scholarly journals Accuracy of Planar Anteversion Measurements using Anteroposterior Radiographs

2019 ◽  
Author(s):  
Gwang Chul Lee ◽  
Sang Hong Lee ◽  
Sin Wook Kang ◽  
Hyung Suk Park ◽  
Suenghwan Jo

Abstract Background Several methods using simple anteroposterior (AP) radiographs have been suggested for the measurement of anteversion of the cup component after total hip arthroplasty. Herein, we compared six widely used anteversion measurement methods using two different types of AP radiograph, the conventional pelvis AP and hip-centered AP radiographs, to identify the measurement method and the type of radiograph that would provide the highest accuracy and reliability. Methods We developed two custom-made bi-planar anteversion measurement models for the validation test. The models were designed for pelvis AP and hip-centered AP radiographs, respectively. The radiographs were acquired using the inclination angles of both models, changing from 10° to 70° at 10° increments. For each inclination angle, anteversion was changed from 0° to 30° at 5° increments. The measurements were obtained independently by two orthopedic surgeons blinded from each other’s measurements, using the methods of 1) Pradhan et al., 2) Lewinnek et al., 3) Widmer et al., 4) Liaw et al., 5) Hassan et al., and 6) Ackland et al. The measurements were repeated after 2 months. The accuracy, compared with that of the reference angle, and intra-observer and inter-observer reliabilities of each method were calculated. Results The highest accuracy was found when the method of Liaw et al. was used with hip-centered AP radiographs, which showed a difference of 1.37° ± 1.73 from the reference angle. Moreover, regardless of the type of radiograph, the methods by Pradhan et al., Lewinnek et al., and Liaw et al. showed excellent correlations with the reference anteversion. However, substantial differences were found when the methods by Widmer et al., Hassan et al., and Ackland et al. were used, regardless of the type of radiograph used. We also found no significant difference in anteversions between the measurements made on pelvic and hip-centered AP radiographs. Both interobserver and intraobserver reliabilities were high for all the measurements tested. Conclusions The methods by Pradhan et al., Liaw et al., and Lewinnek et al. may provide relatively accurate anteversion measurements with high reliability, regardless of the type of radiograph.

2019 ◽  
Vol 20 (1) ◽  
Author(s):  
Gwang Chul Lee ◽  
Sang Hong Lee ◽  
Sin Wook Kang ◽  
Hyung Seok Park ◽  
Suenghwan Jo

Abstract Background Several methods using simple anteroposterior (AP) radiographs have been suggested for the measurement of anteversion of the cup component after total hip arthroplasty. Herein, we compared six widely used anteversion measurement methods using two different types of AP radiograph, the conventional pelvis AP and hip-centered AP radiographs, to identify the measurement method and the type of radiograph that would provide the highest accuracy and reliability. Methods We developed two custom-made bi-planar anteversion measurement models for the validation test. The models were designed for pelvis AP and hip-centered AP radiographs, respectively. The radiographs were acquired using the inclination angles of both models, changing from 10° to 70° at 10° increments. For each inclination angle, anteversion was changed from 0° to 30° at 5° increments. The measurements were obtained independently by two orthopedic surgeons blinded from each other’s measurements, using the methods of 1) Pradhan et al., 2) Lewinnek et al., 3) Widmer et al., 4) Liaw et al., 5) Hassan et al., and 6) Ackland et al. The measurements were repeated after 2 months. The accuracy, compared with that of the reference angle, and intra-observer and inter-observer reliabilities of each method were calculated. Results The highest accuracy was found when the method of Liaw et al. was used with hip-centered AP radiographs, which showed a difference of 1.37° ± 1.73 from the reference angle. Moreover, regardless of the type of radiograph, the methods by Pradhan et al., Lewinnek et al., and Liaw et al. showed excellent correlations with the reference anteversion. However, substantial differences were found when the methods by Widmer et al., Hassan et al., and Ackland et al. were used, regardless of the type of radiograph used. When anteversion was measured in an inclination between 30° and 50°, the method of Pradhan et al., when used with pelvis AP radiographs, showed the highest accuracy (1.23° ± 0.92°). We also found no significant difference in anteversions between the measurements made on pelvic and hip-centered AP radiographs. Both interobserver and intraobserver reliabilities were high for all the measurements tested. Conclusions The methods by Pradhan et al., Liaw et al., and Lewinnek et al. may provide relatively accurate anteversion measurements with high reliability, regardless of the type of radiograph.


