scholarly journals Effect of applied voltage on membrane fouling in the amplifying anaerobic electrochemical membrane bioreactor for long-term operation

RSC Advances ◽  
2021 ◽  
Vol 11 (50) ◽  
pp. 31364-31372
Author(s):  
Mengjing Cao ◽  
Yongxiang Zhang ◽  
Yan Zhang
Keyword(s):  
Chemical Oxygen Demand ◽  
Applied Voltage ◽  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Glucose Solution ◽  
Oxygen Demand ◽  
Term Operation ◽  
Long Time

A novel and amplifying anaerobic electrochemical membrane bioreactor was constructed and operated for a long time (204 days) with synthetic glucose solution having an average chemical oxygen demand (COD) of 315 mg L−1, at different applied voltages and room temperatures.

Investigation of long-term operation and biomass activity in a membrane bioreactor system

2011 ◽  
Vol 63 (9) ◽  
pp. 1906-1912 ◽  
Author(s):  
Simos Malamis ◽  
Andreas Andreadakis ◽  
Daniel Mamais ◽  
Constantinos Noutsopoulos
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Extracellular Polymeric Substances ◽  
Operating Conditions ◽  
Term Operation ◽  
Solids Retention ◽  
Biomass Activity ◽  
Long Term Performance ◽  
Term Performance

The aim of this work was to evaluate the long-term performance of a Membrane Bioreactor (MBR) that operated continuously for 2.5 years and to assess membrane fouling and biomass activity under various operating conditions. Furthermore, a method for the characterisation of influent wastewater was developed based on its separation into various fractions. The MBR system operated at the solids retention times (SRT) of 10, 15, 20 and 33 days. The increase of SRT resulted in a decrease of the fouling rate associated with the reduction of extracellular polymeric substances. Moreover, the SRT increase resulted in a significant reduction of the Oxygen Uptake Rate (OUR) due to the lower availability of substrate and in a notable decrease of the maximum OUR since high SRT allowed the development of slower growing microorganisms. Biomass consisted of small flocs due to extensive deflocculation caused by intense aeration. Finally, the method developed for wastewater characterisation is straightforward and less time consuming than the usual method that is employed.

Performance of membrane bioreactor combined with pre-coagulation/sedimentation

2004 ◽  
Vol 4 (1) ◽  
pp. 143-149 ◽  
Author(s):  
T. Itonaga ◽  
Y. Watanabe
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Suspended Solids ◽  
Extracellular Polymeric Substances ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Municipal Wastewater Treatment ◽  
Term Operation ◽  
Made In

This paper deals with the performance of a hybrid membrane bioreactor (MBR) combined with pre-coagulation/sedimentation. Primary clarifier effluent in a municipal wastewater treatment plant was fed into the hybrid MBR to investigate its performance during long-term operation. Pre-coagulation/sedimentation process efficiently removed the suspended solids including organic matter and phosphorus. Comparison of the hybrid MBR and conventional MBR was made in terms of the permeate quality and membrane fouling. As the organic loading to the MBR was significantly reduced by the pre-coagulation/sedimentation, production and accumulation of extracellular polymeric substances (EPS) may be limited. Therefore, the mixed liquor viscosity in the hybrid MBR was much lower than that in the conventional MBR. These effect caused by pre-coagulation/sedimentation brought a remarkable improvement in both permeate quality and membrane permeability.

scholarly journals Treatment of Septic Tank Effluent by Membrane Bioreactor: A Laboratory–scale Feasibility Study

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
C–Y. Chang ◽  
Roger Ben Aim ◽  
S. Vigneswaran ◽  
J–S. Chang ◽  
S–L. Chen
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Extracellular Polymeric Substances ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Laboratory Scale ◽  
Septic Tank ◽  
Term Operation ◽  
Water Cleaning ◽  
Septic Tank Effluent

A laboratory scale membrane bioreactor (MBR) fed on real septic tank effluent was studied at different levels of alkalinity (0, 250 and 500 mg NaHCO3/L addition) and sludge retention time (SRT, complete sludge retention, 10 and 20 days). A long–term operation of 267 days was divided into 5 stages to examine the SRT and alkalinity influences on parameters related to nitrification, chemical oxygen demand (COD) removal, extracellular polymeric substances (EPS) production and membrane cleaning. The results of the study showed that the removals of TCOD, SCOD and NH4+–N varied between 86–94%, 71–86%, and 70–94%, respectively. Appropriate alkalinity supplement and SRT control can enhance the COD removal and nitrification. Irreversible membrane fouling occurred fast and water cleaning for the improvement of filtration capacity was ineffective. The results also revealed that the rejection of EPS played a major role both in the enhancement of removal efficiency as well as the increase of filtration resistance during the operation.

