scholarly journals Extracellular polymeric substance production in high rate algal oxidation ponds

2017 ◽  
Vol 76 (10) ◽  
pp. 2647-2654 ◽  
Author(s):  
Taobat A. Jimoh ◽  
A. Keith Cowan
Keyword(s):  
Biochemical Analysis ◽  
Suspended Solids ◽  
Extracellular Polymeric Substances ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
High Rate ◽  
Heterotrophic Metabolism ◽  
Partial Characterisation ◽  
Ft Ir ◽  
Oxidation Ponds

Abstract Integrated algal pond systems (IAPSs) combine anaerobic and aerobic bioprocesses to affect sewage treatment. The present work describes the isolation and partial characterisation of soluble extracellular polymeric substances (EPSs) associated with microalgal bacterial flocs (MaB-flocs) generated in high rate algal oxidation ponds (HRAOPs) of an IAPS treating domestic sewage. Productivity and change in MaB-flocs concentration, measured as mixed liquor suspended solids (MLSS) between morning (MLSSAM) and evening (MLSSPM) were monitored and the substructure of the MaB-flocs matrix examined by biochemical analysis and Fourier transform infrared spectroscopy (FT-IR). Results show that MaB-flocs from HRAOPs are assemblages of microorganisms produced as discrete aggregates as a result of microbial EPS production. Formation and accumulation of the EPS was stimulated by light. Analysis by FT-IR revealed characteristic carbohydrate enrichment of these polymeric substances. In contrast, FT-IR spectra of EPSs from dark-incubated MaB-flocs confirmed that these polymers contained increased aliphatic and aromatic functionalities relative to carbohydrates. These differences, it was concluded, were due to dark-induced transition from phototrophic to heterotrophic metabolism. The results negate microalgal cell death as a contributor to elevated chemical oxygen demand of IAPS treated water.

scholarly journals Influence of Pre-Hydrolysis on Sewage Treatment in an Up-Flow Anaerobic Sludge BLANKET (UASB) Reactor: A Review

Water ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 372 ◽  
Author(s):  
Rajinikanth Rajagopal ◽  
Mahbuboor Choudhury ◽  
Nawrin Anwar ◽  
Bernard Goyette ◽  
Md. Rahaman
Keyword(s):  
Suspended Solids ◽  
Biogas Production ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
High Rate ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Two Phase ◽  
Anaerobic Sludge Blanket

The up-flow anaerobic sludge blanket (UASB) process has emerged as a promising high-rate anaerobic digestion technology for the treatment of low- to high-strength soluble and complex wastewaters. Sewage, a complex wastewater, contains 30–70% particulate chemical oxygen demand (CODP). These particulate organics degrade at a slower rate than the soluble organics found in sewage. Accumulation of non-degraded suspended solids can lead to a reduction of active biomass in the reactor and hence a deterioration in its performance in terms of acid accumulation and poor biogas production. Hydrolysis of the CODP in sewage prior to UASB reactor will ensure an increased organic loading rate and better UASB performance. While single-stage UASB reactors have been studied extensively, the two-phase full-scale treatment approach (i.e., a hydrolysis unit followed by an UASB reactor) has still not yet been commercialized worldwide. The concept of treating sewage containing particulate organics via a two-phase approach involves first hydrolyzing and acidifying the volatile suspended solids without losing carbon (as methane) in the first reactor and then treating the soluble sewage in the UASB reactor. This work reviews the available literature to outline critical findings related to the treatment of sewage with and without hydrolysis before the UASB reactor.

scholarly journals Shewhart's control charts and process capability ratio applied to a sewage treatment station

2014 ◽  
Vol 34 (4) ◽  
pp. 770-779 ◽  
Author(s):  
Fábio Orssatto ◽  
Marcio A. Vilas Boas ◽  
Ricardo Nagamine ◽  
Miguel A. Uribe-Opazo
Keyword(s):  
Control Charts ◽  
Suspended Solids ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Process Capability ◽  
Total Suspended Solids ◽  
Statistical Control ◽  
Environmental Legislation ◽  
Shewhart Control Charts ◽  
Shewhart Control

The current study used statistical methods of quality control to evaluate the performance of a sewage treatment station. The concerned station is located in Cascavel city, Paraná State. The evaluated parameters were hydrogenionic potential, settleable solids, total suspended solids, chemical oxygen demand and biochemical oxygen demand in five days. Statistical analysis was performed through Shewhart control charts and process capability ratio. According to Shewhart charts, only the BOD(5.20) variable was under statistical control. Through capability ratios, we observed that except for pH the sewage treatment station is not capable to produce effluents under characteristics that fulfill specifications or standard launching required by environmental legislation.

