Coagulation and sedimentation of particulate pollutants in marine waters after wastewater outfall discharge

2006 ◽  
Vol 6 (1) ◽  
pp. 79-86
Author(s):  
J.J. Zhang ◽  
X.Y. Li
Keyword(s):  
Particle Size ◽  
Numerical Simulations ◽  
Imaging System ◽  
Benthic Communities ◽  
Image Analyzer ◽  
Marine Waters ◽  
Wastewater Disposal ◽  
Video Recorder ◽  
Fast Settling

Outfall discharge to seawater is generally used as a practical means of wastewater disposal in many coastal cities. However, deposition of solid pollutants from the wastewater on the seabed would affect the benthic communities. In the present study, both laboratory experiments and numerical simulations were carried out on the role of particle coagulation in the transport and sedimentation of sewage solid materials in marine waters after outfall discharge. Actual sewage samples were collected from two treatment plants in Hong Kong for the experimental study. A flocculator-imaging system was developed for characterization of the particle size distribution (PSD) dynamics during flocculation and dilution of sewage particles in seawater. The system consisted of an external flow-through cell, a microscopic CCD video recorder and an image analyzer. The laboratory results demonstrated that coagulation played an important role in regulating the transport of solid pollutants in marine waters. Flocculation of 30–45 min could shift the PSD considerably, transforming small particles to larger, fast-settling particle aggregates. With a growth in particle size by flocculation, the average settling velocity of the sewage particulates increased by a factor of 2 or more. In addition to the laboratory study, a mathematical model was developed to simulate the transport dynamic of wastewater particles in seawater after outfall discharge. The results of numerical simulations compared well with the experimental observations. Both laboratory and simulation results suggest the important role of coagulation in the transport and sedimentation dynamics of sewage particles in marine waters, especially in the early phase of outfall discharge. As a result, suspended solids from the wastewater discharge would deposit more closely in the vicinity of the outfall sites.

scholarly journals Acceleration statistics of finite-sized particles in turbulent flow: the role of Faxén forces

2009 ◽  
Vol 630 ◽  
pp. 179-189 ◽  
Author(s):  
E. CALZAVARINI ◽  
R. VOLK ◽  
M. BOURGOIN ◽  
E. LÉVÊQUE ◽  
J.-F. PINTON ◽  
...  
Keyword(s):  
Experimental Data ◽  
Particle Size ◽  
Probability Density Function ◽  
Numerical Simulations ◽  
Probability Density ◽  
Detailed Comparison ◽  
Point Particle ◽  
Dynamics Of Particles ◽  
Dissipative Scale

The dynamics of particles in turbulence when the particle size is larger than the dissipative scale of the carrier flow are studied. Recent experiments have highlighted signatures of particles' finiteness on their statistical properties, namely a decrease of their acceleration variance, an increase of correlation times (at increasing the particles size) and an independence of the probability density function of the acceleration once normalized to their variance. These effects are not captured by point-particle models. By means of a detailed comparison between numerical simulations and experimental data, we show that a more accurate description is obtained once Faxén corrections are included.

Correlation of Pore Structure and Permeability by SEM-Image Analysis

1990 ◽  
Vol 48 (1) ◽  
pp. 428-429
Author(s):  
C. A. Callender ◽  
Wm. C. Dawson ◽  
J. J. Funk
Keyword(s):  
Image Analysis ◽  
Pore Structure ◽  
Imaging System ◽  
Pore Space ◽  
Simulation Models ◽  
Image Analyzer ◽  
Imaging Data ◽  
Sem Images ◽  
Thin Sections ◽  
Rock Types

