First Case ◽  
Useful Signal

The paper presents the results of testing two procedures: signal enhancement by local coherent summation of the seismic data and object–oriented migration along Gaussian beams. Both of these procedures provide extraction and accumulation of a useful seismic signal (primarily reflected waves). In the first case, this process is implemented directly on the seismic data, while in the migration procedure the useful signal is accumulated due to the properties of Gaussian beams. The procedures tested on the 2D real seismic data obtained in the north of the Krasnoyarsk Territory.

Processing Challenges and Solutions for Seismic Reservoir Characterization With Wide-Azimuth OBC Seismic Data, Offshore Abu Dhabi, UAE

2019 ◽  
Author(s):  
Hiroki Miyamoto ◽  
Afra Naser Almheiri ◽  
Keitaro Kojima ◽  
Toshiaki Shibasaki ◽  
Samir Bellah ◽  
...  
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Abu Dhabi ◽  
Seismic Reservoir
Sign in / Sign up

Export Citation Format

Share Document