Analysis of radar altimeter interference due to wireless avionics intra-communication systems by using large-scale FDTD method — Investigation on Airbus A320 class passenger aircraft

Author(s):  
Shunichi Futatsumori ◽  
Kazuyuki Morioka ◽  
Akiko Kohmura ◽  
Naruto Yonemoto ◽  
Takashi Hikage ◽  
...  
Nanophotonics ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Wei Shi ◽  
Ye Tian ◽  
Antoine Gervais

AbstractThe tremendous growth of data traffic has spurred a rapid evolution of optical communications for a higher data transmission capacity. Next-generation fiber-optic communication systems will require dramatically increased complexity that cannot be obtained using discrete components. In this context, silicon photonics is quickly maturing. Capable of manipulating electrons and photons on the same platform, this disruptive technology promises to cram more complexity on a single chip, leading to orders-of-magnitude reduction of integrated photonic systems in size, energy, and cost. This paper provides a system perspective and reviews recent progress in silicon photonics probing all dimensions of light to scale the capacity of fiber-optic networks toward terabits-per-second per optical interface and petabits-per-second per transmission link. Firstly, we overview fundamentals and the evolving trends of silicon photonic fabrication process. Then, we focus on recent progress in silicon coherent optical transceivers. Further scaling the system capacity requires multiplexing techniques in all the dimensions of light: wavelength, polarization, and space, for which we have seen impressive demonstrations of on-chip functionalities such as polarization diversity circuits and wavelength- and space-division multiplexers. Despite these advances, large-scale silicon photonic integrated circuits incorporating a variety of active and passive functionalities still face considerable challenges, many of which will eventually be addressed as the technology continues evolving with the entire ecosystem at a fast pace.


2018 ◽  
Author(s):  
Franz Slemr ◽  
Andreas Weigelt ◽  
Ralf Ebinghaus ◽  
Johannes Bieser ◽  
Carl A. M. Brenninkmeijer ◽  
...  

Abstract. Mercury was measured onboard the IAGOS-CARIBIC passenger aircraft since May 2005 until February 2016 during nearly monthly sequences of mostly four intercontinental flights from Germany to destinations in North and South America, Africa, and South and East Asia. Most of these mercury data were obtained using an internal default signal integration procedure of the Tekran instrument but since April 2014 more precise and accurate data were obtained using post-flight manual integration of the instrument raw signal. In this paper we use the latter data. Elevated upper tropospheric total mercury (TM) concentrations due to large scale biomass burning were observed in the upper troposphere (UT) at the equator and southern latitudes during the flights to Latin America and South Africa in boreal autumn (SON) and boreal winter (DJF). TM concentrations in the lowermost stratosphere (LMS) decrease with altitude above the thermal tropopause but the gradient is less steep than reported before. Seasonal variation of the vertical TM distribution in the UT and LMS is similar to that of other trace gases with surface sources and stratospheric sinks. Using speciation experiments, we show that nearly identical TM and gaseous elementary mercury (GEM) concentrations exist at and below the tropopause. Above the thermal tropopause GEM concentrations are almost always smaller than those of TM and the TM – GEM (i.e. Hg2+) difference increases up to ~ 40 % of TM at ~ 2 km and more above the thermal tropopause. Correlations with N2O as a reference tracer suggest stratospheric lifetimes of 72 ± 37 and 74 ± 27 yr for TM and GEM, respectively, comparable to the stratospheric lifetime of COS. This coincidence, combined with pieces of evidence from us and other researchers, corroborates the hypothesis that Hg2+ formed by oxidation in the stratosphere attaches to sulfate particles formed mainly by oxidation of COS and is removed with them from the stratosphere by air mass exchange, gravitational sedimentation, and cloud scavenging processes.


2021 ◽  
Author(s):  
Shuo Zhang ◽  
Shuo Shi ◽  
Tianming Feng ◽  
Xuemai Gu

Abstract Unmanned aerial vehicles (UAVs) have been widely used in communication systems due to excellent maneuverability and mobility. The ultra-high speed, ultra-low latency, and ultra-high reliability of 5th generation wireless systems (5G) have further promoted vigorous development of UAVs. Compared with traditional means of communication, UAV can provide services for ground terminal without time and space constraints, so it is often used as air base station (BS). Especially in emergency communications and rescue, it provides temporary communication signal coverage service for disaster areas. In the face of large-scale and scattered user coverage tasks, UAV's trajectory is an important factor affecting its energy consumption and communication performance. In this paper, we consider a UAV emergency communication network where UAV aims to achieve complete coverage of potential underlying D2D users (DUs). The trajectory planning problem is transformed into the deployment and connection problem of stop points (SPs). Aiming at trajectory length and sum throughput, two trajectory planning algorithms based on K-means are proposed. Due to the non-convexity of sum throughput optimization, we present a sub-optimal solution by using the successive convex approximation (SCA) method. In order to balance the relationship between trajectory length and sum throughput, we propose a joint evaluation index which is used as an objective function to further optimize trajectory. Simulation results show the validity of the proposed algorithms which have advantages over the well-known benchmark scheme in terms of trajectory length and sum throughput.


