Jurnal Teknologi Hasil Pertanian
Latest Publications


TOTAL DOCUMENTS

126
(FIVE YEARS 38)

H-INDEX

2
(FIVE YEARS 0)

Published By Universitas Sebelas Maret

2614-7920, 1979-0309

2021 ◽  
Vol 14 (2) ◽  
pp. 117
Author(s):  
Edy Subroto ◽  
Rossi Indiarto ◽  
Endah Wulandari ◽  
Astri Puji Astari

<p>Adlay (Coix lacryma-jobi L.) is a potential source of starch but has not been utilized optimally. Native adlay starch has several weaknesses such as functional properties of low swelling volume and solubility, prone to retrogradation, and low stability. Physical modification of ultrasonication and chemical modification by oxidation using ozone can be an alternative to improve the functional properties of adlay starch through the formation of porous starch. The aim of this research was to produce porous adlay starch by ultrasonication and ozonation. The study consisted of several different treatments on hanjeli starch (ozonation starch, ultrasonication of 15 minutes, ultrasonication of 30 minutes, combined ultrasonication of 15 minutes and 30 minutes with ozonation). The results showed the appearance of pores on the surface of the granules of modified adlay starch with the best results being modified combination of ultrasonication 30 minutes and ozonation, which resulted in a decrease in swelling volume from 18.13 ± 3.98 mL/g to 15.71 ± 0.35 mL/g, an increase in solubility from 6.76 ± 0.62% to 9.59 ± 0.44%, and a decrease in water absorption capacity from 1.25 ± 0.02 g/g to 1.13 ± 0.02 g/ g. Modification of adlay starch by ultrasonication, ozonation, and their combination effectively produced porous starch granules, but did not cause the formation of new functional groups in starch.</p>


2021 ◽  
Vol 14 (2) ◽  
pp. 96
Author(s):  
Isna Nur Fitriana ◽  
Nani Ratnaningsih ◽  
Badraningsih Lastariwati

<p>Gude beans (Cajanus cajan) (L.) Millsp) or also called pigeon peas are a type of black legume that can be found in India, Asia and Africa. Pigeon peas are a source of protein, fiber, vitamins, and minerals, including potassium, but the utilization of pigeon peas for food, especially in the bakery, is still limited. This study aimed to determine the nutritional content of pigeon pea streussel bread through laboratory tests (proximate test and potassium content test) and public acceptance through panelists' preference test. This study used a R&amp;D (Research and Development) with a 4D model (Define, Design, Development and Disseminate). Public acceptance  was conducted by 100 general public using a preference test form. Data analysis used descriptive statistics and paired sample t-test. The preference test of  gude streussel bread showed 4.09 (preferred). Nutritional content of pigeon pea streussel bread per 100 grams consisted of 51.3 grams of carbohydrates, 7.64 grams of protein, 10.36 grams of fat, 310.53 kcal of energy, and 188.79 mg of potassium. This research show that pigeon pea streussel bread can be consumed as a healthy bread for people with hypertension.</p>


2021 ◽  
Vol 14 (2) ◽  
pp. 108
Author(s):  
Agus Setiyoko ◽  
Fety Andrianing Yuliani

<p>This study aimed to find out the effect of the combination of Sodium Tripolyphosphate (STPP) and stirring time on physical and chemical characteristics of the produced suweg starch. A factorial completely randomized design (CRD) was used in this study.  The study was conducted using 2 treatment factors, namely the addition of Sodium Tripolyphosphate (STPP) concentrations in 1% and 2% level and stirring time for 30 minutes and 60 minutes. The research method use 2 factorial Randomized Block Design (RBD). The data obtained was performed by ANOVA statistical tests and if the result significantly different it would be followed by the Duncan Multiple Range Test at a 5% confidence level. The results showed the effect of the combination of Sodium Tripolyphosphate (STPP) and stirring time on the physical and chemical characteristics of the resulting suweg starch compared to the control suweg starch in the form of an increase in the value of brightness, amylopectin content and solubility, while the value of redness (a*), yellowness (b*), water content, amylose content, and swelling power decreased</p>


