scholarly journals SOLUBILITY ENHANCEMENT OF GLIBENCLAMIDE USING MESOPOROUS SILICA

2019 ◽  
pp. 302-314
Author(s):  
Swati Mittal ◽  
AKSHAY SONAWANE ◽  
MANGESH KHUNE
Keyword(s):  
Drug Release ◽  
Mesoporous Silica ◽  
Drug Loading ◽  
Immediate Release ◽  
Formulation Development ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Drug Precipitation ◽  
Poorly Soluble

Glibenclamide is a BCS Class II drug and poses a major problem during formulation development. In the present study, adsorption onto various carriers was used to enhance the solubility of glibenclamide. It was observed that solubility of glibenclamide was greatly enhanced by adsorbing onto mesoporous silica. The increase in solubility of poorly soluble drugs is often associated with the generation of supersaturation, which results in the risk of drug precipitation. HPMC E5 was used as precipitation inhibitor to maintain sink condition for a longer duration. A 32 full factorial design was adopted to optimize the ratio of glibenclamide (X1) and mesoporous silica as a carrier (X2) and the effect of different ratios was studied on percent yield, percent drug loading, and percent drug release. X-ray powder diffraction (XRPD) and Differential scanning calorimetry studies were performed to investigate any possible interaction in between glibenclamide and mesoporous silica. An optimum batch of drug adsorbate was used to prepare immediate-release tablets. The tablets prepared were evaluated for thickness, uniformity of weight, hardness, friability, in-vitro disintegration time, and in vitro drug release study.

scholarly journals Design, optimization and evaluation of aceclofenac fast dissolving tablets employing starch glutarate: A new superdisintegrant

2019 ◽  
Vol 9 (2) ◽  
pp. 259-269
Author(s):  
Rada Santosh Kumar ◽  
T. Naga Satya Yagnesh
Keyword(s):  
Amorphous Powder ◽  
Immediate Release ◽  
Order Rate Constant ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Drug Content ◽  
Poorly Soluble ◽  
Dissolution Efficiency

In solid dosage forms, fast dissolving tablets has proven the best way for ease of administration for the pediatrics and geriatric patients. The current study involves in the evaluation of starch glutarate as a superdintegrant in the formulation of fast dissolving tablets of poorly soluble drugs employing 23factorial design. Starch glutarate was synthesized by esterification process. The synthesized starch glutarate was subjected to physical and micromeritic evaluation. To establish as starch glutarate as a superdisintegrant, fast dissolving tablet of aceclofenac was prepared employing starch glutarate in different proportions in each case by direct compression method employing 23 factorial design. All fast dissolving tablets prepared were evaluated for drug content, hardness, friability, disintegration time and other dissolution characteristics like percent dissolved in 5 min (PD5), Dissolution efficiency in 5 min (DE5%) and first order rate constant (K1). The starch glutarate prepared was found to be fine, free flowing amorphous powder. Starch glutarate exhibited good swelling in water. Fourier transform infrared spectra (FTIR) and Differential scanning calorimetry (DSC) study indicated the absence of interaction between aceclofenac and starch glutarate. All the fast dissolving tablets formulated employing starch glutarate were of good quality with regard to drug content (100±5%), hardness (3.6–4 kg/sq. cm), and friability (0.12-0.15%). The optimized formulation F8 has the least disintegration time i.e., 30±0.02s. The in vitro wetting time was less (i.e., 90s) in optimized formulation F8. The cumulative drug dissolved in the optimized formulation F8 was found to be 99.15±0.56% in 15 min. Starch glutarate was found to be a superdisintegrant which enhanced the dissolution efficiency when combined with crospovidone, croscarmellose sodium, with the aceclofenac and hence it could be used in the formulation of fast dissolving tablets to provide immediate release of the contained drug within 15 minutes. Keywords: Fast dissolving, Superdisintegrant, Starch glutarate, Dissolution efficiency.

scholarly journals Design, optimization and evaluation of ibuprofen fast dissolving tablets employing starch tartrate: A new superdisintegrant

2019 ◽  
Vol 9 (2) ◽  
pp. 160-169
Author(s):  
Rada Santosh Kumar ◽  
T. Naga Satya Yagnesh
Keyword(s):  
Immediate Release ◽  
Order Rate Constant ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Drug Content ◽  
Current Scenario ◽  
Poorly Soluble ◽  
Wetting Time ◽  
Dissolution Efficiency