The geometric structure of pore space in some carbonate rocks can be correlated with petrophysical measurements by quantitatively analyzing binaries generated from SEM images. Reservoirs with similar porosities can have markedly different permeabilities. Image analysis identifies which characteristics of a rock are responsible for the permeability differences. Imaging data can explain unusual fluid flow patterns which, in turn, can improve production simulation models.Analytical SchemeOur sample suite consists of 30 Middle East carbonates having porosities ranging from 21 to 28% and permeabilities from 92 to 2153 md. Engineering tests reveal the lack of a consistent (predictable) relationship between porosity and permeability (Fig. 1). Finely polished thin sections were studied petrographically to determine rock texture. The studied thin sections represent four petrographically distinct carbonate rock types ranging from compacted, poorly-sorted, dolomitized, intraclastic grainstones to well-sorted, foraminiferal,ooid, peloidal grainstones. The samples were analyzed for pore structure by a Tracor Northern 5500 IPP 5B/80 image analyzer and a 80386 microprocessor-based imaging system. Between 30 and 50 SEM-generated backscattered electron images (frames) were collected per thin section. Binaries were created from the gray level that represents the pore space. Calculated values were averaged and the data analyzed to determine which geological pore structure characteristics actually affect permeability.

Fibrin Formation: The Role of the Fibrinogen-Fibrin Monomer Complex

1976 ◽  
Vol 36 (01) ◽  
pp. 037-048 ◽  
Author(s):  
Eric P. Brass ◽  
Walter B. Forman ◽  
Robert V. Edwards ◽  
Olgierd Lindan
Keyword(s):  
Particle Size ◽  
Induction Period ◽  
Fibrin Clot ◽  
Clot Formation ◽  
Appreciable Amount ◽  
Buffer System ◽  
Homeostatic Mechanism ◽  
Fibrin Formation ◽  
Fibrin Monomer

SummaryThe process of fibrin formation using highly purified fibrinogen and thrombin was studied using laser fluctuation spectroscopy, a method that rapidly determines particle size in a solution. Two periods in fibrin clot formation were noted: an induction period during which no fibrin polymerization occurred and a period of rapid increase in particle size. Direct measurement of fibrin monomer polymerization and fibrinopeptide release showed no evidence of an induction period. These observations were best explained by a kinetic model for fibrin clot formation incorporating a reversible fibrinogen-fibrin monomer complex. In this model, the complex serves as a buffer system during the earliest phase of fibrin formation. This prevents the accumulation of free polymerizable fibrin monomer until an appreciable amount of fibrinogen has reacted with thrombin, at which point the fibrin monomer level rises rapidly and polymerization proceeds. Clinically, the complex may be a homeostatic mechanism preventing pathological clotting during periods of elevated fibrinogen.

An Study of Influence of Imperfections on the Delamination of Diamond-Like Carbon Films

2002 ◽  
Vol 719 ◽  
Author(s):  
Myoung-Woon Moon ◽  
Kyang-Ryel Lee ◽  
Jin-Won Chung ◽  
Kyu Hwan Oh
Keyword(s):  
Cross Sections ◽  
Focused Ion Beam ◽  
Imaging System ◽  
Ion Beam ◽  
Carbon Films ◽  
Diamond Like Carbon ◽  
Glass Substrates ◽  
Atomic Force ◽  
Initiation And Propagation

AbstractThe role of imperfections on the initiation and propagation of interface delaminations in compressed thin films has been analyzed using experiments with diamond-like carbon (DLC) films deposited onto glass substrates. The surface topologies and interface separations have been characterized by using the Atomic Force Microscope (AFM) and the Focused Ion Beam (FIB) imaging system. The lengths and amplitudes of numerous imperfections have been measured by AFM and the interface separations characterized on cross sections made with the FIB. Chemical analysis of several sites, performed using Auger Electron Spectroscopy (AES), has revealed the origin of the imperfections. The incidence of buckles has been correlated with the imperfection length.

Positive Role of Synthesis Method and Hard Template on the Catalytic Performance of SAPO-34 in Methanol to Olefin Reaction.

