scholarly journals NUMERICAL ANALYSIS OF VALVE STRUCTURE OF HIGH POWER MARINE ENGINE

Brodogradnja ◽  
2021 ◽  
Vol 72 (2) ◽  
pp. 115-126
Author(s):  
Deng Lijun ◽  
◽  
Huang Meng ◽  
Xin Qiangzhi ◽  
He Zongjian ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Operating Conditions ◽  
Element Analysis ◽  
Frictional Wear ◽  
Wear And Corrosion ◽  
Marine Diesel ◽  
Safety And Reliability ◽  
Exhaust Valves ◽  
Crucial Part ◽  
Overall Reliability

Valve as an important part of the gas distribution mechanism, is an crucial part of the engine. When the engine works, the valve is subjected to high temperature, high impact, frictional wear and corrosion and other harsh working conditions, and the reliable and durable valve has an important impact on the safety and reliability of the engine. In this paper, a model of four-stroke marine diesel engine valve is used as the research object, and the intake valve set and exhaust valve set models are established respectively. Heat transfer simulation and failure analysis of inlet and exhaust valves of different structures and materials under different operating conditions were carried out using finite element analysis. The results show that the different valve structures and manufacturing materials have different effects on the reliability of the valves; Changing the valve structures and choosing different valve manufacturing materials have a greater impact on the heat transfer and deformation, thus affecting the overall reliability of the valves.

Performance Evaluation of Tube-in-Tube Heat Exchanger Using Nanofluids

2015 ◽  
Vol 787 ◽  
pp. 72-76 ◽  
Author(s):  
V. Naveen Prabhu ◽  
M. Suresh
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Heat Transfer Rate ◽  
Thermal Performance ◽  
Transfer Rate ◽  
Flow Characteristics ◽  
Operating Conditions ◽  
Element Analysis ◽  
Tube Heat Exchanger

Nanofluids are fluids containing nanometer-sized particles of metals, oxides, carbides, nitrides, or nanotubes. They exhibit enhanced thermal performance when used in a heat exchanger as heat transfer fluids. Alumina (Al2O3) is the most commonly used nanoparticle due to its enhanced thermal conductivity. The work presented here, deals with numerical simulations performed in a tube-in-tube heat exchanger to study and compare flow characteristics and thermal performance of a tube-in-tube heat exchanger using water and Al2O3/water nanofluid. A local element-by-element analysis utilizing e-NTU method is employed for simulating the heat exchanger. Profiles of hot and cooling fluid temperatures, pressure drop, heat transfer rate along the length of the heat exchanger are studied. Results show that heat exchanger with nanofluid gives improved heat transfer rate when compared with water. However, the pressure drop is more, which puts a limit on the operating conditions.

Influence of the operating conditions on the heat transfer coefficient during agitated sludge drying

2002 ◽  
Author(s):  
Jean Henry Ferrasse ◽  
Sofia Chavez ◽  
Patricia Arlabosse ◽  
C. Prévot ◽  
Didier Lecomte
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Operating Conditions ◽  
Sludge Drying ◽  
The Heat Transfer Coefficient

Tire Bead Overheating in Urban Buses and Trucks Using Drum Brake Systems

1998 ◽  
Vol 26 (1) ◽  
pp. 51-62
Author(s):  
A. L. A. Costa ◽  
M. Natalini ◽  
M. F. Inglese ◽  
O. A. M. Xavier
Keyword(s):  
Heat Transfer ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Thermal Energy ◽  
Structural Integrity ◽  
Experimental Temperature ◽  
Temperature Profiles ◽  
Element Analysis ◽  
Drum Brake ◽  
Fea Model

Abstract Because the structural integrity of brake systems and tires can be related to the temperature, this work proposes a transient heat transfer finite element analysis (FEA) model to study the overheating in drum brake systems used in trucks and urban buses. To understand the mechanics of overheating, some constructive variants have been modeled regarding the assemblage: brake, rims, and tires. The model simultaneously studies the thermal energy generated by brakes and tires and how the heat is transferred and dissipated by conduction, convection, and radiation. The simulated FEA data and the experimental temperature profiles measured with thermocouples have been compared giving good correlation.

scholarly journals Experimental performance comparison between circular and elliptical tubes in evaporative condensers