2019 ◽  
Author(s):  
Gwang Chul Lee ◽  
Sang Hong Lee ◽  
Sin Wook Kang ◽  
Hyung Suk Park ◽  
Suenghwan Jo

Abstract Introduction Several methods have been suggested to measure anteversion of the cup component after total hip arthroplasty using simple anteroposterior (AP) radiographs. Herein, we compared six widely used anteversion measurement methods using two different AP radiographs (conventional pelvis AP vs. hip-centered AP) in order to identify the measurement method and radiograph that provide the highest accuracy and reliability. Methods We developed two custom-made bi-planar anteversion measurement models for the validation. Each model was designed for pelvis AP and hip-centered AP radiographs. The radiographs were acquired with both models’ inclination angle changing from 10° to 70° at 10° increments, and for each inclination angles, anteversion was changed from 0° to 30° at 5° increments. The measurements were obtained independently by two orthopedic surgeons blinded from each other using 6 methods: 1) Pradhan et al., 2) Lewinnek et al., 3) Widmer et al., 4) Liaw et al., 5) Hassan et al., and 6) Ackland et al. The measurements were repeated after 2 months. The accuracy, compared to the reference angle, and intra- and inter-observer reliabilities of each method were calculated. Results The highest accuracy was found when Liaw et al.’s method was used in hip-centered AP radiographs, which showed a difference of 1.37° ± 1.73 from the reference. Moreover, regardless of the type of the radiograph, the methods by Pradhan et al., Lewinnek et al., and Liaw et al. showed excellent correlations with the reference anteversion. However, substantial differences were found when the methods by Widmer et al., Hassan et al., and Ackland et al. were utilized, regardless of the type of radiograph used. When the anteversion was measured in the inclination between 30° and 50°, Pradhan et al.’s method in pelvis AP radiographs showed the highest accuracy (1.23° ± 0.92°). We also found no significant difference when the measured anteversions were compared between pelvis AP and hip-centered AP radiographs. Both inter- and intra-observer reliabilities were high for all measurements tested. Conclusions The methods by Pradhan et al., Liaw et al., and Lewinnek et al. may provide relatively accurate anteversion measurements with high reliability, regardless of the type of radiograph.


2019 ◽  
Author(s):  
Gwang Chul Lee ◽  
Sang Hong Lee ◽  
Sin Wook Kang ◽  
Hyung Suk Park ◽  
Suenghwan Jo

Abstract Introduction Number of methods has been suggested to measure anteversion in the simple AP radiograph and a few studies have validated their accuracy and reliability. In the current study, we compared six widely used anteversion measurement methods using two different radiographs (conventional pelvis AP vs hip centered AP) in order to determine which measurement method and which radiograph provides highest accuracy and reliability. Material and methods We developed custom made two planar anteversion measurement models for the validation. Each models are designed for Pelvis AP and hip AP. The radiographs were taken with the both models’ inclination changing from 10° to 70° at 10° increments and for each inclination angles, anteversion was changed from 0° to 30° at 5° increments. Therefore, the x-ray of the two models were taken in 49 scenarios. The measurements were done independently by two orthopaedic surgeons blinded from each other using 6 methods : 1) Pradhan et al, 2) Lewinak et al, 3) Widmer et al, and 4) Liaw et al. 5) Hassan et al, 6) Ackland et al. Result The highest accuracy was found when Liaw method was used in hip centered AP radiograph which showed difference of 1.37° ± 1.73. Also, regardless of the type of the radiographs, Pradhan, Lewinnek, Liaw all showed relatively high accuracy. However, substantial difference was found when Widmer, Hassan, Ackland method were utilized regardless of the type of radiograph used. When the anteversion were measured in the inclination between 30° and 50°, Pradhan’s method in pelvis AP showed the highest accuracy (1.23° ± 0.92°). Also, we found no significant difference when measured anteversions were compared between Pelvis AP and hip centered AP. Conclusion The study indicates that the Pradhan, Liaw and Lewinnek method may provide the relatively accurate anteversion measurement regardless of the type of the radiographs. Also, it would be unnecessary to take the hip centered AP radiographs in addition to the pelvis AP radiographs for the purpose of measuring anteversion.