The current scenario deals with the study of fast dissolving tablets for the patients suffering from swallowing, sickness ,etc.  The present investigation involves in the evaluation of starch tartrate as a superdintegrant in the formulation of fast dissolving tablets of poorly soluble drugs employing 23factorial design. Starch tartrate was synthesized by esterification process. The synthesized starch tartrate was subjected to physical and micromeritic evaluation. All fast dissolving tablets were evaluated for drug content, hardness, friability, disintegration time and other dissolution characteristics like percent dissolved in 5 min (PD5), dissolution efficiency in 5 min (DE5%) and first order rate constant(K1). The starch tartrate prepared was found to be fine, free flowing slightly crystalline powder. Starch tartrate exhibited good swelling in water.Fourier transform infrared spectra (FTIR) and Differential scanning calorimetry (DSC) study indicated the absence of interaction between ibuprofen and starch tartrate. All the fast dissolving tablets formulated employing starch tartrate were of good quality with regard to drug content (200±5%), hardness (3.6–3.9 kg/sq. cm), and friability (0.12-0.15%). The optimised formulation F2 has the least disintegration time i.e., 9±0. 03s. The in–vitro wetting time was less (i.e., 60s) in optimized formulation F2. The water absorption ratio of the formulated tablets was found to be in the range of 27.53±0.12 to 69.75±0.18%. The cumulative drug dissolved in the optimized formulation F2 was found to be 100.17±0.56% in 5 min. Starch tartrate was found to be a superdisintegrant which enhanced the dissolution efficiency with the ibuprofen and hence it could be used in the formulation of fast dissolving tablets to bring immediate release of the contained drug within 5 minutes. Keywords: Fast dissolving, Superdisintegrant, Starch tartrate, Dissolution efficiency.

scholarly journals Formulation Development and Characterization of Meclizine Hydrochloride Sublimated Fast Dissolving Tablets

2014 ◽  
Vol 2014 ◽  
pp. 1-8
Author(s):  
Sateesh Kumar Vemula ◽  
Mohan Vangala
Keyword(s):  
Drug Release ◽  
Dissolution Rate ◽  
Formulation Development ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Weight Variation ◽  
Sublimation Method ◽  
Dissolution Efficiency ◽  
Spectroscopy Studies

The intention of present research is to formulate and develop the meclizine hydrochloride fast dissolving tablets using sublimation method to enhance the dissolution rate. In this study an attempt was made to fasten the drug release from the oral tablets by incorporating the superdisintegrants and camphor as sublimating agent. The prepared fast dissolving tablets were subjected to precompression properties and characterized for hardness, weight variation, friability, wetting time, water absorption ratio, and disintegration time. From in vitro release studies, the formulation F9 exhibited fast release profile of about 98.61% in 30 min, and disintegration time 47 sec when compared with other formulations. The percent drug release in 30 min (Q30) and initial dissolution rate for formulation F9 was 98.61 ± 0.25%, 3.29%/min. These were very much higher compared to marketed tablets (65.43 ± 0.57%, 2.18%/min). The dissolution efficiency was found to be 63.37 and it is increased by 1.4-fold with F9 FDT tablets compared to marketed tablets. Differential scanning calorimetry and Fourier transform infrared spectroscopy studies revealed that there was no possibility of interactions. Thus the development of meclizine hydrochloride fast dissolving tablets by sublimation method is a suitable approach to improve the dissolution rate.

scholarly journals Eudragit S-100 coated sodium alginate microspheres of naproxen sodium: Formulation, optimization and in vitro evaluation / Alginatne mikrosfere naproksen natrija obložene Eudragitom S-100: Priprava, optimizacija i in vitro vrednovanje

2012 ◽  
Vol 62 (4) ◽  
pp. 529-545 ◽  
Author(s):  
Anuj Chawla ◽  
Pooja Sharma ◽  
Pravin Pawar
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Naproxen Sodium ◽  
Drug Loading ◽  
Size Analysis ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
S 100 ◽  
Eudragit S 100

