scholarly journals Spatial heterodyne flying spot technique for in-situ thermal characterisation of metallic sample under tensile test

2020 ◽  
Author(s):  
A. Sommier ◽  
O. Plekhov ◽  
T. Palin-Luc ◽  
E. Abisset ◽  
J.C. Batsale ◽  
...  
Keyword(s):  
Tensile Test ◽  
Metallic Sample ◽  
Flying Spot

In-situ X-ray tomography investigation of pore damage effects during a tensile test of a Ni-based single crystal superalloy

2021 ◽  
pp. 111180
Author(s):  
Keli Liu ◽  
Junsheng Wang ◽  
Bing Wang ◽  
Pengcheng Mao ◽  
Yanhong Yang ◽  
...  
Keyword(s):  
Tensile Test ◽  
Single Crystal ◽  
Single Crystal Superalloy ◽  
X Ray

scholarly journals Crack Propagation Behavior of a Ni-Based Single-Crystal Superalloy during In Situ SEM Tensile Test at 1000 °C

Crystals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1047
Author(s):  
Wenxiang Jiang ◽  
Xiaoyi Ren ◽  
Jinghao Zhao ◽  
Jianli Zhou ◽  
Jinyao Ma ◽  
...  
Keyword(s):  
Crack Propagation ◽  
Tensile Test ◽  
Single Crystal ◽  
Crack Propagation Rate ◽  
Propagation Rate ◽  
Single Crystal Superalloy ◽  
Propagation Path ◽  
Propagation Behavior ◽  
Crack Propagation Behavior

An in situ scanning electron microscope (SEM) tensile test for Ni-based single-crystal superalloy was carried out at 1000 °C. The stress displacement was obtained, and the yield strength and tensile strength of the superalloy were 699 MPa and 826 MPa, respectively. The crack propagation process, consisting of Model I crack and crystallographic shearing crack, was determined. More interestingly, the crack propagation path and rate affected by eutectics was directly observed and counted. Results show that the coalescence of the primary crack and second microcrack at the interface of a γ/γ′ matrix and eutectics would make the crack propagation rate increase from 0.3 μm/s to 0.4 μm/s. On the other hand, crack deflection decreased the rate to 0.05 μm/s. Moreover, movement of dislocations in front of the crack was also analyzed to explain the different crack propagation behavior in the superalloy.

scholarly journals Synergetic strengthening of layered steel sheet investigated using an in situ neutron diffraction tensile test

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Jung Gi Kim ◽  
Jae Wung Bae ◽  
Jeong Min Park ◽  
Wanchuck Woo ◽  
Stefanus Harjo ◽  
...  
Keyword(s):  
Neutron Diffraction ◽  
Tensile Test ◽  
Steel Sheet ◽  
In Situ Neutron Diffraction

scholarly journals Grain Refinement of Ti-15Mo-3Al-2.7Nb-0.2Si Alloy with the Rotation of TiB Whiskers by Powder Metallurgy and Canned Hot Extrusion

Metals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 126 ◽  
Author(s):  
Jiabin Hou ◽  
Lin Gao ◽  
Guorong Cui ◽  
Wenzhen Chen ◽  
Wencong Zhang ◽  
...  
Keyword(s):  
Powder Metallurgy ◽  
Tensile Test ◽  
Grain Refinement ◽  
Hot Extrusion ◽  
Dislocation Motion ◽  
Continuous Dynamic Recrystallization ◽  
Grain Sizes ◽  
The Matrix ◽  
Continuous Dynamic

In situ synthesized TiB whiskers (TiBw) reinforced Ti-15Mo-3Al-2.7Nb-0.2Si alloys were successfully manufactured by pre-sintering and canned hot extrusion via adding TiB2 powders. During pre-sintering, most TiB2 were reacted with Ti atoms to produce TiB. During extrusion, the continuous dynamic recrystallization (CDRX) of β grains was promoted with the rotation of TiBw, and CDRXed grains were strongly inhibited by TiBw with hindering dislocation motion. Eventually, the grain sizes of composites decreased obviously. Furthermore, the stress transmitted from the matrix to TiBw for strengthening in a tensile test, besides grain refinement. Meanwhile, the fractured TiBw and microcracks around them contributed to fracturing.

Effect of hydrogen on fracture behavior of Ti–6Al–4V alloy by in-situ tensile test

2010 ◽  
Vol 35 (4) ◽  
pp. 1829-1838 ◽  
Author(s):  
B.G. Yuan ◽  
H.P. Yu ◽  
C.F. Li ◽  
D.L. Sun
Keyword(s):  
Tensile Test ◽  
Fracture Behavior
Sign in / Sign up

Export Citation Format

Share Document