2021 ◽  
Vol 14 (2) ◽  
pp. 84
Author(s):  
Setyaningrum Ariviani ◽  
Nurul Hidayati Sholihin ◽  
Galih Poetri Nastiti

<p>The average consumption of dietary fiber in Indonesian is still below the recommended daily intake. Low dietary fiber intake has an impact on the development of degenerative diseases and metabolic syndrome. One of the risk factors for the occurrence of the disease is oxidative stress. The most effective strategy to overcome oxidative stress is through dietary antioxidants intake. Cowpea is proven to be rich in bioactive compounds such as flavonoids, dietary fiber as well as antioxidants, and these compounds have been successfully increased by germination. This study aims to develop cowpea sprouts flour as a functional cereal high in dietary fiber and antioxidants. The cereal was prepared by the best formula based on two steps of sensory analysis. The first one, the sensory analysis conducted to select the formula based on the best sensory quality of the cereal made by the various proportions of cowpea flour (%b/b) (80, 85, 90, 95, 100). The selected formula was further used to prepare the cereal with different flavoring agents (5% b/b) (ginger, cinnamon, and ginger-cinnamon) to find the best formula based on the preference level. The cereals were further analyzed to determine the sensory quality compared to the commercial cereal, the dietary fiber content which includes the total, soluble, and insoluble dietary fibers, as well as the antioxidant potential with the total phenolic content (TPC) evaluation. Formula with 80%(b/b) cowpea flour and 5% (b/b) ginger as flavoring agents produce cereal with the highest preference level and stated as the best formula. The cowpea sprouts cereal exhibited a significantly higher quality of aroma, texture, and overall than the commercial ones. The cereal also showed the highest levels of total, soluble and insoluble dietary fiber as well as the TPC. These results have significant implications on the development of functional cereal using locally legumes sprouts flour.</p>


2021 ◽  
Vol 14 (2) ◽  
pp. 75
Author(s):  
Merkuria Karyantina ◽  
Nanik Suhartatik ◽  
Fajar Eko Prastomo

Issues about environmental damage caused by the presence of plastic-based packaging materials require the development of eco-friendly packaging materials. Breadfruit starch contains amylose which has the potential to be developed into natural packaging materials, or edible films. Another function of packaging was to protect food ingredients from damage, one of which was microbiological damage. This study aimed to determine the level of breadfruit starch to produce edible films that meet the standards and to determine the ability of cinnamon extract to inhibit the activity of tested bacteria. The study was conducted using a factorial completely randomized design with 2 factors, namely the concentration of breadfruit starch and the concentration of cinnamon. The results showed that breadfruit starch can be used at a level of 6% which will produce edible film with a tensile strength of up to 6.37 MPa and a thickness of 0.23 mm. Cinnamon extract were able to inhibit the growth of Escherichia coli and Staphylococcus aureus bacteria. Both breadfruit starch and cinnamon extract have the potential to be developed as natural ingredients in the process of making edible films.


2021 ◽  
Vol 14 (1) ◽  
pp. 44
Author(s):  
Aditya Haradito ◽  
Rohula Utami ◽  
Asri Nursiwi

<p><em>Curing is a method that can be used to maintain the quality of beef. The curing method uses nitrate and nitrite compounds, which have useful roles in the curing process. However, those compounds have a side effect on the body if consumed continuously, which causes cancer disease (carcinogenic). This harmful carcinogenic property can be controlled by the addition of ascorbic acid. Ascorbic acid is commonly found in several fruits, one of which is red guava (Psidium guajava L)</em><em>. </em><em>Therefore, this study aims to find out the most optimal addition of red guava extract in maintaining the beef qualities with curing treatment on the parameters of water content, pH, whc, texture, color, ascorbic acid, and nitrite residue. This study was conducted using a Completely Randomized Design with the various concentration of red guava extract (0%-5%) and observed at soaking times of 0, 2, 4, and 6 days. The analysis was performed by twice of sample repetition and analysis repetition. The results of the analysis were statistically analyzed by One Way ANOVA continued with the DMRT test if the results were significantly different (α = 0.05). Based on the results of the study, the higher of concentration in red guava extract, the pH, water content, whc, b* color, a* color, nitrite residue were smaller while the hardness, springiness, cohesiveness, L* color, a* color, the ascorbic acid content in curing were higher. The </em><em>chosen treatment</em><em> </em><em>due to</em><em> the test parameter in this study was the addition of 4% concentration in red guava extract in the curing process with 2 days soaking times.</em></p>


