Study of Physical Characteristic, Water Vapor Transmission  Rate and Inhibition Zones of Edible Films from Aloe vera (Aloe  barbadensis) Incorporated with Yellow Sweet Potato Starch  and Glycerol

Glucomannan was the main polysaccharide of Aloe vera gel. It was dissolved in water, formed a gel, and transparent as a film. Aloe vera gel was reported antimicrobial and antioxidant activity such as saponin and anthraquinone that was potential for the increased value of an edible film. However, Aloe vera gel form weak film caused glucomannan to have high water absorption. In this research, Aloe vera gel was used as a basis for the polymer film. Yellow sweet potato starch added for the strength matrix component used amylose. This starch expected to give colors from carotenoids. Glycerol also added for the flexibility of an edible film. Randomized Complete Block Design Factorial (RCBD) was applied. The first factor was concentration of yellow sweet potato starch (1%, 2%, 3%) and the second one was glycerol (0,1%, 0,25%, and 0,5%). The parameters tested were color, thickness, transparency, tensile strength, elongation, solubility, water vapor transmission rate, and inhibition zones against E. coli, and S. aureus, fungi A. niger and C. Albicans. The results showed that the addition of yellow sweet potato starch and glycerol with different concentration had a significant effect on color, thickness, transparency, tensile strength, elongation, and solubility. However, an edible film on this research has not to show bacteria and fungi inhibition zone of edible film. P2G1 is the best treatment (yellow sweet potato starch 2% and glycerol 0,1%) produced an edible film with a thickness of 0.12mm, elongation 50.85%, tensile strength 0.55 MPa, solubility 41.03%, transparency 2.13%, vapor transmission rate 3,40 g/m2/24hours, L, a+, b+ score in sequence 41.87, 0.2, and 4.1.

Download Full-text

Pemanfaatan Pati Ubi Jalar Putih (Ipomea batatas L.) dan Pati Biji Alpukat (Persea americana Mill) sebagai Edible Film pada Produk Pangan

Serambi Saintia : Jurnal Sains dan Aplikasi ◽

10.32672/jss.v8i2.2417 ◽

2020 ◽

Vol 8 (2) ◽

pp. 63-70

Author(s):

Musdar Musdar

Keyword(s):

Tensile Strength ◽

Sweet Potato ◽

Potato Starch ◽

Persea Americana ◽

Edible Film ◽

Glycerol Concentration ◽

Local Material ◽

Ipomea Batatas ◽

Sweet Potato Starch ◽

Avocado Seed

Pati ubi jalar putih (Ipomea batatas L.) dan pati biji alpukat (Parsea americana Mill) merupakan bahan tanaman lokal yang berpotensi besar untuk dikembangkan sebagai bahan dasar pembuatan produk edible film. Senyawa pati merupakan hidrokoloid sebagai sumber daya lokal yang perlu dimanfaatkan. Penambahan gliserol yang berfungsi sebagai anti pembekuan bersifat higroskopis dan sesuai untuk berbagai lingkungan. Penelitian ini merupakan penelitian eksperimen menggunakan Rancangan Acak Lengkap Faktorial dengan dua faktor yang masing-masing terdiri dari tiga taraf. Analisis data menggunakan ANOVA dan uji lanjut dengan BNT pada taraf 0,05%. Tujuan penelitian adalah untuk mengetahui perbandingan pati ubi jalar putih terhadap pati biji alpukat dan konsentrasi gliserol untuk menghasilkan edible film. Hasil penelitian terdiri Tebal permukaan 0,02-0,07 mm, kuat tarik 0,15-1,37 MPa, dan hasil uji organoleptik aroma dan warna dengan kategori suka pada skala hedonik. Penambahan pati ubi jalar putih dan tepung alpukat dengan konsentrasi gliserol menyebabkan kekuatan tarik cenderung meningkat dan stabilitas pada edible.Kata kunci: pati, gliserol, edible film.ABSTRACTWhite sweet potato starch (Ipomea batatas L.) and avocado seed starch (Parsea americana Mill) are local material plant with great potential to be developed as basic for making edible film product. Starch compound is a hydrocolloid as local resource that needs to be utilized. The addition of glycerol, which funcions as an anti freeze, is hygroscopic and is suitable for environments variety. This research is an experiment desight Randomized Factorial with two factors, each factor consisting of three levels. Data analysis used ANOVA and further test with BNT at the 0,05 % level. The research objective was to determine the ratio of white sweet potato starch to avocado seed starch and glycerol concentration. Thickness 0.02-0.07 mm, tensile strength 0.15-1.37 MPa, and the results of the organoleptic test for aroma and color with the like catagory on hedonic scale. The addition of white sweet potato starch and avocado strarch with glyserol concentration caused the tensile strength to tend to increase and the stability of the edible film increased. Keywords: starch, glycerol, edible film

