scholarly journals Efficiency of stump chipping of soft and hard broadleaves

2018 ◽  
pp. 45-62
Author(s):  
Milorad Danilovic ◽  
Slavica Antonic ◽  
Dusan Stojnic ◽  
Pajo Vojvodic ◽  
Vladimir Cirovic

Stump removal is a regular measure of terrain preparation during the establishment of poplar plantations. It is implemented in order to increase the efficiency of implementation of regular silvicultural measures, but also the efficiency of comprehensive wood mass utilization. Stump removal in poplar plantations is performed by various facilities, including various types of wood chippers attached to a tractor of certain technical characteristics. The aim of this paper is the evaluation of efficiency of the tractor ?Same Laser 150? with the wood chipper ?Rotor S? attached to it, during the stump chipping of soft and hard broadleaves in various operating conditions. The research was carried out in several sample plots located in an area managed by the public enterprise ?Vojvodina sume?. The differentiation of the operating conditions was based on multiple criteria (distance between stumps, level of forest order establishment, carrying capacity of the ground, percentage share of tree species, etc.). The work effects of stump chipping were established using the work and time study. The duration of stump chipping ranged from 0,82 min/stump to 2,29 min/stump and it depended on stump diameter, root system development, diameter of the auger used for stump chipping, tractor power, etc. In addition to being dependent on some other things, chipping time depends on the number of passes and auger diameter. The time of transition from stump to stump is under the highest impact of ground conditions, which implies the amount of wood residue, the presence of stump shoots, and the occurrence of high weeds. The implemented analysis served as the basis for the ranking of the factors depending on their impact on the work effects of the investigated facility. In addition, it was concluded that greater effects can be achieved by using the command that provides a forward and backward movement of the aggregate without pushing the clutch pedal and pulling the gearshift lever, but also by installing a handle for the change of rpm (revolutions per minute) of the output shaft in the driver?s cabin. This handle is currently located on a differential housing next to the left wheel, so the driver has to leave the cabin to change the rpm of the output shaft. Another problem is that the tractor ?Same Laser 150? has double commands installed in the cabin: the clutch, brake and gas pedal, but when the seat makes a 180 degree turn those pedals are not at the adequate height. In addition to that, the operator does not have enough space for work in the tractor cabin. An increased cabin space and a better position of the above mentioned commands would enhance work efficiency.

2018 ◽  
Vol 16 (1) ◽  
pp. 93-102
Author(s):  
Muhammad Husnul Maab ◽  
Shadu S. Wijaya ◽  
Zaula Rizqi Atika ◽  
Denok Kurniasih

The emergence of rural community owned enterprises khown as BUMDes has been in line with evolution of public administration pradigm, from OPA to NPM who implemented in local government. Local potency development becomes a substantial aspect to improving local competitiveness. Hence, BUMDes formation is one of the models financial capacity to develop local potency in rural level. The aim is comparing traditional and public enterprise based management in local potency management. The results show that there is a fundamental difference in the management of local potency in rural level. Consequently, We argue that has been on the right track, the evolution of the government business model to the public enterprise for the management of local potency in rural level. Evolution of BUMDes is from a bureaucratic to the business sector model, but as a social business not profit maximizing businesses.


1996 ◽  
Vol 65 (2) ◽  
pp. 303-308 ◽  
Author(s):  
Yasuhiro IZUMI ◽  
Yasuhiro KONO ◽  
Akira YAMAUCHI ◽  
Morio IIJIMA

Author(s):  
S. Acikbas ◽  
M.A. Ozyazici ◽  
H. Bektas

Background: Plants face different abiotic stresses such as salinity that affect their normal development, growth and survival. Forage pea is an important legume crop for herbage production in ruminants. Its agronomy requires high levels of irrigation and fertilization. This study aimed to evaluate the effect of salinity on seedling root system development in forage pea under semi-hydroponics conditions.Methods: Different treatment of NaCl doses (0, 50, 100, 150, 200, 250 and 300 mM) on root architecture was investigated in two different forage pea cultivars (Livioletta and Ulubatlý) with contrasting root structures under controlled conditions. The experimental design was completely randomized design with three replications and nine plants per replication.Result: Salinity affects root and shoot development differently on these cultivars. Despite the salinity, Livioletta produced more shoot (0.71 g) and root biomass (0.30 g) compared to Ulubatlý (0.52 g and 0.25 g for Root and Shoot biomass, respectively) at 150 mM and all other salinity levels. Livioletta developed a better root system and tolerated salt to a higher dose than Ulubatlý. Understanding root system responses of forage pea cultivars may allow breeding and selecting salinity tolerant cultivars with better rooting potential.


