scholarly journals Walking Trajectory Optimization Algorithm For Robot Humanoid on Synthetic Grass

2018 ◽  
Vol 6 (1) ◽  
pp. 35-61 ◽  
Author(s):  
Dimas Pristovani Riananda ◽  
Ardik Wijayanto ◽  
Ali Husein Alasiry ◽  
A. Subhan Khalilullah
Keyword(s):  
Control System ◽  
Optimization Algorithm ◽  
Trajectory Optimization ◽  
Humanoid Robot ◽  
Main Issue ◽  
Robot Soccer ◽  
The Stability ◽  
Trajectory System ◽  
Gait Optimization

Synthetic grass surface is a new rule in international robot soccer competition (RoboCup). The main issue in the development of the RoboCup competition today is about how to make a humanoid robot walk above the field of synthetic grass. Because of that, the humanoid robot needs a system that can be implemented into the walking algorithm. This paper describes how to maintain the stability of humanoid robot called EROS by using walking trajectory algorithm without a control system. The establishment of the walking trajectory system is combined with a process of landing optimization using deceleration and heel-strikes gait optimization. This system has been implemented into a humanoid robot with 52 cm of height and walking on synthetic grass with different speeds. By adding optimization, the robot walks more stable from 32% to 80% of stability. In the next research, the control system will be added to improve the stability.

A Robust Walking Control System of Humanoid Robot

ROBOT ◽  
2010 ◽  
Vol 32 (4) ◽  
pp. 484-490
Author(s):  
Lun XIE ◽  
Zhiliang WANG ◽  
Chong WANG ◽  
Jiaming XU
Keyword(s):  
Control System ◽  
Humanoid Robot ◽  
Walking Control

Investigation of the stability of periodic motions in a nonlinear automatic control system based on the fast fourier transform

2003 ◽  
Vol 3 ◽  
pp. 297-307
Author(s):  
V.V. Denisov
Keyword(s):  
Fourier Transform ◽  
Control System ◽  
Automatic Control ◽  
Fast Fourier Transform ◽  
Automatic Control System ◽  
Resonance Phenomenon ◽  
Periodic Motions ◽  
Multiply Connected ◽  
Non Linear ◽  
The Stability

An approach to the study of the stability of non-linear multiply connected systems of automatic control by means of a fast Fourier transform and the resonance phenomenon is considered.

scholarly journals Parameter identification method of hydraulic automatic gauge control system based on chaotic wolf pack optimization algorithm

AIP Advances ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 055302
Author(s):  
Yong Zhu ◽  
Guangpeng Li ◽  
Shengnan Tang ◽  
Wanlu Jiang ◽  
Zhijian Zheng
Keyword(s):  
Control System ◽  
Parameter Identification ◽  
Optimization Algorithm ◽  
Identification Method ◽  
Automatic Gauge Control

scholarly journals A Unified Control Strategy of Distributed Generation for Grid-Connected and Islanded Operation Conditions Using an Artificial Neural Network

2021 ◽  
Vol 13 (11) ◽  
pp. 6388
Author(s):  
Karim M. El-Sharawy ◽  
Hatem Y. Diab ◽  
Mahmoud O. Abdelsalam ◽  
Mostafa I. Marei
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Control System ◽  
Distributed Generation ◽  
Control Strategy ◽  
Current Control ◽  
Operating Conditions ◽  
Pi Controllers ◽  
Artificial Neural ◽  
The Stability

This article presents a control strategy that enables both islanded and grid-tied operations of a three-phase inverter in distributed generation. This distributed generation (DG) is based on a dramatically evolved direct current (DC) source. A unified control strategy is introduced to operate the interface in either the isolated or grid-connected modes. The proposed control system is based on the instantaneous tracking of the active power flow in order to achieve current control in the grid-connected mode and retain the stability of the frequency using phase-locked loop (PLL) circuits at the point of common coupling (PCC), in addition to managing the reactive power supplied to the grid. On the other side, the proposed control system is also based on the instantaneous tracking of the voltage to achieve the voltage control in the standalone mode and retain the stability of the frequency by using another circuit including a special equation (wt = 2πft, f = 50 Hz). This utilization provides the ability to obtain voltage stability across the critical load. One benefit of the proposed control strategy is that the design of the controller remains unconverted for other operating conditions. The simulation results are added to evaluate the performance of the proposed control technology using a different method; the first method used basic proportional integration (PI) controllers, and the second method used adaptive proportional integration (PI) controllers, i.e., an Artificial Neural Network (ANN).

The Correlation between Time and Frequency Dynamic Performance of Control System

2014 ◽  
Vol 628 ◽  
pp. 186-189
Author(s):  
Meng Xiong Zeng ◽  
Jin Feng Zhao ◽  
Wen Ouyang
Keyword(s):  
Control System ◽  
Performance Index ◽  
Dynamic Performance ◽  
Frequency Domain Analysis ◽  
Practical Significance ◽  
Order System ◽  
Time Frequency ◽  
Performance Indexes ◽  
Quantitative Performance ◽  
The Stability

The control system performance requirement was divided into three parts. They were the stability, rapidity and accuracy. The time-frequency domain analysis in the requirements of three performance were measured through quantitative performance index. The mutual restriction of time-frequency performance and system characteristic parameters of normal second order was discussed. The correlation of system time-frequency performance index was established. The relationship between time-frequency performance indexes in standard two order system was extended to higher order system. The mutually constraining and time-frequency correlation between each performance index was obtained by analysis and calculation. The work had been done above had practical significance to reflect the system dynamic performance in different analytical domains.

Design of Hydraulic Descaling Computer Control System

2014 ◽  
Vol 608-609 ◽  
pp. 19-22
Author(s):  
Ping Xu ◽  
Jian Gang Yi
Keyword(s):  
Control System ◽  
Stability Problem ◽  
Computer Control ◽  
Control Methods ◽  
Computer Control System ◽  
Control Software ◽  
Pressure Water ◽  
Working Principle ◽  
The Stability

Hydraulic descaling system is the key device to ensure the surface quality of billet. However, traditional control methods lead to the stability problem in hydraulic descaling system. To solve the problem, the construction of the hydraulic descaling computer control system is studied, the working principle of the system is analyzed, and the high pressure water bench of hydraulic descaling is designed. Based on it, the corresponding computer control software is developed. The application shows that the designed system is stable in practice, which is helpful for enterprise production.

Sign in / Sign up

Export Citation Format

Share Document