Occurrence and persistence of bacterial and viral faecal indicators in wastewater biofilms

2007 ◽  
Vol 55 (8-9) ◽  
pp. 377-385 ◽  
Author(s):  
S. Skraber ◽  
K. Helmi ◽  
R. Willame ◽  
M. Ferréol ◽  
C. Gantzer ◽  
...  
Keyword(s):  
Dynamic Equilibrium ◽  
Wastewater Treatment Plants ◽  
Plate Count ◽  
Cryptosporidium Oocysts ◽  
The Matrix ◽  
Thermotolerant Coliforms ◽  
Viral Indicators ◽  
The Stability ◽  
Faecal Indicators ◽  
Giardia Cysts

Biofilms within wastewater treatment plants can capture enteric microorganisms initially present in the water phase immobilising them either definitively or temporarily. Consequently, fates of microorganisms may totally change depending on whether they interact or not with biofilms. In this study, we assessed the stability of wastewater biofilms comparing the evolution of the concentrations of bacteria (heterotrophic plate count [HPC], thermotolerant coliforms [TC]) and viral (somatic coliphages [SC] and F-specific phages [F+]) indicators in the biofilms and in the corresponding wastewaters at 4 and 20 °C. Additionally, we assessed the monthly occurrence of these bacterial and viral indicators as well as of pathogenic protozoa (Cryptosporidium oocysts and Giardia cysts) in three native wastewater biofilms for four months. Our results show that viral indicators (SC and F+) persist longer in biofilms than in the corresponding wastewaters at 4 °C as well as at 20 °C. In contrast, persistence of bacterial indicators (TC and HPC) depends on both the temperature and the matrix. Differences between viral and bacterial persistence are discussed. Monthly analysis of native wastewater biofilms shows that bacterial and viral indicators, as well as Cryptosporidium oocysts and Giardia cysts, attach to wastewater biofilms to a concentration that remains stable in time, probably as a result of a dynamic equilibrium between attachment and detachment processes.

Drying of Cryptosporidium oocysts and Giardia cysts to slides abrogates use of vital dyes for viability staining

2014 ◽  
Vol 96 ◽  
pp. 68-69 ◽  
Author(s):  
Lucy J. Robertson ◽  
Stijn Casaert ◽  
Yazel Valdez-Nava ◽  
Md. Amimul Ehsan ◽  
Edwin Claerebout
Keyword(s):  
Viability Staining ◽  
Vital Dyes ◽  
Cryptosporidium Oocysts ◽  
Giardia Cysts

scholarly journals Stability of Nonlinear Autonomous Quadratic Discrete Systems in the Critical Case

2010 ◽  
Vol 2010 ◽  
pp. 1-23 ◽  
Author(s):  
Josef Diblík ◽  
Denys Ya. Khusainov ◽  
Irina V. Grytsay ◽  
Zdenĕk Šmarda
Keyword(s):  
Lyapunov Functions ◽  
Critical Case ◽  
Autonomous Systems ◽  
Discrete Systems ◽  
Simple Eigenvalue ◽  
Discrete Equations ◽  
The Matrix ◽  
The Stability ◽  
Important Characterization

Many processes are mathematically simulated by systems of discrete equations with quadratic right-hand sides. Their stability is thought of as a very important characterization of the process. In this paper, the method of Lyapunov functions is used to derive classes of stable quadratic discrete autonomous systems in a critical case in the presence of a simple eigenvalueλ=1of the matrix of linear terms. In addition to the stability investigation, we also estimate stability domains.

scholarly journals Coupled THM and Matrix Stability Modeling of Hydroshearing Stimulation in a Coupled Fracture-Matrix Hot Volcanic System

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Yong Xiao ◽  
Jianchun Guo ◽  
Hehua Wang ◽  
Lize Lu ◽  
John McLennan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conduction ◽  
Dominant Role ◽  
Injection Well ◽  
Time Step ◽  
Volcanic System ◽  
Induced Stress ◽  
The Matrix ◽  
Matrix Stability ◽  
The Stability

