scholarly journals Valuable product production from wood mill effluents

2010 ◽  
Vol 62 (10) ◽  
pp. 2294-2300 ◽  
Author(s):  
T. Mato ◽  
M. Ben ◽  
C. Kennes ◽  
M. C. Veiga

Fibreboard production is one of the most important industrial activities in Galicia (Spain). Great amounts of wastewater are generated, with properties depending on the type of wood, treatment process, final product and water reusing, among others. These effluents are characterized by a high chemical oxygen demand (COD), low pH and nutrients limitation. Aerobic and anaerobic processes have been used for their treatment. Presently, bioplastics production (mainly polyhydroxyalkanoates or PHA) from wastewaters with mixed cultures is being studied. Substrate requirements for these processes are a high organic matter content and low nutrient concentration. Therefore, wood mill effluents could be a suitable feedstock. PHA production from wastewaters is carried out in three steps. First, complex organic matter is converted into volatile fatty acids (VFA) through acidogenic fermentation. Then, VFA are used as substrate in an aerobic sequencing batch reactor (SBR), in which the enrichement of PHA producing bacteria from a mixed culture is favoured. Finally, the sludge from the SBR is fed with a pulse containing high VFA concentrations, resulting in PHA accumulation inside the cells. In this work, the possibility of applying this process to wood mill effluents is proposed. An acidification percentage of 37% and a storage yield (YSTO) of 0.23 Cmmol/Cmmol were obtained.

2011 ◽  
Vol 63 (6) ◽  
pp. 1196-1202 ◽  
Author(s):  
M. Ben ◽  
T. Mato ◽  
A. Lopez ◽  
M. Vila ◽  
C. Kennes ◽  
...  

Fibreboard production is one of the most important industrial activities in Galicia (Spain). Great amounts of wastewater are generated, with properties depending on the type of wood, treatment process, final product and water reusing, among others. These effluents are characterized by a high chemical oxygen demand, low pH and nutrients limitation. Although anaerobic digestion is one of the most suitable processes for the treatment, lately bioplastics production (mainly polyhydroxyalkanoates) from wastewaters with mixed cultures is being evaluated. Substrate requirements for these processes consist of high organic matter content and low nutrient concentration. Therefore, wood mill effluents could be a suitable feedstock. In this work, the possibility of producing bioplastics from to wood mill effluents is evaluated. First, wood mill effluent was converted to volatile fatty acids in an acidogenic reactor operated at two different hydraulic retention times of 1 and 1.5 d. The acidification percentage obtained was 37% and 42%, respectively. Then, aerobic batch assays were performed using fermented wood mill effluents obtained at different hydraulic retention times. Assays were developed using different cultures as inoculums. The maximum storage yield of 0.57 Cmmol/Cmmol was obtained when when the culture was enriched on a synthetic media.


2021 ◽  
Vol 941 (1) ◽  
pp. 012001
Author(s):  
Basamykina Alena ◽  
Kurkina Ekaterina ◽  
Kameristaya Maria

Abstract Biological treatment methods are used to remove organic and some inorganic substances from wastewater using the simplest organisms that use these substances for nutrition, breaking them down using cellular processes. The article deals with the aerobic, anaerobic and anoxic stages of biological wastewater treatment. Their differences are explained and the best way to use biological processes is analyzed according to the type of industry/production. At wastewater treatment plants, anaerobic treatment is often used at first to remove a significant part of organic substances from wastewater before sending them for further aerobic treatment. Aerobic treatment is effective for various types of wastewater, especially with lower biochemical oxygen demand (BOD) and chemical oxygen demand (COD). A comparative analysis of wastewater composition from food, oil and gas processing, pharmaceutical and pulp and paper industries was carried out. In the presence of organic compounds, the technology is chosen depending on the total organic matter content or the total COD content, which characterizes the total organic matter in water. A combination of anaerobic and aerobic methods is possible, if a discharge into the sewer system or into water bodies is required. The grounds for the application of biological wastewater treatment of these industries are given.


2020 ◽  
Vol 03 (02) ◽  
pp. 1-1
Author(s):  
Sofía Albolafio ◽  
◽  
María I. Gil ◽  
Ana Allende ◽  
Epameinondas Xanthakis ◽  
...  

The present study aimed to characterize wastewater fractions obtained after the wet extraction of proteins from legumes. In addition, the suitability of wastewater fractions for the potential recovery of high value-added compounds was also examined, and consequently, the prevention of the environmental impact of these wastes was explored. Similar to the industrial production of proteins, wet alkaline and acidic extractions of proteins from faba bean and pea flours were performed in two stages of extraction. The different wastewater fractions were characterized by measuring their organic matter content, total solids (TS), total dissolved solids (TDS), electrical conductivity (EC), pH, and turbidity. The value-added compounds from these wastewater fractions were quantified, which included the protein content, carbohydrate content, phenolic content, and antioxidant activity. In addition, the phenolic compounds in these factions were identified and quantified. It was observed that the fractions obtained in the first extraction stage had 60%–90% higher organic matter content, measured as the chemical oxygen demand (COD), compared to the second fractions, indicating a higher environmental impact of the former in case of disposal. The results obtained for COD, TS, TDS, EC, pH, and turbidity demonstrated that microfiltration reduced only the turbidity (85%), and consequently, a decrease was observed in the particulate matter, while there was a practically negligible reduction in the soluble matter. Wastewater from faba exhibited the highest polyphenol content and antioxidant activity, and was, therefore, considered the most valuable fraction for potential valorization.


