scholarly journals IN VITRO DISSOLUTION STUDY OF GLIMEPIRIDE FROM BINARY AND TERNARY SOLID DISPERSION FORMULATION

2019 ◽  
Author(s):  
Sharmin Akhter ◽  
Md. Sajjad Hossen ◽  
Md. Salahuddin ◽  
Muazzem Ahmed Sunny ◽  
Farzana Akther Sathi ◽  
...  
Keyword(s):  
Polyethylene Glycol ◽  
Peer Review ◽  
Solid Dispersion ◽  
Oral Bioavailability ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Peg 4000 ◽  
Ternary Solid Dispersion ◽  
E Mail

Glimepiride (GMP) is poorly water soluble drug, so solubility is the main constraint for its oral bioavailability. Because, poor aqueous solubility and slow dissolution rate of the glimepiride lead to irreproducible clinical response or therapeutic failure in some cases due to sub therapeutic plasma drug levels. In this study, binary and ternary solid dispersion of glimepiride were prepared with polyethylene glycol 6000 (PEG 6000) and polyethylene glycol 4000 (PEG 4000) at different weight ratios using the solvent evaporation and melting method. It was found the drug was released 0.46% after 5 minutes and only 15.83% within 60 minutes from active glimepiride on the other hand the release pattern of glimepiride from the binary formulation containing PEG 4000 in 1:5 (Formulation coding: G5) showed the best result. It was found that the ternary different SD formulation containing(PEG4000:Glimepiride:Povidone) In ratio 1:1:0.25 (Formulation coding were : G13) showed the best result. The drug was changed to amorphous form after solid dispersion. Itwas also evident that solid dispersions improve solubility of drug particles thus enhancing dissolution characteristics of drugs they increase the oral bioavailability. Peer Review History: UJPR follows the most transparent and toughest ‘Advanced OPEN peer review’ system. The identity of the authors and, reviewers will be known to each other. This transparent process will help to eradicate any possible malicious/purposeful interference by any person (publishing staff, reviewer, editor, author, etc) during peer review. As a result of this unique system, all reviewers will get their due recognition and respect, once their names are published in the papers. We expect that, by publishing peer review reports with published papers, will be helpful to many authors for drafting their article according to the specifications. Auhors will remove any error of their article and they will improve their article(s) according to the previous reports displayed with published article(s). The main purpose of it is ‘to improve the quality of a candidate manuscript’. Our reviewers check the ‘strength and weakness of a manuscript honestly’. There will increase in the perfection, and transparency. Received file Average Peer review marks at initial stage: 4.5/10 Average Peer review marks at publication stage: 7.5/10 Reviewer(s) detail: Name: Dr. Mohammed Abdel-Wahab Sayed Abourehab  Affiliation: Umm Al-Qura University;  Makkah Al-Mukarramah, Saudi Arabia E-mail: [email protected]   Name: Dr. Evren Alğin Yapar Affiliation: Turkish Medicines and Medical Devices Agency, Turkiye E-mail: [email protected] Comments of reviewer(s):

scholarly journals DEVELOPMENT AND IN VITRO DISSOLUTION STUDY OF BINARY AND TERNARY SOLID DISPERSIONS OF ACECLOFENAC

2019 ◽  
Author(s):  
Md. Shahidul Islam ◽  
Rasheda Akter Lucky
Keyword(s):  
Polyethylene Glycol ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Drug Carrier ◽  
Solid Dispersions ◽  
Weight Ratio ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Peg 6000

The poor aqueous solubility of the drug exhibits in variable dissolution rate and hence poor bioavailability. Aceclofenac is poorly water soluble drug. The aim of the present study was to improve the water solubility and the dissolution rate of Aceclofenac by solid dispersion technique using different water soluble polymers. The term solid dispersions refer to the dispersions of one or more active ingredients in an inert carrier or matrix at solid state. In this study, binary solid dispersion of Aceclofenac were prepared by fusion method using Polyethylene glycol 6000 (PEG 6000), Polyethylene glycol 4000 (PEG 4000), Poloxamer as carrier. Different drug-carrier weight ratio was used for this study. The effect of the carrier on the solubility and in-vitro dissolution were studied. It was found the drug was released 26.86% after 5 minutes and only 40.19% within 60 mins from active Aceclofenac on the other hand the release pattern of Aceclofenac from the binary SD formulation containing PEG 6000 in 1:5 ratio (Formulation coding: A5) showed the best result in comparison of other binary and ternary SD formulations which was 62.29% after 5 min and 83.03% within 60 mins. The hydrophilic polymers used for the preparation of solid dispersion are showed significant increase in the solubility of Aceclofenac.

