Aggregate Stability and Erosion Response to Antecedent Water Content of a Loess Soil

2009 ◽  
Vol 73 (3) ◽  
pp. 718-726 ◽  
Author(s):  
J. Vermang ◽  
V. Demeyer ◽  
W.M. Cornelis ◽  
D. Gabriels
2012 ◽  
Vol 204-208 ◽  
pp. 22-27
Author(s):  
Yan Zhu ◽  
Yun Xu Chen

Compression and collapse of unsaturated compacted loess are studied by using dry density and water content which easily controlled in engineering, the controlling range of dry density and water content are confirmed respectively. Then the deformation of compression and collapse and the frequency of engineering damager occurrence can be decreased. In addition, the mechanical characteristics of loess in different directions may differ because the loess was consolidated only under the condition of its upper weight of soil and load. The conventional mechanical experiments, including one-dimensional compress and collapse test, were conducted with the specimen of loess soil in different angle from the original horizontal plane. The test result shows that the loess is anisotropic


1996 ◽  
Vol 76 (2) ◽  
pp. 203-209 ◽  
Author(s):  
Brice D. Walsh ◽  
Angus F. MacKenzie ◽  
S. Salmins ◽  
Deborah J. Buszard

With growing pressure to reduce pesticide use, fruit growers require an alternative to herbicidal control of weeds. One option is the use of mulches or permanent vegetative ground covers, which in turn may have advantages in promoting soil physical properties and improving growth. This study examined the short-term effects of ground cover management in two newly established dwarf apple orchards in Quebec. Effects of cultivation, composted manure mulch, straw mulch, grass cover crops, a cover crop mixture of lupin and wild carrot (mixed flora) and geotextile were determined, comparing soil aggregate stability, bulk density, temperature, volumetric water content and tree growth. Straw and geotextile mulches resulted in higher soil water contents and tree growth relative to soil under grass or mixed flora ground cover. Ground cover maintained soil aggregate stability. Soil temperatures were highest under cultivation and geotextile treatments in spring and summer months, and apple yields and growth rates were greater than for ground cover treatments. Straw mulch buffered soil from temperature variation. Little effect of mulch treatments on soil bulk density was observed. Given that soil water content was the primary factor related to optimum orchard production straw and geotextile mulches promoted soil water retention and could be considered superior management options for growers, depending on costs of establishment and maintenance of the mulches. Key words: Mulches, ground cover, bulk density, aggregate stability, soil temperature, volumetric water content


2020 ◽  
Author(s):  
Svenja Roosch ◽  
Vincent Felde ◽  
Daniel Uteau ◽  
Stephan Peth

<p>Soil microaggregates are considered to play an important role in soil functioning and soil organic carbon (SOC) is of great importance for the formation and stabilization of these aggregates. The loss of SOC can occur, for example, after a change in land use and may lead to a decreased aggregate stability, which makes soils vulnerable to various threats, such as erosion or compaction. It is therefore important to understand the effect of SOC loss on aggregate stability in order to better understand and preserve the functioning of healthy soils.</p><p>We sampled two adjacent plots from a loess soil in Selhausen (North Rhine-Westphalia, Germany) in November of 2019 and measured aggregate stability and architecture of soil microaggregates. One plot was kept free from vegetation by the application of herbicides and by tillage (to a depth of 5 cm) from 2005 on, while the other plot was used for agriculture (conventional tillage). Over the course of 11 years, the SOC concentration in the bulk soil was reduced from 12.2 to 10.1 g SOC kg<sup>-1</sup> soil. We took 10 undisturbed soil cores from two depths of each plot (Ap and Bt horizons).</p><p>The stability of aggregates against hydraulic and mechanical stresses was tested using the widespread wet sieving approach and a newly developed dry crushing approach. Isolated microaggregates gained from the latter procedure were tested against tensile stress by adapting a crushing test in a load frame to the microaggregate scale. To shed light on the effect of a decreased SOC content on microaggregate structure, we scanned several microaggregates with a high-resolution computed tomography scanner (Zeiss Xradia 520 versa) at sub-micron resolutions and analyzed the features of their pore systems.</p><p>This will give us valuable insights into the interplay of mechanical and physicochemical stability, as well as the structural properties of microaggregates with regard to SOC depletion. The consequences for various soil functions provided by microaggregates, like the habitat function for microorganisms or their capacity to store and transport gas, water and nutrients, are discussed.</p>