2021 ◽  
Vol 14 (1) ◽  
pp. 62
Author(s):  
Sherly Novia Yuana Putri ◽  
Wahyu Fajri Syaharani ◽  
Cindy Virgiani Budi Utami ◽  
Dyah Retno Safitri ◽  
Zahra Nur Arum ◽  
...  

<p><em>Nata is an organic food product that has a high fiber content. Nata is a fermented produc</em><em>e </em><em>by <span style="text-decoration: underline;">Acetobacter</span> <span style="text-decoration: underline;">xylinum</span>. </em><em>There is very limited review article that discussed the making process of nata using different starter, raw material, and the length of incubation time in once. So that, </em><em>this </em><em>review</em><em> discusses the comparison of various parameters that affect the fermentation process of nata. This review aims to </em><em>discuss</em><em> the effect of using several types of microorganisms</em><em>,</em><em> different raw materials, and different fermentation time</em><em> on nata production</em><em>. Factors that influence the </em><em>success of nata</em><em> </em><em>fermentation process</em><em> include fermentation time, the addition of ingredients </em><em>(</em><em>sugar, vinegar, and urea</em><em>)</em><em>, the use of hollow caps, avoiding products from shocks, and the use of sterile equipment. The bacteria that can be used for </em><em>making nata</em><em> include <span style="text-decoration: underline;">Acetobacter</span> <span style="text-decoration: underline;">xylinum</span> and <span style="text-decoration: underline;">Acetobacter</span> </em><span style="text-decoration: underline;">sp</span><em>. Several raw materials can be used to make nata, such as coconut water, seaweed, banana peels, tofu water, cassava, and jackfruit straw. The best raw material to make nata from color parameters is seaweed, aroma parameter is jackfruit straw, and taste parameter is cassava. Based on chemical and physical tests, the best raw material for moisture content parameters is seaweed, fiber content parameter is cassava, thickness parameter is banana peel, and yield parameter is coconut water followed by cassava. The length of fermentation affects the thickness and weight of nata, chewier</em><em> texture of nata</em><em>, and the darker</em><em> color of nata</em><em>. The best thickness of nata </em><em>produced </em><em>on the 14<sup>th</sup> day of fermentation was 1.7 cm. The best overall weight of nata on </em><em>produced</em><em> the 10<sup>th</sup> day of fermentation was 600 g/L. The texture of nata was the chewiest in the fermentation time of 14 days</em><em> with</em><em> the value was 72.33 g/5mm. The lowest degree of nata</em><em> </em><em>whiteness </em><em>produced </em><em>on the 14<sup>th</sup> day of fermentation </em><em>with the value </em><em>was 72.307%.</em><em></em></p>


2021 ◽  
Vol 14 (1) ◽  
pp. 20
Author(s):  
Lia Umi Khasanah ◽  
Rohula Utami ◽  
Kawiji Kawiji ◽  
Godras Jati Manuhara

