scholarly journals Root canal treatment of mandibular second premolar tooth with taurodontism

2008 ◽  
Vol 136 (5-6) ◽  
pp. 280-283 ◽  
Author(s):  
Mirjana Vujaskovic ◽  
Branislav Karadzic ◽  
Vesna Miletic

INTRODUCTION Taurodontism is a morphoanatomical change in the shape of a tooth. An enlarged body of a tooth with smaller than usual roots is a characteristic feature. Internal tooth anatomy correlates with this appearance, which means that a taurodontal tooth has a large pulp chamber and apically positioned furcations. This dental anomaly may be associated with different syndromes and congenital discoders. CASE OUTLINE The case report presents the patient of a rare case of taurodontism in the mandibular second premolar with chronic periodontitis. Endodontic treatment was performed after dental history and clinical examination. Special care is required in all segments of endodontic treatment of a taurodontal tooth from the identification orifice, canal exploration, determining working length, cleaning and shaping and obturation of the root canal. Precurved K-file was used for canal exploration and location of the furcation. One mesial and one distal canal with the buccal position were identified in the apical third of the root canal. The working lengths of two canals were determined by radiographic interpretation with two K-files in each canal and verified with the apex locator. During canal instrumentation, the third canal was located in the disto-lingual position. The working length of the third canal was established using the apex locator. CONCLUSION Thorough knowledge of tooth anatomy and its variations can lead to lower percentage of endodontic failure. Each clinical case involving these teeth should be investigated carefully, clinically and radiographically to detect additional root canals. High quality radiographs from different angles and proper instrumentarium improve the quality of endodontic procedure.

2020 ◽  
Vol 1 (12) ◽  
pp. 40-42
Author(s):  
F. Yu. Daurova ◽  
D. I. Tomaeva ◽  
S. V. Podkopaeva ◽  
Yu. A. Taptun

Relevance: the reason for the development of complications in endodontic treatment is poor-quality instrumental treatment root canals.Aims: a study of the animicrobial action and clinical efficacy of high-frequency monopolar diathermocoagulation in the treatment of chronic forms of pulpitis.Materials and methods: 102 patients with various chronic forms of pulpitis were divided into three groups of 34 patients each. In the first two groups, high-frequency monopolar diathermocoagulation was used in endodontic treatment in different modes. In the third group, endodontic treatment was carried out without the use of diathermocoagulation (comparison group). The root canal microflora in chronic pulpitis in vivo was studied twice-before and after diathermocoagulation.Results: it was established that high-frequency monopolar diathermocoagulation in the effect mode is 3, power is 4 (4.1 W) and effect is 4, power is 4 (5.4 W) with an exposure time of 3 seconds, it has a pronounced antibacterial effect on all presented pathogenic microflora obtained from the root canals of the teeth.


PeerJ ◽  
2017 ◽  
Vol 5 ◽  
pp. e3583 ◽  
Author(s):  
Andreas Bartols ◽  
Bernt-Peter Robra ◽  
Winfried Walther

Background Reciproc instruments are the only contemporary root canal instruments where glide path preparation is no longer strictly demanded by the manufacturer. As the complete preparation of root canals is associated with success in endodontic treatment we wanted to assess the ability and find predictors for Reciproc instruments to reach full working length (RFWL) in root canals of maxillary molars in primary root canal treatment (1°RCTx) and retreatment (2°RCTx) cases. Methods This retrospective study evaluated 255 endodontic treatment cases of maxillary molars. 180 were 1°RCTx and 75 2°RCTx. All root canals were prepared with Reciproc instruments. The groups were compared and in a binary logistic regression model predictors for RFWL were evaluated. Results A total of 926 root canals were treated with Reciproc without glide path preparation. This was possible in 885 canals (95.6%). In 1°RCTx cases 625 of 649 (96.3%) canals were RFWL and in 2°RCTx cases 260 of 277 (93.9%). In second and third mesiobuccal canals (MB2/3) 90 out of 101 (89.1%) were RFWL with Reciproc in 1°RCTx and in the 2°RCTx treatment group 49 out of 51 cases (96.1%). In mesio-buccal (MB1) canals “2°RCTx” was identified as negative predictor for RFWL (OR 0.24 (CI [0.08–0.77])). In MB2/3 canals full working length was reached less often (OR 0.04 (CI [0.01–0.31])) if the tooth was constricted and more often if MB2/3 and MB1 canals were convergent (OR 4.60 (CI [1.07–19.61])). Discussion Using Reciproc instruments, the vast majority of root canals in primary treatment and retreatment cases can be prepared without glide path preparation.


