scholarly journals Spanish Colonial Period Bricks from Churches in Laguna, Philippines: A Preliminary Chemical Characterisation Using X-ray Diffraction, Energy Dispersive X-ray Fluorescence and Fourier Transform Infrared

2021 ◽  
Vol 32 (2) ◽  
pp. 105-124
Author(s):  
Jan-Michael C. Cayme ◽  
Arturo F. Bermejo III ◽  
Chris Allen Earl T. Francia ◽  
Aniano N. Asor Jr ◽  
Eric T. Miranda
Keyword(s):  
Fourier Transform ◽  
Chemical Elements ◽  
Fourier Transform Infrared ◽  
The Philippines ◽  
Colonial Period ◽  
Energy Dispersive ◽  
Clay Material ◽  
X Ray Diffraction ◽  
Spanish Colonial ◽  
X Ray

Spanish Colonial Period brick samples dating to the 19th century from the Municipalities of Liliw and Pagsanjan in Laguna, Philippines was investigated. These samples were obtained from two church structures, a church bell tower from Liliw and a church convent from Pagsanjan. Combined X-ray diffraction (XRD), energy dispersive X-ray fluorescence (EDXRF) and Fourier transform infrared (FTIR) spectroscopy allowed the determination of chemical elements and minerals attributed to clay and sand, such as montmorillonite, quartz, corundum, hematite and calcite. On the basis of these compositions, the possible kilning conditions employed to fire the bricks during manufacture was also proposed. MATLAB™ programme was utilised in this study to interpret the data from XRD and FTIR to rationalise the overlapping peaks in the spectrum. Results show that both brick samples were made of clay material that is non-calcareous with low refractory. The firing was performed in an oxidising atmosphere or an open-air environment at an estimated temperature of between 650°C and 850°C. This preliminary study provides a baseline chemical characterisation data of colonial period bricks in the Philippines which will be useful for future conservation and restoration work not only locally but also within the Southeast Asian region.

scholarly journals Synthesis of cadmium hydroxide nanostructure via composite-hydroxide-mediated approach

2019 ◽  
Vol 9 ◽  
pp. 184798041985255 ◽  
Author(s):  
J Adnan ◽  
M Arfan ◽  
T Shahid ◽  
MZ Khan ◽  
R Masab ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Fourier Transform Infrared ◽  
Energy Dispersive ◽  
Growth Time ◽  
Scanning Electron Micrographs ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Polycrystalline cadmium hydroxide nanomaterials have successfully been synthesized by composite-hydroxide-mediated approach with growth time variation. The influence of growth time on structural, morphological, elemental, and optical properties was explored using X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectroscopy, and ultraviolet–visible spectroscopy. X-ray diffraction results revealed the hexagonal and monoclinic phases of cadmium hydroxide along with rhombohedral impurity phase of cadmium carbonate. Fourier transform infrared spectroscopy further endorsed the X-ray diffraction results and confirmed the Cd–O bonding vibrations. Time-dependent uniform distribution of spherical morphology was observed in the scanning electron micrographs of the product. The presence of cadmium and oxygen in the energy dispersive X-ray spectroscopy results fingerprinted the purity and formation of the desired nanomaterials. Crystallite size was decreased with the increase of growth time as estimated by the Debye–Scherrer method. Furthermore, the optical bandgap was measured by Tauc’s relation using ultraviolet–visible absorption spectra and found to be in the range of 3.2–3.5 eV.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

scholarly journals The Characteristics of Padamarang Magnesite under Calcination and Hydrothermal Treatment

2019 ◽  
Vol 29 (2) ◽  
Author(s):  
Mutia Dewi Yuniati ◽  
Feronika Cinthya Mawarni Putri Wawuru ◽  
Anggoro Tri Mursito ◽  
Iwan Setiawan ◽  
Lediyantje Lintjewas
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Hydrothermal Treatment ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Magnesite (MgCO3) is the main source for production of magnesium and its compound. In Indonesia, magnesite is quite rare and can be only found in limited amount in Padamarang Island, Southeast Sulawesi Provence. Thus the properties of magnesite and the reactivity degree of the obtained product are of technological importance. The aim of this work was to analyze the characteristics of Padamarang magnesite under calcination and hydrothermal treatment processes. The processes were carried out at various temperatures with range of 150-900°C for 30 minutes. The solids were characterized with respect to their chemical and physical properties by using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). SEM image indicates that magnesite was formed from thin and flat hexagon sheets. The FTIR and XRD analysis disclose that MgO formed at temperature above 300°C, where as the magnesite sample also lost its mass around 50%. These results demonstrate that Padamarang magnesite decomposes to magnesium oxide and carbon dioxide at high temperature.Magnesit (MgCO3) merupakan sumber utama untuk produksi magnesium dan senyawa-senyawanya. Di Indonesia, magnesit cukup jarang dan hanya dapat ditemukan dalam jumlah yang terbatas di Pulau Padamarang, Propinsi Sulawesi Tenggara. Oleh karena itu sifat magnesit dan derajat reaktivitas dari produk-produk magnesit penting untuk diketahui. Penelitian ini bertujuan untuk menganalisis karakteristik magnesit Padamarang dengan perlakuan kalsinasi dan hidrothermal.  Proses dilakukan pada temperatur yang bervariasi dari 150-900°C selama 30 menit. Sifat kimia dan fisika dari magnesit dikarakterisasi dengan menggunakan scanning electron microscopy dengan energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), dan X-ray diffraction (XRD). Gambar dari analisis SEM menunjukkan bahwa magnesit terbentuk dari lembaran-lembaran heksagonal yang tipis dan datar. Hasil analisis dengan FTIR dan XRD menunjukkan bahwa MgO terbentuk pada temperatur diatas 300°C, dimana sampel magnesit juga kehilangan massanya sekitar 50% pada suhu tersebut. Hal ini menunjukkan bahwa Magnesit Padamarang terdekomposisi menjadi magnesium oksida dan karbon dioksida pada temperatur tinggi.

Sign in / Sign up

Export Citation Format

Share Document