2020 ◽  
Vol 02 (03) ◽  
pp. 35-38
Author(s):  
Kamala Arastun Sadigov ◽  

The presented article provides seed propagation, seedling morphology and growth dynamics, root system development in connection with the introduction of Hippophae rhamnoides L. species found in our natural flora in Absheron. The study found that the species Hippophae rhamnoides L. is well adapted to the soil and climatic conditions of Absheron and can be grown in cultural conditions. Key words: Hippophae rhamnoides L., introdiction, seed, repoduction, morphology, dewelopment, root system


2010 ◽  
Vol 39 (8) ◽  
pp. 1666-1675 ◽  
Author(s):  
Marcio Mahmoud Megda ◽  
Francisco Antonio Monteiro

The objective of this work was to study morphogenic characteristics, and dry matter production of roots and shoots of marandu palisadegrass (Brachiaria brizantha cv. Marandu) submitted to combinations of nitrogen and potassium, in a nutritive solution, employing silica as substrate. The experiment was carried out in a greenhouse during the summer. It was used a 5² fractionated factorial scheme with 13 combinations of nitrogen and potassium, which were distributed in a randomized block design, with four replications. The nitrogen × potassium interaction was significant for the number of tillers and leaves, for leaf area, for shoots and root section dry mass, for total length and surface and specific length and surface in the roots. Production of aerial part dry mass positively correlated with the number of tillers and leaves and grass leaf area. Nitrogen rates modulated the root system development, and the root specific length and surface decreased when high rates of nitrogen and potassium were supllied. Nitrogen and potassium influence Marandu palisadegrass morphogenic characteristics, which are determinant for grass dry matter production.


IFLA Journal ◽  
2018 ◽  
Vol 45 (1) ◽  
pp. 34-47 ◽  
Author(s):  
Claudia Șerbănuță

For almost half a century Romania was under a totalitarian regime. In times of severe censorship and information control the communist regime promoted public libraries. This paper will present the main phases of the public library system development and discuss how the state’s emphasis on providing large collections of books influenced library services. As part of an oral history project, this paper will use memories of people who worked in public libraries of various sizes in the 1970s and the 1980s, archival documents and secondary sources to contribute to a more nuanced discussion about the recent history of Romanian public libraries. What were the phases of the development of the national library system and how important was the library collection for the institutional survival of the public library? The paper will also discuss the collection development policy and contrast it with the impoverished professional development within the library system.


Revista CERES ◽  
2018 ◽  
Vol 65 (3) ◽  
pp. 291-295 ◽  
Author(s):  
Fernando Marcelo Chiamolera ◽  
Antonio Baldo Geraldo Martins ◽  
Pedro Luiz Martins Soares ◽  
Tatiana Pagan Loeiro da Cunha-Chiamolera

ABSTRACT Root-knot nematode Meloidogyne enterolobii is the main phytosanitary problem of guava cultivation in Brazil. Among the strategies to manage the problem, the best prospects are in identifying or developing cultivars or rootstocks that are resistant to this nematode. To identify plants with potential as rootstocks for guava, the reaction of araçá (wild guava) to M. enterolobii was assessed in a greenhouse experiment. Seven araçá species were evaluated (Eugenia stipitata, Psidium acutangulum, P. cattleyanum ‘yellow’, P. friedrichsthalianum, P. guajava var. minor, P. guineense, and Psidium sp.). The plants were inoculated with a suspension of 3,000 eggs of M. enterolobii, using eggplant as control treatment. The parameters fresh root mass, number of eggs and second stage juveniles (J2) per root system, the reproduction factor (RF = Pf/Pi), and araçá reaction were determined during the experiment. RF of the araçá species E. stipitata, P. cattleyanum ‘yellow’, and P. friedrichsthalianum was less than one (RP < 1), therefore resistant to M. enterolobii. The araçá trees had good root system development and the susceptible plants showed many root galls, high number of eggs and J2, and Fusarium solani and Rhizoctonia solani root rot. The araçá species, P. cattleyanum ‘yellow’, P. friedrichsthalianum, and E. stipitata are resistant to M. enterolobii and can be tested as potential guava rootstocks.


2017 ◽  
Vol 63 (No. 8) ◽  
pp. 363-369
Author(s):  
Mikleš Milan ◽  
Helexa Milan ◽  
Mikleš Juraj

The issue of terrain conditions is very complex and its description is approached from different perspectives and with different objectives. Because it consists of the gathering of basic information for a mobile object, a wheeled forestry tractor, the terrain-vehicle approach was taken as the basis. Ground conditions are part of the operating conditions of wheeled forestry tractors. Uneven ground can be regarded as a source of vibration in the vehicle – towing truck. In this respect, given the random shape of the surface roughness, the solution to vibrations leads to a terrain correlation analysis in order to obtain a correlation function and power spectral density of the ground surface. Scanning of the ground micro-profile was performed using a device for quick terrain scanning, which from the mechanical aspect consists of a towing vehicle and a measuring carriage. Correlation function and power spectral density are the evaluation based on ground micro-profile measurements and the results of calculations. Measurements of forest terrain (road) micro-profile were done in the area of Little Fatra and Little Carpathians in Slovakia. In geological terms, the measurements were done in an area with the occurrence of gneiss, granite, limestone and flysch. No measurements were performed in a sandy area.


Sign in / Sign up

Export Citation Format

Share Document