Scanning Electron Microscopy of Drosophila Mutant and Wild Type Eyes

1972 ◽  
Vol 91 (4) ◽  
pp. 600 ◽  
Author(s):  
Irwin I. Oster ◽  
Richard E. Crang
Blood ◽  
2009 ◽  
Vol 114 (22) ◽  
pp. 3062-3062
Author(s):  
Justin Barr ◽  
Jennifer Barr ◽  
Marielle Meurice ◽  
David Motto

Abstract Abstract 3062 Poster Board II-1038 VWF is a large plasma glycoprotein required for normal hemostasis, and performs its function through binding to coagulation Factor VIII, and via interactions with both platelet surface glycoproteins and the activated and/or damaged vascular surface. We have developed a scanning electron microscopy (SEM) protocol to visualize endothelial damage and thrombus formation in wild-type and VWF-deficient mice. Thrombus formation is initiated by ferric chloride, and subsequently at defined time points, the circulation is rapidly flushed and aldehyde fixed. The carotid artery is removed, externally fixed, sectioned (both longitudinally and in cross-section), processed for SEM, and visualized. With this protocol we have obtained high-quality images (exceeding 100,000x) of FeCl3-induced endothelial damage and thrombus formation in C57BL/6 and VWF-deficient mice at baseline, and at 30, 60, 90, 120, 240, and 300 seconds post-injury (please access http://sites.google.com/site/mottolab/ to view images). Interestingly, we find that FeCl3 induces little, if any, endothelial denudation and collagen exposure at these time points, with the endothelium clearly appearing changed from baseline, but not damaged. Thus, initial platelet adhesion seems to be occurring in the absence of collagen exposure in this model. In wild-type mice, platelets adhere rapidly to the endothelial surface and assume a cross-linked appearance by 90 seconds, with continual inward growth of the thrombus through the 300 second time point. In VWF-deficient mice, platelets also adhere rapidly to the endothelial surface, but in contrast, remain recognizable longer without assuming a highly-activated phenotype. Compared with wild-type, at all time points examined the VWF-deficient thrombus appears smaller with considerably less cross-linking and platelet activation. Interestingly, during the course of these experiments we also have identified what appears to be red blood cells (RBCs) participating in thrombus formation. Similar to platelets, RBCs interact directly with the endothelial surface, and subsequently become elongated in the direction of blood flow. These elongated RBCs are often observed to cluster and bind platelets, with the subsequent formation of large platelet-erythrocyte complexes. Further characterization of these complexes and the role they may play in thrombus formation is currently in progress. Additionally, similar SEM studies are underway with both ADAMTS13-deficient and GPIb alpha-deficient mice, and with mice transiently expressing in vivo biotinylated VWF for visualization of this molecule at high magnification and resolution. These studies should help better define the mechanisms of endothelial activation and thrombus formation as they occur in situ. Disclosures No relevant conflicts of interest to declare.


2010 ◽  
Vol 108 (1) ◽  
pp. 61-66 ◽  
Author(s):  
Bryan B. Hsu ◽  
Sze Yinn Wong ◽  
Paula T. Hammond ◽  
Jianzhu Chen ◽  
Alexander M. Klibanov

N,N-Dodecyl,methyl-polyethylenimine coatings applied to solid surfaces have been shown by us to disinfect aqueous solutions of influenza viruses. Herein we elucidate the mechanism of this phenomenon. Infectivity-, protein-, RNA-, and scanning electron microscopy-based experiments reveal that, upon contact with the hydrophobic polycationic coating, influenza viruses (including pathogenic human and avian, both wild-type and drug-resistant, strains) irreversibly adhere to it, followed by structural damage and inactivation; subsequently, viral RNA is released into solution, while proteins remain adsorbed.


F1000Research ◽  
2019 ◽  
Vol 8 ◽  
pp. 198 ◽  
Author(s):  
Peter Wild ◽  
Sabine Leisinger ◽  
Anna Paula de Oliveira ◽  
Jana Doehner ◽  
Elisabeth M. Schraner ◽  
...  

Background: Capsids of herpes simplex virus 1 (HSV-1) are assembled in the nucleus, translocated either to the perinuclear space by budding at the inner nuclear membrane acquiring tegument and envelope, or released to the cytosol in a “naked” state via impaired nuclear pores that finally results in impairment of the nuclear envelope. The Us3 gene encodes a protein acting as a kinase, which is responsible for phosphorylation of numerous viral and cellular substrates. The Us3 kinase plays a crucial role in nucleus to cytoplasm capsid translocation. We thus investigate the nuclear surface in order to evaluate the significance of Us3 in maintenance of the nuclear envelope during HSV-1 infection.Methods: To address alterations of the nuclear envelope and capsid nucleus to cytoplasm translocation related to the function of the Us3 kinase we investigated cells infected with wild type HSV-1 or the Us3 deletion mutant R7041(∆Us3) by transmission electron microscopy, focused ion-beam electron scanning microscopy, cryo-field emission scanning electron microscopy, confocal super resolution light microscopy, and polyacrylamide gel electrophoresis.Results: Confocal super resolution microscopy and cryo-field emission scanning electron microscopy revealed decrement in pore numbers in infected cells. Number and degree of pore impairment was significantly reduced after infection with R7041(∆Us3) compared to infection with wild type HSV-1. The nuclear surface was significantly enlarged in cells infected with any of the viruses. Morphometric analysis revealed that additional nuclear membranes were produced forming multiple folds and caveolae, in which virions accumulated as documented by three-dimensional reconstruction after ion-beam scanning electron microscopy. Finally, significantly more R7041(∆Us3) capsids were retained in the nucleus than wild-type capsids whereas the number of R7041(∆Us3) capsids in the cytosol was significantly lower.Conclusions: The data indicate that Us3 kinase is involved in facilitation of nuclear pore impairment and, concomitantly, in capsid release through impaired nuclear envelope.


