scholarly journals Clinical Evaluation of Bracket Bonding Using Two Different Polymerization Sources

2008 ◽  
Vol 78 (5) ◽  
pp. 922-925 ◽  
Author(s):  
Nikolaos S. Koupis ◽  
Theodore Eliades ◽  
Athanasios E. Athanasiou

Abstract Objective: To comparatively assess clinical failure rate of brackets cured with two different photopolymerization sources after nine months of orthodontic treatment. Materials and Methods: The sample of this study comprised 30 patients who received comprehensive orthodontic treatment by means of fixed appliances. Using the same adhesive, 600 stainless steel brackets were directly bonded and light cured for 10 seconds with the light-emitting diode (LED) lamp or for 20 seconds with the conventional halogen lamp. A split-mouth design randomly alternated from patient to patient was applied. Failure rates were recorded for nine months and analyzed with Pearson χ2 test, and log-rank test at α = .05 level of significance. Results: The overall failure rate recorded with the halogen unit (3.33%) was not significantly different from the failure rate for the LED lamp (5.00%). Significantly more failures were found in boys compared with girls, in the mandibular dental arch compared with the maxillary arch, and in posterior segments compared with anterior segments. However, no significant difference was found between the right and left segments. Conclusion: Both light-curing units showed sufficiently low bond failure rates. LED curing units are an advantageous alternative to conventional halogen sources in orthodontics because they enable a reduced chair-time bonding procedure without significantly affecting bond failure rate.

1970 ◽  
Vol 29 (2) ◽  
Author(s):  
Zuber Ahamed Naqvi ◽  
Saleem Shaikh ◽  
Zameer Pasha

BACKGROUND: Bonding is an important step in fixed orthodontic mechanotherapy. Many new materials introduced an adhesive for bonding. This study was designed to evaluate the clinical bond failure rate of orthodontic brackets bonded with green glue: two way color changes adhesive and transbond XT adhesive paste.METHODS: Eighteen male patients with a mean age of 16 years were included in the study. Convenience sampling technique was used to select the sample for this study. The split-mouth design was used to bond 360 brackets by one operator and both adhesives were used in each patient. Bond failure rates were estimated with respect to bonding procedure, dental arch, tooth type (incisor, canine, and premolar). The results were evaluated using the chisquare test. Kaplan – Meier analysis and the log rank test were used to estimate the survival rate of the brackets. Bracket failure rates for each system were analyzed, and failure causes as reported by the patients and the quadrant of each tooth in which bracketsfailed were recorded.RESULTS: The bond failure rate was 5.00% and 4.44% for green gloo and transbond XT group. No significant difference was found in the bond failure rate between transbond XT and Green gloo group. No significant difference was found in the bond failure rate between the two groups, in relation to right and left side and the type of teeth.CONCLUSION: Green gloo adhesive can be effectively used to bond orthodontic brackets.


2012 ◽  
Vol 23 (4) ◽  
pp. 399-402 ◽  
Author(s):  
Fábio Lourenço Romano ◽  
Rodrigo Alexandre Valério ◽  
Jaciara Miranda Gomes-Silva ◽  
José Tarcísio Lima Ferreira ◽  
Gisele Faria ◽  
...  

The purpose of the present study was to evaluate in vivo the failure rate of metallic brackets bonded with two orthodontic composites. Nineteen patients with ages ranging from 10.5 to 38.7 years needing corrective orthodontic treatment were selected for study. The enamel surfaces from second premolars to second premolars were treated with Transbond Plus-Self Etching Primer (3M Unitek). Next, 380 orthodontic brackets were bonded on maxillary and mandibular teeth, as follows: 190 with Transbond XT composite (3M Unitek) (control) and 190 with Transbond Plus Color Change (3M Unitek) (experimental) in contralateral quadrants. The bonded brackets were light cured for 40 s, and initial alignment archwires were inserted. Bond failure rates were recorded over a six-month period. At the end of the evaluation, six bond failures occurred, three for each composite. Kaplan-Meyer method and log-rank test (Mantel-Cox) was used for statistical analysis, and no statistically significant difference was found between the materials (p=0.999). Both Transbond XT and Transbond Plus Color Change composites had low debonding rates over the study period.


2008 ◽  
Vol 78 (5) ◽  
pp. 935-940 ◽  
Author(s):  
Davide Mirabella ◽  
Raffaele Spena ◽  
Giovanni Scognamiglio ◽  
Lombardo Luca ◽  
Antonio Gracco ◽  
...  