Download Full-text

STUDI KARAKTERISTIK FISIK DAN MEKANIK EDIBLE FILM PATI UBI JALAR UNGU DENGAN PENAMBAHAN KITOSAN

Jurnal Teknologi Hasil Pertanian ◽

10.20961/jthp.v10i2.29080 ◽

2019 ◽

Vol 10 (2) ◽

pp. 128

Author(s):

Dhita Ekariski ◽

Basito Basito ◽

Bara Yudhistira

Keyword(s):

Tensile Strength ◽

Film Thickness ◽

Sweet Potato ◽

Potato Starch ◽

Edible Film ◽

Know How ◽

Ipomea Batatas ◽

Sweet Potato Starch ◽

Physical Thickness ◽

Research Show

Edible film is one of alternative packaging which can consume and still protect product from losing nutrition, appearance, flavor, dehydrate and deteriorate at storage and isn’t damage environment. More research using local starch from sweet potato (Ipomea batatas L. poir) was studied. But, characteristic from sweet potato starch shows poor in quality. So, mixing starch with chitosan studied to make characteristic of edible film more useable for wide area. This research to know how is characteristic of edible film starchchitosan. One edible film use 0,8 mL glycerol or 20% (v/w) and chitosan’s soluble 1% acetate acid. One factor uses in this research is amount of chitosan with 3 level 0,5 gram; 1,0 gram; and 1,5 gram. Then, edible film analyzed physical (thickness, solubility and permeability) and mechanic (tensile strength and elongation). Result of research show more chitosan add significantly increased thickness and tensile strength of edible film and significantly decrease solubility and elongation of edible film. But, edible film show no significantly decrease of permeability. Adding more chitosan in edible film starch-glycerol increase edible film thickness to 0,13 –1,90 mm and decrease solubility to 66,87–58,20%. Tensile strength show increase to 1,27–6,90 MPa and elongation decrease to 79,71–46,98%. And for permeability of edible film decrease to 12,40–9,97 (g/ hour m2).

Download Full-text

Composition of White Potato Starch (Ipomea batatas L.) with Avocado Seed Starch (Persea americana Mill) and Glyserol Concentration in Edible Film

Serambi Journal of Agricultural Technology ◽

10.32672/sjat.v2i2.2415 ◽

2020 ◽

Vol 2 (2) ◽

Author(s):

Musdar Musdar ◽

Lukmanul Hakim ◽

Juliani Juliani ◽

Jailani Jailani

Keyword(s):

Sweet Potato ◽

Potato Starch ◽

Persea Americana ◽

Edible Film ◽

Glycerol Concentration ◽

White Potato ◽

Ipomea Batatas ◽

Sweet Potato Starch ◽

Local Plants ◽

Avocado Seed

White sweet potato starch (Ipomea batatas L.) and avocado seed starch (Parsea americana Mill) derived from local plants have the potential to be developed as agricultural products. Starch is a hydrocolloid compound as a potential local resource to be utilized. Glycerol function as an anti-freezing which is hygroscopic. This study aims to determine the ratio of white sweet potato starch with avocado seed starch and the concentration of glycerol for making edible film. This study was an experiment using a completely randimized factorial design with 2 (two) main factor consisting of a comparison of white sweet potato starch and avocado seed with 3 levels: P1 = 35%:65%., P2=50%:50%., P3=65%:35% and glycerol concentration with 3 levels: G1=1%., G2=2%., G3=3%. The best result reasearch were content of 23.03% (tratment P1G1), solubility of 55.57% (treatment P3G2)., swelling test of 9.83% (treatment P2g3)., elongation of 8.18% (treatment P3G2)

