scholarly journals Cloud cavitation dynamics

2009 ◽  
Vol 50 ◽  
Author(s):  
John R Blake ◽  
Miles Wilson ◽  
Peter M Haese
Keyword(s):  
Cloud Cavitation

scholarly journals Comparative Study of Different Turbulence Models for Cavitational Flows around NACA0012 Hydrofoil

2021 ◽  
Vol 9 (7) ◽  
pp. 742
Author(s):  
Minsheng Zhao ◽  
Decheng Wan ◽  
Yangyang Gao
Keyword(s):  
Angle Of Attack ◽  
Large Angle ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Specific Information ◽  
Cloud Cavitation ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Shedding Frequency ◽  
Reynolds Average

The present work focuses on the comparison of the numerical simulation of sheet/cloud cavitation with the Reynolds Average Navier-Stokes and Large Eddy Simulation(RANS and LES) methods around NACA0012 hydrofoil in water flow. Three kinds of turbulence models—SST k-ω, modified SST k-ω, and Smagorinsky’s model—were used in this paper. The unstable sheet cavity and periodic shedding of the sheet/cloud cavitation were predicted, and the simulation results, namelycavitation shape, shedding frequency, and the lift and the drag coefficients of those three turbulence models, were analyzed and compared with each other. The numerical results above were basically in accordance with experimental ones. It was found that the modified SST k-ω and Smagorinsky turbulence models performed better in the aspects of cavitation shape, shedding frequency, and capturing the unsteady cavitation vortex cluster in the developing and shedding period of the cavitation at the cavitation number σ = 0.8. At a small angle of attack, the modified SST k-ω model was more accurate and practical than the other two models. However, at a large angle of attack, the Smagorinsky model of the LES method was able to give specific information in the cavitation flow field, which RANS method could not give. Further study showed that the vortex structure of the wing is the main cause of cavitation shedding.

Transcritical Patterns of Cavitating Flow and Trends of Acoustic Level

2001 ◽  
Vol 123 (4) ◽  
pp. 850-856 ◽  
Author(s):  
Wei Gu ◽  
Yousheng He ◽  
Tianqun Hu
Keyword(s):  
Liquid Flow ◽  
High Speed ◽  
Cavity Flow ◽  
Periodic Flow ◽  
Cavitating Flows ◽  
Cavitation Noise ◽  
Cloud Cavitation ◽  
Three Stages ◽  
Cavity Shedding ◽  
Axisymmetric Bodies

Hydroacoustics of the transcritical cavitating flows on a NACA16012 hydrofoil at a 2/5/8-degree angle of attack and axisymmetric bodies with hemispherical and 45-degree conical headforms were studied, and the process of cloud cavitation shedding was observed by means of high-speed cinegraphy. By expressing the cavitation noise with partial acoustic level, it is found that the development of cavitation noise varies correspondingly with cavitation patterns. The instability of cavitation is a result of cavity-flow interaction, and is mainly affected by the liquid flow rather than by the cavitation bubbles. A periodic flow structure with a large cavitation vortex is observed and found to be responsible for inducing the reentrant-jet and consequent cavitation shedding, and explains the mechanism of periodic cavitation shedding from a new viewpoint. New terms for the three stages, growing, hatching and breaking, are used to describe the process of cavity shedding.

Cavitation Experiments on Turbopump Inducers and Hydrofoils at Alta/Centrospazio: Overview and Future Activities

2005 ◽  
Author(s):  
Angelo Cervone ◽  
Cristina Bramanti ◽  
Emilio Rapposelli ◽  
Luca d’Agostino
Keyword(s):  
Thermal Effects ◽  
Cavity Length ◽  
Rocket Engine ◽  
Pressure Coefficient ◽  
Suction Side ◽  
Test Facility ◽  
Final Part ◽  
Cloud Cavitation ◽  
Naca 0015

The aim of the present paper is to provide some highlights about the most interesting experimental activities carried out during the years 2000–2004 through the CPRTF (Cavitating Pump Rotordynamic Test Facility) at Centrospazio/Alta S.p.A. After a brief description of the facility, the experimental activities carried out on a NACA 0015 hydrofoil for the characterization of the pressure coefficient on the suction side and evaluation the cavity length and oscillations are presented. Then, the results obtained to characterize the performance and the cavitation instabilities on three different axial inducers are showed: in particular, a commercial three-bladed inducer, the four-bladed inducer installed in the LOX turbopump of the Ariane Vulcain MK1 rocket engine and the “FAST2”, a two-bladed one manufactured by Avio S.p.A. using the criteria followed for the VINCI180 LOX inducer. The most interesting results are related to the effects of the temperature on the cavitation instabilities on hydrofoils and inducers. Experiments showed that some instabilities, like the cloud cavitation on hydrofoils and the surge on inducers, are strongly affected by the temperature, while others seem not to be influenced by the thermal effects. In the final part of this paper, some indications of the main experimental activities scheduled for the next future are provided.