The aim of the study was to prepare site specific drug delivery of naproxen sodium using sodium alginate and Eudragit S-100 as a mucoadhesive and pH-sensitive polymer, respectively. Core microspheres of alginate were prepared by a modified emulsification method followed by cross-linking with CaCl2, which was further coated with the pH dependent polymer Eudragit S-100 (2.5 or 5 %) to prevent drug release in the upper gastrointestinal environment. Microspheres were characterized by FT-IR spectroscopy, X-ray diffraction, differential scanning calorimetry and evaluated by scanning electron microscopy, particle size analysis, drug loading efficiency, in vitro mucoadhesive time study and in vitro drug release study in different simulated gastric fluids. Stability studies of the optimized formulation were carried out for 6 months. SEM images revealed that the surface morphology was rough and smooth for core and coated microspheres, respectively. Core microspheres showed better mucoadhesion compared to coated microspheres when applied to the mucosal surface of freshly excised goat colon. The optimized batch of core microspheres and coated microspheres exhibited 98.42 ± 0.96 and 95.58 ± 0.74 % drug release, respectively. Drug release from all sodium alginate microsphere formulations followed Higuchi kinetics. Moreover, drug release from Eudragit S-100 coated microspheres followed the Korsmeyer-Peppas equation with a Fickian kinetics mechanism. Stability study suggested that the degradation rate constant of microspheres was minimal, indicating 2 years shelf life of the formulation.

scholarly journals Formulation Development and Evaluation of Mouth Dissolving Tablet of Aspirin by Using QbD Approach

2021 ◽  
Vol 20 (1) ◽  
pp. 19-29
Author(s):  
Nilima A Thombre ◽  
Pradeep S Ahire ◽  
Sanjay J Kshirsagar
Keyword(s):  
Drug Release ◽  
Quality By Design ◽  
Formulation Development ◽  
Compression Method ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Design Expert ◽  
32 Factorial Design ◽  
Mouth Dissolving Tablet

In the current investigations, mouth dissolving tablets (MDT) were developed by applying quality by design (QbD) approach. Direct compression method was applied for the preparation of MDT containing aspirin using 32 factorial design with quantity of drug, microcrystalline cellulose (MCC) and crosscarmellose sodium (CCS) as dependant variables. MCC and CCS were used as superdisintegrants. Sodium stearyl fumarate was used as lubricant. Developed MDT were evaluated for characteristics like hardness, friability, disintegration time (DT) and in vitro drug release . Design Expert 11.0 described adequately impact of selected variables (MCC and CCS) at various levels for response under study (DT and friability). The optimized batch showed disintegration time of 15-28 secs, friability within 1% and in vitro drug release of 75-98% after 30 mins, respectively. The present study of experimental design revealed that MCC and CCS are fruitful at low concentration to develop the optimized formulation. As per the results obtained from the experiments, it can be concluded that QbD is an effective and efficient approach for the development of quality into MDT with the application of QTPP, risk assessment and critical quality attributes (CQA). Dhaka Univ. J. Pharm. Sci. 20(1): 19-29, 2021 (June)

scholarly journals Formulation, Development and Evaluation of Ibuprofen Loaded Nano-transferosomal Gel for the Treatment of Psoriasis

2019 ◽  
pp. 1-8
Author(s):  
Marwa H. Abdallah ◽  
Amr S. Abu Lila ◽  
Md. Khalid Anwer ◽  
El-Sayed Khafagy ◽  
Muqtader Mohammad ◽  
...  
Keyword(s):  
Drug Release ◽  
Zeta Potential ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Vesicle Size

The present work was aimed to develop a transferosomal gel of ibuprofen (IBU) for the amelioration of psoriasis like inflammation. Three formulation of IBU loaded transferosomes (TFs1-TFs3) were prepared using different proportions of lipid (phospholipon 90H) and surfactant (tween 80) and further evaluated for vesicle size, zeta potential (ZP), entrapment efficiency and in vitro drug release. The IBU loaded transferosomes (TFs2) was optimized with vesicle size (217±8.4 nm), PDI (0.102), ZP (-31.5±4.3 mV), entrapment efficiency (88.4±6.9%) and drug loading (44.2±2.9%). Further, the optimized IBU loaded transferosomes (TFs2) was incorporated into 1% carbopol 934 gel base and characterized for homogeneity, extrudability, viscosity and drug content. The in vivo pharmacodynamic study of gel exhibited reduction in psoriasis like inflammation in mice. The ibuprofen loaded transferosomal gel was successfully developed and has shown the potential to be a new therapy against psoriasis like inflammation.

scholarly journals FORMULATION DEVELOPMENT OF ORAL FAST-DISSOLVING FILMS OF RUPATADINE FUMARATE

