scholarly journals Applying GIS for Mapping Agricultural Roads Network in Felda Trolak Utara for Oil Palm Plantation Management

2010 ◽  
Vol 1 (1) ◽  
pp. 11-15
Author(s):  
Mohamad Khairil Mohamad

Malaysia oil palm industry is the leading commodities and one of the major contributors to the Malaysia economic after oil and gas sector. Malaysia and Indonesia palm oil plantations are the major commodity producer with Malaysia currently being the world’s second-largest area of oil palm after Indonesia. Together these two countries account about 84% of total world production and 88% of global exports. With the increasing price and demands for the Crude Palm Oil (CPO) and with the 4.69 million hectares that were planted with oil palm trees, plantation industry and estate managers has to look into the most crucial factor that will decide the yield and quality of the CPO that is being sent to the mill. Typically, palm oil plantations include production areas requiring supporting infrastructure such as buildings, roads and services/management. When there is a better management of the roads in the estates, better Fresh fruit Bunch (FFB) and CPO quality will be sent to mill and processed. Road transport has a fundamental meaning for the sustainable agriculture. Poor quality and inadequate coverage of roads, lack of maintenance operations and outdated road maps continue to hinder economic development in the plantation. This work focuses on studying the present state of road infrastructure and its mapping in Felda Trolak Utara, Perak. The road infrastructure of the study area is studied by GPS and GIS based methodology. Data of road infrastructure characteristics were collected from GPS device and road infrastructure of the test sites then analyzed in GIS environment. The results of this study may be applied to road infrastructure mapping in oil palm plantation in general context, although with certain limits. In particular, the “noise” of road network occurred and need to rectify the topologies of the network.

2018 ◽  
Vol 46 (1) ◽  
pp. 111 ◽  
Author(s):  
Edi Santosa ◽  
Indra Mario Stefano ◽  
Abdul Gani Gani Tarigan ◽  
Ade Wachjar ◽  
Sofyan Zaman ◽  
...  

<p align="center"><strong>ABSTRACT</strong></p>In a long life cycle of oil palm plantation, sustainable water management is mandatory because irrigation is rarely applied. In order to develop water management for sustainable palm oil production, tree-based water footprint of well-established oil palm plantation was assessed. Field data were collected from February to June 2016 in Dolok Ilir managed by PTPN IV, North Sumatera, Indonesia. Additional data were obtained from interviews on the site and the surrounding estates, reports and references. Results showed that water footprint (WF) for production of fresh fruit bunch (FFB) was 510.69 m3 tonne-1 and crude palm oil (CPO) was 517.79 m3 tonne-1. Green, blue and grey water contributed 94.78%, 0.71% and 4.50% in FFB, and 93.48%, 1.66% and 4.85% in CPO productions, respectively. All green WF was calculated basen on actual value of tree evapotranspiration, therefore, the value was mostly lower than other researchs. Low amount of blue water indicates that the oil palm tree in North Sumatera extracts low amount of ground water. On the other hand, grey water for pollution dilution of fertilizers, pesticides and herbicides were high, i.e., 15.15 m3, 4.77 m3, 3.07 m3 tonne-1 FFB, respectively. It implies that reduction of grey water should be implemented in the near future through precission farming.<br /><br />Keywords: CPO, Elaeis guineensis, precission farming, sustainable production, water footprint<br /><br /><br />


2019 ◽  
Vol 7 (3) ◽  
pp. 182-194
Author(s):  
Valentina Sokoastri ◽  
Doni Setiadi ◽  
Arif Rakhman Hakim ◽  
Andre Dani Mawardhi ◽  
M Lukman Fadli

Forty percent of the total oil palm plantation area in Indonesia belong to the smallholder palm oil plantations. The productivity of smallholder oil palm plantations is still relatively low, only around 2-3 tons of CPO/ha/year under PBN dan PBS. The aim of this study is to identify internal dan external constraints that cause low productivity of smallholder oil palm dan the recommended solutions. This research was taken in Sanggau dan Sintang Regencies which are the largest areas of smallholder palm oil plantation in West Borneo. Data obtained were analyzed by SWOT. The results showed that there were four main strategies to increase productivity dan solve problems on oil palm plantation in Sanggau dan Sintang Regencies, namely, 1) intensifying technical training of oil palm cultivation to increase the farmers’ knowledge dan capabilities, 2) increasing the role dan ability of farmer institutions both farmer groups dan ‘koperasi’ in establishing cooperation with stakeholders dan in marketing fresh fruit bunch (FFB), 3) escalating the awareness dan understanding of farmers in using digital information technology to support their business activities on oil palm, dan 4) strengthening the government protection against middlemen.


Author(s):  
Nuruly Myzabella ◽  
Lin Fritschi ◽  
Nick Merdith ◽  
Sonia El-Zaemey ◽  
HuiJun Chih ◽  
...  