2021 ◽  
Author(s):  
Giuseppe Starace ◽  
Lorenzo Falcicchia ◽  
Pierpaolo Panico ◽  
Maria Fiorentino ◽  
Gianpiero Colangelo
Keyword(s):  
Heat Transfer ◽  
Experimental Approach ◽  
Fluid Dynamic ◽  
Major Axis ◽  
Performance Comparison ◽  
Operating Conditions ◽  
Condensation Temperature ◽  
Air Cooled Condensers ◽  
Reduced Scale ◽  
Dynamic Phenomena

AbstractIn refrigeration systems, evaporative condensers have two main advantages compared to other condensation heat exchangers: They operate at lower condensation temperature than traditional air-cooled condensers and require a lower quantity of water and pumping power compared to evaporative towers. The heat and mass transfer that occur on tube batteries are difficult to study. The aim of this work is to apply an experimental approach to investigate the performance of an evaporative condenser on a reduced scale by means of a test bench, consisting of a transparent duct with a rectangular test section in which electric heaters, inside elliptical pipes (major axis 32 mm, minor axis 23 mm), simulate the presence of the refrigerant during condensation. By keeping the water conditions fixed and constant, the operating conditions of the air and the inclination of the heat transfer geometry were varied, and this allowed to carry out a sensitivity analysis, depending on some of the main parameters that influence the thermo-fluid dynamic phenomena, as well as a performance comparison. The results showed that the heat transfer increases with the tube surface exposed directly to the air as a result of the increase in their inclination, that has been varied in the range 0–20°. For the investigated conditions, the average increase, resulting by the inclination, is 28%.

scholarly journals Heat Transfer in Rotating Serpentine Passages With Trips Normal to the Flow

1992 ◽  
Vol 114 (4) ◽  
pp. 847-857 ◽  
Author(s):  
J. H. Wagner ◽  
B. V. Johnson ◽  
R. A. Graziani ◽  
F. C. Yeh
Keyword(s):  
Heat Transfer ◽  
Turbine Blade ◽  
Large Scale ◽  
Flow Direction ◽  
Operating Conditions ◽  
Transfer Model ◽  
Transfer Coefficients ◽  
Flow Equations ◽  
Turbine Blade Cooling ◽  
Heat Transfer Coefficients

Experiments were conducted to determine the effects of buoyancy and Coriolis forces on heat transfer in turbine blade internal coolant passages. The experiments were conducted with a large-scale, multipass, heat transfer model with both radially inward and outward flow. Trip strips on the leading and trailing surfaces of the radial coolant passages were used to produce the rough walls. An analysis of the governing flow equations showed that four parameters influence the heat transfer in rotating passages: coolant-to-wall temperature ratio, Rossby number, Reynolds number, and radius-to-passage hydraulic diameter ratio. The first three of these four parameters were varied over ranges that are typical of advanced gas turbine engine operating conditions. Results were correlated and compared to previous results from stationary and rotating similar models with trip strips. The heat transfer coefficients on surfaces, where the heat transfer increased with rotation and buoyancy, varied by as much as a factor of four. Maximum values of the heat transfer coefficients with high rotation were only slightly above the highest levels obtained with the smooth wall model. The heat transfer coefficients on surfaces where the heat transfer decreased with rotation, varied by as much as a factor of three due to rotation and buoyancy. It was concluded that both Coriolis and buoyancy effects must be considered in turbine blade cooling designs with trip strips and that the effects of rotation were markedly different depending upon the flow direction.

Probabilistic finite element analysis in heat transfer to a nuclear fuel rod bumper support

2004 ◽  
Vol 218 (12) ◽  
pp. 1499-1505
Author(s):  
Rama Subba Reddy Gorla
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Nuclear Fuel ◽  
Cost Effective ◽  
Distribution Functions ◽  
Cumulative Distribution ◽  
Element Analysis ◽  
Transfer Rates ◽  
Fuel Rod ◽  
Design Variables

Heat transfer from a nuclear fuel rod bumper support was computationally simulated by a finite element method and probabilistically evaluated in view of the several uncertainties in the performance parameters. Cumulative distribution functions and sensitivity factors were computed for overall heat transfer rates due to the thermodynamic random variables. These results can be used to identify quickly the most critical design variables in order to optimize the design and to make it cost effective. The analysis leads to the selection of the appropriate measurements to be used in heat transfer and to the identification of both the most critical measurements and the parameters.