2016 ◽  
Vol 17 (11) ◽  
pp. 902-906
Author(s):  
Mateus R Tonetto ◽  
EM Maia Filho ◽  
RM dos Reis Santos ◽  
Darlon M Lima ◽  
SM da Silva Pereira ◽  
...  

ABSTRACT Introduction The study aimed to compare the shaping and preservation of the original curvature of simulated curved root canals using the following instruments: Reciproc (Rcp), WaveOne (Wo), and the ProTaper Next system (Ptn). Materials and methods A total of 45 resin blocks with simulated curved root canals were divided into three groups (n = 15), prepared using the Rcp (R25), Wo (25/0.8), and Ptn (X2) instruments. Standardized photographs were taken before and after canal instrumentation. After the superimposition of the images, the amount of resin removed from the curvature's inner and outer walls was measured at six apical levels, at intervals of 1 mm. The canals’ angles of curvature before and after instrumentation were subtracted. Results There were no significant differences between the instruments in terms of the total amount of resin removed of the inner or outer walls of the apical curvature (p > 0.05). The Rcp instruments provided the best resin removed ratios between the walls. The means of the change in angle were as follows: Wo = 2.15°, Ptn = 0.92°, and Rcp = 0.21°. WaveOne caused significantly higher deviations than Rcp. Conclusion All of the instruments demonstrated a tendency to straighten the simulated root canal. Instruments that use rotary movement achieved an effect similar to that of the reciprocating instruments in relation to change in angle. Clinical significance Deviations from the original shape of the root canal could have a negative impact on the quality of a filling and consequently on the success of the endodontic treatment. How to cite this article Maia Filho EM, dos Reis Santos RM, Lima DM, da Silva Pereira SM, Soares JA, de Jesus Tavarez RR, Ferreira MC, Carvalho CN, Bandeca MC, Tonetto MR, Borges AH, de Castro Rizzi C. Shaping Ability of ProTaper Next, WaveOne, and Reciproc in Simulated Root Canals. J Contemp Dent Pract 2016;17(11):902-906.


2014 ◽  
Vol 142 (9-10) ◽  
pp. 592-596 ◽  
Author(s):  
Igor Stojanac ◽  
Milica Premovic ◽  
Milan Drobac ◽  
Bojana Ramic ◽  
Ljubomir Petrovic

Introduction. Predictable endodontic treatment depends on the dentist?s knowledge about root canal morphology and its possible anatomic variations. The majority of mandibular canines have one root and root canal, but 15% may have two canals and a smaller number may have two distinct roots. The following clinical reports describe endodontic treatment of mandibular canines with two roots and two root canals. Outline of Cases. Four clinical case reports are presented to exemplify anatomical variation in the human mandibular canine. Detailed analysis of the preoperative radiographs and careful examination of the pulp chamber floor detected the presence of two root canal orifices in all canines. Working length was determined with an electronic apex locator and biomechanical preparation was carried out by using engine driven BioRaCe Ni-Ti rotary instruments in a crown-down manner, followed by copious irrigation with 1% sodium hypochlorite. Definitive obturation was performed using cold lateral condensation with gutta-percha cones and Top Seal paste. The treatment outcome was evaluated using postoperative radiographs. Conclusion. Endodontists should be aware of anatomical variations of the treated teeth, and should never presume that canal systems are simple.