Modeling of organic substrate transformation in the high-rate activated sludge process

2015 ◽  
Vol 71 (7) ◽  
pp. 971-979 ◽  
Author(s):  
Thomas Nogaj ◽  
Andrew Randall ◽  
Jose Jimenez ◽  
Imre Takacs ◽  
Charles Bott ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Extracellular Polymeric Substances ◽  
Oxygen Demand ◽  
Organic Substrate ◽  
High Rate ◽  
State Variables ◽  
Modified Model ◽  
Soluble Substrate ◽  
Substrate Model ◽  
Dual Substrate

This study describes the development of a modified activated sludge model No.1 framework to describe the organic substrate transformation in the high-rate activated sludge (HRAS) process. New process mechanisms for dual soluble substrate utilization, production of extracellular polymeric substances (EPS), absorption of soluble substrate (storage), and adsorption of colloidal substrate were included in the modified model. Data from two HRAS pilot plants were investigated to calibrate and to validate the proposed model for HRAS systems. A subdivision of readily biodegradable soluble substrate into a slow and fast fraction were included to allow accurate description of effluent soluble chemical oxygen demand (COD) in HRAS versus longer solids retention time (SRT) systems. The modified model incorporates production of EPS and storage polymers as part of the aerobic growth transformation process on the soluble substrate and transformation processes for flocculation of colloidal COD to particulate COD. The adsorbed organics are then converted through hydrolysis to the slowly biodegradable soluble fraction. Two soluble substrate models were evaluated during this study, i.e., the dual substrate and the diauxic models. Both models used two state variables for biodegradable soluble substrate (SBf and SBs) and a single biomass population. The A-stage pilot typically removed 63% of the soluble substrate (SB) at an SRT <0.13 d and 79% at SRT of 0.23 d. In comparison, the dual substrate model predicted 58% removal at the lower SRT and 78% at the higher SRT, with the diauxic model predicting 32% and 70% removals, respectively. Overall, the dual substrate model provided better results than the diauxic model and therefore it was adopted during this study. The dual substrate model successfully described the higher effluent soluble COD observed in the HRAS systems due to the partial removal of SBs, which is almost completely removed in higher SRT systems.

scholarly journals Performance evaluation and upgrade options for existing sequencing batch reactor for nutrient removal

2019 ◽  
Vol 268 ◽  
pp. 06007
Author(s):  
Jahziel Lantin ◽  
Jeremy Ynnos Abenoja ◽  
Jason Ly ◽  
Cheenee Marie Castillones ◽  
Arnel Beltran ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
Membrane Bioreactor ◽  
Suspended Solids ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Treatment Facility ◽  
Study Results ◽  
Hierarchy Process

Assessment and upgrade of existing sewage treatment plants (STPs) are necessary due to the revision of the existing effluent regulations which now monitors nutrients including ammonia, nitrate and phosphates. The aim of this study is the performance evaluation of four sequencing batch reactor (SBR) type of STP based on the following parameters: biological oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS), nitrates, ammonia, phosphates and pH; and their potential upgrade based on the revised regulations stated in DAO 2016-08. Four sequencing batch reactor (SBR) type of STP were assessed for 12 weeks for this study. Results showed noncompliance with nutrient levels, thus upgrade is necessary. Analytical Hierarchy Process (AHP), a Multi-Criteria-Analysis (MCA) tool, was used to select the best option for upgrade among options that include (1) additional SBR tank, (2) diverting wastewater to another treatment facility, and (3) converting the SBR into membrane bioreactor (MBR). Considering the criterion for upgrade, option 2 was the most preferred decision followed by option 1 then option 3.

The Effects of Aluminum Sludge From Water Purification on Municipal Primary Sewage Treatment

1973 ◽  
Vol 8 (1) ◽  
pp. 122-147
Author(s):  
J. D. O’Blenis ◽  
T.R. Warriner
Keyword(s):  
Water Purification ◽  
Pilot Plant ◽  
Suspended Solids ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Phosphate Removal ◽  
Plant Performance ◽  
Alum Sludge

Abstract The current widespread practice of disposal of water filtration plant wastes by direct discharge to receiving waters is coming under critical review by regulatory agencies. Among the alternatives for management of these wastes is the possibility of disposal to sanitary sewer systems. Since a recent nation-wide survey had established alum sludge as the most common waste generated by filtration plants, research was initiated to study the effects of water plant alum sludge on primary sewage treatment. A pilot primary sewage treatment plant was constructed and operated with a raw sewage feed of five litres per minute. A laboratory jar test program was conducted to supplement pilot plant operation. Sludges from two different water purification plants were tested along with alum and combinations of alum and water purification plant sludge for their effects on the removal of suspended solids, chemical oxygen demand (COD) and phosphates. The data showed jar testing to be a good indicator of pilot plant performance. Suspended solids, COD and phosphate removal efficiencies were improved by the addition of the sludges. The phosphate removal capacity of water treatment plant alum sludge was approximately the same as that reported for aluminum hydroxide, or about 1/7 to 1/9 of that determined for alum (as Aluminum). Recycling of the sludges improved phosphate removal performance.

