scholarly journals Combustion and Performance Analysis of a Dual-fuel Diesel Engine Using Producer Gas

2021 ◽  
Author(s):  
Pradipta Kumar Dash ◽  
Shakti Prakash Jena ◽  
Harish Chandra Das
Keyword(s):  
Diesel Engine ◽  
Performance Analysis ◽  
Heat Release ◽  
Alternative Energy ◽  
Dual Fuel ◽  
Producer Gas ◽  
Cylinder Pressure ◽  
Gas Temperature ◽  
Suitable Alternative ◽  
And Performance

Abstract The researchers around the globe are trying to overcome energy crisis by developing suitable alternative energy source. In this work, combustion and performance analysis of a diesel engine was studied running in dual-fuel mode using producer gas. The experiment shows lower engine performance like brake thermal efficiency, increased brake specific fuel consumption and exhaust gas temperature in dual-fuel run as compared to diesel alone run. Combustion characteristics like cylinder pressure, mass fraction burned, mean combustion temperature and net heat release were also found to be deteriorated in presence of producer gas. The peak value of cylinder pressure and net heat release were noticed slightly away from the top dead center. The experimentation indicates that combustion improving techniques should be employed to enhance the performance of the dual-fuel engine to run with producer gas.

Combustion Characteristics of Single Cylinder Diesel Engine Fueled with Blends of Thumba Biodiesel as an Alternative Fuel

2019 ◽  
Vol 969 ◽  
pp. 451-460
Author(s):  
Manpreet Singh ◽  
Mohd Yunus Sheikh ◽  
Dharmendra Singh ◽  
P. Nageswara Rao
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Heat Release Rate ◽  
Diesel Fuel ◽  
Release Rate ◽  
Mass Fraction ◽  
Pressure Rise ◽  
Cylinder Pressure ◽  
Gas Temperature ◽  
Edible Vegetable Oil

The rapid rise in energy requirement and problem regarding atmosphere pollutions, renewable biofuels are the better alternative choice for the internal combustion engine to partially or totally replace the pollutant petroleum fuel. In the present work, thumba (Citrullus colocynthis) non-edible vegetable oil is used for the production of biodiesel and examine its possibility as diesel engine fuel. Transesterification process is used to produce biodiesel from thumba non-edible vegetable oil. Thumba biodiesel (TBD) is used to prepare five different volume concentration (blends) with neat diesel (D100), such as TBD5, TBD15, TBD25, TBD35 and TBD45 to run a single cylinder diesel engine. The diesel engine's combustion parameter such as in-cylinder pressure, rate of pressure rise, net heat release rate, cumulative heat release, mean gas temperature, and mass fraction burnt analyzed through graphs and compared all thumba biodiesel blends result with neat diesel fuel. The mass fraction burnt start earlier for thumba biodiesel blends compared to diesel fuel because of less ignition delay while peak in-cylinder pressure, maximum rate of pressure rise, maximum net heat release rate, maximum cumulative heat release, and maximum mean gas temperature has found decreased results up to 1.93%, 5.53%, 4.11%, 4.65%, and 1.73% respectively for thumba biodiesel.

scholarly journals THE RESEARCH OF SIMPLIFICATION OF 1.9 TDI DIESEL ENGINE HEAT RELEASE PARAMETERS DETERMINATION / 1,9 TDI DYZELINIO VARIKLIO ŠILUMOS IŠSISKYRIMO PARAMETRŲ NUSTATYMO SUPAPRASTINIMO TYRIMAS

2014 ◽  
Vol 6 (5) ◽  
pp. 570-576
Author(s):  
Justas Žaglinskis ◽  
Kristóf Lukács ◽  
Ákos Bereczky ◽  
Paulius Rapalis
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Exhaust Gas ◽  
Cylinder Pressure ◽  
Gas Temperature ◽  
Study Results ◽  
Release Data ◽  
Exhaust Gas Temperature ◽  
Main Engine