Download Full-text

Effect of addition of white turmeric extract against antibacterial properties in edible film sweet potato starch and whey protein

Journal of Physics Conference Series ◽

10.1088/1742-6596/1869/1/012027 ◽

2021 ◽

Vol 1869 (1) ◽

pp. 012027

Author(s):

V Amalia ◽

F W Adipraja ◽

A Supriadin ◽

N N Khasanah ◽

A Junitasari

Keyword(s):

Whey Protein ◽

Sweet Potato ◽

Potato Starch ◽

Antibacterial Properties ◽

Edible Film ◽

Turmeric Extract ◽

Sweet Potato Starch

Download Full-text

Effect of Carrageenan Addition to the Edible Characteristics of Tilapia Skin Gelatin Film (Oreochromis niloticus)

Jurnal Ilmu Pangan dan Hasil Pertanian ◽

10.26877/jiphp.v2i2.3133 ◽

2019 ◽

Vol 2 (2) ◽

pp. 134 ◽

Cited By ~ 1

Author(s):

Anjar Setyaji ◽

Ima Wijayanti ◽

Romadhon Romadhon

Keyword(s):

Tensile Strength ◽

Water Vapor ◽

Palmitic Acid ◽

Oreochromis Niloticus ◽

Transmission Rate ◽

Edible Film ◽

Cross Linking ◽

Water Vapor Transmission Rate ◽

Percent Elongation ◽

Water Vapor Transmission

Gelatin of skin tilapia (Oreochromis niloticus) has the potential as an edible film but has weaknesses due to the hydrophilic so that the value of the water vapor transmission rate is high. The addition of carrageenan combined with palmitic acid is used to improve the characteristics of edible films modified bythe polymer network so that it can act as cross linking which is expected to reduce the rate of water vapor transmission rate edible film. indigo and get the best carrageenan concentration edible film seen from the value of the water vapor transmission rate. The ingredients used are tilapia skin gelatin, carrageenan and palmitic acid. The research method used was experimental laboratories with completely randomized design (CRD) experimental design. Parameters observed were thickness test, solubility, tensile strength, percent elongation and water vapor transmission rate. Data were analyzed using variance analysis (ANOVA). To find out the differences between treatments, the data was tested by HSD further tests. The results showed that the difference in carrageenan concentration significantly affected (P<0,05) the thickness value, tensile strength, percent elongation, solubility and water vapor transmission rate. Addition of carrageenan 0.8% was the best result which has a tensile strength of 4.209 ± 0.241 MPa, elongation percent 16.332 ± 1.019%, solubility of 65.911 ± 2.930% and water vapor transmission rate of 7.792 ± 0.376 g / m2. Hour. Testing of tensile strength in 0,8% carrageenan film showed that the film matrix binds so that the film was not easily broken compared to the control. The low water vapor transmission rate in the 0.8% carrageenan addition edible film sample showed the formation of cross linking between gelatin and carrageenan protein molecules.

Download Full-text

The Effect of Aloe vera and Glycerol Addition on Edible Film of Lesser Yam Starch (Dioscorea esculenta L. Burkill)

Food Technology and Halal Science Journal ◽

10.22219/fths.v3i1.13057 ◽

2020 ◽

Vol 3 (1) ◽

pp. 26

Author(s):

Devi Dwi Siskawardani ◽

Warkoyo Warkoyo ◽

Anggit Ayu Pradana Siwi

Keyword(s):