BEHAVIOURAL STUDY OF CYCLODEXTRIN INCLUSION COMPLEX ON ENHANCEMENT OF SOLUBILITY OF ACECLOFENAC

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (11) ◽  
pp. 19-23
Author(s):  
J Shaikh ◽  
◽  
S. V. Deshmane ◽  
R. N Purohit ◽  
K. R. Biyani
Keyword(s):  
Inclusion Complex ◽  
Solid Dispersion ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Phase Solubility ◽  
Solubility Study ◽  
Cyclodextrin Inclusion ◽  
Poorly Water Soluble ◽  
Cyclodextrin Inclusion Complex

The main objective of the present study was to enhance the solubility and dissolution rate of poorly water soluble aceclofenac using its solid dispersion with β-cyclodextrin. FTIR and DSC study was carried out to find out any incompatibility. The phase solubility of drug was carried out in 1, 2, 5, and 10% of β-cyclodextrin in distilled water. Kneading method and solvent evaporation method was use to prepared solid dispersion of aceclofenac and β-cyclodextrin. Different evaluation tests like solubility study in different solvents, PXRD and in vitro dissolution study of aceclofenac- β-cyclodextrin inclusion complex were carried out. The overall finding indicated that β-cyclodextrin is a desirable water soluble carrier, that helps in increasing solubility of drug. Due to its structural feature, β-cyclodextrin forms a good inclusion complex that decreases contact angle of drug with water molecules by increasing wetting properties. Hence, it can be concluded that, β-cyclodextrin is better water soluble carrier molecule in terms of its compatibility and increasing solubility behavior of poorly water soluble drug aceclofenac.

scholarly journals Enrichment of aqueous solubility and dissolution profile of mesalamine: In vitro evaluation of solid dispersion

2021 ◽  
Vol 9 (2) ◽  
pp. 127-135
Author(s):  
Anil Raosaheb Pawar ◽  
Pralhad Vitthalrao Mundhe ◽  
Vinayak Kashinath Deshmukh ◽  
Ramdas Bhanudas Pandhare ◽  
Tanaji Dilip Nandgude
Keyword(s):  
Ulcerative Colitis ◽  
Drug Release ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Peg 4000

The aim of the present study was to formulate solid dispersion (SD) of Mesalamine to enrich the aqueous solubility and dissolution rate. Mesalamine is used in the management of acute ulcerative colitis and for the prevention of relapse of active ulcerative colitis. In the present study, Solid dispersion of Mesalamine was prepared by Fusion and Solvent evaporation method with different polymers. SD’s were characterized by % practical yield, drug content, Solubility, FT-IR, PXRD (Powder X- ray diffractometry), SEM (Scanning electron microscopy), in vitro dissolution studies and Stability studies. The percent drug release of prepared solid dispersion of Mesalamine by fusion and solid dispersion method (FM47, FM67, SE47 and SE67) in 1:7 ratio was found 81.36±0.41, 86.29±0.64, 82.45±0.57and 87.25±1.14 respectively. The aqueous solubility and percent drug release of solid dispersion of Mesalamine by both methods was significantly increased. The PXRD demonstrated that there was a significant decrease in crystallinity of pure drug present in the solid dispersions, which resulted in an increased aqueous solubility and dissolution rate of Mesalamine.The significant increase in aqueous solubility and dissolution rate of Mesalamine was observed in solid dispersion as the crystallinity of the drug decreased, absence of aggregation and agglomeration, increased wetability and good dispersibility after addition of PEG 4000 and PEG 6000.

scholarly journals Development and Biopharmaceutical Evaluation of Tablets Based on the Poorly Water-soluble Substance 1-[2-(2-benzoylphenoxy)ethyl]-6-methyluracil

