scholarly journals Black Widow Optimization Algorithm and Similarity Index Based Adaptive Scheduled Partitioning Technique for Reliable Emergency Message Broadcasting in VANET

Author(s):  
M Ramya Devi ◽  
I Jasmine Selvakumari Jeya

Abstract The vehicular ad hoc network (VANET) topology will change the mobility of the nodes and the data delivery will be efficient in the vehicle environment. This technique uses the density, mobility, dissemination in the requirements of emergency message broadcasting. The emergency message is broadcast on the road causes many issues like reliability, latency and scalability. Beacons are used in the VANET to broadcast messages and get the information from neighbours. When more vehicles transmit the messages in equal time lead a frequent broadcast storm the vehicles are faced the message delivery failure. Adaptive Scheduled Partitioning and Broadcasting technique (ASPBT) is used in our paper for message reliability, and the transmission efficiency will adjust the partitions and beacon automatically for reducing retransmissions. The partition size is determined using the density of network transmission of each partition schedule is estimated using the Black Widow Optimization (BWOA). The emergency message gets low delay and redundancy of the message is reducing, ASPBT include the forwarding of novel with the selection of optimal partition. The performance analysis is done with the existing methods for the determination of efficiency, redundancy, collision, and delay. The efficiency of proposed technique as 98% comparing with existing broadcast schemes of VANET.

Vehicular Ad Hoc Network (VANET) communication promises a vast array of applications ranging from road safety and driving comfort. Safety message broadcasting plays a significant role in highway safety in which the safety alert messages have to be delivered immediately to the vehicles located in the risk boundary area. Most of the current research attempt to select optimal relayer for safety message rebroadcasting. However, relayer selection models are not efficient, especially in a high-density VANET, as they cause a high delay in safety message delivery and lead to multiple accidents at the incident spot. To avert these issues, this work proposes a QoS Routing Protocol (QoRP) that aims to enhance the road safety in both sparse and dense VANETs.


Author(s):  
Amolkirat Singh ◽  
Guneet Saini

Many people lose their life and/or are injured due to accidents or unexpected events taking place on road networks. Besides traffic jams, these accidents generate a tremendous waste of time and fuel. Undoubtedly, if the vehicles are provided with timely and dynamic information related to road traffic conditions, any unexpected events or accidents, the safety and efficiency of the transportation system with respect to time, distance, fuel consumption and environmentally destructive emissions can be improved. In the field of computer and information science, Vehicular Ad hoc Network (VANET) have recently emerged as an effective tool for improving road safety through propagation of warning messages among the vehicles in the network about potential obstacles on the road ahead. VANET is a research area which is in more demand among the researchers, the automobile industries and scientists to discover about the loopholes and advantages of the vehicular networks so that efficient routing algorithms can be developed which can provide reliable and secure communication among the mobile nodes.In this paper, we propose a Groundwork Based Ad hoc On Demand Distance Vector Routing Protocol (GAODV) focus on how the Road Side Units (RSU’s) utilized in the architecture plays an important role for making the communication reliable. In the interval of finding the suitable path from source to destination the packet loss may occur and the delay also is counted if the required packet does not reach the specified destination on time. So to overcome delay, packet loss and to increase throughput GAODV approach is followed. The performance parameters in the GAODV comes out to be much better than computed in the traditional approach.


Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 3622 ◽  
Author(s):  
Jin-Woo Kim ◽  
Jae-Wan Kim ◽  
Dong-Keun Jeon

Vehicular ad hoc networks (VANETs) provide information and entertainment to drivers for safe and enjoyable driving. Wireless Access in Vehicular Environments (WAVE) is designed for VANETs to provide services efficiently. In particular, infotainment services are crucial to leverage market penetration and deployment costs of the WAVE standard. However, a low presence of infrastructure results in a shadow zone on the road and a link disconnection. The link disconnection is an obstacle to providing safety and infotainment services and becomes an obstacle to the deployment of the WAVE standard. In this paper, we propose a cooperative communication protocol to reduce performance degradation due to frequent link disconnection in the road environment. The proposed protocol provides contention-free data delivery by the coordination of roadside units (RSUs) and can provide the network QoS. The proposed protocol is shown to enhance throughput and delay through the simulation.


Electronics ◽  
2021 ◽  
Vol 10 (22) ◽  
pp. 2772
Author(s):  
Gleb Dubosarskii ◽  
Serguei Primak

Anti-jamming games have become a popular research topic. However, there are not many publications devoted to such games in the case of vehicular ad hoc networks (VANETs). We considered a VANET anti-jamming game on the road using a realistic driving model. Further, we assumed the quadratic power function in both vehicle and jammer utility functions instead of the standard linear term. This makes the game model more realistic. Using mathematical methods, we expressed the Nash equilibrium through the system parameters in single-channel and multi-channel cases. Since the network parameters are usually unknown, we also compared the performance of several reinforcement learning algorithms that iteratively converge to the Nash equilibrium predicted analytically without having any information about the environment in the static and dynamic scenarios.


