Lactoferrin in Bone Tissue Regeneration

2020 ◽  
Vol 27 (6) ◽  
pp. 838-853 ◽  
Author(s):  
Madalina Icriverzi ◽  
Valentina Dinca ◽  
Magdalena Moisei ◽  
Robert W. Evans ◽  
Mihaela Trif ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Cells ◽  
Bone Diseases ◽  
Biologically Active Compounds ◽  
Biologically Active ◽  
Bone Tissue Regeneration ◽  
Bone Homeostasis ◽  
Active Compounds

: Among the multiple properties exhibited by lactoferrin (Lf), its involvement in bone regeneration processes is of great interest at the present time. A series of in vitro and in vivo studies have revealed the ability of Lf to promote survival, proliferation and differentiation of osteoblast cells and to inhibit bone resorption mediated by osteoclasts. Although the mechanism underlying the action of Lf in bone cells is still not fully elucidated, it has been shown that its mode of action leading to the survival of osteoblasts is complemented by its mitogenic effect. Activation of several signalling pathways and gene expression, in an LRPdependent or independent manner, has been identified. Unlike the effects on osteoblasts, the action on osteoclasts is different, with Lf leading to a total arrest of osteoclastogenesis. : Due to the positive effect of Lf on osteoblasts, the potential use of Lf alone or in combination with different biologically active compounds in bone tissue regeneration and the treatment of bone diseases is of great interest. Since the bioavailability of Lf in vivo is poor, a nanotechnology- based strategy to improve the biological properties of Lf was developed. The investigated formulations include incorporation of Lf into collagen membranes, gelatin hydrogel, liposomes, loading onto nanofibers, porous microspheres, or coating onto silica/titan based implants. Lf has also been coupled with other biologically active compounds such as biomimetic hydroxyapatite, in order to improve the efficacy of biomaterials used in the regulation of bone homeostasis. : This review aims to provide an up-to-date review of research on the involvement of Lf in bone growth and healing and on its use as a potential therapeutic factor in bone tissue regeneration.

scholarly journals Conducting PEEK Nanocomposites with Electrophoretically Deposited Bioactive Coating for Bone Tissue Regeneration and Multi-Modal Therapeutic Applications

2020 ◽  
Author(s):  
Miaomiao He ◽  
Ce zhu ◽  
Huan Xu ◽  
dan Sun ◽  
Chen Chen ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Repair ◽  
Graphene Nanosheets ◽  
Biomechanical Properties ◽  
Bone Diseases ◽  
Bone Tissue Regeneration ◽  
Order Of Magnitude

The use of polyetheretherketone (PEEK) has grown exponentially in the biomedical field in recent decades due to its outstanding biomechanical properties. However, its lack of bioactivity/osteointegration remains an unresolved issue towards its wide use in orthopedic applications. In this work, graphene nanosheets have been incorporated into PEEK to obtain multifunctional nanocomposites. Due to the formation of electrical percolation network and the π-π* conjugation between graphene and PEEK, the resulting composites have achieved twelve order of magnitude enhancement in its electrical conductivity, and have enabled electrophoretic deposition of bioactive/anti-bacterial coating consisting of stearyltrimethylammonium chloride (STAC) modified hydroxyapatite (HA). The coated composite implant showed significant boosting of BMSC cell proliferation in vitro. In addition, the strong photothermal conversion effect of the graphene nanofillers have enabled laser induced heating of our nanocomposite implants, where the temperature of the implant can reach 45 oC in 150 s. The unique multi-functionality of our composite implant has also been demonstrated for photothermal applications such as enhancing bacterial (E. coli and S. aureus) eradication and tumor cell (MG63) inhibition, as well as bone tissue regeneration in vivo. The results suggest the strong potential of our multi-functional implant in bone repair applications as well as multi-modal therapy of challenging bone diseases such as osteosarcoma and osteomyelitis

