scholarly journals Evaluation of Physical Properties of Mycelium-Based Bio Composites for Use As Facade Insulation Material

2021 ◽  
Author(s):  
Frank Dehn ◽  
Engin Kotan
Keyword(s):  
Physical Properties ◽  
Thermal Insulation ◽  
Beech Wood ◽  
Fungal Mycelium ◽  
Insulation Material ◽  
Test Results ◽  
Construction Sector ◽  
Rice Husks ◽  
Insulation Materials ◽  
Base Substrate

Abstract Background: To evaluate the usability of mycelium-based materials for construction, first tests were carried out to determine their suitability for thermal insulation. Different substrate compositions were tested for various physical properties. The compositions and experimental setups used are described in the “Methods” section. Results: Materials based on fungal mycelium were found to have promising properties for use in the construction sector. Their thermal conductivities are comparable to those of commercially available ecological insulation materials. As material properties turned out to be dependent on the substrate used for the production of mycelium materials, further optimisation is required. Conclusion: For first preliminary tests [1] to study the performance of mycelium-based materials, different additives (beech wood, rice husks, coffee silver skin, perlite rock) were added to a base substrate to determine their influence on physical properties. Compared to the characteristics of conventional thermal insulation materials, the test results obtained are rather promising and confirm suitability of mycelium-based materials for building. However, further systematic studies are needed to investigate options to improve major properties and to ensure reproducibility of mycelium materials with largely homogeneous properties.

scholarly journals Fungal Based Biopolymer Composites for Construction Materials

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2906
Author(s):  
Iuliana Răut ◽  
Mariana Călin ◽  
Zina Vuluga ◽  
Florin Oancea ◽  
Jenica Paceagiu ◽  
...  
Keyword(s):  
Thermal Insulation ◽  
Renewable Resources ◽  
Heat Exposure ◽  
Construction Materials ◽  
Bacterial Spores ◽  
Fungal Mycelium ◽  
Insulation Material ◽  
Construction Sector ◽  
Low Costs ◽  
Microscopy Images

Environmental contamination, extensive exploitation of fuel sources and accessibility of natural renewable resources represent the premises for the development of composite biomaterials. These materials have controlled properties, being obtained through processes operated in mild conditions with low costs, and contributing to the valorization of byproducts from agriculture and industry fields. A novel board composite including lignocelullosic substrate as wheat straws, fungal mycelium and polypropylene embedded with bacterial spores was developed and investigated in the present study. The bacterial spores embedded in polymer were found to be viable even after heat exposure, helping to increase the compatibility of polymer with hydrophilic microorganisms. Fungal based biopolymer composite was obtained after cultivation of Ganoderma lucidum macromycetes on a mixture including wheat straws and polypropylene embedded with spores from Bacillus amyloliquefaciens. Scanning electron microscopy (SEM) and light microscopy images showed the fungal mycelium covering the substrates with a dense network of filaments. The resulted biomaterial is safe, inert, renewable, natural, biodegradable and it can be molded in the desired shape. The fungal biocomposite presented similar compressive strength and improved thermal insulation capacity compared to polystyrene with high potential to be used as thermal insulation material for applications in construction sector.

scholarly journals Factors for Eco-Efficiency Improvement of Thermal Insulation Materials

2016 ◽  
Vol 678 ◽  
pp. 1-13 ◽  
Author(s):  
Jun Kono ◽  
Yutaka Goto ◽  
York Ostermeyer ◽  
Rolf Frischknecht ◽  
Holger Wallbaum
Keyword(s):  
Life Cycle ◽  
Physical Properties ◽  
Production Process ◽  
Environmental Impacts ◽  
Thermal Insulation ◽  
Foam Glass ◽  
Insulation Material ◽  
Contributing Factors ◽  
Insulation Materials ◽  
Thermo Physical Properties