Author(s):  
Beethoven Estevão COSTA ◽  
Giovanna Morais de LIMA ◽  
Stéphanie Quadros TONELLI ◽  
Eduardo NUNES ◽  
Frank Ferreira SILVEIRA

ABSTRACT Objective: The purpose of this study was to evaluate the incidence of endodontic treatment and the quality of root canal fillings in Brazilian undergraduate dental students. The study was similar those conducted 10, 20, 30, and 40 years earlier. Methods: A total of 407 undergraduate dental students were evaluated by using questionnaires to identify endodontic treatments, with each treatment being radiographed for the analysis of the presence of a periapical radiolucency and the quality of the root canal filling. Results: Forty root canal fillings were found: 32 (80%) completely filled, seven (17.5%) incompletely filled, and one (2.5%) overfilled. Conclusion: This study showed a low prevalence of endodontic treatment in dentistry students, and the evaluated root canals that were filled were high quality, with few cases suggesting periapical lesions.


2021 ◽  
Vol 10 (15) ◽  
pp. e174101522849
Author(s):  
Anna Elisa Souza Simeão ◽  
Maria Clara Santos Silva ◽  
Edeilton Santana de Oliveira Júnior e Bezerra ◽  
Caio Cesar Souza ◽  
Adolfo de Matos de Carvalho ◽  
...  

Objective: The cleaning and shaping of root canals is undeniably a step of great importance for the success of endodontic treatment. With the aim of optimizing the time and quality of this step, numerous instruments of different materials and shapes have been developed over the years. One of these instruments was nickel-titanium files, which have greater flexibility and resistance, allowing a better prognosis for endodontic treatment. In this study, two endodontic files, Reciproc Blue and V-File, were compared with the aim of evaluating their performance after the third use. Materials and methods: 60 acrylic blocks wrapped with laminated paper and filled with Nankin ink were used. Instrumentation was performed with an endodontic engine, by an experienced operator. After instrumentation, the blocks were photographed so that the photographs were superimposed. Results: After statistical analysis, it was found that there was no significant difference in the performance of the two groups after the third use. Conclusion: There was no significant difference between the two studied groups, and both are safe for the preparation of curved canals, but it is necessary that the manufacturer's recommendation is followed, regarding the number of canals instrumented with the same file.


2018 ◽  
Vol 6 (3) ◽  
pp. 46 ◽  
Author(s):  
Andreas Bartols ◽  
David Christofzik ◽  
Matthias Krummel ◽  
Christian Friedrichs ◽  
Tim Pousset ◽  
...  

This study investigated which preparation strategy for root canals leads to the best technical preparation quality, and moreover, which is perceived to be performed best by novice students. Sixty-four students were recruited to prepare one simulated root canal with each of the following: FlexMaster files (F), Mtwo files (M), and Reciproc files (R). After preparation, the students assessed the different instrument systems through a questionnaire. The technical quality of the root canal preparations was evaluated by the centering ratio of the preparation. A total of 186 prepared root canals were submitted for evaluation. With R, significantly better centered preparations were achieved when compared to M and F (p < 0.001). The students evaluated R faster than M and F, and evaluated F significantly (p < 0.05) slower than R and M. M was rated as the easiest system to learn and to handle, as well as the best at reaching the working length; therefore, it was evaluated as the overall favorite of the students. A difference was found between the students’ perceptions and their achieved technical quality of root canal preparations.