A coupled thermal-hydraulic-mechanical (THM) model is developed to simulate the combined effect of fracture fluid flow, heat transfer from the matrix to injected fluid, and shearing dilation behaviors in a coupled fracture-matrix hot volcanic reservoir system. Fluid flows in the fracture are calculated based on the cubic law. Heat transfer within the fracture involved is thermal conduction, thermal advection, and thermal dispersion; within the reservoir matrix, thermal conduction is the only mode of heat transfer. In view of the expansion of the fracture network, deformation and thermal-induced stress model are added to the matrix node’s in situ stress environment in each time step to analyze the stability of the matrix. A series of results from the coupled THM model, induced stress, and matrix stability indicate that thermal-induced aperture plays a dominant role near the injection well to enhance the conductivity of the fracture. Away from the injection well, the conductivity of the fracture is contributed by shear dilation. The induced stress has the maximum value at the injection point; the deformation-induced stress has large value with smaller affected range; on the contrary, thermal-induced stress has small value with larger affected range. Matrix stability simulation results indicate that the stability of the matrix nodes may be destroyed; this mechanism is helpful to create complex fracture networks.

Impact of a wastewater treatment plant on Cryptosporidium oocysts and Giardia cysts occurring in a surface water

2000 ◽  
Vol 41 (7) ◽  
pp. 31-37 ◽  
Author(s):  
E. Carraro ◽  
E. Fea ◽  
S. Salva ◽  
G. Gilli
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Municipal Wastewater Treatment ◽  
Mean Values ◽  
Cryptosporidium Oocysts ◽  
The Impact ◽  
Receiving Water ◽  
Giardia Cysts

The aim of this study was to assess the impact of a municipal wastewater treatment plant (MWTP) on the occurrence of Cryptosporidium oocysts and Giardia cysts in the receiving water. All MWTP effluent samples were Giardia and Cryptosporidium contaminated, although low mean values were found for both parasites (0.21±0.06 oocysts/L; 1.39±0.51 cysts/L). Otherwise, in the raw sewage a greater concentration was detected (4.5±0.3 oocysts/L; 53.6±6.8 cysts/L). The major occurrence of Giardia over Cryptosporidium, both in the influent and in the effluent of the MWTP, is probably related to the human sewage contribution to the wastewater. Data on protozoa contamination of the receiving water body demonstrated similar concentrations in the samples collected before (0.21±0.07 oocysts/L; 1.31±0.38 cysts/L) and after (0.17±0.09 oocysts/L and 1.01±1.05 cysts/L) the plant effluent discharge. The results of this study suggest that the MWTP has no impact related to Giardia and Cryptosporidium river water contamination, and underline the need for investigation into the effectiveness of these protozoa removal by less technologically advanced MWTPs which are the most widespread and could probably show a lower ability to reduce protozoa.

Investigation of Thermochemical Hydrogen Production via the Novel Thermo-Mechanical Stabilized Iron Oxide-Zirconia Porous Structure

2013 ◽  
Author(s):  
Ayyoub M. Mehdizadeh ◽  
Kelvin Randhir ◽  
James F. Klausner ◽  
Nicholas AuYeung ◽  
Fotouh Al-Raqom ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Porous Structure ◽  
Chemical Reactivity ◽  
Thermal Reduction ◽  
The Novel ◽  
Concentrated Solar Energy ◽  
The Matrix ◽  
Unique Method ◽  
Laboratory Scale Reactor ◽  
The Stability

In this study we have developed a unique method for synthesizing very reactive water splitting materials that will remain stable at temperatures as high as 1450 °C to efficiently produce clean hydrogen from concentrated solar energy. The hydrogen production for a laboratory scale reactor using a “Thermo-mechanical Stabilized Porous Structure” (TSPS) is experimentally investigated for oxidation and thermal reduction temperatures of 1200 and 1450 °C, respectively. The stability and reactivity of a 10 g TSPS over many consecutive oxidation and thermal reduction cycles for different particle size ranges has been investigated. The novel thermo-mechanical stabilization exploits sintering and controls the geometry of the matrix of particles inside the structure in a favorable manner so that the chemical reactivity of the structure remains intact. The experimental results demonstrate that this structure yields peak hydrogen production rates of 1–2 cm3/(min.gFe3O4) during the oxidation step at 1200 °C and the 30 minute thermal reduction step at 1450 ° C without noticeable degradation over many consecutive cycles. The hydrogen production rate is one of the highest yet reported in the open literature for thermochemical looping processes using thermal reduction. This novel process has strong potential for developing an enabling technology for efficient and commercially viable solar fuel production.

scholarly journals Interactions of the matrix attachment region of DNA with the matrix proteins from the copper preincubated liver nuclei.