2020 ◽  
Vol 9 (4) ◽  
pp. 79-87
Author(s):  
D. V. Demchenko ◽  
E. A. Jain (Korsakova) ◽  
V. Yu. Balabanyan ◽  
M. N. Makarova ◽  
V. G. Makarov
Keyword(s):  
Solid Dispersion ◽  
Solid Dispersions ◽  
Active Pharmaceutical Ingredient ◽  
Oral Route ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Technological Properties ◽  
Enhanced Dissolution ◽  
Dispersion Technique

Introduction. 1-[2-(2-benzoylphenoxy)ethyl]-6-methyluracil is a substance of scientific interest intended for the treatment of HIV-infection. However, its low bioavailability is a major limitation in successful drug delivery by oral route. Therefore, the objective of the present work was to enhance itssolubility by using solid dispersion technique followed by the development of a solid dosage form.Aim. Development of the composition and technology of tablets based on 1- [2-(2-benzoylphenoxy)ethyl]-6-methyluracil with the appropriate technological properties providing the most complete release of the active pharmaceutical ingredient (API) in vitro.Materials and methods. The pharmaceutical substance 1-[2-(2-benzoylphenoxy) ethyl]-6-methyluracil is a crystalline powder with poor solubility. Solid dispersions were prepared using Lactose, Kollidon® 17PF, Kollidon® 30, Kollidon® VA64, Kollidon 90F, and PEG-6000 as a carrier mostly in 1:4 ratio by two methods – co-melting and solvent evaporation. The technological properties of substance, tablet masses and tablet quality were determined according to the methods described in the State Pharmacopoeia of the Russian Federation (14th edition).Results and discussion. Article shows the results of development of the composition and technology of a medicine in the form of tablets based on the substance 1-[2-(2-benzoylphenoxy)ethyl]-6-methyluracil. Solid dispersion technique was used to improve the biopharmaceutical properties of 1-[2-(2-benzoylphenoxy)ethyl]-6-methyluracil.Conclusion. In vitro dissolution studies showed enhanced dissolution rate of the drug-loaded solid dispersion with Kollidon 17PF as a carrier as compared to pure drug.

scholarly journals ENHANCEMENT OF SOLUBILITY AND BIOAVAILABILITY OF BCS CLASS-II AMBRISENTAN: IN VITRO, IN VIVO AND EX VIVO ANALYSIS

2022 ◽  
pp. 67-74
Author(s):  
RAHUL RADKE ◽  
NEETESH K. JAIN
Keyword(s):  
Solid Dispersion ◽  
Ex Vivo ◽  
Class Ii ◽  
Water Soluble ◽  
Pure Form ◽  
In Vitro Dissolution ◽  
Drug Solubility ◽  
Bcs Class Ii

Objective: The aim of this investigation was to enhance the solubility and bioavailability of the BCS class II poorly water-soluble drug ambrisentan by solid dispersion (SD) techniques using Gelucire 50/13 as a hydrophilic carrier. Methods: Solid dispersion of ambrisentan was prepared by kneading method using different dug: carrier ratios. Prepared SD was characterized for solubility, drug content, percentage yield, in vitro dissolution, ex vivo permeation and bioavailability. Solid-state characterization was performed by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results: All the SDs formulations showed increase in drug solubility and dissolution when compared with its pure form. Aqueous solubility of the drug was found to be increased 8.23 fold in SD. DSC study showed that endothermic peak of the drug was disappeared in spectra of SD, confirming its amorphous conversion, XRD study revealed the reduction to almost absence of specific high-intensity peaks of drug which confirmed the reduction of crysatallinity of ambrisentan in SD. SEM of optimized SD formulation demonstrates the complete encapsulation and solubilization drug. In vitro dissolution study showed that optimized SD formulation (ASD4) gives the faster drug release of 101.5% in 60 min, as compare to its pure form and other SD formulations. Conclusion: Solid dispersion ASD4 prepared with 1:4 drug to carrier ratio showed the highest drug solubility and in vitro dissolution. The ex vivo and in vivo studies performed on optimized formulation ASD4 showed enhancement in drug permeability and bioavailability in Gelucire 50/13 based SD formulation.

scholarly journals Effect of Amphiphilic Graft Co-Polymer Carrier on Solubility and Dissolution Enhancement of Ambrisentan