2021 ◽  
Vol 12 ◽  
pp. 215145932110633
Author(s):  
Kerem Başarır ◽  
Mahmut Kalem ◽  
Ercan Şahin ◽  
Emre Anıl Özbek ◽  
Mustafa Onur Karaca ◽  
...  

Introduction In this study, our aim was to examine the relationship between the arthroplasty surgeons’ experience level and their aptitude to adjust the cable tension to the value recommended by the manufacturer when asked to provide fixation with cables in artificial bones that underwent extended trochanteric osteotomy (ETO). Materials and Methods A custom-made cable tensioning device with a microvoltmeter was used to measure the tension values in Newtons (N). An ETO was performed on 4 artificial femur bones. Surgeons at various levels of experience attending the IXth National Arthroplasty Congress were asked to fix the osteotomized fragment using 1.7-mm cables and the tensioning device. The participants’ demographic and experience data were investigated and recorded. The surgeons with different level of experience repeated the tensioning test 3 times and the average of these measurements were recorded. Results In 19 (35.2%) of the 54 participants, the force applied to the cable was found to be greater than the 490.33 N (50 kg) value recommended by the manufacturer. No statistically significant difference was determined between the surgeon’s years of experience, the number of cases, and the number of cables used and the tension applied over the recommended maximum value ( P = .475, P = .312, and P = .691, respectively). Conclusions No significant relationship was found between the arthroplasty surgeon’s level of experience and the adjustment of the cable with the correct tension level. For this reason, we believe that the use of tensioning devices with calibrated tension gauges by orthopedic surgeons would help in reducing the number of complications that may occur due to the cable.


2018 ◽  
Vol 2 (1) ◽  
pp. 29-36
Author(s):  
Ali Muhammad ◽  
Zahoor Ul Haq ◽  
Imad Khan

This study uses Pakistan Social and Living Measurement Survey 2016 to study gender discrimination in school enrollment across the four provinces of Pakistan using bi-variate analysis. Results show that there is highly significant difference between male and female education in rural areas (x^2=4940.50 and p<0.05). Analysis indicate that gender disparity in enrollment is significantly higher in low income households (x^2=115.468 and P<0.05). The study also showed that as compared to male, fewer female are enrolled in both public and private sectors. Hence, socio-economic factors play important role in making decision about children enrollment in different types of school. The study recommends that government to take appropriate steps to reduce gender discrimination in school enrollment by offering subsidy on female education in the country.


2018 ◽  
Vol 1 (29) ◽  
pp. 72-81
Author(s):  
Hop Van Nguyen ◽  
Tinh Huu Nguyen ◽  
Hoa Van Tran ◽  
Kinh Van La

The objective of the study is to compare the practical results with the predicted results by Crossbreeding Effects (CBE) software on pig crossbred based on daily gain, backfat thickness and feed conversion ratio. Another purpose of this study is to predict those three traits among some expected hybridization. This research was conducted on pig farm at Binh Thang Research and Development center from 2013 to 2017. In this study, for each pair of purebred Duroc and Pietrain, Duroc and Landrace, Pietrain and Landrace, twelve hybridizations were analyzed, nine unhybridizations were predicted by CBE software. The results showed that there was no significant difference between the predicted and actual data. With some unhybridization crossbred , the predictions showed high reliability (P<0.05). Based on the predicted data of CBE software , some traits of the crossbred animals would not be improved, therefore, it was not necessary to conduct these hybridizations