Background: The palm oil industry is the largest contributor to global production of oils and fats. Indonesia and Malaysia are the largest producers of palm oil. More than a million workers are employed in this industry, yet there is a lack of information on their occupational health and safety. Objective: To identify and summarize occupational hazards among oil palm plantation workers. Methods: A search was carried out in June 2018 in PubMed, Web of Science, Scopus, and Ovid. Relevant publications were identified by a systematic search of four databases and relevant journals. Publications were included if they examined occupational hazards in oil palm plantation workers. Results: 941 publications were identified; of these, 25 studies were found eligible to be included in the final review. Of the 25 studies examined, 19 were conducted in Malaysia, 2 in Costa Rica, and one each in Ghana, Indonesia, Myanmar, Papua New Guinea, and Cameroon. Oil palm plantation workers were found to be at risk of musculoskeletal conditions, injuries, psychosocial disorders, and infectious diseases such as malaria and leptospirosis. In addition, they have potential exposure to paraquat and other pesticides. Conclusion: In light of the potential of palm oil for use as a biofuel, this is an industry with strong growth potential. The workers are exposed to various occupational hazards. Further research and interventions are necessary to improve the working conditions of this already vast and growing workforce.


MATEMATIKA ◽  
2019 ◽  
Vol 35 (1) ◽  
pp. 95-104
Author(s):  
Mohd Ismail Abd Aziz ◽  
Noryanti Nasir ◽  
Akbar Banitalebi

Successful palm oil plantation should have high returns profit, clean and environmental friendly. Since oil palm trees have a long life and it takes years to be fully grown, controlling the felling rate of the palm oil trees is a fundamental challenge. It needs to be addressed in order to maximize oil production. However, a good arrangement of the felling palm oil trees may still affect the amount of carbon absorption. The objective of this study is to develop an optimal felling model of the palm oil plantation system taking into account both oil production and carbon absorption. The model facilitates in providing the optimal control of felling rate that results in maximizing both oil production and carbon absorption. With this aim, the model is formulated considering palm oil biomass, carbon absorption rate, oil production rate and the average prices of carbon and oil palm. A set of real data is used to estimate the parameters of the model and numerical simulation is conducted to highlight the application of the proposed model. The resulting parameter estimation is solved that leads to an optimal control of felling rate problem.


2019 ◽  
Vol 19 (2) ◽  
Author(s):  
Simone Almeida Pena ◽  
Ana Cristina Mendes-Oliveira

Abstract: In this study we described the diet of Hylaeamys megacephalus (G. Fisher, 1814) and investigated the degree of individual variation in the diet of this species among the Amazon Forest and the oil palm plantation. We analyzed the stomach contents of 36 individuals, of whom 11 were collected in the forest and 25 captured in the palm oil palm plantation. The H. megacephalus diet consisted of 18 food items, of which 12 were animal composition and eight were vegetable composition. The niche amplitude of the species was narrower in the forest area (Baforest = 0.013) compared to the palm tree plantation area (Bapalm = 0.478). This shows that individuals have greater niche overlap in forest areas, while in the plantation areas the animals expand their food niche. In addition, the values of the mean of the individual diet in relation to the diet of the entire population were lower in the palm oil palm plantation environment (ISpalm = 0.164) than in the Forest environment (ISforest = 0.357), indicating a high specialization in the palm oil plantation. These results indicate a population mechanism to reduce intraspecific competition in response to scarce resources.


2020 ◽  
Vol 7 ◽  
pp. 324-334 ◽  
Author(s):  
O.B. Olafisoye ◽  
O.S. Fatoki ◽  
O.O. Oguntibeju ◽  
O.A. Osibote

2019 ◽  
Vol 30 (5) ◽  
pp. 1072-1094 ◽  
Author(s):  
Almasdi Syahza

Purpose The purpose of this paper is to develop strategies for potential environmental impacts as a result of institutional arrangement and development of oil palm downstream industry both regionally and nationally. Design/methodology/approach The research location is in the areas potential for oil palm plantation development, either by plasma through BUMN and BUMS or self-supporting by the society. The research location will be divided into two parts, namely, the land area and the coastal area. The Riau land areas are Regency of Kampar, Rokan Hulu, and Kuantan Singingi, while Riau coastal areas are Regency of Pelalawan, Siak, Bengkalis, Indragiri Hilir, Indragiri Hulu and Rokan Hilir. Both research areas have different productivity due to the different soil fertility levels. The sustainability level of oil palm plantation from the socio-economic and environmental aspects is analyzed using the multi-dimensional scaling approach modified into Rapid Appraisal-Index Sustainability of Palm Oil Management. Findings In Riau Province, the development of oil palm is quite rapid. This is reasonable for several reasons which include the following supporting factors: the geographical condition of the Riau region is very supportive; the high demand for palm oil derivative products; the existence of market guarantee for oil palm farmers; the higher income oil palm generates than other plantation crops; and the relatively flat area. Most of the problems faced by oil palm farmers are the use of less good seeds, the length of the fruit laying at the location of the plantation, the inadequate production road, the relatively far distance to palm oil mill (POM) (National Agency of Drug and Food Control), the tendency of determining the unilateral revenue of the POM, the collectively measurement of revenue and the general revenue information. The development of oil palm plantations has created an entrepreneurial capability for farmers who are able to capture business opportunities in the agricultural sector, especially the plantation sub-sector. Originality/value The originality of this paper shows the comprehensively control strategy, potential of environmental impact and palm oil plantation. The method used for data collection was rapid rural appraisal method because accurate information is needed in a limited time as it relates to decisions related to village development that must be taken immediately. The study area was conducted in Riau Province because Riau Province is one of the biggest palm oil producers in Indonesia. The study sites will be divided into two, namely, the land area and the coastal area.


