Compact Design of an UWB Antenna with Dual Band-Notched Characteristic

2012 ◽  
Vol 195-196 ◽  
pp. 13-16
Author(s):  
Wen Bo Zeng ◽  
Jia Zhao ◽  
Bao Zhong Ke ◽  
Qi Qi Wu
Keyword(s):  
Frequency Band ◽  
Printed Circuit Board ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Circuit Board ◽  
Dual Band ◽  
Uwb Antenna ◽  
Compact Design

An ultra-wideband (UWB) printed antenna with dual band-notched characteristic is presented in this paper. The proposed antenna is composed of a semi-circular patch fed by a tapered coplanar waveguide (CPW) and an unclosed ground plane, which are printed onto the same side of a FR4 printed circuit board (PCB) with an overall size of 30 mm × 30 mm × 1.5 mm. By embedding a simple arc-shaped slot in the patch and adding a T-shaped strip on the top of the patch, two notched frequency bands for rejection of WiMAX and WLAN system can be realized. The characteristics of the proposed antenna are investigated by using the software HFSS and validated experimentally, both simulated and measured results show that the proposed antenna prototype achieves good impedance matching over an frequency band from 2.1011.40 GHz for VSWR2 with two notched bands over the frequency range of 5-5.95 GHz and 3.1-3.9 GHz. Furthermore, a relatively stable gain and suitable radiation patterns are also achieved in both lower and upper UWB frequency band.

scholarly journals DESIGN OF ULTRAWIDEBAND MONOPOLE ANTENNA WITH MINIMUM GROUND PLANE EFFECT

2014 ◽  
pp. 87-90
Author(s):  
PRAVEEN K P ◽  
T MARY NEEBHA
Keyword(s):  
Printed Circuit Board ◽  
Low Cost ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Circuit Board ◽  
Uwb Antenna ◽  
Printed Circuit ◽  
Feed Line ◽  
Simple Geometry

A Planar ultra wideband antenna design is analyzed for increased impedance matching in the Ultrawideband (UWB) range (3.1GHz to 10.6GHz). Also the effect of the ground plane is minimized by cutting slot on the ground plane. Impedance matching of Ultrawideband (UWB) antenna can be improved by introducing simple microstrip transitions between the 50-ohm feed line and the printed disc. In this paper a dual step feed is proposed between the feed line and radiator. It also offers a very simple geometry suitable for low cost fabrication and straightforward printed circuit board integration. Here triangle slot is provided on the ground plane in order to reduce the ground plane effect. The radiator used here is elliptical disc.

scholarly journals Design of Ultra Wideband Antenna

2020 ◽  
Vol 8 (5) ◽  
pp. 3988-3990
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Microstrip Feed

In this paper, A coplanar waveguide (CPW) ultra-wideband(UWB) antenna is designed, analyzed and simulated by computer simulation technology(CST). The proposed antenna is fabricated on FR-4 dielectric substrate. A microstrip feed line is used to excite the antenna.The ground plane is slotted to improve the impedance bandwidth (BW). Here, a rectangular patch is used as radiator and two corners out of four are truncated to improve impedance matching and UWB characterization.This antenna satisfies UWB characteristics like VSWR<2, Return loss(S11)<-10 dB,Gain<5dB and the antenna is operating within the frequency range of 1.59 to 11.87 GHz range which covers whole ultra wideband i.e. 3.1 to 10.6 GHz range.

A CPW-fed stepped slot UWB antenna for MIMO/diversity applications

2015 ◽  
Vol 9 (1) ◽  
pp. 151-162 ◽  
Author(s):  
Raj Kumar ◽  
Neha Pazare
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Slot Antennas ◽  
Capacity Loss ◽  
Field Radiation

An ultra-wideband (UWB) slot antenna for diversity applications is introduced. The overall structure of the antenna consists of two similar coplanar waveguide (CPW)-fed stepped rectangular slots placed in an orthogonal position. The slots are asymmetric with respect to their placement in the ground plane. The CPW feeds are double stepped and terminated on hexagonal patches for better impedance matching. A wide impedance bandwidth (measured) from 3 to 12 GHz with an isolation better than 15 dB is obtained with this antenna. To improve the isolation, the design is modified and an I-shaped slot strip is introduced between the two slot antennas. With this, the isolation is brought about 25 dB of most of the band, while the impedance bandwidth remains the same (2.8–12 GHz for port 1, measured and 2.9–12 GHz for port 2, measured). The far-field radiation patterns are also measured and a peak gain of about 5 dBi is obtained. Finally, the diversity parameters such as envelope correlation coefficient and capacity loss are calculated and found to have low values. The antenna is expected to be useful for UWB diversity applications with good isolation.

scholarly journals A Magneto-Electric Dipole Antenna Array for Millimeter Wave Applications