Thermal insulation material is an important component to reduce the environmental impact of buildings through the reduction of energy consumption in the operation phase. However, the material itself has embodied environmental impacts for the value it provides. Eco-efficiency is a method that quantifies relation between the environmental performance and the created value of a product system. This study investigated contributing factors of the eco-efficiency of thermal insulation materials to support decision making of material manufacturers. For the improvement of eco-efficiency, the assessment was made in two scopes: investigating the contributing factors of impact caused at production processes; and thermal performance through thermo-physical properties. For quantifying environmental impacts, cradle-to-grave life cycle assessment (LCA) of each materials were made. The life cycle impact assessment (LCIA) indicators used were ReCiPe H/A and global warming potential (GWP100a). For the assessment of production process, the inventories of the materials were assigned to six categories: heat, chemicals, electricity, transportation, raw materials and wastes. Among the assessed materials, contribution of electricity and heat within the production process was large for foam glass which had the highest potential to improve the eco-efficiency which was by factor 1.72. The analysis on relation between thermo-physical properties and eco-efficiency based on product data of the materials highlighted the importance of density as an indicator upon development and use. Althoughdensity often gains less attention,the finding suggested the effectiveness of improving the efficiency by having lower density without compensating the performance of the materials.

scholarly journals A Compressive Peak Strength Model for CFRP-Confined Thermal Insulation Materials under Elevated Temperature

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 26 ◽  
Author(s):  
Yeou-Fong Li ◽  
Wai-Keong Sio ◽  
Ying-Kuan Tsai
Keyword(s):  
Compressive Strength ◽  
Elevated Temperature ◽  
Thermal Insulation ◽  
Thermal Softening ◽  
Peak Strength ◽  
Insulation Material ◽  
Strength Model ◽  
Test Results ◽  
Thermal Insulation Material ◽  
Insulation Materials

In this paper, a compressive peak strength model for CFRP-confined thermal insulation materials under elevated temperature was proposed. The thermal insulation material was made by Portland cement with different portions of perlite. The compressive strengths of four different perlite ratios in weight, such as 0%, 10%, 20%, and 30% of thermal insulation materials, confined by one-layer, two-layer, and three-layer carbon fiber-reinforced polymer (CFRP) composite materials, were obtained. The test results indicated that the specimen’s compressive strength decreased with an increase in the amount of perlite replacement and increased with an increase in the number of CFRP wrapping layers. Based on the test results, a theoretical compressive peak strength model with some parameters was proposed. In the meantime, the compressive strengths of the above four different perlite ratios of thermal insulation materials under elevated temperature, such as ambient temperature, 100 °C, 150 °C, 200 °C, 250 °C, and 300 °C, were obtained. For compression tests of specimens with a fixed amount of perlite, the test results indicated that the specimen’s compressive strength decreased with an increase in temperature, highlighting a thermal softening phenomenon. Based on the test results, a compressive peak strength model with a thermal softening parameter was proposed to predict the peak strength under elevated temperature. Finally, a compressive peak strength model for thermal insulation material with CFRP confinement under different elevated temperature was derived, and it achieved acceptable results in comparison to the experimental results.

Preparation and Properties of Phase Change Thermal Insulation Materials

2018 ◽  
Vol 281 ◽  
pp. 131-136
Author(s):  
Shi Chao Zhang ◽  
Wei Wu ◽  
Yu Feng Chen ◽  
Liu Shi Tao ◽  
Kai Fang ◽  
...  
Keyword(s):  
Phase Change ◽  
Thermal Insulation ◽  
Calcium Silicate ◽  
Phase Change Materials ◽  
Performance Test ◽  
Thermal Protection ◽  
Insulation Material ◽  
Insulation Materials ◽  
Short Time ◽  
Change Material

With the increase of the speed of vehicle, the thermal protection system of its powerplant requires higher insulation materials. Phase change materials can absorb large amounts of heat in short time. So the introduction of phase change materials in thermal insulation materials can achieve efficient insulation in a limited space for a short time. In this paper, a new phase change thermal insulation material was prepared by pressure molding with microporous calcium silicate as matrix and Li2CO3 as phase change material. The morphology stability, exudation and heat insulation of the materials were tested. The results show that the porous structure of microporous calcium silicate has a good encapsulation when the phase transition of Li2CO3 is changed into liquid. And the material has no leakage during use. The thermal performance test also shows that the insulation performance of the material has obvious advantages in the short term application.