A Decade of Change at West-Southwest Sewage Treatment Works, Chicago, Illinois, U.S.A.

1984 ◽  
Vol 16 (12) ◽  
pp. 555-571
Author(s):  
Nicholas J Melas ◽  
Raymond R Rimkus
Keyword(s):  
Suspended Solids ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
The West ◽  
West Side ◽  
Effluent Quality ◽  
Effluent Standards ◽  
Solids Processing

The Metropolitan Sanitary District of Greater Chicago's West-Southwest Sewage Treatment Works consists of the West Side Treatment Works, an Imhoff facility placed in operation in 1930, and the Southwest Sewage Treatment Works, an activated sludge plant placed in operation in 1939. This paper focuses on the decade of “1970's” and examines changes in plant operating procedures along with plant additions and improvements that were implemented in order to meet stringent water quality and effluent standards. The effect of the energy crisis and the measures taken at the West-Southwest Sewage Treatment Works to lessen its impact are reported. Over the study period, very costly and energy intensive solids processing operations were either curtailed or eliminated. New and innovative processes of sludge handling were developed and implemented. The net effect of these changes in solids processing coupled with modifications in the secondary wastewater treatment operations have resulted in a significant improvement in the effluent quality of the plant. In the early seventies, the effluent concentration for suspended solids, biochemical oxygen demand, and ammonia-nitrogen were 30, 23, and 12 mg/l, respectively; the corresponding values for these parameters in 1981 averaged 6, 6, and 1.4 mg/l.

Enhanced nutrient removal in high-rate ponds

1995 ◽  
Vol 31 (12) ◽  
pp. 33-43 ◽  
Author(s):  
Yakup Nurdogan ◽  
William J. Oswald
Keyword(s):  
Simple Procedure ◽  
Phosphorus Uptake ◽  
Oxygen Demand ◽  
Chemical Precipitation ◽  
High Rate ◽  
Ammonium Ion ◽  
Nitrogen And Phosphorus ◽  
Slaked Lime ◽  
Calcium And Magnesium ◽  
Oxidation Ponds

High-rate ponding (HRP) processes have evolved from conventional oxidation ponds and could play an important role in the treatment of organic wastewaters in sunbelt communities requiring tertiary treatment. HRP systems are very efficient in removing biochemical oxygen demand, nitrogen, and phosphorus. Mineralized nitrogen is removed by algal uptake of ammonium ion (NH4+) and out-gassing of ammonia (NH3). High daytime pH generated in the pond due to algal uptake of bicarbonate shifts the equilibrium in favor of NH3. There are also two mechanisms for phosphorus removal in an HRP; algal uptake and chemical precipitation. Phosphorus uptake by algae is lower than nitrogen uptake because the nitrogen content of algae is approximately ten times more than the phosphorus content, which is approximately one percent of the 100 to 300 mg/l algal dry weights in an HRP. If sewage contains 10 mg/l of phosphorus, algal phosphorus uptake would be only 1 to 3 mg/l. Precipitation of phosphates with polyvalent cations such as calcium and magnesium also occurs in a HRP due to the high pH. This precipitation is sometimes called “autoflocculation”, which is often incomplete due to insufficient calcium and magnesium concentrations in the wastewater. In the case of Richmond, California, where the studies were conducted, the sewage has low magnesium and very low calcium concentrations. Enhancement of calcium and magnesium deficient autoflocculation was studied by adding 20 to 80 mg/l of freshly slaked lime to the pond during the continuous paddle wheel mixing. This simple procedure improved phosphorus, nitrogen and algae removal efficiencies to a level greater than 90%.

scholarly journals Biodegradation of Sewage Wastewater Using Autochthonous Bacteria

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Purnima Dhall ◽  
Rita Kumar ◽  
Anil Kumar
Keyword(s):  
Biological Treatment ◽  
Suspended Solids ◽  
Bacillus Pumilus ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Total Suspended Solids ◽  
Inoculum Size ◽  
Sewage Treatment Plants ◽  
Treatment Facilities ◽  
Autochthonous Bacteria

