The Impact of Electric Field on the Demulsification Efficiency in an Electrocoalescence Process

2021 ◽  
Author(s):  
Ahmed T. Yasir ◽  
Alaa Hawari ◽  
M. Baune ◽  
J. Thöming ◽  
Fei Du
Keyword(s):  
Electric Field ◽  
The Impact ◽  
Demulsification Efficiency

scholarly journals The Impact of the Electric Field on Surface Condensation of Water Vapor: Insight from Molecular Dynamics Simulation

Nanomaterials ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 64 ◽  
Author(s):  
Qin Wang ◽  
Hui Xie ◽  
Zhiming Hu ◽  
Chao Liu
Keyword(s):  
Molecular Dynamics ◽  
Water Vapor ◽  
Electric Field ◽  
Intermolecular Forces ◽  
Dynamics Simulation ◽  
Water Molecules ◽  
Attraction Force ◽  
Condensation Rate ◽  
Shape Transformation ◽  
The Impact

In this study, molecular dynamics simulations were carried out to study the coupling effect of electric field strength and surface wettability on the condensation process of water vapor. Our results show that an electric field can rotate water molecules upward and restrict condensation. Formed clusters are stretched to become columns above the threshold strength of the field, causing the condensation rate to drop quickly. The enhancement of surface attraction force boosts the rearrangement of water molecules adjacent to the surface and exaggerates the threshold value for shape transformation. In addition, the contact area between clusters and the surface increases with increasing amounts of surface attraction force, which raises the condensation efficiency. Thus, the condensation rate of water vapor on a surface under an electric field is determined by competition between intermolecular forces from the electric field and the surface.

scholarly journals Restraining Surface Charge Accumulation and Enhancing Surface Flashover Voltage through Dielectric Coating

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 750
Author(s):  
Jixing Sun ◽  
Sibo Song ◽  
Xiyu Li ◽  
Yunlong Lv ◽  
Jiayi Ren ◽  
...  
Keyword(s):  
Charge Transfer ◽  
Electric Field ◽  
Electric Fields ◽  
Transition Process ◽  
Metallic Particle ◽  
Particle Charging ◽  
Insulating Surfaces ◽  
Surface Flashover ◽  
Charging Time ◽  
The Impact

A conductive metallic particle in a gas-insulated metal-enclosed system can charge through conduction or induction and move between electrodes or on insulating surfaces, which may lead to breakdown and flashover. The charge on the metallic particle and the charging time vary depending on the spatial electric field intensity, the particle shape, and the electrode surface coating. The charged metallic particle can move between the electrodes under the influence of the spatial electric field, and it can discharge and become electrically conductive when colliding with the electrodes, thus changing its charge. This process and its factors are mainly affected by the coating condition of the colliding electrode. In addition, the interface characteristics affect the particle when it is near the insulator. The charge transition process also changes due to the electric field strength and the particle charging state. This paper explores the impact of the coating material on particle charging characteristics, movement, and discharge. Particle charging, movement, and charge transfer in DC, AC, and superimposed electric fields are summarized. Furthermore, the effects of conductive particles on discharge characteristics are compared between coated and bare electrodes. The reviewed studies demonstrate that the coating can effectively reduce particle charge and thus the probability of discharge. The presented research results can provide theoretical support and data for studying charge transfer theory and design optimization in a gas-insulated system.

scholarly journals ANALISIS HUBUNGAN SALURAN TEGANGAN TINGGI LISTRIK TERHADAP JARINGAN SELULAR DI DAERAH GRAHA INDAH TAMBAKBOYO LAMONGAN

JOUTICA ◽  
2019 ◽  
Vol 4 (2) ◽  
pp. 255
Author(s):  
Kemal Farouq Mauladi ◽  
Nurul Fuad
Keyword(s):  
Public Health ◽  
Magnetic Fields ◽  
Electric Field ◽  
Cellular Networks ◽  
Electromagnetic Fields ◽  
Electricity Generation ◽  
Negative Impact ◽  
Electrical Energy ◽  
Electric And Magnetic Fields ◽  
The Impact