scholarly journals Reactor performance and membrane fouling of a novel submerged aerobic granular sludge membrane bioreactor during long-term operation

2017 ◽  
Vol 9 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Jianfeng Li ◽  
Yanjun Liu ◽  
Xiaoning Li ◽  
Fangqin Cheng
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Sewage Treatment ◽  
Granular Sludge ◽  
Synthetic Wastewater ◽  
Aerobic Granular Sludge ◽  
Municipal Sewage ◽  
Reactor Performance ◽  
Term Operation

Abstract The aerobic granular sludge membrane bioreactor (AGS-MBR) has the potential for simultaneous carbon/nitrogen removal and membrane fouling mitigation. Most studies have focused on comparison of granular sludge MBR and flocculent sludge MBR in short-term tests using synthetic wastewater. In this study, two identical AGS-MBRs were developed, and the reactor performance and membrane fouling were examined systemically over 120 days for synthetic wastewater and municipal sewage treatment, respectively. Results showed that regular granules with good settling ability were developed and maintained throughout the experimental period. Regardless of the substrate type, AGS-MBR demonstrated a stable removal of carbon (85–95%) and nitrogen (50–55%) in long-term operation. In addition, the membrane fouling propensity is apparently lower in AGS-MBRs with no membrane cleaning for 4 months at a flux of 20 L m−2h−1. The filtration resistance analysis indicates that the main membrane resistance was caused by irreversible fouling in both of the reactors. Membrane foulant analysis indicates that proteins in extracellular polymeric substances are more prone to be attached by the membrane of AGS-MBRs because of their hydrophobic nature. This study shows that AGS-MBR is effective and stable for municipal sewage treatment and reuse during long-term operation.

New urban wastewater treatment with autotrophic membrane bioreactor at low chemical oxygen demand/N substrate ratio

2013 ◽  
Vol 69 (5) ◽  
pp. 960-965 ◽  
Author(s):  
Y. Yang ◽  
G. Lesage ◽  
M. Barret ◽  
N. Bernet ◽  
A. Grasmick ◽  
...  
Keyword(s):  
Chemical Oxygen Demand ◽  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Municipal Wastewater ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Physicochemical Process ◽  
Suspended Solid ◽  
Nitrogen Loading ◽  
Limiting Factor

The potential for total nitrogen removal from municipal wastewater has been evaluated in an autotrophic membrane bioreactor running with a low chemical oxygen demand (COD)/N ratio to simulate its combination with an upstream physicochemical process that retains a large proportion of organic matter. The tests were conducted in a laboratory scale submerged membrane bioreactor loaded with a synthetic influent. Nitrogen loading rate was 0.16 kgN−NH4+.m−3.d−1 and sodium acetate was added as a carbon source. Results have shown that nitrogen elimination can reach 85% for a COD/N ratio of 5, with COD removal exceeding 97%. However, a COD/N ratio of 3.5 was found to be the limiting factor for successfully reaching the overall target value of 10 mgN.L−1 in the effluent. Nevertheless, low COD/N ratios make it possible to work with low total suspended solid concentrations in the bioreactor, which greatly facilitates membrane fouling control by a simple aeration and backwashing strategy.

scholarly journals SMP Production in an Anaerobic Submerged Membrane Bioreactor (AnMBR) at Different Organic Loading Rates

Membranes ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 317
Author(s):  
Sandra C. Medina ◽  
Nataly Zamora-Vacca ◽  
Hector J. Luna ◽  
Nicolas Ratkovich ◽  
Manuel Rodríguez Susa
Keyword(s):  
Membrane Fouling ◽  
Energy Demand ◽  
Membrane Surface ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Term Operation ◽  
Submerged Membrane Bioreactor ◽  
Anaerobic Membrane Bioreactors ◽  
Microbial Products