2019 ◽  
Author(s):  
Marion Poupard ◽  
Paul Best ◽  
Jan Schlüter ◽  
Helena Symonds ◽  
Paul Spong ◽  
...  

Killer whales (Orcinus orca) can produce 3 types of signals: clicks, whistles and vocalizations. This study focuses on Orca vocalizations from northern Vancouver Island (Hanson Island) where the NGO Orcalab developed a multi-hydrophone recording station to study Orcas. The acoustic station is composed of 5 hydrophones and extends over 50 km 2 of ocean. Since 2015 we are continuously streaming the hydrophone signals to our laboratory in Toulon, France, yielding nearly 50 TB of synchronous multichannel recordings. In previous work, we trained a Convolutional Neural Network (CNN) to detect Orca vocalizations, using transfer learning from a bird activity dataset. Here, for each detected vocalization, we estimate the pitch contour (fundamental frequency). Finally, we cluster vocalizations by features describing the pitch contour. While preliminary, our results demonstrate a possible route towards automatic Orca call type classification. Furthermore, they can be linked to the presence of particular Orca pods in the area according to the classification of their call types. A large-scale call type classification would allow new insights on phonotactics and ethoacoustics of endangered Orca populations in the face of increasing anthropic pressure.


Author(s):  
Ansiya Eshack ◽  
S. Krishnakumar

<span>With an ever growing demand for low-power devices, it is a general trend to search for ways to reduce the power consumption of a system. Multipliers are an important requirement in applications linked to Digital Signal Processing, Communication Systems, Optical Computing, Nanotechnology, Low-Power Very Large Scale Integration and Quantum Computing. Conventional mathematics makes multiplication a very long and time consuming process. The use of Vedic mathematics has led to great reduction in the time required for such calculations. The excessive use of Urdhava Tiryakbhyam sutra in multiplication surely proves its effectiveness and simplicity in this domain. This sutra supports the process of pipelining, a method employed in reduction of the power used by a system. Reversible logic has been gaining demand due to its low-power capabilities and is currently being used in many computing applications. The paper proposes two multiplier systems: one design employs the Urdhava Tiryakbhyam sutra along with pipelining and the second uses reversible logic gates into the first design. These proposed systems provide very less delay for result computation and low hardware utilization when compared to non-pipelined Vedic multipliers.</span>


2010 ◽  
Vol 8 ◽  
pp. 257-262 ◽  
Author(s):  
C. Mannweiler ◽  
A. Klein ◽  
J. Schneider ◽  
H. D. Schotten

Abstract. The increasing availability of both static and dynamic context information has steadily been driving the development of context-aware communication systems. Adapting system behavior according to current context of the network, the user, and the terminal can yield significant end-to-end performance improvements. In this paper, we present a concept for how to use context information, in particular location information and movement prediction, for Heterogeneous Access Management (HAM). In a first step, we outline the functional architecture of a distributed and extensible context management system (CMS) that defines the roles, tasks, and interfaces of all modules within such a system for large-scale context acquisition and dissemination. In a second step, we depict how the available context information can be exploited for optimizing terminal handover decisions to be made in a multi-RAT (radio access technology) environment. In addition, the utilized method for predicting terminal location as well as the objective functions used for evaluating and comparing system performance are described. Finally, we present preliminary simulation results demonstrating that HAM systems that include current and future terminal context information in the handover decision process clearly outperform conventional systems.


2021 ◽  
Author(s):  
ABM B. Alam

Network Survivability is a critical issue in telecommunications network due to increasing dependence of the society on communication systems. Fast restoration from a network failure is an important challenge that deserves attention. This thesis addresses an optimal link capacity design problem for survivable asynchronous transfer mode (ATM) network based on the link restoration strategy. Given a projected traffic demands and the network topology, capacity and flow assignment are jointly optimized to yield the optimal capacity placement. The problem is formulated as large-scale nonlinear programming and is solved using a specific type of Lagrange method (so called Separable Augmented Lagrangian Algorithm or SALA for short). Several networks with diverse topological characteristics are used in the experiments to validate our proposed novel model, using capacity installation cost, routing cost, total network cost, used capacity and required CPU time, as performance metrics. Link restoration strategy is compared against global reconfiguration strategy using these performance metrics.


2021 ◽  
Author(s):  
Fereshteh salimian rizi ◽  
Abolfazl Falahati

Abstract A composite α-µ/Lognormal fading channel is proposed with several channel performance criteria. This model considers the most effective occurrences in a fading channel, mainly non-linearity, multi-cluster nature of propagation medium, and shadowing effects. The new generation of communication systems is moving towards the use of millimetre waves (mmW). In this type of propagation, large-scale effects of fading channel on the received signal are significant, so in the proposed composite model, the lognormal distribution is considered to model large-scale effects of fading, which is the most accurate distribution to model shadowing. The Gaussian-Hermite quadrature sum is used to approximate the probability distribution function (PDF) of the proposed model. After calculating the statistics, the symbol error rate (SER) and ergodic capacity are computed. The Mellin transform technique is used to calculate the SER expression of different modulation schemes; then, ergodic capacity is computed for a diverse frequency spectrum. Finally, the Monte Carlo method is used to evaluate the analyses.


Sign in / Sign up

Export Citation Format

Share Document