Injectable Organic-Inorganic Biocomposites for Bone Tissue Regeneration - A Mini Review

2021 ◽  
Vol 903 ◽  
pp. 52-59
Author(s):  
Inta Kreicberga ◽  
Kristine Salma-Ancane
Keyword(s):  
Bone Regeneration ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Diseases ◽  
Biologically Active ◽  
Bone Tissue Regeneration ◽  
Osteoporotic Bone ◽  
Synthesis Methods ◽  
Active Components ◽  
Large Bone

Bone regeneration is complex physiological process, which include the most common form of regeneration - bone fracture healing and new bone formation. Moreover, large bone defects, infections and bone diseases such as osteoporosis and arthritis can impair bone regeneration. Despite intensive research and development of biomaterials for bone tissue engineering, especially for osteoporotic bone healing, the properties of the fabricated biomaterials are still far from those of unique composite structure of natural bone and desired therapeutic effect not achieved. This mini-review will highlight the various cutting-edge injectable inorganic-organic biocomposites as minimally invasive and regenerative therapeutics for bone tissue regeneration. The review will summarize the main strategic tools for the development of injectable biocomposites: natural or synthetic biopolymer-based hydrogels, bioactive inorganic fillers and biologically active components, as well as the fabrication techniques and synthesis methods.

scholarly journals Conducting PEEK Nanocomposites with Electrophoretically Deposited Bioactive Coating for Bone Tissue Regeneration and Multi-Modal Therapeutic Applications

2020 ◽  
Author(s):  
Miaomiao He ◽  
Ce zhu ◽  
Huan Xu ◽  
dan Sun ◽  
Chen Chen ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Repair ◽  
Graphene Nanosheets ◽  
Biomechanical Properties ◽  
Bone Diseases ◽  
Bone Tissue Regeneration ◽  
Order Of Magnitude

The use of polyetheretherketone (PEEK) has grown exponentially in the biomedical field in recent decades due to its outstanding biomechanical properties. However, its lack of bioactivity/osteointegration remains an unresolved issue towards its wide use in orthopedic applications. In this work, graphene nanosheets have been incorporated into PEEK to obtain multifunctional nanocomposites. Due to the formation of electrical percolation network and the π-π* conjugation between graphene and PEEK, the resulting composites have achieved twelve order of magnitude enhancement in its electrical conductivity, and have enabled electrophoretic deposition of bioactive/anti-bacterial coating consisting of stearyltrimethylammonium chloride (STAC) modified hydroxyapatite (HA). The coated composite implant showed significant boosting of BMSC cell proliferation in vitro. In addition, the strong photothermal conversion effect of the graphene nanofillers have enabled laser induced heating of our nanocomposite implants, where the temperature of the implant can reach 45 oC in 150 s. The unique multi-functionality of our composite implant has also been demonstrated for photothermal applications such as enhancing bacterial (E. coli and S. aureus) eradication and tumor cell (MG63) inhibition, as well as bone tissue regeneration in vivo. The results suggest the strong potential of our multi-functional implant in bone repair applications as well as multi-modal therapy of challenging bone diseases such as osteosarcoma and osteomyelitis

scholarly journals Nanoscale Strontium-Substituted Hydroxyapatite Pastes and Gels for Bone Tissue Regeneration

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1611
Author(s):  
Caroline J. Harrison ◽  
Paul V. Hatton ◽  
Piergiorgio Gentile ◽  
Cheryl A. Miller
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Culture Media ◽  
Full Range ◽  
Sol Gel ◽  
Tissue Growth ◽  
Bone Tissue Regeneration ◽  
Tissue Culture Media ◽  
Bone Deposition