2020 ◽  
Vol 10 (4) ◽  
pp. 6057-6061
Author(s):  
D. T. T. My ◽  
H. N. B. Phuong ◽  
T. T. Huong ◽  
B. T. M. Tu
Keyword(s):  
Millimeter Wave ◽  
Frequency Band ◽  
Printed Circuit Board ◽  
Impedance Matching ◽  
Ground Plane ◽  
Wide Band ◽  
Side Lobe ◽  
Dipole Antenna ◽  
Circuit Board ◽  
Single Element

In this paper, a low-profile broadband antenna is proposed for future 5G millimeter-wave cellular wireless networks. The proposed antenna is a modified Magneto-Electric (ME) dipole, which consists of four metallic plates, grounded vias, an aperture fed, a ground plane, and a microstrip line feed. The antennas are built on RT/Duroid 5880 substrates and have been realized by the printed circuit board technique. A single-element with an overall of 10×10×1.04mm3 (~1.26λo×1.26λo×0.13λo at 38GHz) exhibits an impedance matching of 27.9% (32.2-42.8GHz) for |S11|<–10dB and a realized gain up to 7.5dBi over the frequency band. The usefulness of these antennas as beamforming radiators is demonstrated by a 1×4 element linear array. Also, a wide-band excitation is applied for the linear ME dipole array to realize a broadband array. The simulated results proved the proposed array can operate in a frequency band spreading from 31.4GHz to 42.1GHz with a gain of 12.5dBi and a side-lobe of -13dB

scholarly journals A Novel CPW-Fed UWB Antenna with Band-Stop Function

2014 ◽  
Vol 2014 ◽  
pp. 1-8
Author(s):  
Huaming Chen ◽  
Zhengrong Li ◽  
Baiyu Li ◽  
Guangfu Sun
Keyword(s):  
Wireless Communication ◽  
Frequency Band ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Satellite Applications

A novel coplanar waveguide-fed (CPW) ultrawideband (UWB) antenna with band-stop function is presented in this paper. The proposed antenna comprises a CPW-fed slot rectangular patch with an open stub ground plane, and two inverted L-shaped strip conductors are fabricated on the back plane. The overall size of the antenna is 25 × 25 × 1.6 mm2, and it achieves good impedance matching and radiation gain. Simulated and measured results show that the designed antenna operates at 2.9 GHz–13.08 GHz with band rejection in the frequency band of 7.7 GHz–9.05 GHz for satellite applications, and the proposed antenna is suitable for UWB wireless communication applications.

scholarly journals Realizing UWB Antenna Array with Dual and Wide Rejection Bands Using Metamaterial and Electromagnetic Bandgaps Techniques

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 269
Author(s):  
Ayman A. Althuwayb ◽  
Mohammad Alibakhshikenari ◽  
Bal S. Virdee ◽  
Pancham Shukla ◽  
Ernesto Limiti
Keyword(s):  
Antenna Array ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Average Gain ◽  
Left Handed ◽  
Notched Band

This research article describes a technique for realizing wideband dual notched functionality in an ultra-wideband (UWB) antenna array based on metamaterial and electromagnetic bandgap (EBG) techniques. For comparison purposes, a reference antenna array was initially designed comprising hexagonal patches that are interconnected to each other. The array was fabricated on standard FR-4 substrate with thickness of 0.8 mm. The reference antenna exhibited an average gain of 1.5 dBi across 5.25–10.1 GHz. To improve the array’s impedance bandwidth for application in UWB systems metamaterial (MTM) characteristics were applied it. This involved embedding hexagonal slots in patch and shorting the patch to the ground-plane with metallic via. This essentially transformed the antenna to a composite right/left-handed structure that behaved like series left-handed capacitance and shunt left-handed inductance. The proposed MTM antenna array now operated over a much wider frequency range (2–12 GHz) with average gain of 5 dBi. Notched band functionality was incorporated in the proposed array to eliminate unwanted interference signals from other wireless communications systems that coexist inside the UWB spectrum. This was achieved by introducing electromagnetic bandgap in the array by etching circular slots on the ground-plane that are aligned underneath each patch and interconnecting microstrip-line in the array. The proposed techniques had no effect on the dimensions of the antenna array (20 mm × 20 mm × 0.87 mm). The results presented confirm dual-band rejection at the wireless local area network (WLAN) band (5.15–5.825 GHz) and X-band satellite downlink communication band (7.10–7.76 GHz). Compared to other dual notched band designs previously published the footprint of the proposed technique is smaller and its rejection notches completely cover the bandwidth of interfering signals.

scholarly journals Compact Dual-Band Planar Inverted-e-Shaped Antenna Using Defected Ground Structure

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Wen Piao Lin ◽  
Dong-Hua Yang ◽  
Zong-De Lin
Keyword(s):  
Printed Circuit Board ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Impedance Matching ◽  
Local Area ◽  
Circuit Board ◽  
Dual Band ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure

