A Novel FACTS Based (DDSC) Compensator for Power-Quality Enhancement of L.V. Distribution Feeder with a Dispersed Wind Generator

Author(s):  
Adel M Sharaf ◽  
Khaled Mohamed Abo-Al-Ez

In a deregulated electric service environment, an effective electric transmission and distribution networks are vital to the competitive environment of reliable electric service. Power quality (PQ) is an item of steadily increasing concern in power transmission and distribution. The traditional approach to overcoming capacity and quality limitations in power transmission and distribution in many cases is the addition of new transmission and/or generating capacity. This, however, may not be practicable or desirable in the real case, for many of reasons. From technical, economical and environmental points of view, there are two important - and most of the time combined - alternatives for building new transmission or distribution networks to enhance the transmission system capacity, and power quality: the Flexible alternating current transmission devices and controllers, and the distributed generation resources near the load centers. The connection of distributed generation to the distribution grid may influence the stability of the power system, i.e. angle, frequency and voltage stability. It might also have an impact on the protection selectivity, and the frequency and voltage control in the system. This paper presents a low cost FACTS based Dynamic Distribution System Compensator (DDSC) scheme for voltage stabilization and power transfer and quality enhancement of the distribution feeders connected to a dispersed wind generator, using MATLAB/ SimPower System simulation tool.

Author(s):  
Sri Prakash CH

Effort for power quality enhancement is gradually raised in power transmission and distribution system. In a distribution system, it is a pre-requisite consumer related concern which is addressed by evading the mis-operation of massive power electronic load apparatus. Due to this, voltage/current harmonic distortions are acquired at common coupling point, which influences the disruption of quality power in a distribution system. A reliable and efficient active power conditioner is utilized for acquiring the power quality features in a three phase distribution system with attractive control objective. Over the classical conditioning techniques, a D-STATCOM plays a key role in a distribution system for power quality enhancement. Formal control objectives are adversed with incredible switching losses due to extreme harmonized frequencies in a reference current component. This paper proposes the imperative reference current extraction scheme for optimal functioning of DSTATCOM with reduced switching losses and gaining the incredible efficiency. The validation of DSTATCOM with proposed control strategy under several load situations (linear/non-linear & balanced/un-balanced) is evaluated by using Matlab/Simulink platform and simulation results are conferred.


2018 ◽  
Vol 93 ◽  
pp. 201-214 ◽  
Author(s):  
Yahya Naderi ◽  
Seyed Hossein Hosseini ◽  
Saeid Ghassem Zadeh ◽  
Behnam Mohammadi-Ivatloo ◽  
Juan C. Vasquez ◽  
...  

Author(s):  
Yadiki Rajendra Babu ◽  
C Srinivas Rao

This paper presents the concept of power quality enhancement reducing the harmonic distortion with power distribution system consisting of balanced and unbalanced non-linear type of loads. This paper presents power quality enhancement using dual active power filters (APF’s) under grid connected distributed generation scheme. Acive power filters effectively generate compensating signals for harmonic abolition and this paper presents APF for compensating currents to be induced in to distribution grid for harmonic elimination under balanced and unbalanced non-linear load conditions. Distributed generation (DG) feeds the grid and the scheme of grid interfaced DG was explained. APF is controlled using instantaneous P-Q theory and DG inverter is controlled using simple control strategy. Proposed system was developed and the results are obtained using MATLAB/SIMULINK software.


Author(s):  
Sunny Katyara ◽  
Lukasz Staszewski ◽  
Faheem Akhtar Chachar

Background: Since the distribution networks are passive until Distributed Generation (DG) is not being installed into them, the stability issues occur in the distribution system after the integration of DG. Methods: In order to assure the simplicity during the calculations, many approximations have been proposed for finding the system’s parameters i.e. Voltage, active and reactive powers and load angle, more efficiently and accurately. This research presents an algorithm for finding the Norton’s equivalent model of distribution system with DG, considering from receiving end. Norton’s model of distribution system can be determined either from its complete configuration or through an algorithm using system’s voltage and current profiles. The algorithm involves the determination of derivative of apparent power against the current (dS/dIL) of the system. Results: This work also verifies the accuracy of proposed algorithm according to the relative variations in the phase angle of system’s impedance. This research also considers the varying states of distribution system due to switching in and out of DG and therefore Norton’s model needs to be updated accordingly. Conclusion: The efficacy of the proposed algorithm is verified through MATLAB simulation results under two scenarios, (i) normal condition and (ii) faulty condition. During normal condition, the stability factor near to 1 and change in dS/dIL was near to 0 while during fault condition, the stability factor was higher than 1 and the value of dS/dIL was away from 0.


2021 ◽  
Vol 11 (2) ◽  
pp. 774 ◽  
Author(s):  
Ahmed S. Abbas ◽  
Ragab A. El-Sehiemy ◽  
Adel Abou El-Ela ◽  
Eman Salah Ali ◽  
Karar Mahmoud ◽  
...  

In recent years, with the widespread use of non-linear loads power electronic devices associated with the penetration of various renewable energy sources, the distribution system is highly affected by harmonic distortion caused by these sources. Moreover, the inverter-based distributed generation units (DGs) (e.g., photovoltaic (PV) and wind turbine) that are integrated into the distribution systems, are considered as significant harmonic sources of severe harmful effects on the system power quality. To solve these issues, this paper proposes a harmonic mitigation method for improving the power quality problems in distribution systems. Specifically, the proposed optimal planning of the single tuned harmonic filters (STFs) in the presence of inverter-based DGs is developed by the recent Water Cycle Algorithm (WCA). The objectives of this planning problem aim to minimize the total harmonic distortion (THD), power loss, filter investment cost, and improvement of voltage profile considering different constraints to meet the IEEE 519 standard. Further, the impact of the inverter-based DGs on the system harmonics is studied. Two cases are considered to find the effect of the DGs harmonic spectrum on the system distortion and filter planning. The proposed method is tested on the IEEE 69-bus distribution system. The effectiveness of the proposed planning model is demonstrated where significant reductions in the harmonic distortion are accomplished.


IJOSTHE ◽  
2020 ◽  
Vol 7 (1) ◽  
pp. 5
Author(s):  
Ankeeta . ◽  
Vasant Acharya

Power generation through the renewable energy sources has become more viable and economical than the fossil fuel based power plants. By integrating small scale distributed energy resources, microgrids are being introduced as an alternative approach in generating electrical power at distribution voltage level. The power electronic interface provides the necessary flexibility, security and reliability of operation between micro-sources and the distribution system. The presence of non-linear and the unbalanced loads in the distribution system causes power quality issues in the Microgrid system. This paper explores and reviews different control strategies developed in the literature for the power quality enhancement in microgrids.


Sign in / Sign up

Export Citation Format

Share Document