1995 ◽  
Vol 42 (2) ◽  
pp. 205-210 ◽  
Author(s):  
P Widłak ◽  
J Rogoliński ◽  
J Rzeszowska-Wolny
Keyword(s):  
Rat Liver ◽  
Copper Ions ◽  
Specific Interaction ◽  
Protein Composition ◽  
Matrix Proteins ◽  
Matrix Attachment Region ◽  
The Matrix ◽  
Attachment Region ◽  
Liver Nuclei ◽  
The Stability

Preincubation of rat liver nuclei with copper ions influenced the stability and protein composition of the nuclear matrices isolated by a "high salt" method. Also the specific interaction between matrix proteins and the kappa Ig matrix attachment region of DNA was affected.

Effect of Heat-Treatment Time on Microstructure and Mechanical Properties of Mg-5Gd-2Y-2Zn-0.5Zr Alloy

2012 ◽  
Vol 482-484 ◽  
pp. 1384-1389 ◽  
Author(s):  
Ling Gang Meng ◽  
Can Feng Fang ◽  
Peng Peng ◽  
Nai Pu Li ◽  
Qiong Zhu ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Treatment Time ◽  
Time Range ◽  
Lpso Phase ◽  
High Temperature Heat Treatment ◽  
Lpso Structure ◽  
The Matrix ◽  
New Type ◽  
The Stability

Microstructure evolution of Mg-5Gd-2Y-2Zn-0.5Zr alloy during high temperature heat-treatment at 500°C in the time range 10-70h was investigated. The results show that after adding the element Y, the as-cast Mg-5Gd-2Y-2Zn-0.5Zr alloy forms the Mg12Zn(Y,Gd) phase with 18R-LPSO structure at the grain boundary. During heat-treatment at 500°C, the stability of 18R-LPSO structure is weakened by Gd atoms, parts of LPSO phases dissolve gradually into the matrix with time prolonged and a new type Mg(Y,Gd)Zn phase come into being. LPSO phase in the grain boundary can ensure the ultimate tensile strength and elongation of the alloy, and effect of dissevering on the LPSO phase by Mg(Gd,Y)Zn phase results the decrease of UTS and elongation.

scholarly journals Potentiometric Response of Ag/AgCl Chloride Sensors in Model Alkaline Medium

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Farhad Pargar ◽  
Hristo Kolev ◽  
Dessi A. Koleva ◽  
Klaas van Breugel
Keyword(s):  
Alkaline Medium ◽  
Open Circuit Potential ◽  
Dynamic Equilibrium ◽  
Chloride Concentration ◽  
Chloride Content ◽  
Cementitious Materials ◽  
Open Circuit ◽  
Potentiometric Response ◽  
Before And After ◽  
The Stability

The stability and reproducibility of an Ag/AgCl sensors’ response in an alkaline medium are important for the application of these sensors in cementitious materials. The sensors’ response, or their open circuit potential (OCP), reflects a dynamic equilibrium at the sensor/environment interface. The OCP response in an alkaline medium is affected by the presence of hydroxide ions. The interference of hydroxide ions leads to inaccuracies or a delay in the sensors’ response to a certain chloride content. In this article, the potentiometric response (or OCP evolution) of the chloride sensors is measured in model solutions, resembling the concrete pore water. The scatter of the sensors’ OCP is discussed with respect to the interference of hydroxide ions at varying chloride concentration in the medium. The deviation of the sensor’s response from its ideal performance (determined by the Nernst law) is attributed to dechlorination of the AgCl layer and the formation of Ag2O on the sensor’s surface. Results from the surface XPS analysis of the AgCl layer before and after treatment in alkaline medium confirm these observations in view of chemical transformation of AgCl to Ag2O.

Sign in / Sign up

Export Citation Format

Share Document