Tensile Strength ◽

Food Packaging ◽

Transmission Rate ◽

Block Design ◽

Aloe Vera ◽

Edible Films ◽

Thin Layers ◽

Edible Film ◽

Two Factors ◽

Starch Gel

Edible films are thin layers made from hydrocolloids, lipids, and their combinations, functioning as a barrier to mass transfer. The hydrocolloid source that commonly used for the edible film is starch. Lesser yam has the potential to be developed into food packaging products. It has a high starch yield (21.4%). The starch properties, which usually obstruct the edible film production are not resistant to high temperature, it produces a starch suspension with viscosity and ability to form a gel is not uniform, cannot stand in acidic conditions, does not resist stirring, limited solubility in water, and starch gel is easy to syneresis and brittle. This study aimed to investigate the effect of glycerol and Aloe vera concentration on the physical and mechanical edible film. Randomized complete block design (RCBD) factorial with two factors was adopted. The first factor was Aloe vera concentration (0, 1%, 0.2% and 0.3% b / v), and the second factor wasglycerol concentration (17.5, 22.5 and 27.5% v/b). The parameters tested included thickness, tensile strength, elongation, solubility, transparency, and water vapor transmission rate (WVTR). The results showed an interaction between the addition of glycerol and Aloe vera to thickness, tensile strength, solubility, transparency, and WVTR. The best characteristics of edible film were produced by the addition of glycerol 17.5% and Aloe vera0.1% with the thickness (0.11 mm), tensile strength (2.03 MPa), elongation (15.38%), solubility (64.44%), transparency (2.88 mm-1), and WVTR (13.27 g m-2 24 h-1).

Download Full-text

Development and Characterization of Biobased Alginate/Glycerol/Virgin Coconut Oil as Biodegradable Packaging

E3S Web of Conferences ◽

10.1051/e3sconf/202014703016 ◽

2020 ◽

Vol 147 ◽

pp. 03016

Author(s):

Adinda Dwi Putri Marismandani ◽

Amir Husni

Keyword(s):

Tensile Strength ◽

Water Vapor ◽

Transmission Rate ◽

Coconut Oil ◽

Edible Films ◽

Edible Film ◽

Packaging Materials ◽

Water Vapor Transmission Rate ◽

Virgin Coconut Oil ◽

Water Vapor Transmission

Plastics are widely used as packaging materials but can cause environmental problems because they are not easily degraded. Therefore, it was necessary to find alternative packaging materials that were easily degraded, including edible film. The main raw materials for edible film were alginate and plasticizers including glycerol and virgin coconut oil (VCO). The aims of this study were to determine the characteristics of edible films composed of alginate, glycerol and VCO and to determine the best concentration of alginate in edible films. The study was carried out through the manufacture of edible films composed of alginates at various concentrations (2, 3, 4, 5 and 6%), 10% glycerol and 0.01% VCO. The characteristics observed included thickness, tensile strength, elongation, solubility, and water vapor transmission rate (WVTR). The results showed that increasing the concentration of alginate increased the thickness, tensile strength, and elongation of edible films but reduced the solubility and WVTR of edible films. The best alginate concentration was 4% with the following characteristics: thickness, 0.12±0.01 mm; tensile strength, 1.59±0.12 MPa; elongation, 48.73±1.97%; solubility, 92.07±0.57%; and WVTR, 49.18±0.59 g/m2.24 hours. The various alginate concentrations significantly affected the thickness, tensile strength, elongation, and water vapor transmission rate of the edible film produced.

Download Full-text

Effect of Different Formulations on Characteristic of Biobased Alginate Edible Films as Biodegradable Packaging

E3S Web of Conferences ◽

10.1051/e3sconf/202014703003 ◽

2020 ◽

Vol 147 ◽

pp. 03003

Author(s):

Novia Racmayani ◽

Amir Husni

Keyword(s):

Tensile Strength ◽

Water Vapor ◽

Olive Oil ◽

Food Packaging ◽

Raw Materials ◽

Transmission Rate ◽

Edible Films ◽

Edible Film ◽

Water Vapor Transmission Rate ◽

Water Vapor Transmission

Edible film can be used for food packaging. The main raw materials for edible film were alginates and plasticizers including glycerol and olive oil. This study aims to determine the characteristics of edible film composed of alginate, glycerol and olive oil. The study was carried out through the manufacture of edible films composed of alginates with various concentrations (2, 3, 4, 5 and 6%, w / v), 10% glycerol and 0.01% olive oil. Characteristics of edible film was observed including thickness, tensile strength, water vapor transmission rate, solubility and elongation. The results showed that the products met the edible film standard of the Japanese Industrial Standard. Concentration of alginate used had significant effect on thickness, tensile strength, solubility and elongation of the edible film. The films with 6% concentration of alginate showed optimum results with thickness 0,227 ± 0,008 mm, tensile strength 3,097 ± 0,384 MPa, elongation 86,682 ± 5,090 %, solubility 8,690 ± 2,892 % and water vapor transmission rate 45,477 ± 6,262 g/m2/24 h.