Analysis of a Virtual Prototype First-Stage Rotor Blade Using Integrated Computer-Based Design Tools

2006 ◽  
Author(s):  
Michel Arnal ◽  
Christian Precht ◽  
Thomas Sprunk ◽  
Tobias Danninger ◽  
John Stokes
Keyword(s):  
Heat Transfer ◽  
Gas Flow ◽  
Thermal Loading ◽  
Cfd Simulation ◽  
Three Dimensional ◽  
Life Assessment ◽  
Element Analysis ◽  
Pressure Losses ◽  
Cooling Channels ◽  
Internally Cooled

The present paper outlines a practical methodology for improved virtual prototyping, using as an example, the recently re-engineered, internally-cooled 1st stage blade of a 40 MW industrial gas turbine. Using the full 3-D CAD model of the blade, a CFD simulation that includes the hot gas flow around the blade, conjugate heat transfer from the fluid to the solid at the blade surface, heat conduction through the solid, and the coolant flow in the plenum is performed. The pressure losses through and heat transfer to the cooling channels inside the airfoil are captured with a 1-D code and the 1-D results are linked to the three-dimensional CFD analysis. The resultant three-dimensional temperature distribution through the blade provides the required thermal loading for the subsequent structural finite element analysis. The results of this analysis include the thermo-mechanical stress distribution, which is the basis for blade life assessment.

Heat Transfer and Thermal Stress Analysis of an Optoelectronic Package

1991 ◽  
Vol 113 (3) ◽  
pp. 258-262 ◽  
Author(s):  
J. G. Stack ◽  
M. S. Acarlar
Keyword(s):  
Heat Transfer ◽  
Thermal Management ◽  
Power Dissipation ◽  
Point Of View ◽  
Optical Data ◽  
Data Link ◽  
Element Analysis ◽  
Thermally Induced ◽  
Temperature Changes ◽  
Induced Stresses

The reliability and life of an Optical Data Link transmitter are inversely related to the temperature of the LED. It is therefore critical to have efficient packaging from the point of view of thermal management. For the ODL® 200H devices, it is also necessary to ensure that all package seals remain hermetic throughout the stringent military temperature range requirements of −65 to +150°C. For these devices, finite element analysis was used to study both the thermal paths due to LED power dissipation and the thermally induced stresses in the hermetic joints due to ambient temperature changes

Analysis of Heat Transfer through PVC Window Profile Reinforced with Ti6Al4V Alloy

2016 ◽  
Vol 687 ◽  
pp. 236-242 ◽  
Author(s):  
Piotr Lacki ◽  
Judyta Różycka ◽  
Marcin Rogoziński
Keyword(s):  
Heat Transfer ◽  
Titanium Alloy ◽  
Thermal Insulation ◽  
Numerical Models ◽  
Characteristic Temperature ◽  
Permanent Deformation ◽  
Transfer Coefficients ◽  
Element Analysis ◽  
Ti6al4v Titanium Alloy ◽  
Characteristic Points

This requires the use of additional reinforcement in order to prevent excessive or permanent deformation of PVC windows. In the paper particular attention was devoted to space located in a corrosive environment exposed to chemical agents. For this purpose, proposed to change the previously used steel profiles reinforcements made of Ti6Al4V titanium alloy corrosion-resistant in the air, at sea and many types of industrial atmosphere. Analysis of the thermal insulation properties of PVC windows with additional reinforcement of profile Ti6Al4V titanium alloy was performed. PVC window set in a layer of thermal insulation was analyzed. Research was conducted using Finite Element Analysis. Numerical models and thermal calculations were made in the program ADINA, assuming appropriate material parameters. The constant internal temperature of 20 ̊ and an outer-20 ̊ was assumed. The course of temperature distribution in baffle in time 24 hours and graphs of characteristic points was obtained. The time of in which followed the steady flow of heat, as well as the course of isotherm of characteristic temperature in the baffle was determined. On the basis of numerical analysis obtained vector distribution of heat flux q [W/m2] and was determined heat transfer coefficients U [W/m2K] for the whole window with titanium reinforcement . All results were compared with the model of PVC windows reinforced with steel profile.

Sign in / Sign up

Export Citation Format

Share Document