CPW-Fed Circularly Polarized Slot Antenna

2017 ◽  
Vol 7 (10) ◽  
pp. 70
Author(s):  
Ajit Chandramohan Yadav ◽  
Shafiyoddin Badroddin Sayyad
Keyword(s):  
Frequency Band ◽  
Microstrip Antenna ◽  
Dielectric Material ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Dual Band ◽  
Slot Antenna ◽  
Frequency Range ◽  
Band Frequency ◽  
Circularly Polarized

This article demonstrates the coplanar waveguide (CPW) feed L- slot microstrip antenna for multi frequency band operation is presented. The proposed antenna is excited by a single CPW feed connected to a Microstrip antenna. In this radiating patch and feed are etched on the same dielectric material. A SMA connector is used to connect the feed strip which couples the energy to a radiating patch by capacitive feed. The length and width are designed to obtained dual band frequency range. A truncation is used for multiband operations and for proper impedance matching. L- slot is used to increase the depth of S11 parameter. 

A compact polarization reconfigurable stacked microstrip antenna for WiMAX application

2020 ◽  
pp. 1-16
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Microstrip Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Substrate Layer ◽  
Linearly Polarized ◽  
Coaxial Probe

Abstract In this paper, a stacked microstrip patch antenna with polarization reconfigurable property has been proposed for worldwide interoperability for microwave access (WiMAX) application. The proposed antenna has two substrate layers: upper and lower layers with two radiating patches connected with the coaxial probe. Without the upper layer the lower square-shaped substrate layer having regular hexagonal radiating patch with probe fed acts as a linear polarized antenna with impedance bandwidth for (S11 ≤ −10 dB) is 370 MHz 10.56% (3.32–3.69 GHz) cover WiMAX (3.4–3.69 GHz) application band. The hexagonal radiating patch is perturbed with an optimum rectangular slot to enhance the impedance bandwidth of the antenna. The lower substrate layer having hexagonal patch with the same probe position is stacked with the upper square-shaped substrate layer with same sized square patch and the upper patch soldered with the coaxial probe. The overall stacked antenna generates a circularly polarized band when the opposite corner of the top square radiating patch of the upper layer is truncated with optimum size. In order to generate another circularly polarized band and to improve the input impedance matching of the stacked antenna, the top radiating patch is perturbed with two slots and a slit. The stacked circularly polarized antenna generates impedance bandwidth of 12.75% (3.23–3.67 GHz) for (S11 ≤ −10 dB) with two circularly polarized bands (3.34–3.37 GHz) and (3.66–3.70 GHz) as per (axial ratio ≤ 3 dB) for WiMAX application. Therefore, the proposed antenna can be used as linearly polarized or dual band circularly polarized according to requirement.

scholarly journals A Novel Dual-Band Circularly Polarized Rectangular Slot Antenna

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Biao Li ◽  
Yang Ding ◽  
Ying-Zeng Yin
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Surface Current ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Surface Current Density ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Metal Frame

A coplanar waveguide fed dual-band circularly polarized rectangular slot antenna is presented. The proposed antenna consists of a rectangular metal frame acting as a ground and an S-shaped monopole as a radiator. The spatial distribution of the surface current density is employed to demonstrate that the circular polarization is generated by the S-shaped monopole which controls the path of the surface currents. An antenna prototype, having overall dimension 37 × 37 × 1 mm3, has been fabricated on FR4 substrate with dielectric constant 4.4. The proposed antenna achieves 10 dB return loss bandwidths and 3 dB axial ratio (AR) in the frequency bands 2.39–2.81 GHz and 5.42–5.92 GHz, respectively. Both these characteristics are suitable for WLAN and WiMAX applications.

A Compact Broadband Circularly Polarized Slot Antenna for Universal UHF RFID Reader and GPS

2021 ◽  
Vol 36 (5) ◽  
pp. 589-595
Author(s):  
Canjie Chen ◽  
Quanyuan Feng
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Polarization Characteristics ◽  
Ground Plate

A novel compact printed broadband circularly polarized slot antenna is proposed in this paper. The antenna consists of an inverted L-shaped coplanar waveguide feed structure and a square ground plate loaded with three rectangular slots. The antenna achieves good impedance matching and circular polarization characteristics by adjusting the size of the L-shaped band and the rectangular slot. The simulation results show that the antenna has a 10-dB impedance bandwidth of 1360 MHz (690-2050 MHz) and a 3 dB axial ratio (AR) bandwidth of 490 MHz (770-1260 MHz). Additionally, the maximum gain reached 4.02 dBi. The antenna proposed in this paper can be applied to UHF RFID and GPS frequency bands.

Broadband CPW-Fed Circularly Polarized Square Slot Antenna for Universal UHF RFID Handheld Reader

2021 ◽  
Vol 36 (6) ◽  
pp. 747-754
Author(s):  
Rui Ma ◽  
Quanyuan Feng
Keyword(s):  
Low Cost ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Polarization Characteristic ◽  
Dielectric Substrate ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized

This paper presents a new coplanar waveguide (CPW)-fed circularly polarized square slot antenna (CPSSA). The proposed antenna uses an inverted Z-shaped feedline protruded from the signal line of the feeding CPW. Circularly polarized (CP) radiation can be achieved by adequately inserting the arc-shaped grounded strip into the upper right corner of the square slot. The widened vertical tuning stub on the L-shaped grounded strip can improve impedance matching and axial ratio (AR) performance. The measured results indicate that the 10 dB impedance bandwidth is 620 MHz (652-1272 MHz), and the 3 dB axial ratio bandwidth is 320 MHz (840-1160 MHz), which has a broadband characteristic. In the range of the universal UHF RFID band, the measured peak gain is about 4.4 dBi. The proposed CPSSA uses low-cost FR4 material as the dielectric substrate. The overall size of the antenna is 119 × 119 × 0.5 mm3. The proposed antenna has a simple structure, easy processing, good performance, wide operating bandwidth, and dual circular polarization characteristic. It can be applied to the universal UHF RFID handheld reader environment.