2020 ◽  
pp. 67-72
Author(s):  
ABHIBRATA ROY ◽  
REEGAN AREES ◽  
MADHAVI BLR
Keyword(s):  
Drug Release ◽  
Inclusion Complex ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Solvent Casting ◽  
Formulation Development ◽  
Casting Method ◽  
Disintegration Time ◽  
Low Viscosity

Objective: Rupatadine fumarate (RF) is an anti-allergic drug indicated for the treatment of allergic rhinitis. It has low oral bioavailability due to its poor aqueous solubility and extensive hepatic first pass metabolism. In the present work, oral fast-dissolving films (OFDF) have been formulated and evaluated to facilitate dissolution in the oral cavity itself. Methods: Pullulan and HPMC (5, 15 cps) were employed as film formers and six formulations were tried. The physicochemical compatibility between drug and the polymers was studied by FTIR spectroscopy. RF-beta-cyclodextrin (BCD) inclusion complex was initially prepared and evaluated. The inclusion complex was incorporated into the film. OFDF were formulated and prepared by solvent casting method. The film size for one dose was 2 × 2 cm. The films were evaluated for various film parameters including disintegration time and drug release. Results: Preliminary film studies indicated % of film former solution to be between 3 and 5% for good appearance, mechanical strength, and quick disintegration. Solubility enhancement of RF is almost 40-fold from its BCD inclusion complex. Drug content in the films ranged between 83 and 90%. The pH ranged between 6 and 7 for all the formulations. All OFDF of RF disintegrated within one minute. With higher viscosity grade of HPMC, disintegration was comparatively slower and so was the drug release. Pullulan based films also showed desirable properties. F3 had disintegration time was 28 s and % drug release was 92% in 180 s. Conclusion: OFDF of RF could be formulated employing pullulan and HPMC low viscosity grades by solvent casting method. F3 containing HPMC E5 at 37% by weight of dry film showed desirable film properties. Stability studies indicated that there was no significant change in the films with respect to physicochemical properties and in vitro release.

scholarly journals Design, optimization and evaluation of ibuprofen fast dissolving tablets employing starch succinate: A new superdisintegrant

2019 ◽  
Vol 9 (2) ◽  
pp. 270-279
Author(s):  
Rada Santosh Kumar ◽  
T. Naga Satya Yagnesh
Keyword(s):  
Oral Administration ◽  
Oral Drug Delivery ◽  
Immediate Release ◽  
Order Rate Constant ◽  
Oral Drug ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Drug Content ◽  
Dissolution Efficiency

The current scenario emphasize on oral administration. The main disadvantage in oral administration was difficulty in swallowing for pediatric and geriatric patients. To solve this problem in oral drug delivery system, the formulation of fast dissolving systems found to be the best alternatives.  The present investigation involves in the evaluation of starch succinate as a superdintegrant in the formulation of fast dissolving tablets of poorly soluble drugs employing 23factorial design. Starch succinate was synthesized by esterification process. The synthesized starch succinate was subjected to physical and micromeritic evaluation. All fast dissolving tablets were evaluated for drug content, hardness, friability, disintegration time and other dissolution characteristics like percent dissolved in 5 min (PD5), dissolution efficiency in 5 min (DE5%) and first order rate constant(K1). The starch succinate prepared was found to be fine, free flowing crystalline powder. Starch succinate exhibited good swelling in water. Fourier transform infrared spectra (FTIR) and Differential scanning calorimetry (DSC) study indicated the absence of interaction between ibuprofen and starch succinate. All the fast dissolving tablets formulated employing starch succinate were of good quality with regard to drug content (200±2%), hardness (3.6–4.0 kg/sq. cm), and friability (0.12-0.15%). The optimised formulation F8 has the least disintegration time i.e., 15±0. 02s. The in–vitro wetting time was less (i.e., 15s) in optimized formulation F8. The water absorption ratio of the formulated tablets was found to be in the range of 31.4±0.01 to 68.0±0.04%. The cumulative drug dissolved in the optimized formulation F8 was found to be 99.81± 0.22% in 5 min. Starch succinate was found to be a superdisintegrant which enhanced the dissolution efficiency with the ibuprofen and hence it could be used in the formulation of fast dissolving tablets to bring immediate release of the contained drug within 5 minutes. Keywords: Fast dissolving, Superdisintegrant, Starch succinate, Dissolution efficiency.