Injectable nanoscale hydroxyapatite (nHA) systems are highly promising biomaterials to address clinical needs in bone tissue regeneration, due to their excellent biocompatibility, bioinspired nature, and ability to be delivered in a minimally invasive manner. Bulk strontium-substituted hydroxyapatite (SrHA) is reported to encourage bone tissue growth by stimulating bone deposition and reducing bone resorption, but there are no detailed reports describing the preparation of a systematic substitution up to 100% at the nanoscale. The aim of this work was therefore to fabricate systematic series (0–100 atomic% Sr) of SrHA pastes and gels using two different rapid-mixing methodological approaches, wet precipitation and sol-gel. The full range of nanoscale SrHA materials were successfully prepared using both methods, with a measured substitution very close to the calculated amounts. As anticipated, the SrHA samples showed increased radiopacity, a beneficial property to aid in vivo or clinical monitoring of the material in situ over time. For indirect methods, the greatest cell viabilities were observed for the 100% substituted SrHA paste and gel, while direct viability results were most likely influenced by material disaggregation in the tissue culture media. It was concluded that nanoscale SrHAs were superior biomaterials for applications in bone surgery, due to increased radiopacity and improved biocompatibility.

scholarly journals Structure and functionalization of mesoporous bioceramics for bone tissue regeneration and local drug delivery

2012 ◽  
Vol 370 (1963) ◽  
pp. 1400-1421 ◽  
Author(s):  
María Vallet-Regí ◽  
Isabel Izquierdo-Barba ◽  
Montserrat Colilla
Keyword(s):  
Drug Delivery ◽  
Mesoporous Silica ◽  
Bone Tissue ◽  
Tissue Regeneration ◽  
Bone Cells ◽  
Added Value ◽  
Bone Tissue Regeneration ◽  
Local Drug Delivery ◽  
Chemical Compositions ◽  
Sustained Drug Release

This review article describes the importance of structure and functionalization in the performance of mesoporous silica bioceramics for bone tissue regeneration and local drug delivery purposes. Herein, we summarize the pivotal features of mesoporous bioactive glasses, also known as ‘templated glasses’ (TGs), which present chemical compositions similar to those of conventional bioactive sol–gel glasses and the added value of an ordered mesopore arrangement. An in-depth study concerning the possibility of tailoring the structural and textural characteristics of TGs at the nanometric scale and their influence on bioactive behaviour is discussed. The highly ordered mesoporous arrangement of cavities allows these materials to confine drugs to be subsequently released, acting as drug delivery devices. The functionalization of mesoporous silica walls has been revealed as the cornerstone in the performance of these materials as controlled release systems. The synergy between the improved bioactive behaviour and local sustained drug release capability of mesostructured materials makes them suitable to manufacture three-dimensional macroporous scaffolds for bone tissue engineering. Finally, this review tackles the possibility of covalently grafting different osteoinductive agents to the scaffold surface that act as attracting signals for bone cells to promote the bone regeneration process.

scholarly journals Protocol of Co-Culture of Human Osteoblasts and Osteoclasts to Test Biomaterials for Bone Tissue Engineering

2022 ◽  
Vol 5 (1) ◽  
pp. 8
Author(s):  
Giorgia Borciani ◽  
Giorgia Montalbano ◽  
Nicola Baldini ◽  
Chiara Vitale-Brovarone ◽  
Gabriela Ciapetti
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Cells ◽  
Bone Cell ◽  
Seeding Density ◽  
Bone Homeostasis ◽  
Bone Microenvironment

New biomaterials and scaffolds for bone tissue engineering (BTE) applications require to be tested in a bone microenvironment reliable model. On this assumption, the in vitro laboratory protocols with bone cells represent worthy experimental systems improving our knowledge about bone homeostasis, reducing the costs of experimentation. To this day, several models of the bone microenvironment are reported in the literature, but few delineate a protocol for testing new biomaterials using bone cells. Herein we propose a clear protocol to set up an indirect co-culture system of human-derived osteoblasts and osteoclast precursors, providing well-defined criteria such as the cell seeding density, cell:cell ratio, the culture medium, and the proofs of differentiation. The material to be tested may be easily introduced in the system and the cell response analyzed. The physical separation of osteoblasts and osteoclasts allows distinguishing the effects of the material onto the two cell types and to evaluate the correlation between material and cell behavior, cell morphology, and adhesion. The whole protocol requires about 4 to 6 weeks with an intermediate level of expertise. The system is an in vitro model of the bone remodeling system useful in testing innovative materials for bone regeneration, and potentially exploitable in different application fields. The use of human primary cells represents a close replica of the bone cell cooperation in vivo and may be employed as a feasible system to test materials and scaffolds for bone substitution and regeneration.