The investigation of modified methodology of Audi 1.9 TDI 1Z diesel engine heat release parameters’ determination is represented in the article. In this research the AVL BOOST BURN and IMPULS software was used to treat data and to simulate engine work process. The reverse task of indicated pressure determination from heat release data was solved here. T. Bulaty and W. Glanzman methodology was modified for purpose to simplify the determination of heat release parameters. The maximal cylinder pressure, which requires additional expensive equipment, was changed into the objective indicator – exhaust gas temperature. This modification allowed to simplify the experimental engine tests and also gave simulation results in an error range up to 2% of main engine operating parameters. The study results are assessed as an important point for the simplification of engine test under field conditions. Straipsnyje pateikta dyzelinio Audi variklio 1,9 TDI 1Z šilumos išsiskyrimo parametrų nustatymo metodikos ir jos modifikavimo tyrimas. Šio tyrimo procese atilikto eksperimento duomenims apdoroti ir darbo procesui modeliuoti panaudoti AVL BOOST BURN ir IMPULS programiniai paketai. Tyrime buvo sprendžiamas atvirkščias indikatorinio slėgio nustatymo iš šilumos charakteristikos duomenų uždavinys. Siekiant supaprastinti šilumos išsiskyrimo parametrų nustatymą, panaudota modifikuota T. Bulaty ir W. Glanzman metodika. Maksimalaus slėgio cilindre parametras, kurio nustatymas reikalauja papildomos brangios įrangos, buvo pakeistas objektyviu išmetamųjų dujų temperatūros parametru. Šis modifikavimas leidžia supaprastinti eksperimentinius tyrimus bei leido atlikti pagrindinių variklio darbo parametrų modeliavimą neviršijant 2 % paklaidų ribos. Tyrimo rezultatas vertinamas itin svarbiu variklių bandymų lauko sąlygomis supaprastinimo atžvilgiu.

scholarly journals Effect of Producer Gas from Redgram Stalk and Combustion Chamber Types on the Emission and Performance Characteristics of Diesel Engine

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5879
Author(s):  
K. M. Akkoli ◽  
N. R. Banapurmath ◽  
Suresh G ◽  
Manzoore Elahi M. Soudagar ◽  
T. M. Yunus Khan ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Engine Performance ◽  
Nozzle Geometry ◽  
Producer Gas ◽  
Gas Temperature ◽  
Combustion Chambers ◽  
And Performance ◽  
Exhaust Gas Temperature ◽  
Emission And Performance

The engine performance has been improved by modifying the combustion chamber shape of the diesel engine for dual-fuel operation with liquid fuel and producer gas (PG). The combined effect of gaseous fuel from redgram stalk and combustion chamber type on the emission and performance of blended-fuel of diesel and HOME biodiesel–PG has been investigated. In this experimental study, four varieties of combustion chambers hemispherical (HCC), low swirl (LSCC), dual swirl (DSCC), and toroidal re-entrant (TRCC) were analyzed comprehensively. The results presented that the TRCC configuration with a given nozzle geometry has 9% improved brake thermal efficiency (BTE) and 10.4% lower exhaust gas temperature (EGT). The smoke, unburnt hydrocarbon (UBHC), and carbon monoxide (CO) decreased by 10–40%, but a 9% increase in nitrogen oxides (NOX) emission levels was observed with TRCC. The delay period and combustion period were decreased by 5% and 7%. The fuel replacement of about 71% for the diesel–PG combination with HCC and 68% for the HOME–PG combination with TRCC was achieved.

scholarly journals Combustion and Performance Evaluation of a Spark Ignition Engine Operating with Acetone–Butanol–Ethanol and Hydroxy

2021 ◽  
Vol 11 (11) ◽  
pp. 5282
Author(s):  
Wilson Guillin-Estrada ◽  
Daniel Maestre-Cambronel ◽  
Antonio Bula-Silvera ◽  
Arturo Gonzalez-Quiroga ◽  
Jorge Duarte-Forero
Keyword(s):  
Heat Release ◽  
Fuel Consumption ◽  
Release Rate ◽  
Combustion Temperature ◽  
Spark Ignition ◽  
Dual Fuel ◽  
Cylinder Pressure ◽  
Fuel Blends ◽  
And Performance ◽  
Acetone Butanol Ethanol

Alternative fuels for internal combustion engines (ICE) emerge as a promising solution for a more sustainable operation. This work assesses combustion and performance of the dual-fuel operation in the spark ignition (SI) engine that simultaneously integrates acetone–butanol–ethanol (ABE) and hydroxy (HHO) doping. The study evaluates four fuel blends that combine ABE 5, ABE 10, and an HHO volumetric flow rate of 0.4 LPM. The standalone gasoline operation served as the baseline for comparison. We constructed an experimental test bench to assess operation conditions, fuel mode, and emissions characteristics of a 3.5 kW-YAMAHA engine coupled to an alkaline electrolyzer. The study proposes thermodynamic and combustion models to evaluate the performance of the dual-fuel operation based on in-cylinder pressure, heat release rate, combustion temperature, fuel properties, energy distribution, and emissions levels. Results indicate that ABE in the fuel blends reduces in-cylinder pressure by 10–15% compared to the baseline fuel. In contrast, HHO boosted in-cylinder pressure up to 20%. The heat release rate and combustion temperature follow the same trend, corroborating that oxygen enrichment enhances gasoline combustion. The standalone ABE operation raises fuel consumption by around 10–25 g∙kWh−1 compared to gasoline depending on the load, whereas HHO decreases fuel consumption by around 25%. The dual-fuel operation shows potential for mitigating CO, HC, and smoke emissions, although NOx emissions increased. The implementation of dual-fuel operation in SI engines represents a valuable tool for controlling emissions and reducing fuel consumption while maintaining combustion performance and thermal efficiency.