2020 ◽  
Vol 23 ◽  
Author(s):  
Sajjad Rimaz ◽  
Reza Katal
Keyword(s):  
Particle Size ◽  
Synthesis Method ◽  
Catalytic Performance ◽  
Hard Template ◽  
Structure Directing Agent ◽  
Positive Role ◽  
Methanol To Olefin ◽  
Dg Method ◽  
Synthesis Procedure

: In the present study, SAPO-34 particles were synthesized using hydrothermal (HT) and dry gel (DG) conversion methods in the presence of diethyl amine (DEA) as an organic structure directing agent (SDA). Carbon nanotubes (CNT) were used as hard template in the synthesis procedure to introduce transport pores into the structures of the synthesized samples. The synthesized samples were characterized with different methods to reveal effects of synthesis method and using hard template on their structure and catalytic performance in methanol to olefin reaction (MTO). DG conversion method results in smaller particle size in comparison with hydrothermal method, resulting in enhancing catalytic performance. On the other side, using CNT in the synthesis procedure with DG method results in more reduction in particle size and formation of hierarchical structure which drastically improves catalytic performance.

Effect of grain size on the vapour phase hydration of monoclinic and triclinic modifications of tricalcium silicate; role of high temperature activation

1991 ◽  
Vol 56 (10) ◽  
pp. 1993-2008
Author(s):  
S. Hanafi ◽  
G. M. S. El-Shafei ◽  
B. Abd El-Hamid
Keyword(s):  
Particle Size ◽  
Vapour Phase ◽  
Tricalcium Silicate ◽  
Active Centers ◽  
Thermally Activated ◽  
Grain Sizes ◽  
Intermediate Size ◽  
Surface Active ◽  
Temperature Activation

The hydration of tricalcium silicate (C3S) with three grain sizes of monoclinic (M) and triclinic (T) modifications and on their thermally activated samples were investigated by exposure to water vapour at 80°C for 60 days. The products were investigated by XRD, TG and N2 adsorption. The smaller the particle size the greater was the hydration for both dried and activated samples from (M). In the activated samples a hydrate with 2θ values of 38.4°, 44.6° and 48.6° could be identified. Hydration increased with particle size for the unactivated (T) samples but after activation the intermediate size exhibited enhanced hydration. Thermal treatment at 950°C of (T) samples increased the surface active centers on the expense of those in the bulk. Changes produced in surface texture upon activation and/or hydration are discussed.

scholarly journals Investigating the Feasibility of Mefenamic Acid Nanosuspension for Pediatric Delivery: Preparation, Characterization, and Role of Excipients

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 574
Author(s):  
Nikhat Perween ◽  
Sultan Alshehri ◽  
T. S. Easwari ◽  
Vivek Verma ◽  
Md. Faiyazuddin ◽  
...  
Keyword(s):  
Particle Size ◽  
Mefenamic Acid ◽  
Hydroxypropyl Methylcellulose ◽  
Sodium Dodecyl ◽  
Aqueous Solubility ◽  
Oral Route ◽  
Precipitation Method ◽  
Antisolvent Precipitation

Molecules with poor aqueous solubility are difficult to formulate using conventional approaches and are associated with many formulation delivery issues. To overcome these obstacles, nanosuspension technology can be one of the promising approaches. Hence, in this study, the feasibility of mefenamic acid (MA) oral nanosuspension was investigated for pediatric delivery by studying the role of excipients and optimizing the techniques. Nanosuspensions of MA were prepared by adopting an antisolvent precipitation method, followed by ultrasonication with varying concentrations of polymers, surfactants, and microfluidics. The prepared nanosuspensions were evaluated for particle size, morphology, and rheological measures. Hydroxypropyl methylcellulose (HPMC) with varying concentrations and different stabilizers including Tween® 80 and sodium dodecyl sulfate (SLS) were used to restrain the particle size growth of the developed nanosuspension. The optimized nanosuspension formula was stable for more than 3 weeks and showed a reduced particle size of 510 nm with a polydispersity index of 0.329. It was observed that the type and ratio of polymer stabilizers were responsive on the particle contour and dimension and stability. We have developed a biologically compatible oral nanoformulation for a first-in-class drug beautifully designed for pediatric delivery that will be progressed toward further in vivo enabling studies. Finally, the nanosuspension could be considered a promising carrier for pediatric delivery of MA through the oral route with enhanced biological impact.

Sign in / Sign up

Export Citation Format

Share Document