This paper presents a novel dual-band planar inverted-e-shaped antenna (PIEA) using defected ground structure (DGS) for Bluetooth and wireless local area network (WLAN) applications. The PIEA can reduce electromagnetic interferences (EMIs) and it is constructed on a compact printed circuit board (PCB) size of 10 × 5 × 4 mm3. Experimental results indicate that the antenna with a compact meandered slit can improve the operating impedance matching and bandwidths at 2.4 and 5.5 GHz. The measured power gains at 2.4 and 5.5 GHz band are 1.99 and 3.71 dBi; antenna efficiencies are about 49.33% and 55.23%, respectively. Finally, the good performances of the proposed antenna can highly promote for mobile device applications.

scholarly journals Bandwidth Enhancement Technique of the Meandered Monopole Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6
Author(s):  
Chien-Jen Wang ◽  
Dai-Heng Hsieh
Keyword(s):  
Communication Systems ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Matching Condition ◽  
Resonant Mode ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Feeding Structure

A small dual-band monopole antenna with coplanar waveguide (CPW) feeding structure is presented in this paper. The antenna is composed of a meandered monopole, an extended conductor tail, and an asymmetrical ground plane. Tuning geometrical structure of the ground plane excites an additional resonant frequency band and thus enhances the impedance bandwidth of the meandered monopole antenna. Unlike the conventional monopole antenna, the new resonant mode is excited by a slot trace of the CPW transmission line. The radiation performance of the slot mode is as similar as that of the monopole. The parametrical effect of the size of the one-side ground plane on impedance matching condition has been derived by the simulation. The measured impedance bandwidths, which are defined by the reflection coefficient of −6 dB, are 186 MHz (863–1049 MHz, 19.4%) at the lower resonant band and 1320 MHz (1490–2810 MHz, 61.3%) at the upper band. From the results of the reflection coefficients of the proposed monopole antenna, the operated bandwidths of the commercial wireless communication systems, such as GSM 900, DCS, IMT-2000, UMTS, WLAN, LTE 2300, and LTE 2500, are covered for uses.

CPW triple-fed ultra-wideband antenna with variable band-notch function

2014 ◽  
Vol 7 (6) ◽  
pp. 791-796 ◽  
Author(s):  
M. Naser-Moghadasi ◽  
L. Asadpor
Keyword(s):  
Printed Circuit Board ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Circuit Board ◽  
Manufacturing Cost ◽  
Radiation Patterns ◽  
Desirable Feature ◽  
Planar Wave ◽  
Matched Impedance ◽  
Uwb Applications

A small and compact ultra-wideband (UWB) aperture antenna with extended band-notched design is proposed. The antenna is composed of a rectangular aperture on ground plane of a printed circuit board and a fork-like exciting stub. The presented co-planar wave guide triple-fed antenna is easy to be applied with RF and microwave circuitry for low manufacturing cost. The antenna is successfully designed, implemented, and measured. A compact aperture area of 12.5 × 23 mm2 is acquired with promising performances, including broadband matched impedance and stable radiation patterns. The correlation between the mode-based field distributions and radiation patterns is discussed. Extended from the proposed antenna, one advanced band-notched (5–6 GHz) designs are also presented as a desirable feature for UWB applications.

scholarly journals Dual Notched-Band Crescent Moon Dielectric Resonator Antenna

2021 ◽  
Vol 25 (1) ◽  
pp. 11-19
Author(s):  
Mohamed Debab ◽  
◽  
Amina Bendaoudi ◽  
Zoubir Mahdjoub ◽  
◽  
...  
Keyword(s):  
Frequency Band ◽  
Dielectric Resonator ◽  
Satellite Communication ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Printed Antenna ◽  
Antenna Structure

In this article, a dual-band notched ultra-wideband (UWB) dielectric resonator antenna is proposed. The antenna structure consists of Crescent Moon Dielectric Resonator (CMDR) fed by a stepped microstrip monopole printed antenna, partial ground plane, and an I-shaped stub. The Crescent Moon dielectric resonator is placed on the microstrip monopole printed antenna to achieve wide impedance bandwidth, and the I-shaped stub is utilized to improve impedance bandwidth for the WiMAX band. A comprehensive parametric study is carried out using HFSS software to achieve the optimum antenna performance and optimize the bandwidth of the proposed antenna. The entire band is useful with two filtered bands at 5.5 GHz and 6.8 GHz by the creation of notches. The band’s rejection, WLAN band (5.2–5.7 GHz), and the downlink frequency band of ITU 7 GHz-band for satellite communication (6.5–7.3 GHz) is realized by inserting G-shaped and C-shaped slots in the ground. The simulation results demonstrate that the proposed CMDR antenna achieves satisfactory UWB performance, with an impedance bandwidth of around 88.7%, covers the frequency band of 3.2 - 8.3 GHz, excluding a rejection band for the WLAN and ITU 7 GHz band. The CMDR is simulated using HFSS and CST high-frequency simulators.

Sign in / Sign up

Export Citation Format

Share Document