CPW slot antenna with Y-shaped central monopole and matching arms

2018 ◽  
Vol 10 (10) ◽  
pp. 1166-1174 ◽  
Author(s):  
Daniele Inserra ◽  
Xiaochuan Fang ◽  
Yongjun Huang ◽  
Guangjun Wen
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Dual Band ◽  
Slot Antenna ◽  
Wideband Antenna ◽  
Rectangular Slot ◽  
Measured Impedance ◽  
Matching Mechanism ◽  
Directive Antenna ◽  
Waveguide Slot Antenna

AbstractA coplanar waveguide slot antenna is herein presented. A rectangular slot is excited by a Y-shaped monopole etched on a single FR4 substrate. This structure exhibits two resonances due to the presence of the slot and the central monopole which can be used to design a dual-band or a wideband antenna. A parametric analysis is presented to describe the impedance matching mechanism for the two impedance bandwidths (BWs), as well as for the wideband antenna. The latter is fabricated and provides a measured impedance BW from 2.28 to 3.6 GHz, and gain larger than 2 dBi, yielding an outstanding BW/size trade-off. Finally, a 60 mm × 60 mm back metallic reflector is used to achieve a directive antenna with 6 dBi of measured gain, and an impedance BW from 2.16 to 3.59 GHz.

Compact Design of an UWB Antenna with Dual Band-Notched Characteristic

2012 ◽  
Vol 195-196 ◽  
pp. 13-16
Author(s):  
Wen Bo Zeng ◽  
Jia Zhao ◽  
Bao Zhong Ke ◽  
Qi Qi Wu
Keyword(s):  
Frequency Band ◽  
Printed Circuit Board ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Circuit Board ◽  
Dual Band ◽  
Uwb Antenna ◽  
Compact Design

An ultra-wideband (UWB) printed antenna with dual band-notched characteristic is presented in this paper. The proposed antenna is composed of a semi-circular patch fed by a tapered coplanar waveguide (CPW) and an unclosed ground plane, which are printed onto the same side of a FR4 printed circuit board (PCB) with an overall size of 30 mm × 30 mm × 1.5 mm. By embedding a simple arc-shaped slot in the patch and adding a T-shaped strip on the top of the patch, two notched frequency bands for rejection of WiMAX and WLAN system can be realized. The characteristics of the proposed antenna are investigated by using the software HFSS and validated experimentally, both simulated and measured results show that the proposed antenna prototype achieves good impedance matching over an frequency band from 2.1011.40 GHz for VSWR2 with two notched bands over the frequency range of 5-5.95 GHz and 3.1-3.9 GHz. Furthermore, a relatively stable gain and suitable radiation patterns are also achieved in both lower and upper UWB frequency band.

Wideband radar cross section reduction of a microstrip antenna with square slots

2019 ◽  
Vol 11 (4) ◽  
pp. 341-350 ◽  
Author(s):  
Zhang Jiakai ◽  
Zheng Qi ◽  
Li Haixiong ◽  
Ding Jun ◽  
Guo Chenjiang
Keyword(s):  
Cross Section ◽  
Frequency Band ◽  
Microstrip Antenna ◽  
Oblique Incidence ◽  
Radar Cross Section ◽  
Frequency Range ◽  
Band Frequency ◽  
Wideband Antenna ◽  
Wideband Radar

AbstractThis paper proposes a new radar cross section (RCS) reduced microstrip antenna incorporating 475 square slots on the patch. The proposed antenna achieves wideband RCS reduction with radiation performance sustained. The modified and reference antenna are simulated and analyzed in radiating and scattering mode, respectively. Prototypes of two antennas are fabricated and measured. Compared with the reference antenna, the simulated result shows the modified antenna RCS reduced in the frequency range 1.1–2.6 GHz, which contains the in-band and out-of-band frequency band simultaneously. And the maximum RCS reduction is 7.6dB at the frequency of 1.19GHz. Besides, the modified antenna can achieve the antenna RCS reduction in the case of oblique incidence. The prototypes of two antennas are fabricated and measured, and the accuracy of the simulation is proved by the measured result. Due to its advantages of simplicity, wideband RCS reduced, broad-angle RCS reduced, the method in this paper is suitable for wideband antenna RCS reduction in space-limited environment.

scholarly journals Modified Dual-Band Stacked Circularly Polarized Microstrip Antenna

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Guo Liu ◽  
Liang Xu ◽  
Yi Wang
Keyword(s):  
Radiation Pattern ◽  
Global Positioning System ◽  
Microstrip Antenna ◽  
High Performance ◽  
Axial Ratio ◽  
Dual Band ◽  
Optimized Design ◽  
Positioning System ◽  
Circularly Polarized ◽  
Global Positioning

A novel high-performance circularly polarized (CP) antenna is proposed in this paper. Two separate antennas featuring the global positioning system (GPS) dual-band operation (1.575 GHz and 1.227 GHz for L1 band and L2 band, resp.) are integrated with good isolation. To enhance the gain at low angle, a new structure of patch and two parasitic metal elements are introduced. With the optimized design, good axial ratio and near-hemispherical radiation pattern are obtained.

Sign in / Sign up

Export Citation Format

Share Document