Pastura ◽  
2017 ◽  
Vol 5 (2) ◽  
pp. 104
Author(s):  
Ida Indrayani ◽  
James Hellyward ◽  
Yozil Alveni

This study was to determine the carrying capacity of palm oil plantation and oil palm industry waste could be used as beef cattle feed in West Sumatra. This study used a desk study method, it was the activity that searched secondary data such as the results of other relevant studies, official documents and other important records in several government agencies and other relevant institutions. The analysis showed people carrying capacity of palm oil plantations folk in West Sumatra with the utilization of forage, leaves no stick and palm frond as cattle feed as a whole can accommodate about 390 913 head of cattle. While carrying capacity of byproduct of palm oil processing wastes amounted to 465 812 head of cattle. Overall, therefore, the palm oil plantation folk, the state and the private sector is able to provide beef cattle feed to 856 725 head of cattle. It concluded that beef cattle still have a chancethe to be developed by use oil palm plantation and byproducts as a substitute for forages.Key words: oil palm plantation, carrying capacity, oil palm industry waste, beef cattle feed


2019 ◽  
Vol 30 (1) ◽  
pp. 141-149
Author(s):  
MA Awal ◽  
SS Tabriz

At present oil palm growers are facing problem to extract crude palm oil in Bangladesh. Processing of palm oil categorized into various forms but basic processing stages are essentially the same including harvesting, sterilization, bunch stripping, digestion, crushing, clarification and drying. Extracting of palm oil is very difficult by traditional method and oil recovery rate is very low. Although mechanical processing is costly but produces good quality Crude Palm Oil (CPO) and oil recovery rate is high. An electric motor operated oil palm crusher was designed and developed and tested in laboratory under the Department of Farm Power and Machinery, Bangladesh Agricultural University, Mymensingh for processing of crude palm oil from fresh fruit bunch. The crusher was designed by using Auto-Cad software. It was fabricated according to design parameters. The major parts of the crusher were screw shaft, cylinder, hopper, hollow bars, pressure case cap, jamnut and frame which were fabricated by mild steel (MS), ball bearing, gear and pinion, line and idle shaft and spring were fabricated by carbon steel (CS) whereas driver and driven pulley were fabricated by cast iron(CI). Crusher was mounted on the frame. A 9 hp electric motor was used as a power source. Crusher was tested after fabrication and 3000 gm fresh fruits were used. About 700 gm crude palm oil, 800 gm oil cake, 1400 gm skum were collected from 2700 gm pretreated fruits. The crushing capacity and crude oil percentage of the crusher was 6.49 kg/hr and 25.93%, respectively. Rotating speed of screw was 40 rpm for smooth running. The weight of crusher was only 70 kg which is easy to operate by single person. The developed oil palm crusher may fulfill the demand of smallholder growers to extract oil from fresh fruit bunches. Progressive Agriculture 30 (1): 141-149, 2019


2011 ◽  
Vol 367 ◽  
pp. 739-743
Author(s):  
C.O. Ilechie ◽  
A.O. Akii Ibhadode ◽  
B.O. Abikoye

The oil palm (elaeis guneensis) is a very important economic crop in West Africa where it is native. The fruit bunch contains 23 to 30% oil and is the highest yielding of all vegetable oil crops. Palm oil is the second most important vegetable oil in world consumption and the first to be commercialized internationally. Africa and indeed Nigerian was the world’s highest producer of palm oil prior to 1961. Today, Nigeria is the fourth largest producer after Indonesia, Malaysia and Thailand. One of the main reasons given for this fall is lack of efficient mechanized processing equipment for the small-scale producers who produce over 80% of the country’s palm oil. Their methods of production are labour intensive, batch, tedious, inefficient, and produce poor quality oil, have low throughput, unable to extract palm kernel alongside palm oil and so productivity is low and products (palm oil and palm kernel) lack competitiveness. This work has developed a mechanized oil palm fruit processing mill with six fully integrated systems for extracting good quality palm oil and palm kernel, while utilizing process wastes as the main source of heat energy. Each system/unit is expected to operate at the best quoted system efficiency. Tests are ongoing to determine and confirm these efficiencies.


Sign in / Sign up

Export Citation Format

Share Document