2021 ◽  
pp. 329-338
Author(s):  
Rahul Radke ◽  
Neetesh K. Jain
Keyword(s):  
Ftir Spectroscopy ◽  
Dissolution Rate ◽  
Solid Dispersion ◽  
Solid Dispersions ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Dissolution Enhancement ◽  
Polymer Carrier ◽  
Dissolution Study

Aim: Ambrisentan is a endothelin type A selective receptor antagonist used in the management of pulmonary arterial hypertension. Ambrisentan is BCS Class II drug haves very poor solubility in water and shows incomplete absorption after oral administration. The present work was aimed to study the effect of amphiphilic graft co-polymer carrier on enhancement of solubility and dissolution rate of poorly water soluble drug ambrisentan. To improve the aqueous solubility of ambrisentan solid dispersion was formulated by using novel carrier amphiphilic graft co-polymer (Soluplus® ). Materials and Methods: Solid dispersion was prepared by kneading technique by utilizing various ratios of carrier. Obtained solid dispersions ware evaluated for solubility, percentage yield, drug content and in vitro dissolution study. Powder characterization was performed by infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Results: FTIR spectroscopy shows no interaction between drug and polymer. DSC study showed that endothermic peak of drug was completely disappeared in Solid dispersion suggesting complete miscibility of drug in Soluplus®. XRD study suggest the conversion of crystalline ambrisentan in to amorphous form. All solid dispersions prepared with Soluplus® as a carrier showed increase in solubility. Solubility of ambrisentan was found to be increased 7.17 fold in optimized SD formulation ASD5. In vitro dissolution study showed the faster drug release from SD formulation compare to its pure form. All solid dispersion formulation’s release more than 50% of drug in first 10 min. Conclusion: This study conclude that the preparation of amphiphilic graft co-polymer based solid dispersion prepared by kneading technique is found to be useful in enhancement the solubility and dissolution rate of ambrisentan.

Use of acidifier and solubilizer in tadalafil solid dispersion to enhance the in vitro dissolution and oral bioavailability in rats

2017 ◽  
Vol 526 (1-2) ◽  
pp. 77-87 ◽  
Author(s):  
Jin-Seok Choi ◽  
Soon-Hyung Kwon ◽  
Sang-Eun Lee ◽  
Woo Suk Jang ◽  
Jong Chan Byeon ◽  
...  
Keyword(s):  
Solid Dispersion ◽  
Oral Bioavailability ◽  
In Vitro Dissolution

scholarly journals Development of a self-microemulsifying drug delivery system of domperidone: In vitro and in vivo characterization

2013 ◽  
Vol 63 (2) ◽  
pp. 241-251 ◽  
Author(s):  
Ramesh Jakki ◽  
Muzammil Afzal Syed ◽  
Prabhakar Kandadi ◽  
Kishan Veerabrahma
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Oral Bioavailability ◽  
Ternary Phase Diagram ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Size Analysis

The main objective of this work was to prepare a self-micro emulsifying drug delivery system (SMEDDS) for enhancement of oral bioavailability of domperidone, a poorly water soluble drug. The solubility of the drug was determined in various vehicles. A pseudo ternary phase diagram was constructed to identify the self-micro emulsification region. The in vitro self-micro emulsification properties and droplet size analysis of SMEDDS were studied following their addition to water under mild agitation. Further, the resultant formulations were investigated for clarity, phase separation, globule size, effect of pH and dilutions (1:100, 1:500, 1:1000) and freeze-thaw stability. The optimized formulation, SMEDDS-B used for in vitro dissolution and bioavailability assessment, contained oil (Labrafac CC, 25 %, m/m), surfactant (Tween 80, 55 %, m/m), and co-surfactant (Transcutol®, 20 %, m/m). The preliminary oral bioavailability of domperidone from SMEDDS was 1.92-fold higher compared to that of domperidone suspension in rats. The AUC0-24 and cmax values were 3.38 ± 0.81 μg h mL-1 and 0.44 ± 0.03 μg mL-1 for SMEDDS-B formulation in comparison with 1.74 ± 0.18 μg h mL-1 and 0.24 ± 0.02 μg mL-1 for domperidone suspension, suggesting a significant increase (p < 0.05) in oral bioavailability of domperidone from SMEDDSS.

Sign in / Sign up

Export Citation Format

Share Document