Comparison of treatment efficiency of submerged nanofiltration membrane bioreactors using cellulose triacetate and polyamide membrane

2005 ◽  
Vol 51 (6-7) ◽  
pp. 305-312 ◽  
Author(s):  
J.-H. Choi ◽  
K. Fukushi ◽  
K. Yamamoto

This study evaluates the performance of nanofiltration membrane bioreactor (NF MBR) systems using cellulose triacetate (CA) and polyamide (PA) membranes. The results indicated that both NF membranes could produce high quality permeate in the submerged NF MBR system. In addition, hollow fiber CA membranes exhibited the capability of higher permeate productivity than PA membranes. However, to obtain high quality permeate for a long-term operation, CA membranes should be maintained using an appropriate method, such as chlorine disinfection, in order to control the membrane biodegradation. The results demonstrated that PA membranes were capable of producing higher quality permeate for a long period than CA membranes. In order to enhance the practicability of PA membranes in submerged NF MBR systems, it is required that the membranes should have the lowest possible intrinsic salt rejection.

2006 ◽  
Vol 53 (6) ◽  
pp. 131-136 ◽  
Author(s):  
J.-H. Choi ◽  
K. Fukushi ◽  
H.Y. Ng ◽  
K. Yamamoto

Nanofiltration (NF) is considered as one of the most promising separation technologies to obtain a very good-quality permeate in water and wastewater treatment. A submerged NF membrane bioreactor (NF MBR) using polyamide membranes was tested for a long-term operation and the performance of the NF MBR was compared with that of a microfiltration MBR (MF MBR). Total organic carbon (TOC) concentration in the permeate of the NF MBR ranged from 0.5 to 2.0 mg/L, whereas that of the MF MBR showed an average of 5 mg/L. This could be explained by the tightness of the NF membrane. Although the concentration of organic matter in the supernatant of the NF MBR was higher than that in the permeate due to high rejection by the NF membrane, the NF MBR showed excellent treatment efficiency and satisfactory operational stability for a long-term operation.


2011 ◽  
Vol 63 (9) ◽  
pp. 1906-1912 ◽  
Author(s):  
Simos Malamis ◽  
Andreas Andreadakis ◽  
Daniel Mamais ◽  
Constantinos Noutsopoulos

The aim of this work was to evaluate the long-term performance of a Membrane Bioreactor (MBR) that operated continuously for 2.5 years and to assess membrane fouling and biomass activity under various operating conditions. Furthermore, a method for the characterisation of influent wastewater was developed based on its separation into various fractions. The MBR system operated at the solids retention times (SRT) of 10, 15, 20 and 33 days. The increase of SRT resulted in a decrease of the fouling rate associated with the reduction of extracellular polymeric substances. Moreover, the SRT increase resulted in a significant reduction of the Oxygen Uptake Rate (OUR) due to the lower availability of substrate and in a notable decrease of the maximum OUR since high SRT allowed the development of slower growing microorganisms. Biomass consisted of small flocs due to extensive deflocculation caused by intense aeration. Finally, the method developed for wastewater characterisation is straightforward and less time consuming than the usual method that is employed.


RSC Advances ◽  
2021 ◽  
Vol 11 (50) ◽  
pp. 31364-31372
Author(s):  
Mengjing Cao ◽  
Yongxiang Zhang ◽  
Yan Zhang

A novel and amplifying anaerobic electrochemical membrane bioreactor was constructed and operated for a long time (204 days) with synthetic glucose solution having an average chemical oxygen demand (COD) of 315 mg L−1, at different applied voltages and room temperatures.


2012 ◽  
Vol 2 (2) ◽  
pp. 67-73 ◽  
Author(s):  
T. Trinh ◽  
B. van den Akker ◽  
H. M. Coleman ◽  
R. M. Stuetz ◽  
P. Le-Clech ◽  
...  

Submerged membrane bioreactors (MBRs) have attracted a significant amount of interest for decentralised treatment systems due to their small footprint and ability to produce high quality effluent, which is favourable for water reuse applications. This study provides a comprehensive overview of the capacity of a full-scale decentralised MBR to eliminate 17 endocrine disrupting chemicals (EDCs) and five indigenous microbial indicators. The results show that the MBR consistently achieved high removal of EDCs (>86.5%). Only 2 of the 17 EDCs were detected in the MBR permeate, namely two-phenylphenol and 4-tert-octylphenol. Measured log10 reduction values of vegetative bacterial indicators were in the range of 5–5.3 log10 units, and for clostridia, they were marginally lower at 4.6 log10 units. Removal of bacteriophage was in excess of 4.9 log10 units. This research shows that MBRs are a promising technology for decentralised water reuse applications.


2004 ◽  
Vol 4 (1) ◽  
pp. 143-149 ◽  
Author(s):  
T. Itonaga ◽  
Y. Watanabe

This paper deals with the performance of a hybrid membrane bioreactor (MBR) combined with pre-coagulation/sedimentation. Primary clarifier effluent in a municipal wastewater treatment plant was fed into the hybrid MBR to investigate its performance during long-term operation. Pre-coagulation/sedimentation process efficiently removed the suspended solids including organic matter and phosphorus. Comparison of the hybrid MBR and conventional MBR was made in terms of the permeate quality and membrane fouling. As the organic loading to the MBR was significantly reduced by the pre-coagulation/sedimentation, production and accumulation of extracellular polymeric substances (EPS) may be limited. Therefore, the mixed liquor viscosity in the hybrid MBR was much lower than that in the conventional MBR. These effect caused by pre-coagulation/sedimentation brought a remarkable improvement in both permeate quality and membrane permeability.


Sign in / Sign up

Export Citation Format

Share Document