The Feed Enzymes Phytase, Protease and Xylanase Affect Pressure at Initial Flow and Do Not Affect Technical Properties During Pelleting of Microalgal Biomass

2021 ◽  
Author(s):  
Dejan Miladinovic ◽  
Trond Storebakken ◽  
Odd Ivar Lekang ◽  
Carlos Salas-Bringas
Heliyon ◽  
2021 ◽  
pp. e08598
Author(s):  
Dejan Dragan Miladinovic ◽  
Trond Storebakken ◽  
Odd Ivar Lekang ◽  
Carlos Salas-Bringas

1983 ◽  
Vol 50 (04) ◽  
pp. 881-884 ◽  
Author(s):  
J T Christenson ◽  
P Qvarfordt ◽  
S-E Strand ◽  
D Arvidsson ◽  
T Sjöberg ◽  
...  

SummaryThrombogenicity of graft material is involved in early graft failure in small diameter grafts. The frequently seen postoperative swelling of the leg after distal revascularization may cause an increased intramuscular pressure and early graft failure.Pairs of 4 mm polytetrafluoroethylene (PTFE) grafts were implanted. Autologous platelets were labeled with mIn-oxine. Platelet adhesiveness onto the grafts were analyzed from gamma camera images. Intramuscular pressures were measured with wick technique. Blood flow was measured. One graft served as control the other as test graft. Ninety minutes after declamping the i. m. pressure was increased in the test-leg to 30 mmHg, and later to 60 mmHg.In the control-graft platelet uptake increased to a maximum 60 min after declamping. Blood flow and i.m. pressure remained uneffected. The test-grafts were initially similar but when i.m. pressure was increased to 30 mmHg activity in the grafts increased significantly. Blood flow decreased with 12% of initial flow. When i. m. pressure was raised to 60 mmHg platelet uptake continued to increase.An increased intramuscular pressure of 30 mmHg or more significantly increase the amount of platelets adhering onto PTFE grafts, emphasizing the need for measuring intramuscular pressures after lower limb vascular revascularizations.


The article deals with the issues of glass use in the enclosing structures of large-span coverings, which have such advantages as ensuring the penetration of natural light, tightness, minimum labor costs for repair and maintenance. Design shortcomings: the high cost, the need for protection of the internal volume against the penetrating sun rays in the warm season (hothouse effect); arrangement of devices for operation of a roof. The key technical properties and characteristics of glass panels and pane-glass sets, constructive decisions, including interface to the main bearing structures of a large-span covering are given. Peculiarities of their design with due regard for ventilation and smoke removal, a drainage of condensate, ways of fight against frosting and snow drifts on the roof are reflected. Features of the account of loadings, the basic approaches to their calculation are considered. Various design solutions for the spatial metal trussed systems with the original nodal connections are presented. Information on modern solutions of translucent roofs using glass for large-span coverings is given.


2020 ◽  
Vol 782 (7) ◽  
pp. 23-27
Author(s):  
Yu.G. MESHCHERYAKOV ◽  
◽  
S.V. FEDOROV ◽  
V.P. SUCHKOV ◽  
◽  
...  
Keyword(s):  

2021 ◽  
Vol 99 (Supplement_1) ◽  
pp. 176-176
Author(s):  
B V Le Thanh ◽  
J R R Bergstrom ◽  
J D Hahn ◽  
L F Wang ◽  
E Beltranena ◽  
...  

Abstract Feed enzymes may ameliorate reduced nutrient and energy digestibility in nursery pigs. The objective was to test effects of super-dosing phytase and fiber-degrading enzymes on digestibility of DM, GE, CP, AA, and Ca. We tested supplementing a super dose (added 1,500 FYT/kg) of phytase (Ronozyme Hi-Phos) with or without carbohydrase cocktail that contained 85 FXU β-xylanase/kg, 587 U/g endo-1,4-β-glucanase, 513 U/g endo-1,3(4)-β-glucanase, 15,000 U/g hemicellulases, and 3,000 U/g pectinases in corn-soybean meal diets in a 2 × 2 factorial arrangement. Diets included 68% corn, 17% SBM, and a basal level of 500 FTU/kg of phytase, and were formulated to contain 2.50 Mcal/kg NE and 5.10 gSID Lys/Mcal NE. Eight ileal-cannulated nursery pigs (initial BW 10 kg) were fed 4 diets at 3.0 × maintenance DE (110 kcal per kg of BW0.75) for four 9-day periods in a double 4 × 4 Latin square. Apparent hindgut fermentation (AHF) was calculated as apparent total tract digestibility (ATTD) minus apparent ileal digestibility (AID). Interactions between super-dosing phytase and carbohydrase cocktail were observed. Supplementing either carbohydrase cocktail or super dose phytase, but not their combination, increased (P < 0.05) diet AID of DM, GE, CP, and most AA by 4–5%-units. Supplementing super dose phytase increased (P < 0.05) AID of P by 16%-units and ATTD of P by 10%-units. Supplementing super dose phytase or carbohydrase cocktail did not affect AID of Ca and ATTD of GE, CP, and Ca, and diet DE value. Supplementing carbohydrase cocktail without super dose phytase decreased (P < 0.05) diet AHF of DM, GE, and CP. In conclusion, dietary inclusion of super dose phytase or carbohydrase cocktail increased ileal digestibility of nutrients in nursery pigs, and thereby reduced protein entering the large intestine. Additive or synergistic effects of carbohydrase cocktail and super dose phytase were not detected.


Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1195
Author(s):  
Jianhua Zhao ◽  
Yongqiang Wang ◽  
Xuchao Ma ◽  
Sheng Li ◽  
Dianrong Gao ◽  
...  