The performance of isolated designed consortia comprisingBacillus pumilus, Brevibacterium sp, and Pseudomonas aeruginosafor the treatment of sewage wastewater in terms of reduction in COD (chemical oxygen demand), BOD (biochemical oxygen demand) MLSS (mixed liquor suspended solids), and TSS (total suspended solids) was studied. Different parameters were optimized (inoculum size, agitation, and temperature) to achieve effective results in less period of time. The results obtained indicated that consortium in the ratio of 1 : 2 (effluent : biomass) at 200 rpm, 35°C is capable of effectively reducing the pollutional load of the sewage wastewaters, in terms of COD, BOD, TSS, and MLSS within the desired discharge limits, that is, 32 mg/L, 8 mg/L, 162 mg/L, and 190 mg/L. The use of such specific consortia can overcome the inefficiencies of the conventional biological treatment facilities currently operational in sewage treatment plants.

Evaluation of sludge properties in a pilot-scale UASB reactor for sewage treatment in a temperate region

2011 ◽  
Vol 64 (10) ◽  
pp. 1959-1966 ◽  
Author(s):  
K. Syutsubo ◽  
W. Yoochatchaval ◽  
I. Tsushima ◽  
N. Araki ◽  
K. Kubota ◽  
...  
Keyword(s):  
Suspended Solids ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Methanogenic Activity ◽  
Working Volume ◽  
Anaerobic Sludge Blanket

In this study, continuous operation of a pilot-scale upflow anaerobic sludge blanket (UASB) reactor for sewage treatment was conducted for 630 days to investigate the physical and microbial characteristics of the retained sludge. The UASB reactor with a working volume of 20.2 m3 was operated at ambient temperature (16–29 °C) and seeded with digested sludge. After 180 days of operation, when the sewage temperature had dropped to 20 °C or lower, the removal efficiency of both total suspended solids (TSS) and total biochemical oxygen demand (BOD) deteriorated due to washout of retained sludge. At low temperature, the cellulose concentration of the UASB sludge increased owing to the rate limitation of the hydrolytic reaction of suspended solids in the sewage. However, after an improvement in sludge retention (settleability and concentration) in the UASB reactor, the process performance stabilized and gave sufficient results (68% of TSS removal, 75% of total BOD removal) at an hydraulic retention time (HRT) of 9.7 h. The methanogenic activity of the retained sludge significantly increased after day 246 due to the accumulation of Methanosaeta and Methanobacterium following the improvement in sludge retention in the UASB reactor. Acid-forming bacteria from phylum Bacteroidetes were detected at high frequency; thus, these bacteria may have an important role in suspended solids degradation.

scholarly journals Enhancement of Nutrient Removal in a Hybrid Constructed Wetland Utilizing an Electric Fan Air Blower with Renewable Energy of Solar and Wind Power

2015 ◽  
Vol 2015 ◽  
pp. 1-8
Author(s):  
Dong Jin Lee ◽  
Se Won Kang ◽  
Jong Hwan Park ◽  
Seong Heon Kim ◽  
Ik Won Choi ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Wind Power ◽  
Natural Ventilation ◽  
Suspended Solids ◽  
Ventilation System ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Treatment Efficiency ◽  
Air Blower ◽  
Removal Efficiencies

The sewage treatment efficiency of hybrid constructed wetlands (CWs) was evaluated under different ventilation methods. The removal efficiencies of biochemical oxygen demand (BOD), total nitrogen (TN), and total phosphorus (TP) in the vertical flow- (VF-) horizontal flow (HF) CWs using an electric fan air blower by the renewable energy of solar and wind power were higher than those by natural ventilation, excluding only suspended solids (SS). The TN treatment efficiency in the CW using the air blower especially increased rapidly by 16.6% in comparison with the CW employing natural ventilation, since the VF bed provided suitable conditions (aerobic) for nitrification to occur. The average removal efficiencies of BOD, SS, TN, and TP in the effluent were 98.8, 97.4, 58.0, and 48.3% in the CW using an electric fan air blower, respectively. The treatment performance of the CWs under different ventilation methods was assessed, showing TN in the CW using an electric fan air blower to be reduced by 57.5~58.6% for inlet TN loading, whereas reduction by 19.0~53.3% was observed in the CW with natural ventilation. Therefore, to increase the removal of nutrients in CWs, an improved ventilation system, providing ventilation via an electric fan air blower with the renewable energy, is recommended.

Sign in / Sign up

Export Citation Format

Share Document