Abstract Objective: To test the hypothesis that bonding with a blue light-emitting diode (LED) curing unit produces no more failures in adhesive-precoated (APC) orthodontic brackets than bonding carried out by a conventional halogen lamp. Materials and Methods: Sixty-five patients were selected for this randomized clinical trial, in which a total of 1152 stainless steel APC brackets were employed. In order to carry out a valid comparison of the bracket failure rate following use of each type of curing unit, each patient's mouth was divided into four quadrants. In 34 of the randomly selected patients, designated group A, the APC brackets of the right maxillary and left mandibular quadrants were bonded using a halogen light, while the remaining quadrants were treated with an LED curing unit. In the other 31 patients, designated group B, halogen light was used to cure the left maxillary and right mandibular quadrants, whereas the APC brackets in the remaining quadrants were bonded using an LED dental curing light. The bonding date, the type of light used for curing, and the date of any bracket failures over a mean period of 8.9 months were recorded for each bracket and, subsequently, the chi-square test, the Yates-corrected chi-square test, the Fisher exact test, Kaplan-Meier survival estimates, and the log-rank test were employed in statistical analyses of the results. Results: No statistically significant difference in bond failure rate was found between APC brackets bonded with the halogen light-curing unit and those cured with LED light. However, significantly fewer bonding failures were noted in the maxillary arch (1.67%) than in the mandibular arch (4.35%) after each light-curing technique. Conclusions: The hypothesis cannot be rejected since use of an LED curing unit produces similar APC bracket failure rates to use of conventional halogen light, with the advantage of a far shorter curing time (10 seconds).


2008 ◽  
Vol 78 (6) ◽  
pp. 1095-1100 ◽  
Author(s):  
Selma Elekdag-Turk ◽  
Fethiye Cakmak ◽  
Devrim Isci ◽  
Tamer Turk

Abstract Objective: To compare the clinical performance of a self-etching primer (SEP) with a conventional two-step etch and primer method (CM). Materials and Methods: Study subjects were 39 patients with a mean age of 15 years 7 months. Six hundred and eighty-eight brackets were bonded by one operator with a split-mouth design, using Transbond Plus Self-Etching Primer or a conventional two-step etch and primer (Transbond XT). The survival rate of the brackets was estimated by the Kaplan-Meier analysis. Bracket survival distributions with respect to bonding procedure, dental arch, type of tooth (incisor, canine, and premolar) and patients' gender were compared using the log-rank test. Bond failure interface was determined using the Adhesive Remnant Index (ARI). Results: The bond failure rates of SEP and CM were 4.7% and 1.7%, respectively. A significant difference was found between the bonding procedures using the log-rank test (P < .05). Furthermore, canine and premolar teeth displayed a lower survival rate than incisor teeth (P < .05). Survival rates did not show significant differences between the upper and lower dental arches and patients' gender (P > .05). No significant difference was observed for ARI scores (P > .05). Conclusion: These findings indicate that the SEP (Transbond Plus) can be effectively used to bond orthodontic brackets.


2017 ◽  
Vol 22 (2) ◽  
pp. 69-76 ◽  
Author(s):  
Sindhuja Krishnan ◽  
Saravana Pandian ◽  
R. Rajagopal

ABSTRACT INTRODUCTION: The use of flowable composites as an orthodontic bonding adhesive merits great attention because of their adequate bond strength, ease of clinical handling and reduced number of steps in bonding. OBJECTIVE: The aim of this Randomized Controlled Trial was to comparatively evaluate over a 6-month period the bond failure rate of a flowable composite (Heliosit Orthodontic, Ivoclar Vivadent AG, Schaan) and a conventional orthodontic bonding adhesive (Transbond XT, 3M Unitek). METHODS: 53 consecutive patients (23 males and 30 females) who fulfilled the inclusion and exclusion criteria were included in the study. A total of 891 brackets were analyzed, where 444 brackets were bonded using Heliosit Orthodontic and 447 brackets were bonded using Transbond XT. The survival rates of brackets were estimated with the Kaplan-Meier analysis. Bracket survival distributions for bonding adhesives, tooth location and dental arch were compared with the log-rank test. RESULTS: The failure rates of the Transbond XT and the Heliosit Orthodontic groups were 8.1% and 6% respectively. No significant differences in the survival rates were observed between them (p= 0.242). There was no statistically significant difference in the bond failure rates when the clinical performance of the maxillary versus the mandibular arches and the anterior versus the posterior segments were compared. CONCLUSIONS: Both systems had clinically acceptable bond failure rates and are adequate for orthodontic bonding needs.


2017 ◽  
Vol 45 (9) ◽  
pp. 2098-2104 ◽  
Author(s):  
Jorge Chahla ◽  
Chase S. Dean ◽  
Lauren M. Matheny ◽  
Justin J. Mitchell ◽  
Mark E. Cinque ◽  
...  