2012 ◽  
Vol 92 (3) ◽  
pp. 529-536 ◽  
Author(s):  
Enheng Wang ◽  
Richard M. Cruse ◽  
Xiangwei Chen ◽  
Aaron Daigh

Wang, E., Cruse, R. M., Chen, X. and Daigh, A. 2012. Effects of moisture condition and freeze/thaw cycles on surface soil aggregate size distribution and stability. Can. J. Soil Sci. 92: 529–536. Freeze/thaw cycles can affect soil aggregate stability, which in turn impacts wind and water erosion. The objectives of this laboratory study were: (1) to determine the effect of variable freeze/thaw cycles and soil water conditions on aggregate size distribution and stability; and (2) to evaluate differences in aggregate size distribution and stability between disturbed soil and undisturbed soil cores as affected by freeze/thaw cycles and soil water conditions. Surface soil was collected before freezing in late fall of 2009. Aggregates isolated from disturbed soil or intact soil cores were subjected to a factorial combination of 3 gravimetric water content treatments: 0.15 m3 m−3, 0.23 m3 m−3 or 0.30 m3 m−3, and 3 freeze/thaw treatments: 0, 3, or 9 cycles. A freeze/thaw cycle involved soil freezing at –10∘C for 24 h, followed by thawing at 5∘C for 24 h. Most aggregate size classes were affected significantly (P<0.05) by freeze/thaw cycles except for wet-sieved aggregates >5 mm. Dry-sieved aggregates were relatively more sensitive to the freeze/thaw treatment than wet-sieved aggregates. The mean weight diameter (MWD) of dry-sieved aggregates was significantly (P<0.05) greater at 0.30 m3 m−3 than 0.15 m3 m−3 water content, but the opposite trend was observed for MWD of wet aggregates and aggregate stability. There was a significant (P<0.05) response of the MWD in dry-sieved aggregates to the interactive freeze/thaw×water content effect that differed for aggregates obtained from disturbed soil and those in the undisturbed soil core, but not for the MWD of wet-sieved aggregates and aggregate stability.


2016 ◽  
Vol 78 (2) ◽  
Author(s):  
Laksmita Prima SANTI ◽  
Didiek Hadjar GOENADI

Abstract A series of research was carried out with the objective to meet the challenge and determine the direction and strategy required for overcoming highly weathered Ultisol soil that impact to low productivity. Selected ameliorating materials, i.e. bio-char, compost, and peat were examined their physical characteristics to determine the best combination of them as bioameliorant carrier materials for aggregate stability bacteria.  Bio-char was found to be the most suitable carrier material as it has highest total pore spaces and available water content.  Microbial population obtained from the granular forms of bioameliorant was 107 CFU/gram of the sample until 12 months life time periods. Best vegetative growth performance of maize Bisma var. in Ultisol soil of Experiment Station (KP) Taman Bogo was shown by the application of 100% standard dosage of NPK conventional fertilizers in combination with the addition of 4.2 g/plant of bioameliorant. Yield of dry grain of maize was higher (+15.7 %) by application of 100 % standard dosage and  2.1g bioameliorant/plant (112 kg/ha) than that obtained by standard dosage of conventional fertilizer.  Abstrak Satu rangkaian kegiatan penelitian telah dilakukan untuk menjawab tantangan, arah dan strategi dari berbagai aspek yang terkait erat dengan masalah pelapukan lanjut dan berdampak pada rendahnya produktivitas tanah Ultisol.  Beberapa bahan terpilih seperti arang pirolisis (bio-char), kompos, dan gambut dianalisis secara fisik untuk menetapkan kombinasi terbaik sebagai bahan pembawa bioamelioran dengan bahan aktif bakteri pemantap agregat.  Bio-char memiliki keunggulan dalam hal total ruang pori dan  kapasitas air tersedia yang lebih tinggi.  Sampai dengan 12 bulan masa simpan, populasi bakteri pada bioamelioran granul dengan bahan pembawa bio-char berjumlah 107 CFU/gram contoh. Pertumbuhan terbaik tanaman jagung varietas Bisma pada tanah Ultisol diperoleh dari perlakuan 100 % pupuk NPK tunggal yang dikombinasikan dengan   4,2 g bioamelioran/tanaman. Sementara itu, perlakuan 100 % dosis pupuk NPK tunggal yang dikombinasikan dengan 2,1 g bioamelioran/tanaman (112 kg/ha) menghasilkan bobot pipilan kering jagung yang lebih tinggi (+15,7 %) apabila dibandingkan dengan perlakuan 100% dosis pupuk NPK tunggal saja. 