DEVELOPMENT AND IN VIVO EVALUATION OF COMPLEXES OF BIOLOGICALLY ACTIVE COMPOUNDS WITH BIOPOLYMER MATRICES

2021 ◽  
Author(s):  
Nikita Aleksandrovich Petrov ◽  
◽  
Yuliya Sergeevna Sidorova ◽  
Alla Alekseevna Kochetkova ◽  
Vladimir Kimovich Mazo ◽  
...  
Keyword(s):  
Egg White ◽  
Biologically Active Compounds ◽  
Biologically Active ◽  
In Vivo Evaluation ◽  
Active Compounds ◽  
Food Ingredients ◽  
Chicken Egg ◽  
Buckwheat Flour

The paper presents the results of a preclinical assessment of the effectiveness of food ingredients: a concentrate of blueberry leaf polyphenols sorbed on buckwheat flour, and a concentrate of phytoecdysteroid 20-hydroxyecdysone and quinoa grain flavonoids sorbed on chicken egg white.

scholarly journals Surface-Modified Poly(l-lactide-co-glycolide) Scaffolds for the Treatment of Osteochondral Critical Size Defects—In Vivo Studies on Rabbits

2020 ◽  
Vol 21 (20) ◽  
pp. 7541
Author(s):  
Małgorzata Krok-Borkowicz ◽  
Katarzyna Reczyńska ◽  
Łucja Rumian ◽  
Elżbieta Menaszek ◽  
Maciej Orzelski ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Tissue Regeneration ◽  
Photoelectron Spectroscopy ◽  
Sessile Drop ◽  
Bone Tissue Regeneration ◽  
In Vivo Studies ◽  
In Vivo Model ◽  
Type I ◽  
X Ray

Poly(l-lactide-co-glycolide) (PLGA) porous scaffolds were modified with collagen type I (PLGA/coll) or hydroxyapatite (PLGA/HAp) and implanted in rabbits osteochondral defects to check their biocompatibility and bone tissue regeneration potential. The scaffolds were fabricated using solvent casting/particulate leaching method. Their total porosity was 85% and the pore size was in the range of 250–320 µm. The physico-chemical properties of the scaffolds were evaluated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), sessile drop, and compression tests. Three types of the scaffolds (unmodified PLGA, PLGA/coll, and PLGA/HAp) were implanted into the defects created in New Zealand rabbit femoral trochlears; empty defect acted as control. Samples were extracted after 1, 4, 12, and 26 weeks from the implantation, evaluated using micro-computed tomography (µCT), and stained by Masson–Goldner and hematoxylin-eosin. The results showed that the proposed method is suitable for fabrication of highly porous PLGA scaffolds. Effective deposition of both coll and HAp was confirmed on all surfaces of the pores through the entire scaffold volume. In the in vivo model, PLGA and PLGA/HAp scaffolds enhanced tissue ingrowth as shown by histological and morphometric analyses. Bone formation was the highest for PLGA/HAp scaffolds as evidenced by µCT. Neo-tissue formation in the defect site was well correlated with degradation kinetics of the scaffold material. Interestingly, around PLGA/coll extensive inflammation and inhibited tissue healing were detected, presumably due to immunological response of the host towards collagen of bovine origin. To summarize, PLGA scaffolds modified with HAp are the most promising materials for bone tissue regeneration.

Sign in / Sign up

Export Citation Format

Share Document