scholarly journals Influence of input parameters in radial compressor design algorithm on the efficiency and its sensitivity analysis

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Patrik Kovář ◽  
Tomáš Kaňka ◽  
Pavel Mačák ◽  
Adam Tater ◽  
Tomáš Vampola
Keyword(s):  
Sensitivity Analysis ◽  
Three Dimensional ◽  
Preliminary Design ◽  
Dominant Effect ◽  
Design Algorithm ◽  
Radial Compressor ◽  
Compressor Design ◽  
Input Parameters ◽  
Definition Of ◽  
Impeller Geometry

Nowadays there are lots of methods using three-dimensional or quasi three-dimensional CFD analysis. Unfortunately, this approach is still very demanding, so that quick preliminary design algorithms have still its importance, even though simplified analytical model of radial compressor gives less accurate results. Obtained results can be used in later stages of the radial compressor (RC) design, such as definition of spatial impeller geometry and CFD computation. The article presents the influence of input parameters in the radial compressor design algorithm on the efficiency. The assembled mathematical model of RC is derived from the basic laws of continuum mechanics and can be used for a quick assessment of the preliminary design concept of the RC. A sensitivity analysis is performed on input parameters to select parameters that have the dominant effect on the monitored performance indicators. On the basis of the sensitivity analysis, a multicriteria optimization process was assembled to increase the performance parameters.

scholarly journals Using a variance-based sensitivity analysis for analyzing the relation between measurements and unknown parameters of a physical model

2011 ◽  
Vol 18 (3) ◽  
pp. 269-276 ◽  
Author(s):  
J. Zhao ◽  
C. Tiede
Keyword(s):  
Sensitivity Analysis ◽  
Uncertainty Analysis ◽  
Physical Model ◽  
Three Dimensional ◽  
Computational Procedure ◽  
Fixed Number ◽  
Volcanic Area ◽  
Unknown Parameters ◽  
Linear Inversion ◽  
Input Parameters

Abstract. An implementation of uncertainty analysis (UA) and quantitative global sensitivity analysis (SA) is applied to the non-linear inversion of gravity changes and three-dimensional displacement data which were measured in and active volcanic area. A didactic example is included to illustrate the computational procedure. The main emphasis is placed on the problem of extended Fourier amplitude sensitivity test (E-FAST). This method produces the total sensitivity indices (TSIs), so that all interactions between the unknown input parameters are taken into account. The possible correlations between the output an the input parameters can be evaluated by uncertainty analysis. Uncertainty analysis results indicate the general fit between the physical model and the measurements. Results of the sensitivity analysis show quite different sensitivities for the measured changes as they relate to the unknown parameters of a physical model for an elastic-gravitational source. Assuming a fixed number of executions, thirty different seeds are observed to determine the stability of this method.

scholarly journals Preliminary Modeling of Rockfall Runout: Definition of the Input Parameters for the Plugin QPROTO

2021 ◽  
Author(s):  
Marta Castelli ◽  
Giulia Torsello ◽  
Gianmarco Vallero
Keyword(s):  
Three Dimensional ◽  
Assessment Procedure ◽  
Forest Density ◽  
The North ◽  
Raster Maps ◽  
Input Parameters ◽  
Block Movement ◽  
Hazard And Risk ◽  
Definition Of ◽  
Block Volume

The identification of the most rockfall-prone areas is the first step of the risk assessment procedure. In the case of land and urban planning, hazard and risk analyses involve large portions of territory and thus preliminary methods are preferred to define specific zones where more detailed computations are needed. To reach this goal, we developed the QGIS-based plugin QPROTO, able to quantitatively compute rockfall time-independent hazard over a three-dimensional topography on the basis of the Cone Method. This is obtained by combining kinetic energy, passing frequency and detachment propensity of each rockfall source. QPROTO requires the definition of few angles (i.e., the energy angle ϕ_p and the lateral angle α) that should take into account all the phenomena occurring during the complex block movement along the slope. The outputs of the plugin are a series of raster maps reporting the invasion zones and the quantification of both the susceptibility and the hazard. In this paper, we propose a method to relate these angles to some characteristics of the block (volume and shape) and the slope (inclination, forest density), to provide QPROTO users with a tool for estimating the input parameters. The results are validated on a series of case studies belonging to the North Western Italian Alps.

