scholarly journals Optimization Study of Tilt Angle for Single Slope Solar Still

Author(s):  
Onkar Joshi

Water is essential to life. The origin and continuation of mankind is based on water. The supply of drinking water is an important problem for the developing countries. The wooden box has a thickness of 8mm. It consists of a top cover of transparent glass with a tilt of 18°, 26° and is coated with black paint to absorb the maximum possible solar energy. The yield of the single basin solar still is very less and it increases considerably when the solar still was built with copper sheet. An analysis of single slope solar still has done on different tilt angle to optimizing study of tilt angle. They greatly improve the rate of evaporation and the rate of condensation on the cooler surface. The efficiency is higher for solar still made up of copper sheet and its output we have got 1.24 for 18° angle. The optimized tilt angle gave more efficiency than other tilt angle. The optimize water depth is 18mm for 18° angle. This cost-effective design is expected to provide the rural communities an efficient way to convert the brackish water in to potable water.

2014 ◽  
Vol 567 ◽  
pp. 56-61 ◽  
Author(s):  
Ali Riahi ◽  
Khamaruzaman Wan Yusof ◽  
Mohamed Hasnain Isa ◽  
Balbir Singh Mahinder Singh ◽  
Amirhossein Malakahmad ◽  
...  

This study aims at improving a solar distillation still by comparing the performance of four types of double slope single basin solar stills to produce adequate amount of potable water in the areas with confined fresh water. These solar stills fabricated with similar shapes. In each solar still a stainless steel basin with the length of 50 cm, width of 30 cm and depth of 8 cm was utilized. The still configurations differed based on inclusion of 2 cm depth of sea sand layer in the basin, a layer of black paint in the basin and use of a 50 W PV-DC heater. The study was conducted to increase the potable water production under Malaysia tropical condition. A comparative research of cumulative water production among these solar stills showed that solar still with black painted basin was the more efficient; producing 234 %, 190% and 148% the potable water produced by a conventional solar still, solar still with sand layer in basin and solar still connected to a PV-DC heater, respectively.


Author(s):  
Roger Hitchin

Policies to reduce carbon emissions are leading to substantial changes in the demand for electricity and to the structure of electricity supply systems, which will alter the cost structure of electricity supply. This can be expected to result in corresponding changes to the price structure faced by customers. This note is an initial exploration of how possible new price structures may impact on HVAC system and building design and use. Changes in the price structure of electricity supply (separately from changes in price levels) can significantly affect the cost-effective design and operation of building services systems; especially of heating and cooling systems. The nature and implications of these changes can have important implications for future system design and operation.


2016 ◽  
Vol 162 ◽  
pp. 561-569 ◽  
Author(s):  
Aaron M. Hendricks ◽  
John E. Wagner ◽  
Timothy A. Volk ◽  
David H. Newman ◽  
Tristan R. Brown

2014 ◽  
Vol 592-594 ◽  
pp. 2409-2415 ◽  
Author(s):  
S. Naga Sarada ◽  
Banoth Hima Bindu ◽  
Sri Rama R. Devi ◽  
Ravi Gugulothu

In recent years with the exacerbation of energy shortage, water crisis increases around the world. With the continuous increase in the level of greenhouse gas emissions, the use of various sources of renewable energy is increasingly becoming important for sustainable development. Due to the rising oil price and environmental regulations, the demand of utilizing alternative power sources increased dramatically. Alternative energy and its applications have been heavily studied for the last decade. Energy and water are essential for mankind that influences the socioeconomic development of any nation. Pure water resources become more and more scarce every day as rivers, lakes wells and even seawater pollution rapidly increases. Solar energy is one promising solution to secure power and potable water to future generation. The process of distillation can be used to obtain fresh water from salty, brackish or contaminated water. Water is available in different forms such as sea water, underground water, surface water and atmospheric water. Clean water is essential for good health. The search for sustainable energy resources has emerged as one of the most significant and universal concerns in the 21st century. Solar energy conversion offers a cost effective alternative to our traditional usages. Solar energy is a promising candidate in many applications. Among the alternative energy sources used for electricity production, wind and solar energy systems have become more attractive in recent years. For areas where electricity was not available, stand alone wind and solar systems have been increasingly used. The shortage of drinking water in many countries throughout the world is a serious problem. Humankind has depended for ages on river, sea water and underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. To resolve this crisis, different methods of solar desalination have been used in many countries. Distillation is a well known thermal process for water purification, most importantly, water desalination. Most of the conventional water distillation processes are highly energy consuming and require fossil fuels as well as electric power for their operation. Single basin solar still is a popular solar device used for converting available brackish or waste water into potable water. Because of its lower productivity, it is not popularly used. Numbers of works are under taken to improve the productivity and efficiency of the solar still. There are large numbers of PCMs that melt and solidify at wide range of temperatures, making them attractive in a number of applications. PCMs have been widely used in latent heat thermal storage systems for heat pumps, solar engineering and spacecraft thermal control applications. The use of PCMs for heating and cooling applications for buildings has been investigated within the past decade. The experimental results computed in the field of water distillation process using solar energy in the presence of energy storage materials sodium sulphate and sodium acetate are discussed in this paper. Keywords: solar energy, saline water, distillation, phase change material.


Author(s):  
Rajendra Prasad Arani ◽  
Ravishankar Sathyamurthy ◽  
Ali Chamkha ◽  
Abd Elnaby Kabeel ◽  
Mageshbabu Deverajan ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document