<em>Cinnamon is one of the natural flavor commodities that has not been utilized optimally. One of its derivatives product is essential oil. Essential oils are obtained through the distillation process. The by-product of the distillation process is hydrosol. Hydrosol is an emulsion from essential oil which is bound by water molecules. The hydrosol used in this research was a by-product of processing of cinnamon bark essential oils using Pilot Plan-scale steam distillation. The Pilot Plant-scale steam distillation is using 50 % of destilation tank capacity, with a variety of valve openings (¼, ½, and ¾). The study aimed determine characterization of cinnamon bark hydrosols including total phenol, antioxidant activity of reducing power method, antioxidant activity of radical scavenging (DPPH) method, total flavonoids, and antimicrobial activity against Pseudomonas fluorosence; Aspergillus niger; Bacillus plantarum; Staphylococcus aureus; and E.coli. The results showed that variety of valve openings effected the chemical characteristics of cinnamon bark hydrosols including total phenol, total flavonoids, antioxidant activity (reducing power and DPPH methods). The hydrosols of ¾ valve openings treatment showed antimicrobial activity against Escherichia coli</em>, <em>Staphylococcus aureus</em>, and <em>Pseudomonas fluorescens</em><em>. All hydrosol samples</em><em> showed no antimicrobial activity against Aspergillus niger</em> <em>and</em> <em>Lactobacillus plantarum</em><em>. </em><em>This hydrosol characterization will be used for further recommendations related to the use of hydrosols in the food.</em>


2021 ◽  
Vol 14 (1) ◽  
pp. 31
Author(s):  
Zenita Mulya Astuti ◽  
Dwi Ishartani ◽  
Dimas Rahadian Aji Muhammad

<p><em>The purpose of this research was to determine the effect of velva tomato formula with different proportions of sugar and stevia on the physical, chemical, and sensory of tomato velva. The best tomato velva with sweetener stevia was then determined based on the physical, chemical and sensory characteristics. This research used a completely randomized design (RAL) of one factor which was the propotions of sweetener stevia (K: 50 g sucrose; F1: 39.5 g sucrose and 0.75 g stevia; F2: 29 g sucrose and 1.5g stevia; F3: 19.5 g sucrose and 2.25 g stevia; and F4: 8 g sucrose and 3 g stevia). The result show tat propotions of stevia significantly affects physical characteristics (total dissolved solids, melting power, and overrun), chemical (total calories), and sensory (taste, texture, and overall). While the formula modification has no significant effect on vitamin C and lycopene content. The more proportion of stevia and the less proportion of sucrose reduced total calories, melting power, and total dissolved solids and at the same time increased overrun. The most preferred formula was F1 (39,5g sugar and 0,75g stevia sweetener) which has an overrun of 28.09%, total dissolved solids of 8.43 <sup>o</sup>Brix, melting power of 13.09 minutes and total calories of 328.65 cal/g.</em></p>


2021 ◽  
Vol 14 (1) ◽  
pp. 11
Author(s):  
Anita Gunawan ◽  
Franciscus Sinung Pranata ◽  
Yuliana Reni Swasti

<em>Muffin is a cake whose manufacturing process is very easy, practical and fast. In this study, muffin with a combination sorghum flour and red bean flour are expected to be preferred because have a good nutritional content, especially fiber content. The purpose of this study was to determine the effect of adding sorghum and red bean flour to the chemical, physical, and microbiological qualities of the muffins and to determine the best concentration of adding sorghum flour and red bean flour. The experimental design in this study was a completely randomized design with variations of wheat flour, sorghum flour and red bean flour as much as 100: 0: 0 (K), 65: 30: 5 (A), 70:20:10 (B) and 75. : 10:15 (C). The parameters tested in this study included chemical, physical, and microbiological qualities. The results showed that the muffins with the best treatment were the combination of wheat flour, sorghum flour and red bean flour 75: 15: 10%. Muffins with the best treatment containing 25.99% water content, 1.46% ash content, 20.15% fat content, 9.02% protein content, 39.62% carbohydrate content, 12.11% insoluble fiber content, soluble fiber content of 3.92%, texture 133.5 g and microbiological tests which include total plate and yeast mold numbers that meet the SNI standards for sweet bread (SNI 01-2840-1995).</em>


Sign in / Sign up

Export Citation Format

Share Document