scholarly journals Preliminary Modeling of Rockfall Runout: Definition of the Input Parameters for the QGIS Plugin QPROTO

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 88 ◽  
Author(s):  
Marta Castelli ◽  
Giulia Torsello ◽  
Gianmarco Vallero
Keyword(s):  
Three Dimensional ◽  
Assessment Procedure ◽  
Forest Density ◽  
The North ◽  
Raster Maps ◽  
Input Parameters ◽  
Block Movement ◽  
Hazard And Risk ◽  
Definition Of ◽  
Block Volume

The identification of the most rockfall-prone areas is the first step of the risk assessment procedure. In the case of land and urban planning, hazard and risk analyses involve large portions of territory, and thus, preliminary methods are preferred to define specific zones where more detailed computations are needed. To reach this goal, the QGIS-based plugin QPROTO was developed, able to quantitatively compute rockfall time-independent hazard over a three-dimensional topography on the basis of the Cone Method. This is obtained by combining kinetic energy, passing frequency and detachment propensity of each rockfall source. QPROTO requires the definition of few angles (i.e., the energy angle ϕp and the lateral angle α) that should take into account all the phenomena occurring during the complex block movement along the slope. The outputs of the plugin are a series of raster maps reporting the invasion zones and the quantification of both the susceptibility and the hazard. In this paper, a method to relate these angles to some characteristics of the block (volume and shape) and the slope (inclination, forest density) is proposed, to provide QPROTO users with a tool for estimating the input parameters. The results are validated on a series of case studies belonging to the north-western Italian Alps.

Application of high-resolution field-emission LVSEM, backscatter imaging, immunogold staining to definition of the spatial distributions of two human neutrophil adherence receptors

1993 ◽  
Vol 51 ◽  
pp. 36-37
Author(s):  
Robert D. Nelson ◽  
Sharon R. Hasslen ◽  
Stanley L. Erlandsen
Keyword(s):  
Cell Surface ◽  
Surface Membrane ◽  
Three Dimensional ◽  
Human Neutrophils ◽  
Spatial Distributions ◽  
Immunogold Staining ◽  
Functional Control ◽  
Neutrophil Adherence ◽  
Definition Of ◽  
Mode Of Attachment

Receptors are commonly defined in terms of number per cell, affinity for ligand, chemical structure, mode of attachment to the cell surface, and mechanism of signal transduction. We propose to show that knowledge of spatial distribution of receptors on the cell surface can provide additional clues to their function and components of functional control.L-selectin and Mac-1 denote two receptor populations on the neutrophil surface that mediate neutrophil-endothelial cell adherence interactions and provide for targeting of neutrophil recruitment to sites of inflammation. We have studied the spatial distributions of these receptors using LVSEM and backscatter imaging of isolated human neutrophils stained with mouse anti-receptor (primary) antibody and goat anti-mouse (secondary) antibody conjugated to 12 nm colloidal gold. This combination of techniques provides for three-dimensional analysis of the expression of these receptors on different surface membrane domains of the neutrophil: the ruffles and microvilli that project from the cell surface, and the cell body between these projecting structures.

scholarly journals Proposing 3D Thermal Technology for Heritage Building Energy Monitoring

2021 ◽  
Vol 13 (8) ◽  
pp. 1537
Author(s):  
Antonio Adán ◽  
Víctor Pérez ◽  
José-Luis Vivancos ◽  
Carolina Aparicio-Fernández ◽  
Samuel A. Prieto
Keyword(s):  
Computer Vision ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Building Energy ◽  
Energy Monitoring ◽  
3D Computer Vision ◽  
Building Monitoring ◽  
Heritage Buildings ◽  
Heritage Building ◽  
Definition Of

The energy monitoring of heritage buildings has, to date, been governed by methodologies and standards that have been defined in terms of sensors that record scalar magnitudes and that are placed in specific positions in the scene, thus recording only some of the values sampled in that space. In this paper, however, we present an alternative to the aforementioned technologies in the form of new sensors based on 3D computer vision that are able to record dense thermal information in a three-dimensional space. These thermal computer vision-based technologies (3D-TCV) entail a revision and updating of the current building energy monitoring methodologies. This paper provides a detailed definition of the most significant aspects of this new extended methodology and presents a case study showing the potential of 3D-TCV techniques and how they may complement current techniques. The results obtained lead us to believe that 3D computer vision can provide the field of building monitoring with a decisive boost, particularly in the case of heritage buildings.