Total twenty different processed meat plant producing emulsion type sausage were histologically and chemically examined for detection of adulteration with unauthorized tissues. Results revealed that samples were adulterated with different types of animal tissues included; hyaline cartilage, tendon, spongy bone, peripheral nerve trunk, basophilic matrix, lymphatic tissue, fascia, fibrocartilage and vascular tissue. Moreover, these samples were adulterated Also, adulterated with plant tissue included; plant stem, leaves and root. Chemical analysis showed a significant difference in their chemical composition (moisture, fat, protein, ash and calcium) content. Moisture and fat content varied around the permissible limit of E.S.S. while low protein, high ash and calcium content was detected in the examined samples. Therefore, Histological and chemical examinations can be used as reliable methods to detect adultration using unauthorized addition of both animal and plant tissues in processed meat product samples which revealed a high level of falsification.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Nattaphop Noothuan ◽  
Kantamas Apitanyasai ◽  
Somsak Panha ◽  
Anchalee Tassanakajon

Abstract Objective Snails secrete different types of mucus that serve several functions, and are increasingly being exploited for medical and cosmetic applications. In this study, we explored the protein pattern and compared the biological properties of the mucus secreted from the mantle collar and foot of two snail species, Lissachatina fulica and Hemiplecta distincta. Result Protein profile showed a different pattern between the two species and between the two secretory parts. The mantle-specific protein bands were further characterized and among them was an antibacterial protein, achacin. Accordingly, the mucus from the mantle exhibited the higher antibacterial activity than that from the foot in both snail species. The mucus from H. distincta, first reported here, also showed antibacterial properties, but with a lower activity compared to that for L. fulica. Snail mucus also exhibited anti-tyrosinase activity and antioxidant activity but with no significant difference between the foot and mantle mucus. These results indicate some different protein compositions and biological activities of snail slime from the mantle and foot, which might be associated with their specific functions in the animal and are useful for medical applications.


2020 ◽  
pp. 0192513X2094892
Author(s):  
Athira Amira Abd Rauf ◽  
Maizatul Akmar Ismail ◽  
Vimala Balakrishnan ◽  
Loh Sau Cheong ◽  
Novia Indriaty Admodisastro ◽  
...  

The parents of children with dyslexia often experience more parenting stress and depressive symptoms compared to other parents. Studies have shown that supporting and encouraging such parents help in reducing their frustrations, fear, anger, and low self-esteem towards their children. The purpose of this study was to identify and examine the different types of support needed by the parents of children with dyslexia and to explore the relationships between the required support with the parents’ marital status. Fifty questionnaires were distributed to the parents of children with dyslexia and analyzed. The findings showed that the type of support needed for parents of children with dyslexia could be grouped into social, peer-to-peer, financial, and government support. Furthermore, the analysis indicated that there were no significant differences between the social (p = 0.4014), peer-to-peer (p = 0.5020), and government (p = 0.7121) support with parents’ marital status. However, based on one-way ANOVA analysis, there was a significant difference found between the parents’ marital status and financial support (p = 0.0241). Accordingly, it is anticipated that the implication of this research could be used as a guide and a reference for supporting and encouraging parents of children with dyslexia and other learning disabilities.


2006 ◽  
Vol 54 (10) ◽  
pp. 39-45
Author(s):  
A. Vargas ◽  
D. González ◽  
A. Estival ◽  
G. Buitrón

This work presents a comparison of two inocula used for the acclimation of two anaerobic-aerobic sequencing batch bioreactors used for toxic wastewater treatment. The bioreactors were acclimated with different types of sludge: one coming from an anaerobic wastewater treatment plant and the other one from a conventional aerobic activated sludge plant. The model toxic compound was p-nitrophenol, which is reduced to p-aminophenol during the initial anaerobic phase of the reaction, and later mineralized during a posterior aerated reaction phase. Biodegradation of the compounds was monitored using UV/Vis spectrophotometry. After acclimation stabilization of the sludge and of the process was also monitored. Results show that there is no significant difference in acclimation times and stability of the process between the two employed inocula, and thus an originally anaerobic inoculum presents no apparent advantage over a more easily accessible aerobic one.


Sign in / Sign up

Export Citation Format

Share Document