Download Full-text

PENGARUH OLEORESIN DAUN KAYU MANIS (Cinnamomum burmanii) DUA TAHAP TERHADAP KARAKTERISTIK EDIBLE FILM TAPIOKA

Caraka Tani Journal of Sustainable Agriculture ◽

10.20961/carakatani.v32i1.15474 ◽

2018 ◽

Vol 32 (1) ◽

pp. 55

Author(s):

Rohula Utami ◽

Lia Umi Khasanah ◽

Katut Kompi Yuniter ◽

Godras Jati Manuhara

Keyword(s):

Tensile Strength ◽

Water Vapor ◽

Transmission Rate ◽

Inhibition Zone ◽

Edible Films ◽

Edible Film ◽

Water Vapor Transmission Rate ◽

Microbial Inhibition ◽

Water Vapor Transmission ◽

Two Stages

Synthetic packaging caused negative impacts on environmental pollution. Utilization of edible film packaging is more effective than synthetic packaging due to the biodegradable properties. The two stages cinnamon leaves oleoresin contain active compounds that performed the antimicrobial and antioxidant activity. In this study, addition of two stages cinnamon leaves oleoresin on edible tapioca film can affect the characteristics of the edible film. Effect of two stages cinnamon leaves oleoresin on edible films characteristics was investigated. The results showed that the addition of two stages cinnamon leaves oleoresin (0%, 0.025%, 0.5%, 0.075%, and 0.1%) does not affect the thickness, tensile strength, and water vapor transmission rate of edible film, while affected the elongation and microbial inhibition of edible film. The edible film with the addition of 0.1% two stages cinnamon leaves oleoresin resulted the best microbial inhibition and physical characteristics of edible film with the thickness of 0.128 mm, tensile strength of 0.2189 MPa, elongation of 283.2721%, water vapor transmission rate of 29.786 g/jam.m2, and microbial inhibition zone of 31.394 mm.

Download Full-text

Karakteristik Fisik dan Mekanik Edible Film Berbasis Pati Kacang Merah (Phaseoulus vulgaris) dan Gel Okra (Abelmoschus esculentus L)

Food Technology and Halal Science Journal ◽

10.22219/fths.v4i1.15655 ◽

2021 ◽

Vol 4 (1) ◽

pp. 82-93

Author(s):

Nur Aini Dwi Cahyo ◽

Warkoyo Warkoyo ◽

Rista Anggriani

Keyword(s):

Tensile Strength ◽

Water Vapor ◽

Transmission Rate ◽

Block Design ◽

Edible Films ◽

Edible Film ◽

Water Vapor Transmission Rate ◽

Food Ingredient ◽

Water Vapor Transmission ◽

Red Bean

Red bean starch is a food ingredient that has a high starch content, which can be used as an edible film. Edible films from the starch group still have shortcomings, namely having brittle and stiff properties, so it is necessary to add other materials to improve the properties of the edible film , namely by adding okra gel. The addition of okra gel is expected to improve the physical and mechanical properties of the edible film. The purpose of this study was to determine the interaction with the addition of variations in the concentration of red bean starch and okra gel on the physical and mechanical characteristics of the edible film. This research consists of two research factors. The first factor is the concentration of red bean starch which consists of 3 levels, namely 4%; 5%; 6; (b / b). The second factor was the concentration of okra gel which consisted of 3 levels, namely 3%; 8%; 13% (w / v). The experiment used a factorial randomized block design (RBD). Observation parameters include analysis of thickness, transparency, tensile strength, elongation, water vapor transmission rate and solubility. The results of this study indicate that there is no interaction between the addition of red bean starch and okra gel on thickness, transparency, tensile strength, elongation, water vapor transmission rate and solubility edible film. The best treatment with results that were close to standard was edible film with a concentration of 5% (w / w) red bean starch and 3% (w / v) of okra gel concentration. The results of the best treatment were 0.16 mm thickness, 4.87 MPa tensile strength, 18.02% elongation, 4.73 g / m2/ day WVTR, 45.14% solubility and 3.98 A / mm transparency.

Download Full-text