Telecommunications technology is developing very rapidly, ranging from users or engineers. The development of smartphone smartphones is also increasingly in demand, so that the use of electricity needs is also increasing. The need for electricity usage has resulted in more standing voltage in some settlements. The establishment of sutet will have a negative impact on public health. In addition, the influence of electrical energy on humans occurs because the electrical energy generated by electricity generation or electricity that is channeled gives rise to electromagnetic fields. The higher the voltage required by an equipment, the greater the electric field that is distributed. Besides that, it can also find ways to reduce the negative impact of the electric and magnetic fields produced by SUTET which impacts the process of the occurrence of electric and magnetic fields on SUTET. From the problems above, the author intends to determine the effect or correlation between the impact of SUTET on cellphone network transmissions or channels. This research can later determine the negative impact caused by SUTET for the surrounding community, and the impact of SUTET radiation on cellular networks.

scholarly journals Impact of Crystalline Orientation on the Switching Field in Barium Titanate Using Piezoresponse Force Spectroscopy

2014 ◽  
Vol 1652 ◽  
Author(s):  
Nikhil K. Ponon ◽  
Daniel J. R. Appleby ◽  
Erhan Arac ◽  
Kelvin S. K. Kwa ◽  
Jonathan P. Goss ◽  
...  
Keyword(s):  
Electric Field ◽  
Phase Change ◽  
Crystal Orientation ◽  
Force Spectroscopy ◽  
Ferroelectric Domain ◽  
Switching Field ◽  
The Impact ◽  
Non Destructive ◽  
Domain Level

ABSTRACTUnderstanding crystal orientation at the ferroelectric domain level, using a non destructive technique, is crucial for the design and characterization of nano-scale devices. In this study, piezoresponse force spectroscopy (PFS) is used to identify ferroelectric domain orientation. The impact of crystal orientation on the switching field of ferroelectric BaTiO3 is also investigated at the domain level. The preferential domain orientations for BaTiO3 thin films prepared by pulsed laser deposition (PLD) in this study are [001], [101] and [111]. They have been mapped onto PFS spectra to show three corresponding switching fields of 460, 330 and 120 kV/cm respectively. In addition, the electric field at which the enhanced piezoresponse occurs was found to vary, due to a phase change. The polarization reversal occurs via a 2-step process (rotation and switching) for [101] and [111] orientations. The piezoresponse enhancement is absent for the [001] (pure switching) domains. The results demonstrate that an electric field induced phase change causes the [101] and [111] domains to reverse polarization at a lower field than the [001] domain.

Strain and electric field tunable photoelectric properties of multilayer Sb2Se3

2021 ◽  
Author(s):  
Wanxin Ding ◽  
Longhua Li
Keyword(s):  
Electric Field ◽  
Band Gap ◽  
Quantitative Relationship ◽  
Uniaxial Strain ◽  
Strain Property ◽  
Photovoltaic Properties ◽  
Electric Field Sensors ◽  
Photoelectric Properties ◽  
Photovoltaic Parameters ◽  
The Impact

Abstract Antimony selenide, Sb2Se3, has been attracted widespread attention in photovoltaic applications due to its high absorption coefficient and suitable band gap. However, the influence of uniaxial strain and electric field on the electronic and photovoltaic properties of multilayer Sb2Se3 is still unknown. Here, the quantitative relationship, such as strain-property, electric field-property, as well as thickness-property, is explored via first-principles calculations. Our results demonstrate that the band gap and photovoltaic parameters (Jsc, Voc, FF and PCE) of multilayer Sb2Se3 are not only affected by the uniaxial strain and electric field, but can also be tuned via the coupling of thickness with strain and electric field. The band-gap of multilayer Sb2Se3 is linear dependent on uniaxial strain and external electric field. We found that the effect of strain on the photovoltaic parameters could be negligible as compared with the effect of thickness. However, the effect of electric field is thickness dependent, 1 ‒ 2 layer(s) thin films are not affected while the impact of electric field increases with the increasing thickness. The quantitative strain (electric field)-properties relation of multilayer Sb2Se3 suggesting that Sb2Se3 films have a potential application in the field of strain and electric field sensors.