2004 ◽  
Vol 28 (1) ◽  
pp. 49-58 ◽  
Author(s):  
L. C. Timm ◽  
K. Reichardt ◽  
J. C. M. Oliveira ◽  
F. A. M. Cassaro ◽  
T. T. Tominaga ◽  
...  

The state-space approach is used to evaluate the relation between soil physical and chemical properties in an area cultivated with sugarcane. The experiment was carried out on a Rhodic Kandiudalf in Piracicaba, State of São Paulo, Brazil. Sugarcane was planted on an area of 0.21 ha i.e., in 15 rows 100 m long, spaced 1.4 m. Soil water content, soil organic matter, clay content and aggregate stability were sampled along a transect of 84 points, meter by meter. The state-space approach is used to evaluate how the soil water content is affected by itself and by soil organic matter, clay content, and aggregate stability of neighboring locations, in different combinations, aiming to contribute to a better understanding of the relation among these variables in the soil. Results show that soil water contents were successfully estimated by this approach. Best performances were found when the estimate of soil water content at locations i was related to soil water content, clay content and aggregate stability at locations i-1. Results also indicate that this state-space model using all series describes the soil water content better than any equivalent multiple regression equation.


2021 ◽  
Author(s):  
Svenja Roosch ◽  
Vincent Felde ◽  
Daniel Uteau ◽  
Stephan Peth

&lt;p&gt;Soil microaggregates are considered to play an important role in soil functioning and soil organic carbon (SOC) is of great importance for the formation and stabilization of these aggregates. The loss of SOC can occur, for example, after a change in land use and may lead to a decreased aggregate stability, which makes soils vulnerable to various threats, such as erosion or compaction. It is therefore important to shed light on the effect of SOC loss on aggregate stability in order to better understand and preserve the functioning of healthy soils.&lt;/p&gt;&lt;p&gt;We sampled two adjacent plots from a loess soil in Selhausen (Germany) and measured aggregate stability and architecture of soil microaggregates. One plot was kept free from vegetation by the application of herbicides and by tillage (to a depth of 5 cm) from 2005 on (organic matter depletion, OMD), while the other plot was used for agriculture using conventional tillage (control). Over the course of 14 years, the SOC concentration in the bulk soil has been reduced from 12.2 to 10.1 g SOC kg-1 soil. It was, however, unclear whether a loss of SOC had also taken place in microaggregates (since they are known to have very long turnover times). We took 10 undisturbed soil cores from two depths of each plot (Ap and Bt horizons).&lt;/p&gt;&lt;p&gt;The stability of aggregates against hydraulic and mechanical stresses was tested using wet sieving&amp;#160; (mesh sizes of 0.25 to 8 mm) and a crushing test in a load frame adapted to the microaggregate scale. For the latter test, microaggregates were isolated from the bulk soil using a newly developed dry crushing approach. To shed light on the effect of a decreased SOC content on microaggregate structure, we scanned several microaggregates with a computed tomography scanner at sub-micron resolution and analysed the features of their pore systems. SOC losses had also occurred in large&amp;#160; microaggregates (250-53 &amp;#181;m) in the Ap horizon: SOC contents in this fraction were 16.3 g SOC kg&amp;#8315;&amp;#185; (control) and 12.8 g SOC kg&amp;#8315;&amp;#185; (OMD). While wet sieving indicated a lower stability of macroaggregates from the Ap horizon in the OMD plot (geometric mean diameter: 1.54 mm (control) vs 0.43 mm (OMD)), an effect on the tensile strength of large microaggregates could not be found. Total porosity and pore connectivity, derived from Euler characteristic, as well as several pore skeleton traits (number of branches, junctions, etc.) were lower in aggregates from the OMD treatment. However, the difference was also present or even stronger in the Bt horizon than in the Ap horizon, so the supposed treatment effect might have been due to other effects like spatial heterogeneity of texture. Thus, the observed SOC losses may not have been large enough to substantially influence struture or stability of large microaggregates.&lt;/p&gt;