A phenomenological combustion analysis of a dual-fuel natural-gas diesel engine

2016 ◽  
Vol 231 (1) ◽  
pp. 66-83 ◽  
Author(s):  
Shuonan Xu ◽  
David Anderson ◽  
Mark Hoffman ◽  
Robert Prucka ◽  
Zoran Filipi
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
Heat Release ◽  
Diesel Fuel ◽  
Fuel Injection ◽  
Dual Fuel ◽  
Injection Timing ◽  
Heavy Duty ◽  
Engine System ◽  
Wiebe Function

Energy security concerns and an abundant supply of natural gas in the USA provide the impetus for engine designers to consider alternative gaseous fuels in the existing engines. The dual-fuel natural-gas diesel engine concept is attractive because of the minimal design changes, the ability to preserve a high compression ratio of the baseline diesel, and the lack of range anxiety. However, the increased complexity of a dual-fuel engine poses challenges, including the knock limit at a high load, the combustion instability at a low load, and the transient response of an engine with directly injected diesel fuel and port fuel injection of compressed natural gas upstream of the intake manifold. Predictive simulations of the complete engine system are an invaluable tool for investigations of these conditions and development of dual-fuel control strategies. This paper presents the development of a phenomenological combustion model of a heavy-duty dual-fuel engine, aided by insights from experimental data. Heat release analysis is carried out first, using the cylinder pressure data acquired with both diesel-only and dual-fuel (diesel and natural gas) combustion over a wide operating range. A diesel injection timing correlation based on the injector solenoid valve pulse widths is developed, enabling the diesel fuel start of injection to be detected without extra sensors on the fuel injection cam. The experimental heat release trends are obtained with a hybrid triple-Wiebe function for both diesel-only operation and dual-fuel operation. The ignition delay period of dual-fuel operation is examined and estimated with a predictive correlation using the concept of a pseudo-diesel equivalence ratio. A four-stage combustion mechanism is discussed, and it is shown that a triple-Wiebe function has the ability to represent all stages of dual-fuel combustion. This creates a critical building block for modeling a heavy-duty dual-fuel turbocharged engine system.

A Spray-Droplet Model for Diesel Combustion

1969 ◽  
Vol 184 (10) ◽  
pp. 28-35 ◽  
Author(s):  
J. Shipinski ◽  
P. S. Myers ◽  
O. A. Uyehara
Keyword(s):  
Experimental Data ◽  
Diesel Engine ◽  
Heat Release ◽  
Engine Speed ◽  
Chamber Pressure ◽  
Gas Temperature ◽  
Single Droplet ◽  
Burning Rates ◽  
Burning Model ◽  
The One

A spray-burning model (based on single-droplet theory) for heat release in a diesel engine is presented. Comparison of computations using this model and experimental data from an operating diesel engine indicate that heat release rates are not adequately represented by single-droplet burning rates. A new concept is proposed, i.e. a burning coefficient for a fuel spray. Comparisons between computations and experimental data indicate that the numerical value of this coefficient is nearly independent of engine speed and combustion-chamber pressure. However, the instantaneous value of the spray burning coefficient is approximately proportional to the instantaneous mass-averaged cylinder gas temperature to the one-third power.

Combustion and Emission Characteristics of Dual Fuel Engine for Different Parameters

2021 ◽  
Vol 13 (4) ◽  
Author(s):  
Jianjun Zhu ◽  
Peng Li ◽  
Yufeng Xie ◽  
Xin Geng
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Heat Release Rate ◽  
Compression Ratio ◽  
Release Rate ◽  
Emission Characteristics ◽  
Soot Emission ◽  
Cylinder Pressure ◽  
Fuel Delivery ◽  
Soot Emissions

The effects of compression ratio and fuel delivery advance angle on the combustion and emission characteristics of premixed methanol charge induced ignition by Fischer Tropsch diesel engine were investigated using a CY25TQ diesel engine. In the process of reducing the compression ratio from 16.9 to 15.4, the starting point of combustion is fluctuating, the peak of in-cylinder pressure and the maximum pressure increase rate decrease by 44.5% and 37.7% respectively. The peak instantaneous heat release rate increases by 54.4%. HC and CO emissions are on a rising trend. NOx and soot emissions were greatly decreased. The soot emission has the biggest drop of 50%. Reducing the fuel delivery advance angle will make the peak of in-cylinder pressure and the peak of pressure rise rate increase while the peak of heat release rate decreases. The soot emission is negatively correlated with the fuel delivery advance angle. When the fuel delivery advance angle is 16° CA, the soot emissions increased the most by 130%.

Sign in / Sign up

Export Citation Format

Share Document