1972 ◽  
Vol 79 (3) ◽  
pp. 541-542 ◽  
Author(s):  
F. D. DeB. Hovell ◽  
E. R. Ørskov

The conventional method for the determination of the organic matter content of diets and faeces is by ashing the sample at 550 °C (A.O.A.C, 1965)Organic matter (O.M.) = dry matter (D.M.)–ash.If the sample contains calcium carbonate, then some of this carbonate will be converted to oxide (Vogel, 1951) and the weight of carbon dioxide evolved will be calculated as organic matter. The amount of carbonate converted will be dependent upon the temperature at which the sample is ashed and the duration of the ashing process. We have found (Ørskov, Hovell & Allen, 1966; Hovell & Greenhalgh, 1972) that when calcium salts of volatile fatty acids are included in diets given to sheep, most of the calcium is excreted in the faeces as carbonate, and since apparent digestibility is the difference between the amounts of nutrient ingested and excreted, the estimation of the apparent digestibility of organic matter will be in error if no correction is made for the high calcium carbonate content of the faeces. For example, a diet which contained 9·2% of calcium acetate had a true organic matterapparent digestibility of 86·8%. Had no correction been made this would have been estimated as 84·9%.


1998 ◽  
Vol 78 (1) ◽  
pp. 115-120 ◽  
Author(s):  
J. Chiquette ◽  
C. Benchaar

Eight dairy heifers (297 ± 11 kg) fitted with a ruminal cannula were used in this study. The following diets were fed in a replicated, concurrently run 4 × 4 Latin square design: 1) 80% chopped timothy hay + 20% rolled barley (HF); 2) HF + 10 g head d−1 of a mixture of Saccharomyces cerevisiae and Aspergillus oryzae (HF + SA); 3) 50% chopped timothy hay + 47.6% rolled barley and 2.4% soya supplement (HC); 4) HC + SA. Feed was offered every 2 h. A sample of whole rumen contents (liquid and solid) was collected 1 h after the 07:00 h feeding to isolate the bacteria associated with the liquid phase (BAL) and the bacteria adherent to the solid phase (BAS). Organic matter (OM) content of BAS was greater (P ≤ 0.0001) than that of BAL, independently of the type of diet fed and of the presence or absence of the pro-biotic mixture. Oppositely, total nitrogen content (N), expressed as g 100 g−1 OM, was greater (P ≤ 0.0001) in the BAL fraction than in the BAS fraction, the difference in N between the two bacterial fractions being more pronounced with the HF diet (P ≤ 0.05). Organic matter content in both bacterial fractions was greater (P ≤ 0.05) when heifers were fed the HC diet. Addition of probiotic had no effect on OM or N content of each bacterial fraction. Significant differences between amino acid composition of BAL and BAS were observed for 10 out of 16 amino acids studied. For most amino acids, differences in content observed between BAL and BAS were maintained independently of the probiotic supplementation whereas diet affected the relative composition of the bacterial fractions for five amino acids. Finally, addition of probiotics did not affect molar proportions of ruminal volatile fatty acids, which were affected by the diet. Key words: Rumen bacteria, chemical composition, probiotic, amino acid


2016 ◽  
Vol 16 (3) ◽  
pp. 141-146
Author(s):  
Daria Mimier ◽  
Janusz Żbikowski

Abstract The main objective of this study was to characterize the muddy bottom sediments of three hydrologically different old river beds of the lower Vistula, located in the vicinity of Toruń: Port Drzewny, Martwa Wisła and Przybysz. Samples were taken at monthly intervals from April to November 2015 from two (Martwa Wisła and Przybysz) or three sampling sites (Port Drzewny) located in the central parts of the reservoirs. The bottom sediments of these water bodies were characterized by a low water content and organic matter content expressed as a percentage of dry weight, high organic matter content expressed in units of weight, as well as a high sediment oxygen demand. The most distinct reservoir was Martwa Wisła, most likely due to the lack of a connection with the River Vistula.


2021 ◽  
Vol 12 (5) ◽  
pp. 6608-6617

The study explored the merit of chemically enhanced biodegradation of high organic matter as a sustainable treatment scheme for industrial wastewaters. For this purpose, an integrated, chemically enhanced activated sludge configuration was tested for confectionary effluents with a COD level of around 10.000 mg L-1. In this configuration, chemical settling acted as a polishing step, which removed 50% of the total COD load, including 10% of colloidal COD in the soluble COD range. The sequential batch reactor, selected as the final biological treatment step, was able to remove the remaining biodegradable COD completely. The study primarily demonstrated the merit of in-plant pollution footprint assessment and wastewater characterization with significant COD fractions as necessary prerequisites for the management and final biodegradation of industrial wastewaters with high organic matter content.


Author(s):  
O. A. Lipatnikova

The study of heavy metal speciation in bottom sediments of the Vyshnevolotsky water reservoir is presented in this paper. Sequential selective procedure was used to determine the heavy metal speciation in bottom sediments and thermodynamic calculation — to determine ones in interstitial water. It has been shown that Mn are mainly presented in exchangeable and carbonate forms; for Fe, Zn, Pb и Co the forms are related to iron and manganese hydroxides is played an important role; and Cu and Ni are mainly associated with organic matter. In interstitial waters the main forms of heavy metal speciation are free ions for Zn, Ni, Co and Cd, carbonate complexes for Pb, fulvate complexes for Cu. Effects of particle size and organic matter content in sediments on distribution of mobile and potentially mobile forms of toxic elements have been revealed.


Sign in / Sign up

Export Citation Format

Share Document