As a new type of suspension bearing, the magnetic liquid double suspension bearing (MLDSB) is mainly supported by electromagnetic suspension and supplemented by hydrostatic support. At present, the MLDSB adopts the regulation strategy of “electromagnetic-position feedback closed-loop, hydrostatic constant-flow supply” (referred to as CFC mode). In the equilibrium position, the external load is carried by the electromagnetic system, and the hydrostatic system produces no supporting force. Thus, the carrying capacity and supporting stiffness of the MLDSB can be reduced. To solve this problem, the double closed-loop control strategy of “electromagnetic system-force feedback inner loop and hydrostatic-position feedback outer loop” (referred to as DCL mode) was proposed to improve the bearing performance and operation stability of the MLDSB. First, the mathematical models of CFC mode and DCL mode of the single DOF supporting system were established. Second, the real-time variation laws of rotor displacement, flow/hydrostatic force, and regulating current/electromagnetic force in the two control modes were plotted, compared, and analyzed. Finally, the influence law of initial current, flow, and controller parameters on the dynamic and static characteristic index were analyzed in detail. The results show that compared with that in CFC mode, the displacement in DCL mode is smaller, and the adjustment time is shorter. The hydrostatic force is equal to the electromagnetic force in DCL mode when the rotor returns to the balance position. Moreover, the system in DCL mode has better robustness, and the initial flow has a more obvious influence on the dynamic and static characteristic indexes. This study provides a theoretical basis for stable suspension control and the safe and reliable operation of the MLDSB.


Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 836
Author(s):  
Boda Ravi Kiran ◽  
S. Venkata Mohan

Microalgae are multifaceted photosynthetic microorganisms with emerging business potential. They are present ubiquitously in terrestrial and aquatic environments with rich species diversity and are capable of producing significant biomass. Traditionally, microalgal biomass is being used as food and feed in many countries around the globe. The production of microalgal-based bioactive compounds at an industrial scale through biotechnological interventions is gaining interest more recently. The present review provides a detailed overview of the key algal metabolites, which plays a crucial role in nutraceutical, functional foods, and animal/aquaculture feed industries. Bioactive compounds of microalgae known to exhibit antioxidant, antimicrobial, antitumor, and immunomodulatory effects were comprehensively reviewed. The potential microalgal species and biological extracts against human pathogens were also discussed. Further, current technologies involved in upstream and downstream bioprocessing including cultivation, harvesting, and cell disruption were documented. Establishing microalgae as an alternative supplement would complement the sustainable and environmental requirements in the framework of human health and well-being.


Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 641
Author(s):  
Vânia Pôjo ◽  
Tânia Tavares ◽  
Francisco Xavier Malcata

One of the main goals of Mankind is to ensure food system sustainability—including management of land, soil, water, and biodiversity. Microalgae accordingly appear as an innovative and scalable alternative source in view of the richness of their chemical profiles. In what concerns lipids in particular, microalgae can synthesize and accumulate significant amounts of fatty acids, a great fraction of which are polyunsaturated; this makes them excellent candidates within the framework of production and exploitation of lipids by various industrial and health sectors, either as bulk products or fine chemicals. Conventional lipid extraction methodologies require previous dehydration of microalgal biomass, which hampers economic feasibility due to the high energy demands thereof. Therefore, extraction of lipids directly from wet biomass would be a plus in this endeavor. Supporting processes and methodologies are still limited, and most approaches are empirical in nature—so a deeper mechanistic elucidation is a must, in order to facilitate rational optimization of the extraction processes. Besides circumventing the current high energy demands by dehydration, an ideal extraction method should be selective, sustainable, efficient, harmless, and feasible for upscale to industrial level. This review presents and discusses several pretreatments incurred in lipid extraction from wet microalga biomass, namely recent developments and integrated processes. Unfortunately, most such developments have been proven at bench-scale only—so demonstration in large facilities is still needed to confirm whether they can turn into competitive alternatives.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Gonzalo M. Figueroa-Torres ◽  
Jon K. Pittman ◽  
Constantinos Theodoropoulos

Abstract Background The production of microalgal biofuels, despite their sustainable and renowned potential, is not yet cost-effective compared to current conventional fuel technologies. However, the biorefinery concept increases the prospects of microalgal biomass as an economically viable feedstock suitable for the co-production of multiple biofuels along with value-added chemicals. To integrate biofuels production within the framework of a microalgae biorefinery, it is not only necessary to exploit multi-product platforms, but also to identify optimal microalgal cultivation strategies maximising the microalgal metabolites from which biofuels are obtained: starch and lipids. Whilst nutrient limitation is widely known for increasing starch and lipid formation, this cultivation strategy can greatly reduce microalgal growth. This work presents an optimisation framework combining predictive modelling and experimental methodologies to effectively simulate and predict microalgal growth dynamics and identify optimal cultivation strategies. Results Microalgal cultivation strategies for maximised starch and lipid formation were successfully established by developing a multi-parametric kinetic model suitable for the prediction of mixotrophic microalgal growth dynamics co-limited by nitrogen and phosphorus. The model’s high predictive capacity was experimentally validated against various datasets obtained from laboratory-scale cultures of Chlamydomonas reinhardtii CCAP 11/32C subject to different initial nutrient regimes. The identified model-based optimal cultivation strategies were further validated experimentally and yielded significant increases in starch (+ 270%) and lipid (+ 74%) production against a non-optimised strategy. Conclusions The optimised microalgal cultivation scenarios for maximised starch and lipids, as identified by the kinetic model presented here, highlight the benefits of exploiting modelling frameworks as optimisation tools that facilitate the development and commercialisation of microalgae-to-fuel technologies.


Sign in / Sign up

Export Citation Format

Share Document