2011 ◽  
Vol 9 (2) ◽  
pp. 357-360 ◽  
Author(s):  
Riccardo Bovina ◽  
Valentina Talamè ◽  
Matteo Ferri ◽  
Roberto Tuberosa ◽  
Beata Chmielewska ◽  
...  

In this study, a forward-genetics analysis was performed on a portion of TILLMore, a chemically mutagenized population of barley cv. ‘Morex’ (http://www.distagenomics.unibo.it/TILLMore/), to identify root morphology alterations by comparison with ‘Morex’ wild-type. For this purpose, a simple paper-roll approach was performed to identify phenotypic variants at the seedling stage. The analysis of c. 1000 M4 families allowed us to identify c. 70 lines with altered root morphology. A more accurate phenotypic characterization of a portion of the mutant lines has been performed using stereomicroscopy and a scanning electron microscopy approach.


Author(s):  
P.S. Porter ◽  
T. Aoyagi ◽  
R. Matta

Using standard techniques of scanning electron microscopy (SEM), over 1000 human hair defects have been studied. In several of the defects, the pathogenesis of the abnormality has been clarified using these techniques. It is the purpose of this paper to present several distinct morphologic abnormalities of hair and to discuss their pathogenesis as elucidated through techniques of scanning electron microscopy.


Author(s):  
P.J. Dailey

The structure of insect salivary glands has been extensively investigated during the past decade; however, none have attempted scanning electron microscopy (SEM) in ultrastructural examinations of these secretory organs. This study correlates fine structure by means of SEM cryofractography with that of thin-sectioned epoxy embedded material observed by means of transmission electron microscopy (TEM).Salivary glands of Gromphadorhina portentosa were excised and immediately submerged in cold (4°C) paraformaldehyde-glutaraldehyde fixative1 for 2 hr, washed and post-fixed in 1 per cent 0s04 in phosphosphate buffer (4°C for 2 hr). After ethanolic dehydration half of the samples were embedded in Epon 812 for TEM and half cryofractured and subsequently critical point dried for SEM. Dried specimens were mounted on aluminum stubs and coated with approximately 150 Å of gold in a cold sputtering apparatus.Figure 1 shows a cryofractured plane through a salivary acinus revealing topographical relief of secretory vesicles.


Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).


Author(s):  
Ronald H. Bradley ◽  
R. S. Berk ◽  
L. D. Hazlett

The nude mouse is a hairless mutant (homozygous for the mutation nude, nu/nu), which is born lacking a thymus and possesses a severe defect in cellular immunity. Spontaneous unilateral cataractous lesions were noted (during ocular examination using a stereomicroscope at 40X) in 14 of a series of 60 animals (20%). This transmission and scanning microscopic study characterizes the morphology of this cataract and contrasts these data with normal nude mouse lens.All animals were sacrificed by an ether overdose. Eyes were enucleated and immersed in a mixed fixative (1% osmium tetroxide and 6% glutaraldehyde in Sorenson's phosphate buffer pH 7.4 at 0-4°C) for 3 hours, dehydrated in graded ethanols and embedded in Epon-Araldite for transmission microscopy. Specimens for scanning electron microscopy were fixed similarly, dehydrated in graded ethanols, then to graded changes of Freon 113 and ethanol to 100% Freon 113 and critically point dried in a Bomar critical point dryer using Freon 13 as the transition fluid.


Author(s):  
Jane A. Westfall ◽  
S. Yamataka ◽  
Paul D. Enos

Scanning electron microscopy (SEM) provides three dimensional details of external surface structures and supplements ultrastructural information provided by transmission electron microscopy (TEM). Animals composed of watery jellylike tissues such as hydras and other coelenterates have not been considered suitable for SEM studies because of the difficulty in preserving such organisms in a normal state. This study demonstrates 1) the successful use of SEM on such tissue, and 2) the unique arrangement of batteries of nematocysts within large epitheliomuscular cells on tentacles of Hydra littoralis.Whole specimens of Hydra were prepared for SEM (Figs. 1 and 2) by the fix, freeze-dry, coat technique of Small and Màrszalek. The specimens were fixed in osmium tetroxide and mercuric chloride, freeze-dried in vacuo on a prechilled 1 Kg brass block, and coated with gold-palladium. Tissues for TEM (Figs. 3 and 4) were fixed in glutaraldehyde followed by osmium tetroxide. Scanning micrographs were taken on a Cambridge Stereoscan Mark II A microscope at 10 KV and transmission micrographs were taken on an RCA EMU 3G microscope (Fig. 3) or on a Hitachi HU 11B microscope (Fig. 4).


Author(s):  
J.N. Ramsey ◽  
D.P. Cameron ◽  
F.W. Schneider

As computer components become smaller the analytical methods used to examine them and the material handling techniques must become more sensitive, and more sophisticated. We have used microbulldozing and microchiseling in conjunction with scanning electron microscopy, replica electron microscopy, and microprobe analysis for studying actual and potential problems with developmental and pilot line devices. Foreign matter, corrosion, etc, in specific locations are mechanically loosened from their substrates and removed by “extraction replication,” and examined in the appropriate instrument. The mechanical loosening is done in a controlled manner by using a microhardness tester—we use the attachment designed for our Reichert metallograph. The working tool is a pyramid shaped diamond (a Knoop indenter) which can be pushed into the specimen with a controlled pressure and in a specific location.


Sign in / Sign up

Export Citation Format

Share Document