Author(s):  
Ahmed Y. Awad ◽  
Seshadri Mohan

This article applies machine learning to detect whether a driver is drowsy and alert the driver. The drowsiness of a driver can lead to accidents resulting in severe physical injuries, including deaths, and significant economic losses. Driver fatigue resulting from sleep deprivation causes major accidents on today's roads. In 2010, nearly 24 million vehicles were involved in traffic accidents in the U.S., which resulted in more than 33,000 deaths and over 3.9 million injuries, according to the U.S. NHTSA. A significant percentage of traffic accidents can be attributed to drowsy driving. It is therefore imperative that an efficient technique is designed and implemented to detect drowsiness as soon as the driver feels drowsy and to alert and wake up the driver and thereby preventing accidents. The authors apply machine learning to detect eye closures along with yawning of a driver to optimize the system. This paper also implements DSRC to connect vehicles and create an ad hoc vehicular network on the road. When the system detects that a driver is drowsy, drivers of other nearby vehicles are alerted.


Author(s):  
Mekelleche Fatiha ◽  
Haffaf Hafid

Vehicular Ad-Hoc Networks (VANETs), a new mobile ad-hoc network technology (MANET), are currently receiving increased attention from manufacturers and researchers. They consist of several mobile vehicles (intelligent vehicles) that can communicate with each other (inter-vehicle communication) or with fixed road equipment (vehicle-infrastructure communication) adopting new wireless communication technologies. The objective of these networks is to improve road safety by warning motorists of any event on the road (accidents, hazards, possible deviations, etc.), and make the time spent on the road more pleasant and less boring (applications deployed to ensure the comfort of the passengers). Practically, VANETs are designed to support the development of Intelligent Transportation Systems (ITS). The latter are seen as one of the technical solutions to transport challenges. This chapter, given the importance of road safety in the majority of developed countries, presents a comprehensive study on the VANET networks, highlighting their main features.


Author(s):  
Akram A. Almohammedi ◽  
Nor K. Noordin ◽  
A. Sali ◽  
Fazirulhisyam Hashim ◽  
Waheb A. Jabbar ◽  
...  

Vehicular Ad Hoc Networks (VANETs) have been developed to improve the safety, comfort and efficiency of driving on the road. The IEEE 1609.4 is a standard intended to support multi-channel in VANETs. These channels include one control channel for safety applications and six service channels for service applications. However, there is still no comprehensive analysis for the average delay and system throughput of IEEE 1609.4 MAC in VANETs considering error-prone channel under non-saturated conditions. In this paper, we propose an analytical models based on 1-D and 2-D Markov chain to evaluate the performance analysis of IEEE 1609.4 MAC in the presence of error-prone channels. Besides, freezing of the back-off timer is taken into consideration to provide an accurate estimation of access to the channel. The simulation results have been carried out to validate the analytical results of our model. The results show that the performance of our model outperforms the existing model in terms of packet delivery ratio and average delay of safety packets over CCH, and system throughput of service packets over SCHs.


2019 ◽  
Vol 8 (2) ◽  
pp. 2401-2405

Accident prevention has always been an important issue for governments and car manufacturers across the world. Roughly 1.5 million people are killed in road accidents annually in India. The primary causes of accidents are broken and weathered roads, hazardous weather conditions, as well as human errors such as over speeding, distracted driving, and not following road safety rules. The traffic police work hard to enforce strict rules and maintain accident-free roads, but this hasn’t proven to be efficient. A vehicular ad hoc network (VANET), as the name says, is a network consisting of nodes. These nodes depict vehicles on the road. This project aims to use this technology with K-Nearest Neighbour Classifier (KNN) to create a prototype of a system which can notify drivers of an impending accident caused by forward collisions, rear collision etc., thus enabling them to take immediate action and prevent it.


The number of vehicles on the road are increasing rapidly day by day, which leads to massive road congestions and traffic deadlocks. This paper proposes a model for an algorithm-based technique for efficient resolution of road traffic deadlocks, which would work on the technologies related to the Internet of Vehicles (IoV), while keeping the safe and efficient movement of vehicles along with the maintenance of constant communication with nearby vehicles and roadside infrastructure using Vehicular Ad-hoc Networks (VANETs). This would ultimately aid towards the optimization of road traffic, which is very much a need of the hour considering the ever-increasing amount of traffic on the roads today. We make use of two important phases, namely, Deadlock Detection Phase and Deadlock Resolution Phase in order to resolve traffic deadlocks. An equally important focus has been put towards a deep understanding of the motivation behind the efforts put in this paper by examining the present scenario of road traffic conditions and their resulting complications, and how the proposed model could potentially help resolve such complications. It also involves a brief discussion on VANETs, which provides an efficient means of connecting the vehicles together in a network for seamless communications


Sign in / Sign up

Export Citation Format

Share Document