Fire Risk Assessment of Fire Retardant Polyurethane Thermal Insulation Materials for Exterior Walls of Buildings Based on Analytical Hierarchy Process

2013 ◽  
Vol 785-786 ◽  
pp. 191-198
Author(s):  
Li Jun Li ◽  
Feng Li ◽  
Ze Jiang Zhang
Keyword(s):  
Thermal Insulation ◽  
Evaluation Method ◽  
Fire Hazard ◽  
Fire Retardant ◽  
Fire Risk ◽  
Insulation Material ◽  
Test Results ◽  
Analytic Hierarchy ◽  
Rigid Foam ◽  
Hierarchy Process

Different flame retardant contents of polyurethane rigid foam (PRF) were prepared in this paper. Combustion performances of PRF were tested by cone calorimeter (CONE). Fire risk of PRF was evaluated based on Analytic Hierarchy Process (AHP). The evaluation results were compared with the traditional LOI results. It was found that the evaluation method based on AHP combined with CONE test results for evaluating fire hazard of thermal insulation material for exterior walls of buildings is more accurate and objective compared with the method of the traditional LOI.

Effects of boric acid addition and sintering temperature on the thermal conductivity of perlitebased insulation materials

2020 ◽  
Vol 62 (4) ◽  
pp. 408-412
Author(s):  
Yuksel Palaci
Keyword(s):  
Thermal Conductivity ◽  
Physical Properties ◽  
Boric Acid ◽  
Thermal Insulation ◽  
Sintering Temperature ◽  
Direct Relation ◽  
Insulation Materials ◽  
Acid Addition ◽  
Composition Characteristics

Abstract In this study, the variation of thermal conductivity and density of 15 wt.-% boric acid - 85 wt.-% sepiolite, 30 wt.-% boric acid - 30 wt.-% sepiolite - 40 wt.-% perlite, 30 wt.-% boric acid - 30 wt.-% cordierite - 40 wt.-% perlite and 30 wt.-% boric acid - 30 wt.-% alumina - 40 wt.-% perlite compositions at 700 °C and 900 °C sintering temperatures were investigated. The results show that increasing the amount of boric acid and decreasing the sintering temperature lead to an improvement in thermal insulation properties. There is a direct relation between the thermal conductivity and density of the specimens. Both physical properties change with a change in the sintering temperature and the composition characteristics. Minimum thermal conductivity has been observed in a specimen consisting of 30 wt.-% boric acid - 30 wt.-% alumina - 40 wt.-% perlite.

scholarly journals Impact resistance of external thermal insulation systems

2018 ◽  
Vol 163 ◽  
pp. 08004 ◽  
Author(s):  
Ewa Sudoł ◽  
Dawid Dębski ◽  
Renata Zamorowska ◽  
Barbara Francke
Keyword(s):  
Thermal Insulation ◽  
Impact Resistance ◽  
Experimental Program ◽  
Insulation Material ◽  
Test Results ◽  
Composite Systems ◽  
Factors Influencing ◽  
Insulation Systems ◽  
The Impact ◽  
Fibre Mesh

In the paper the results of an experimental program intended to determine factors influencing the impact resistance of the External Thermal Insulation Composite Systems (ETICS) were presented. For the research the systems based on polystyrene have been chosen. The insulation material was faced with a rendering consisting of base coat reinforced with standard or armored glass fibre mesh and silicone or silicone-silicate binders as finishing coats. The influence of various renderings components was evaluated with respect to resistance to hard body impact and resistance to hail. The test results were discussed in the context of the possible impact level on ETICS in use.

Effect of Operating Temperatures on Thermal Conductivity of Polystyrene Insulation Material: Impact on Envelope-Induced Cooling Load

2014 ◽  
Vol 564 ◽  
pp. 315-320 ◽  
Author(s):  
Maatouk Khoukhi ◽  
Mahmoud Tahat
Keyword(s):  
Thermal Conductivity ◽  
Thermal Insulation ◽  
Energy Performance ◽  
Building Envelope ◽  
Insulation Material ◽  
Cooling Load ◽  
Thermal Insulation Material ◽  
Insulation Materials ◽  
Energy Performance Of Buildings ◽  
The Impact