Background: Limited evidence exists for meniscal repair outcomes in a multiligament reconstruction setting. Purpose/Hypothesis: The purpose of this study was to assess outcomes and failure rates of meniscal repair in patients who underwent multiligament reconstruction compared with patients who underwent multiligament reconstruction but lacked meniscal tears. The authors hypothesized that the outcomes of meniscal repair associated with concomitant multiligament reconstruction would significantly improve from preoperatively to postoperatively at a minimum of 2 years after the index surgery. Secondarily, they hypothesized that this cohort would demonstrate similar outcomes and failure rates compared with the cohort that did not have meniscal lesions at the time of multiligament reconstruction. Study Design: Cohort study; Level of evidence, 3. Methods: Inclusion criteria for the study included radiographically confirmed skeletally mature patients of at least 16 years of age who underwent multiligamentous reconstruction of the knee without previous ipsilateral osteotomy, intra-articular infections, or intra-articular fractures. Patients were included in the experimental group if they underwent inside-out meniscal suture repair with concurrent multiligament reconstruction. Those included in the control group (multiligament reconstruction without a meniscal tear) underwent multiligament reconstruction but did not undergo any type of meniscal surgery. Lysholm, Western Ontario and McMaster Universities Osteoarthritis Index, Short Form–12 physical component summary and mental component summary, Tegner activity scale, and patient satisfaction scores were recorded preoperatively and postoperatively. The failure of meniscal repair was defined as a retear of the meniscus that was confirmed arthroscopically. Results: There were 43 patients (16 female, 27 male) in the meniscal repair group and 62 patients (25 female, 37 male) in the control group. Follow-up was obtained in 93% of patients with a mean of 3.0 years (range, 2.0-4.7 years). There was a significant improvement between all preoperative and postoperative outcome scores ( P < .05) for both groups. The meniscal repair group had significantly lower preoperative Lysholm and Tegner scores ( P = .009 and P = .02, respectively). There were no significant differences between any other outcome scores preoperatively. The failure rate of the meniscal repair group was 2.7%, consisting of 1 symptomatic meniscal retear. There was no significant difference in any postoperative outcome score at a minimum 2-year follow-up between the 2 groups. Conclusion: Good to excellent patient-reported outcomes were reported for both groups with no significant differences in outcomes between the cohorts. Additionally, the failure rate for inside-out meniscal repair with concomitant multiligament reconstruction was low, regardless of meniscus laterality and tear characteristics. The use of multiple vertical mattress sutures and the biological augmentation resulting from intra-articular cruciate ligament reconstruction tunnel reaming may be partially responsible for the stability of the meniscal repair construct and thereby contribute to the overall improved outcomes and the low failure rate of meniscal repair, despite lower preoperative Lysholm and Tegner scores in the meniscal repair group.


2019 ◽  
Vol 45 (1) ◽  
pp. 29-34
Author(s):  
Li-ching Chang ◽  
I-ming Tsai

The present study compared early dental implant failure rates between patients with and without orthodontic treatment before dental implantation. The data of adults who had undergone dental implantation between January 2007 and December 2016 were analyzed retrospectively. A total of 124 subjects with 255 implants were divided into a treatment group (46 subjects, 85 teeth) consisting of patients who had undergone implant surgery after orthodontic treatment and a control group of patients who had not undergone preimplant orthodontic treatment. Implants that failed before permanent crown fabrication were defined as failures. No significant differences in gender or age were found between the treatment group and controls. No significant differences were found in implant failure rates in either jaw between the treatment and control groups. However, the failure rate was still higher in the treatment group (14.81%) than in the control group (3.28%) for the maxilla. Results of this study demonstrate an increased implant failure rate only in the maxilla of patients who underwent orthodontic treatment before dental implantation, especially implant surgery combined with a sinus lift procedure. Further study with a larger sample size and longer follow-up period is necessary to confirm results of the present study and identify other confounding factors.


2013 ◽  
Vol 6 (4) ◽  
pp. 266 ◽  
Author(s):  
Darby Cassidy ◽  
Keith Jarvi ◽  
Ethan Grober ◽  
Kirk Lo