scholarly journals CONCEPTUAL DESIGN FOR ASSEMBLY IN AEROSPACE INDUSTRY: SENSITIVITY ANALYSIS OF MATHEMATICAL FRAMEWORK AND DESIGN PARAMETERS

2021 ◽  
Vol 1 ◽  
pp. 731-740
Author(s):  
Giovanni Formentini ◽  
Claudio Favi ◽  
Claude Cuiller ◽  
Pierre-Eric Dereux ◽  
Francois Bouissiere ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Conceptual Design ◽  
Design Parameters ◽  
Design For Assembly ◽  
Mathematical Framework ◽  
Commercial Aircraft ◽  
System Architectures ◽  
Complex Engineering ◽  
Aircraft System ◽  
Definition Of

AbstractOne of the most challenging activity in the engineering design process is the definition of a framework (model and parameters) for the characterization of specific processes such as installation and assembly. Aircraft system architectures are complex structures used to understand relation among elements (modules) inside an aircraft and its evaluation is one of the first activity since the conceptual design. The assessment of aircraft architectures, from the assembly perspective, requires parameter identification as well as the definition of the overall analysis framework (i.e., mathematical models, equations).The paper aims at the analysis of a mathematical framework (structure, equations and parameters) developed to assess the fit for assembly performances of aircraft system architectures by the mean of sensitivity analysis (One-Factor-At-Time method). The sensitivity analysis was performed on a complex engineering framework, i.e. the Conceptual Design for Assembly (CDfA) methodology, which is characterized by level, domains and attributes (parameters). A commercial aircraft cabin system was used as a case study to understand the use of different mathematical operators as well as the way to cluster attributes.

Anion packing density: a universal quantity for both dense and porous crystalline inorganic phases

2002 ◽  
Vol 58 (3) ◽  
pp. 457-462 ◽  
Author(s):  
F. Liebau ◽  
H. Küppers
Keyword(s):  
High Pressure ◽  
Packing Density ◽  
Three Dimensional ◽  
Ionic Radii ◽  
Generalized Framework ◽  
Molal Volumes ◽  
Definition Of ◽  
Anion Packing ◽  
Very High ◽  
Framework Density

To compare densities of inorganic high-pressure phases their molal volumes or specific gravities are usually employed, whereas for zeolites and other microporous materials the so-called framework density, FD, is applied. The definition of FD, which refers only to phases with three-dimensional tetrahedron frameworks, is extended to a `generalized framework density' d f, which is independent of the dimensionality of the framework and the coordination number(s) of the framework cations. In this paper the anion packing density, d ap, is introduced as a new quantity which is not only applicable to any inorganic phase but, in contrast to FD and d f, also allows quantitative comparisons to be made for crystalline inorganic phases of any kind. The anion packing density can readily be calculated if the volume and content of the unit cell and the radii of the anions of a phase are known. From d ap values calculated for high-pressure silica polymorphs studied under very high pressure, it is concluded that Shannon–Prewitt effective ionic radii do not sufficiently take into account the compressibility of the anions.

The Use of Photogrammetry in Piping Design

1983 ◽  
Vol 197 (2) ◽  
pp. 125-138 ◽  
Author(s):  
P A Bracewell ◽  
U R Klement
Keyword(s):  
Information Retrieval ◽  
Mathematical Formulation ◽  
Three Dimensional ◽  
Cost Effective ◽  
Process Industry ◽  
Process Plant ◽  
Definition Of ◽  
High Degree ◽  
Positional Data

Piping design for ‘revamp’ projects in the process industry requires the retrieval of large amounts of ‘as-built’ data from existing process plant installations. Positional data with a high degree of accuracy are required. Photogrammetry, the science of measurement from photographs, was identified in Imperial Chemical Industries plc (ICI) as a suitable tool for information retrieval. The mathematical formulation enabling the definition of three-dimensional positions from photographic information is described. The process of using ICI's photogrammetric system for the definition of complete objects such as structures and pipes is illustrated. The need for specialized photogrammetric software for design purposes is explained. A case study describing how the photogrammetric system has been applied is described and graphical outputs from this exercise are shown. It is concluded that this particular photogrammetric system has proved to be a cost effective and accurate tool for the retrieval of ‘as-built’ information.

Sign in / Sign up

Export Citation Format

Share Document