Anaerobic membrane bioreactors (AnMBRs) have demonstrated an excellent capability to treat domestic wastewater. However, biofouling reduces membrane permeability, increasing operational costs and overall energy demand. Soluble microbial products (SMPs) that build up on the membrane surface play a significant role in the biofouling. In this study, the production of SMPs in a 32 L submerged AnMBR operated at three different organic loads (3.0, 4.1 and 1.2 kg chemical oxygen demand (COD)/m3d for phases 1, 2 and 3, respectively) during long-term operation of the reactor (144, 83 and 94 days) were evaluated. The samples were taken from both the permeate and the sludge at three different heights (0.14, 0.44 and 0.75 m). Higher production of SMPs was obtained in phase 2, which was proportional to the membrane fouling. There were no statistically significant differences (p > 0.05) in the SMPs extracted from sludge at different heights among the three phases. In the permeate of phases 1, 2 and 3, the membrane allowed the removal of 56%, 70% and 64% of the SMP concentration in the sludge. SMPs were characterized by molecular weight (MW). A bimodal behavior was obtained, where fractions prevailed with an MW < 1 kDa, associated with SMPs as utilization-associated products (UAPs) caused fouling by the pore-blocking mechanism. The chemical analysis found that, in the SMPs, the unknown COD predominated over the known COD, such as carbohydrates and proteins. These results suggest that further studies in SMP characterization should focus on the unknown COD fraction to understand the membrane fouling in AnMBR systems better.

scholarly journals Energy consumption in a baffled membrane bioreactor (B-MBR): estimation based on long-term continuous operation

2019 ◽  
Vol 80 (6) ◽  
pp. 1011-1021 ◽  
Author(s):  
T. Miyoshi ◽  
T. P. Nguyen ◽  
T. Tsumuraya ◽  
K. Kimura ◽  
Y. Watanabe
Keyword(s):  
Energy Consumption ◽  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Specific Energy Consumption ◽  
Oxygen Demand ◽  
Full Scale ◽  
Continuous Operation ◽  
Operating Conditions ◽  
Stable Operation

Abstract We investigated the operating conditions of a baffled membrane bioreactor (B-MBR) under which long-term stable operation can be achieved through the continuous operation of a pilot-scale B-MBR. Under appropriate operating conditions, the B-MBR was capable of achieving excellent treated water quality in terms of biochemical oxygen demand and concentration of total nitrogen. Excellent removal of total phosphorus was also achieved. In addition, the degree of membrane fouling was acceptable, indicating that stable continuous operation of a B-MBR is possible under the operating conditions adopted in the present study. Estimation of the specific energy consumption in hypothetical full-scale B-MBRs operated under the conditions recommended by the findings was also performed in this study. The results suggest that energy consumption in full-scale B-MBRs would be in the range of 0.20–0.22 kWh/m3. These results strongly suggest that energy consumption in MBR operation can be significantly reduced by applying the concept of a B-MBR.

scholarly journals Multivariate Chemometric Analysis of Membrane Fouling Patterns in Biofilm Ceramic Membrane Bioreactor

Water ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 982 ◽  
Author(s):  
Olga Kulesha ◽  
Zakhar Maletskyi ◽  
Harsha Ratnaweera
Keyword(s):  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Ceramic Membrane ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Operating Conditions ◽  
Volume Index ◽  
Least Squares Regression ◽  
Effective Lifetime ◽  
Term Operation

Membrane fouling highly limits the development of Membrane bioreactor technology (MBR), which is among the key solutions to water scarcity. The current study deals with the determination of the fouling propensity of filtered biomass in a pilot-scale biofilm membrane bioreactor to enable the prediction of fouling intensity. The system was designed to treat domestic wastewater with the application of ceramic microfiltration membranes. Partial least squares regression analysis of the data obtained during the long-term operation of the biofilm-MBR (BF-MBR) system demonstrated that Mixed liquor suspended solids (MLSS), diluted sludge volume index (DSVI), chemical oxygen demand (COD), and their slopes are the most significant for the estimation and prediction of fouling intensity, while normalized permeability and its slope were found to be the most reliable fouling indicators. Three models were derived depending on the applied operating conditions, which enabled an accurate prediction of the fouling intensities in the system. The results will help to prevent severe membrane fouling via the change of operating conditions to prolong the effective lifetime of the membrane modules and to save energy and resources for the maintenance of the system.

Sign in / Sign up

Export Citation Format

Share Document