Electrical Characterization of E7 Liquid Crystal Molecules under the Impact of an External Electric Field (THz): A Theoretical approach

2020 ◽  
Vol 15 (2) ◽  
pp. 95-101
Keyword(s):  
Liquid Crystal ◽  
Electric Field ◽  
Order Parameter ◽  
Optical Switching ◽  
Rapid Change ◽  
Electrical Characterization ◽  
Optical Switching Devices ◽  
The Impact ◽  
Orientation Of Molecules

In this work, different parameters of E7 liquid crystal (LC) have been calculated under the influence of an electric field in THz frequency. The E7 LC parameters have positive as well as negative values of order parameter and birefringence under the influence for an electric field. The director angle of E7 LC shows fast fluctuations above the angle θ=45° and due to rapid change in the orientation of molecules, fast electro-optical switching devices based on E7 LC can be designed. The refractive index of the E7 LC maintains stability in THz frequency.

scholarly journals An extended grain boundary barrier height model including the impact of internal electric field

AIP Advances ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 115126 ◽  
Author(s):  
Bai-Xiang Xu ◽  
Zi-Qi Zhou ◽  
Peter Keil ◽  
Till Frömling
Keyword(s):  
Grain Boundary ◽  
Electric Field ◽  
Barrier Height ◽  
Internal Electric Field ◽  
The Impact ◽  
Height Model ◽  
Grain Boundary Barrier

scholarly journals Effects of Pulsed Electric Field-Assisted Osmotic Dehydration and Edible Coating on the Recovery of Anthocyanins from In Vitro Digested Berries

Foods ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 505 ◽  
Author(s):  
Gabriel Oliveira ◽  
Urszula Tylewicz ◽  
Marco Dalla Rosa ◽  
Thomas Andlid ◽  
Marie Alminger
Keyword(s):  
Gastrointestinal Tract ◽  
Electric Field ◽  
Osmotic Dehydration ◽  
Pulsed Electric Field ◽  
Edible Coating ◽  
The Stability ◽  
Berry Fruits ◽  
Shelf Stable ◽  
The Impact

Berry fruits, such as strawberries and blueberries, are rich sources of anthocyanins. Several studies have been made on the impact of non-thermal treatments on safety, shelf-life and nutritional characteristics of such products, but the effects of these processes on anthocyanin stability during digestion in the gastrointestinal tract are still not completely clear. The aim of this study was to assess the recovery of anthocyanins after simulated gastrointestinal digestion of (1) strawberry samples, pre-treated with pulsed electric field (PEF) at 100 or 200 V·cm−1, prior to osmotic dehydration (OD), and (2) blueberry samples coated with chitosan and procyanidin. After digestion, a significantly higher content of cyanidin-3-O-glucoside and malvidin-3-O-glucoside was quantified by LC-MS/MS in processed strawberry and blueberry samples, compared with the controls. The highest recovery of cyanidin-3-O-glucoside was detected in digested strawberry samples osmotically dehydrated with trehalose. The recovery of malvidin-3-O-glucoside was highest in digested blueberries coated with chitosan and stored for 14 days, compared with untreated samples or samples coated with chitosan and procyanidin. Our study shows the potential of mild PEF treatments combined with OD, or the use of edible coating, to obtain shelf-stable products without substantially affecting the composition or the stability of anthocyanins during digestion in the upper gastrointestinal tract.

Sign in / Sign up

Export Citation Format

Share Document