Introduction: Varicocele remains the most commonly identifiedcorrectable cause of male factor infertility. Surgical correction isthe most commonly performed technique to treat varicoceles with a technical failure rate of less than 5%. An attractive alternative to surgery is the selective catheterization and embolization of the gonadal vein. This data are limited by small series.Methods: We reviewed a total of 158 patients. These patientsunderwent embolization for clinical varicoceles and male factorinfertility between 2004 and 2008. Of these, 56% underwentattempted bilateral embolization, 43% unilateral left-sided embolization and 1.3% unilateral right-sided embolization.Results: Of these patients who underwent attempted bilateralembolization, 19.3% did not experience a successful obliterationof the right gonadal vein and 2.3% (2/88) experienced a failure rate in the embolization of the left gonadal vein. Of the 2 attempts at unilateral right-sided embolization, there were no failures. Of the 68 unilateral left-sided embolization attempts, there was a 4.4% failure rate. Of all of the right-sided embolization attempts, 18.9% failed, while 3.2% of the left-sided attempts failed.Conclusion: This review represents the largest contemporary series of varicocele embolization outcomes currently in the literature. Our 19.3% technical failure rate for bilateral varicocele embolization is higher than the current published rate of 13% and is largely related to failure to successfully occlude the right gonadal vein. This supports our belief that bilateral varicoceles are best managed with a primary microsurgical approach, where technical failure rates are expected to be less than 5% based on published data. Men withunilateral left-sided varicoceles should be offered both options as they have similar failure rates, but with embolization offering some clear advantages to the patient.


Blood ◽  
2006 ◽  
Vol 108 (11) ◽  
pp. 5222-5222
Author(s):  
John F. DiPersio ◽  
Angela Smith ◽  
Dianne Sempek ◽  
Albert Baker ◽  
Steven Jiang ◽  
...  

Abstract Background: High-dose chemotherapy with autologous stem cell transplantation (ASCT) is a widely used treatment strategy in lymphoma and myeloma; however, no standard approach for the mobilization of peripheral hematologic stem and progenitor cells (HSPCs) has been established. Levels of circulating CD34+ cells, a surrogate marker for mobilization efficiency, vary widely between pts, and may be influenced by disease state, prior therapy, and/or mobilization regimen. Methods: The Washington University (St. Louis, MO) transplantation database includes clinical parameters from 407 multiple myeloma (MM), 562 non-Hodgkin’s Lymphoma (NHL), and 164 Hodgkin’s disease (HD) pts who received an ASCT between 1995 and 2006. A retrospective analysis of this large (1133 pts) population was conducted to determine factors associated with mobilization efficiency. Mobilization failure was defined as collection of < 2 × 10^6 CD34+ cells/kg within 5 apheresis days. Statistical analysis included analysis of variance (ANOVA) with Scheffe Test to determine differences in mobilization between the various mobilization regimens (G-CSF, G-CSF/chemotherapy, G-/GM-CSF, G-CSF/AMD3100). Results: All pts were included in the analysis; 87% received G-CSF alone as the initial mobilization regimen. Mobilization failure rates are summarized in Table 1. NHL and HD pts had an approx. 4-fold higher failure rate than MM pts. The combination of G-CSF with chemotherapy increased the median CD34+ yield compared to G-CSF alone, although no obvious impact on the failure rate was noted in this relatively small group of pts. Remobilization was associated with high failure rates in NHL (79.2%), HD (77.1%), and MM (73.3%). Pooled collections were <2 × 10^6 CD34+/kg in 33.6%, 37.1%, and 36.7% of failed mobilizers, respectively. ANOVA analysis indicated a significant difference in outcome based on remobilization regimen. A post hoc comparison using the Scheffe Test determined that G-CSF mobilization failures remobilized with G-CSF plus AMD3100 collected significantly more CD34+ cells than G-CSF-failures remobilized with either G-CSF, G/GM-CSF or G-CSF/chemo (1-way ANOVA: F(3, 233) = 27.878, F0.5(3, 233).05 = 2.643, p < .0001). The compared groups did not significantly differ in initial mobilization efficiency with G-CSF (as determined by ANOVA and Scheffe Test). Conclusions: The mobilization failure rate is substantially higher in NHL and HD pts than MM pts. Pts who fail initial mobilization are highly likely to fail a 2nd mobilization, regardless of disease state. As the combination of chemotherapy to G-CSF may not be sufficient to reduce failure rates, alternative mobilization strategies are needed to improve HSPC collection, particularly in NHL/HD pts and failed mobilizers. First mobilization failure rates (< 2×10^6 CD34+/kg) Mobilization regimen N Failures Median yield (×10^6) 95% C.I (×10^6) * Incl. pts mobilized w. alternative regimens NHL G-CSF 471 26.5% 2.89 2.76–3.04 G-CSF/Chemo 35 22.9% 4.68 2.8–8.53 All* 564 28.7% HD G-CSF 130 26.2% 3.01 2.75–3.37 G-CSF/Chemo 12 16.7% 5.38 2.35–9.52 All* 165 24.8% MM G-CSF 386 6.5% 4.62 4.16–4.98 G-CSF/Chemo 17 5.9% 8.52 4.46–16.3 All* 409 6.6%


Sign in / Sign up

Export Citation Format

Share Document