The impact of the thermal conductivity (k-value) change of polystyrene insulation material in building envelope due to changes in temperature on the thermal and energy performance of a typical residential building under hot climate is investigated. Indeed, the thermal and energy performance of buildings depends on the thermal characteristics of the building envelope, and particularly on the thermal resistance of the insulation material used. The thermal insulation material which is determined by its thermal conductivity, which describes the ability of heat to flow cross the material in presence of a gradient of temperature, is the main key to assess the performance of the thermal insulation material. When performing the energy analysis or calculating the cooling load for buildings, we use published values of thermal conductivity of insulation materials, which are normally evaluated at 24°C according to the ASTM standards. In reality, thermal insulation in building is exposed to significant and continuous temperature variations, due essentially to the change of outdoor air temperature and solar radiation. Many types of insulation materials are produced and used in Oman, but not enough information is available to evaluate their performance under the prevailing climatic condition. The main objective of this study is to investigate the relationship between the temperature and thermal conductivity of various densities of polystyrene, which is widely used as building insulation material in Oman. Moreover, the impact of thermal conductivity variation with temperature on the envelope-induced cooling load for a simple building model is discussed. This work will serve as a platform to investigate the effect of the operating temperature on thermal conductivity of other building material insulations, and leads to more accurate assessment of the thermal and energy performance of buildings in Oman.

scholarly journals PRODUCTION OF THERMAL INSULATION MATERIAL BASED ON VOLCANIC ASH DEPOSITS OF PRIMAGADANYA

2019 ◽  
Vol 10 (2) ◽  
pp. 78-91
Author(s):  
A. V Bolotin ◽  
S. M Sergeev ◽  
A. A Lunegova ◽  
E. A Kochetkova
Keyword(s):  
Thermal Insulation ◽  
Building Materials ◽  
Volcanic Ash ◽  
Mineral Wool ◽  
Raw Material ◽  
Thermal Calculation ◽  
Vapor Permeability ◽  
Insulation Material ◽  
Comparative Performance ◽  
Insulation Materials

Modern technologies are not standing still, and scientists are trying not only to invent new building materials, but also to find non-standard use of various raw materials that were previously considered unsuitable for use. Innovative technologies are actively used for modern construction of buildings, in particular, some types of new materials are used in the construction of various facilities. This is especially true in areas where it is not possible to import or use ordinary building materials for various reasons. Often, when designing a building, developers are wondering whether it is worth making the house warm during construction, and which insulation for the walls of the house is better to choose. This article addresses the question of which insulation for walls is most suitable for construction. The most common are mineral insulation, which are represented on the market today in the form of basalt slabs, fiberglass, etc. They have such advantages as low thermal conductivity, good thermal insulation and vapor permeability. The article presents a table with comparative performance characteristics of a mineral wool stone slab and a fiberglass slab. Stone or basalt wool has several advantages. It is able to withstand significant temperatures and temperature changes, the mats are easy to transport, convenient to install. In our opinion, a serious alternative to basalt in the production of thermal insulation materials is volcanic ash. One of the main features of volcanic ash are its building qualities, such as good thermal insulation and an environmentally friendly composition. Since here we are considering the possibility of producing insulation materials based on volcanic ash, we performed a thermal calculation of the enclosing structures. Also in the tables are the costs of transportation of volcanic ash from the field to the point of the proposed production of insulating material. Volcanic ash can be widely used in countries with high volcanic activity as an inexpensive raw material for the manufacture of building materials. It does not require additional processing and has a number of useful properties.

scholarly journals Aplikácia analytickej viacúrovňovej metódy pri výbere zatepľovacieho materiálu

2020 ◽  
Vol 19 (2) ◽  
pp. 21-26
Author(s):  
Michaela Horváthová ◽  
◽  
Linda Makovická-Osvaldová
Keyword(s):  
Thermal Insulation ◽  
Ignition Time ◽  
Insulation Material ◽  
Thermal Coefficient ◽  
Multilevel Method ◽  
Insulation Materials ◽  
Applied Method ◽  
Selection Of

The article deals with the selection of four types of insulation material based on the particular criteria. Specifically, it will be a matter of decision among facade insulation materials. We chose four species of the most used thermal insulation materials that are available on the market and are used frequently. The applied method is an analytical multilevel method that allows us to divide the whole problem into hierarchies and then compare two elements together and thus gain the weights of the criteria. Subsequently, we assessed the alternatives. The selected criteria are the price of the material, the thermal coefficient conductivity, flammability class and ignition time of the sample. The method is verified in the software BPMSG AHP priority calculator.

Sign in / Sign up

Export Citation Format

Share Document