1988 ◽  
Vol 68 (2) ◽  
pp. 405-416 ◽  
Author(s):  
D. R. COOTE ◽  
C. A. MALCOLM-McGOVERN ◽  
G. J. WALL ◽  
W. T. DICKINSON ◽  
R. P. RUDRA

Soil-erodibility indices were investigated in two regions of Ontario to evaluate their seasonal variation and differences between soil types. Shear strength and water-stable aggregates >0.5 mm were strongly negatively correlated with gravimetric soil water content for a Guelph sandy loam soil in southwestern Ontario. Similar variation of shear strength was estimated in three other southwestern Ontario surface soils as a result of seasonal changes in moisture content. Shear strength and aggregate stability increased as four eastern Ontario soils, ranging in texture from loamy sand to clay, dried and warmed following spring thaw. Laboratory incubation at constant temperature and water content showed that shear strength increased in two fine-textured soils with increasing degree days but changed very little in two coarse-textured soils. At the point-of-thaw in the field, all of the eastern Ontario soils exhibited very high values of the indices 1/shear strength and 1/aggregate stability, averaging approximately 15 times those of early July. During spring fallow and seed-bed to 10% canopy periods, the mean values of these indices were 3.7 and 1.4 times, respectively, those in early July. For winter-thaw conditions in the three southwestern Ontario soils, the index 1/shear strength averaged 17 times greater than in the summer. Spring values of this index averaged approximately twice those of summer. Results suggest that Ontario soils are much more susceptible to erosion under thaw and spring conditions than later during the growing season. Soil water content and soil warming may affect the re-establishment of resistance to erosion in soils rendered erodible by freezing, thawing, and saturation. Key words: Erodibility, shear strength, aggregate stability


2013 ◽  
Vol 93 (4) ◽  
pp. 473-483 ◽  
Author(s):  
Daryl F. Dagesse

Dagesse, D. F. 2013. Freezing cycle effects on water stability of soil aggregates. Can. J. Soil Sci. 93: 473–483. The freezing process is commonly implicated as a key factor in defining the state of soil structural stability following the winter months. Controversy exists, however, regarding the efficacy, and even the net effect, of this process. The objective of the study was to establish the separate effects of the freezing, freeze–thaw and freeze-drying processes in defining soil structural stability following the over-winter period. Aggregates from soils of varying clay content (0.11, 0.33, 0.44 kg kg−1) and initial water content (0.10, 0.20 or 0.30 kg kg−1) were subjected to freeze-only (F), freeze–thaw (FT) and freeze-dry (FD) treatments. Post-treatment aggregate stability determination was via wet aggregate stability (WAS) and dispersible clay (DC). Freezing alone and freeze-dry treatments generally resulted in greater aggregate stability, while the freeze–thaw generally resulted in lower aggregate stability as compared with a control, not frozen treatment (T). These data suggest the freezing-induced desiccation process improves aggregate stability, while the addition of a thaw component following freezing, with the attendant liquid water, is responsible for degradation of aggregate stability. Clay content and initial water content are important factors governing the magnitude of this process.


Sign in / Sign up

Export Citation Format

Share Document