A New Cavitation-Induced-Momentum-Defect (CIMD) Correction Approach to Track Cavitation Events

2007 ◽  
Author(s):  
Vedanth Srinivasan ◽  
Abraham J. Salazar ◽  
Kozo Saito
Keyword(s):  
Liquid Phase ◽  
Transport Equation ◽  
Vapor Phase ◽  
Incompressible Flows ◽  
Vapor Transport ◽  
Source Terms ◽  
Local Pressure ◽  
Cloud Cavitation ◽  
Tracking Model ◽  
The Impact

A new unsteady cavitation event tracking model is developed for predicting vapor dynamics occurring in multi-dimensional incompressible flows. The procedure solves incompressible Navier-Stokes equations for the liquid phase with an additional vapor transport equation for the vapor phase. The model tracks regions of liquid vaporization and applies compressibility effects to compute the local variation in speed of sound using the Homogeneous Equilibrium Model (HEM) assumptions. The variation of local cell density as a function of local pressure is used to construct the source term in the vapor fraction transport equation. The novel Cavitation-Induced-Momentum-Defect (CIMD) correction methodology developed in this study serves to account for cavitation inception and collapse events as relevant momentum source terms in the liquid phase momentum equations. Effects of vapor phase accumulation and diffusion are incorporated by detailed relaxation models. A modified RNG K-ε model, including the effects of compressibility in the vapor regions, is employed for modeling turbulence effects. Turbulent kinetic energy and dissipation contributions from the vapor regions are integrated with the liquid phase turbulence using relevant source terms. Numerical simulations are carried out using a Finite Volume methodology available within the framework of commercial CFD software code Fluent v.6.2. Simulation results are in qualitative agreement with experiments for unsteady cloud cavitation behavior in planar nozzle flows. Multitude of mechanisms such as formation of vortex cavities, vapor cluster shedding and coalescence, cavity pinch off are sharply captured by the supplemented vapor transport equation. Our results concur with previously established theories concerning sheet and cloud cavitation such as the re-entrant jet motion, cavity closure and the impact of adverse pressure gradients on cavitation dynamics.

Modeling of unsteady structure of sheet/cloud cavitation around a two-dimensional stationary hydrofoil

2015 ◽  
Vol 231 (3) ◽  
pp. 455-469 ◽  
Author(s):  
Feng Hong ◽  
Jianping Yuan ◽  
Banglun Zhou ◽  
Zhong Li
Keyword(s):  
Volume Fraction ◽  
Cavitating Flow ◽  
Wake Flow ◽  
Two Dimensional ◽  
Cavitating Flows ◽  
Cavitation Model ◽  
Ansys Fluent ◽  
Cloud Cavitation ◽  
Lift And Drag ◽  
Multi Phase

Compared to non-cavitating flow, cavitating flow is much complex owing to the numerical difficulties caused by cavity generation and collapse. In the present work, cavitating flow around a two-dimensional Clark-Y hydrofoil is studied numerically with particular emphasis on understanding the cavitation structures and the shedding dynamics. A cavitation model, coupled with the mixture multi-phase approach, and the modified shear stress transport k-ω turbulence model has been developed and implemented in this study to calculate the pressure, velocity, and vapor volume fraction of the hydrofoil. The cavitation model has been implemented in ANSYS FLUENT platform. The hydrofoil has a fixed angle of attack of α = 8° with a Reynolds number of Re = 7.5 × 105. Simulations have been carried out for various cavitation numbers ranging from non-cavitating flows to the cloud cavitation regime. In particular, we compared the lift and drag coefficients, the cavitation dynamics, and the time-averaged velocity with available experimental data. The comparisons between the numerical and experimental results show that the present numerical method is capable to predict the formation, breakup, shedding, and collapse of the sheet/cloud cavity. The periodical formation, shedding, and collapse of sheet/cloud cavity lead to substantial increase in turbulent velocity fluctuations in the cavitation regimes around the hydrofoil and in the wake flow.

Wall-Pressure Fluctuations Inside Attached Cavitation

2021 ◽  
Author(s):  
Changchang Wang ◽  
Guoyu Wang ◽  
Mindi Zhang ◽  
Qin Wu
Keyword(s):  
Shock Wave ◽  
Shear Layer ◽  
High Frequency ◽  
Pressure Fluctuations ◽  
Wall Pressure ◽  
Cloud Cavitation ◽  
Unsteady Pressure ◽  
Wall Pressure Fluctuations ◽  
Kurtosis Factor ◽  
Skewness And Kurtosis

Abstract This study experimentally investigates the statistics of wall-pressure fluctuations and their source inside attached cavitation under different cavity regimes. Experiments were conducted in the divergent section of a convergent-divergent channel at a constant Reynolds number of Re = 7.8 × 105 based on throat height, and different cavitation numbers σ = 1.18, 0.92, 0.82 and 0.78. Four high-frequency unsteady pressure transducers were flushed-mounted in the divergent section downstream the throat where cavitation develops to sample the unsteady pressure signals induced by cavity behaviors. Flow visualization and wall-pressure measurement in high frequency on the order of MHz were employed using a synchronizing sampling technique. Results are presented for sheet/cloud cavitating flows. Specifically, sheet cavitation with both inception shear layer and fully cavitated shear layer and cloud cavitation under re-entrant jet dominated shedding and shock wave dominated shedding are studied. Compared with re-entrant jet, the interactions between shock wave and cavity could induce pressure peaks with high magnitude within cavity, which will collapse the local vapor along its propagating path and reduce local void fraction. Furthermore, statistics analysis shows that within the cavity, wall-pressure fluctuations increase with the distance to cavity leading edge increase in the first half of cavity length, and the moments of the probability density distribution skewness and kurtosis factor decrease, indicating the asymmetry and intermittency of wall-pressure fluctuation signals decrease. In shock wave dominated cavity shedding condition, the skewness and kurtosis factor increase. These results can provide data to improve the accuracy of turbulence modeling in numerical simulation of turbulent cavitating flow.

Sign in / Sign up

Export Citation Format

Share Document