2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Bestoon Mohammed Faraj

Abstract Background Radiographic analysis of tooth morphology is mandatory for accurate calibration of the degree of canal curvature angle and radiographic working length to its real dimensions in case difficulty assessment protocols. This study aimed to determine the impact of the degree of root canal curvature angle on maintaining the real working length and the original canal axis of prepared root canals using a reciprocating rotary instrumentation technique. Methods Radiographic image analysis was performed on 60 extracted single-rooted human premolar teeth with a moderate canal curvature (10°–25°) and severe canal curvature (26°–70°). Working length and longitudinal canal axis were determined using cone-beam computed tomography (CBCT) and digital periapical radiography. The real canal length was determined by subtracting 0.5 mm from the actual canal length. Root canals were prepared using the WaveOne Gold reciprocating file (Dentsply Maillefer, Ballaigues, Switzerland). Results There was no significant relation of the degree of canal curvature angle to the accuracy of radiographic working length estimated on CBCT and digital periapical radiographic techniques (P > 0.05). Postinstrumentation changes in the original canal axis between moderate and severe canal curvature angles, assessed on CBCT and periapical digital radiographic images were statistically non-significant (P > 0.05). Conclusions A standardized digital periapical radiographic method performed similarly to the CBCT technique near to its true working length. No significant interaction exists between the diagnostic working length estimation, postoperative root canal axis modification, and the degree of canal curvature angle, using reciprocating rotary instrumentation technique.


2008 ◽  
Vol 55 (4) ◽  
pp. 221-228
Author(s):  
Violeta Pavlovic ◽  
Slavoljub Zivkovic

Aim: To evaluate the effect of irrigation techniques, i.e. different types of irrigation needles, on the quality of cleaning of root canal walls using scanning electron microscopy (SEM). Material and Method: The study was conducted on 16 extracted, single-rooted, human teeth. The samples were allocated to two experimental groups depending on the type of the irrigation needle. Conventional needles were used for the irrigation of Group I and laterally perforated ones for Group II. All root canals were instrumented using K files and the Step-back technique. During instrumentation, all samples were irrigated with 2.5 % sodium hypochlorite solution followed by final irrigation with 17 % EDTA for 1 min. After that, all samples were irrigated with 10 ml of distilled water. The roots were, then, sectioned longitudinally and middle one third of each root canal was analyzed using SEM. Quantitative analysis was based on criteria by H?lsmann et al. Results: The obtained results showed that the more efficient removal of debris and the smear layer was accomplished in the group of samples irrigated using laterally perforated needles than conventional needles. The difference between the investigated irrigation techniques were statistically significant (p<0.01). Conclusion: The use of laterally perforated needles for irrigation allows more efficient cleaning of root canal walls, i.e. the removal of debris and the smear layer.


2020 ◽  
Vol 73 (6) ◽  
pp. 1145-1148
Author(s):  
Maryna A. Goray ◽  
Nataliia G. Gadzhula ◽  
Olena V. Muntian ◽  
Olena L. Cherepakha ◽  
Larysa F. Kurdysh

The aim: To compare the quality of root canal system preparation with the use of manual K-files, machine Protaper Universal and Silk files by in vitro studies. Materials and methods: Root canals preparation in 45 extracted premolars was performed in three groups with 15 teeth in each with K-files, Protaper Universal and Silk files. Transverse sections of the dental root were prepared. Histologically were assessed: amount of sawdust and predentin remaining, the purity degree of root canal walls. Results: When calculating the sawdust amount at the distance of 3 mm from an apex, a high degree of contamination was observed in the manual K-file group: 53.3% versus 33.3% in the Protaper Universal group and against 20.0% in the Silk file group. The amount of predentin after root canal treatment with manual files reached 25-30%. At the distance of 5 mm from the apex the root canals with high and medium purity degree were detected in 86.7% with Silk files and 80.0% with Protaper Universal files used. All predentin was removed when working with Protaper Universal and Silk files. Conclusions: In the histological sections of the root canals treated with K-files, the larger amount of dentine particles and predentin has been revealed than when using machine tools. The largest amount of predentin and dentine were removed with Protaper Universal files. Silk endodontic system is better for treatment of the root canals dentine surface in the apical area compared to Protaper Universal and K-files.


Sign in / Sign up

Export Citation Format

Share Document