Facile Synthesis of Chitosan Based-(AMPS-co-AA) Semi-IPNs as a Potential Drug Carrier: Enzymatic Degradation, Cytotoxicity, and Preliminary Safety Evaluation

2019 ◽  
Vol 16 (3) ◽  
pp. 242-253 ◽  
Author(s):  
Kaleem Ullah ◽  
Muhammad Sohail ◽  
Abdul Mannan ◽  
Haroon Rashid ◽  
Aamna Shah ◽  
...  
Keyword(s):  
Drug Release ◽  
Oral Drug Delivery ◽  
Drug Carrier ◽  
Drug Loading ◽  
In Vitro Cytotoxicity ◽  
Oral Drug ◽  
Specific Enzyme ◽  
Oral Toxicity ◽  
Scanning Calorimetry

Objective: The study describes the development of chitosan-based (AMPS-co-AA) semi-IPN hydrogels using free radical polymerization technique. Methods: The resulting hydrogels were characterized using Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-Ray diffraction (XRD), and Scanning Electron Microscopy (SEM). The successful crosslinking of chitosan, 2- Acrylamido-2-Methylpropane Sulfonic Acid (AMPS), and Acrylic Acid (AA) was confirmed by FT IR. Unloaded and drug-loaded hydrogels exhibited higher thermal stability after crosslinking compared to the individual components. XRD confirmed the decrease in crystallinity after hydrogel formation and molecular dispersion of Oxaliplatin (OXP) in the polymeric network. SEM showed rough, vague and nebulous surface resulting from crosslinking and loading of OXP. Results: The experimental results revealed that swelling and drug release were influenced by the pH of the medium being low at acidic pH and higher at basic pH. Increasing the concentration of chitosan and AA enhanced the swelling, drug loading and drug release while AMPS was found to act inversely. Conclusion: It was confirmed that the hydrogels were degraded more by specific enzyme lysozyme as compared to the non-specific enzyme collagenase. In-vitro cytotoxicity suggested that the unloaded hydrogels were non-cytotoxic while crude drug and drug-loaded hydrogel exhibited dose-dependent cytotoxicity against HCT-116 and MCF-7. Results of acute oral toxicity on rabbits demonstrated that the hydrogels are non-toxic up to 3900 mg/kg after oral administration, as no toxicity or histopathological changes were observed in comparison to control rabbits. These pH-sensitive hydrogels appear to provide an ideal basis as a safe carrier for oral drug delivery.

scholarly journals Fexofenadine HCl Immediate Release Tablets: In vitro Characterization and Evaluation of Excipients

2013 ◽  
Vol 16 (1) ◽  
pp. 1-9
Author(s):  
Shahriar Ahmed ◽  
Mehrina Nazmi ◽  
Ikramul Hasan ◽  
Sabiha Sultana ◽  
Shimul Haldar ◽  
...  
Keyword(s):  
Drug Release ◽  
Immediate Release ◽  
Pharmaceutical Journal ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
In Vitro Characterization ◽  
Weight Variation ◽  
Fexofenadine Hcl

Fexofenadine HCl immediate release tablets were designed to increase the dissolution rate by using superdisintegrants. Different formulations of Fexofenadine HCl were prepared by direct compression method. These formulations were evaluated for hardness, thickness, friability, weight variation, disintegration time, and in vitro dissolution study. The drug release from the formulations were studied according to USP specification (USP paddle method at 50 rpm for 60 minutes) maintaining the temperature to 37°C. Sodium starch glycolate, cross carmellose sodium, crospovidone (kollidon CL), ludiflash and xanthan gum were used in 3%, 6% and 8% concentrations as superdisintegrants. Thus, the ratio of superdisintegrants was changed whereas all the other excipients as well as the active drug (Fexofenadine HCl) remained same in every formulation. Here, 0.001N HCl was used as dissolution medium according to USP and absorbances were determined by using UV spectrophotometer at 217 nm. The F-3 and F-6 formulation prepared by 8% of Sodium starch glycolate and 8% of Cross carmellose sodium showed 99.99% drug release within 30 minutes and 45 minutes, respectively. The disintegration times of F-3 and F-6 formulation were within 9 seconds. The interactions between drug and excipients were characterized by FTIR spectroscopic study. DOI: http://dx.doi.org/10.3329/bpj.v16i1.14483 Bangladesh Pharmaceutical Journal 16(1): 1-9, 2013

Sign in / Sign up

Export Citation Format

Share Document