scholarly journals Preliminary Modeling of Rockfall Runout: Definition of the Input Parameters for the Plugin QPROTO

2021 ◽  
Author(s):  
Marta Castelli ◽  
Giulia Torsello ◽  
Gianmarco Vallero
Keyword(s):  
Three Dimensional ◽  
Assessment Procedure ◽  
Forest Density ◽  
The North ◽  
Raster Maps ◽  
Input Parameters ◽  
Block Movement ◽  
Hazard And Risk ◽  
Definition Of ◽  
Block Volume

The identification of the most rockfall-prone areas is the first step of the risk assessment procedure. In the case of land and urban planning, hazard and risk analyses involve large portions of territory and thus preliminary methods are preferred to define specific zones where more detailed computations are needed. To reach this goal, we developed the QGIS-based plugin QPROTO, able to quantitatively compute rockfall time-independent hazard over a three-dimensional topography on the basis of the Cone Method. This is obtained by combining kinetic energy, passing frequency and detachment propensity of each rockfall source. QPROTO requires the definition of few angles (i.e., the energy angle ϕ_p and the lateral angle α) that should take into account all the phenomena occurring during the complex block movement along the slope. The outputs of the plugin are a series of raster maps reporting the invasion zones and the quantification of both the susceptibility and the hazard. In this paper, we propose a method to relate these angles to some characteristics of the block (volume and shape) and the slope (inclination, forest density), to provide QPROTO users with a tool for estimating the input parameters. The results are validated on a series of case studies belonging to the North Western Italian Alps.

scholarly journals Preliminary Modeling of Rockfall Runout: Definition of the Input Parameters for the QGIS Plugin QPROTO

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 88 ◽  
Author(s):  
Marta Castelli ◽  
Giulia Torsello ◽  
Gianmarco Vallero
Keyword(s):  
Three Dimensional ◽  
Assessment Procedure ◽  
Forest Density ◽  
The North ◽  
Raster Maps ◽  
Input Parameters ◽  
Block Movement ◽  
Hazard And Risk ◽  
Definition Of ◽  
Block Volume

The identification of the most rockfall-prone areas is the first step of the risk assessment procedure. In the case of land and urban planning, hazard and risk analyses involve large portions of territory, and thus, preliminary methods are preferred to define specific zones where more detailed computations are needed. To reach this goal, the QGIS-based plugin QPROTO was developed, able to quantitatively compute rockfall time-independent hazard over a three-dimensional topography on the basis of the Cone Method. This is obtained by combining kinetic energy, passing frequency and detachment propensity of each rockfall source. QPROTO requires the definition of few angles (i.e., the energy angle ϕp and the lateral angle α) that should take into account all the phenomena occurring during the complex block movement along the slope. The outputs of the plugin are a series of raster maps reporting the invasion zones and the quantification of both the susceptibility and the hazard. In this paper, a method to relate these angles to some characteristics of the block (volume and shape) and the slope (inclination, forest density) is proposed, to provide QPROTO users with a tool for estimating the input parameters. The results are validated on a series of case studies belonging to the north-western Italian Alps.

scholarly journals Influence of input parameters in radial compressor design algorithm on the efficiency and its sensitivity analysis

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Patrik Kovář ◽  
Tomáš Kaňka ◽  
Pavel Mačák ◽  
Adam Tater ◽  
Tomáš Vampola
Keyword(s):  
Sensitivity Analysis ◽  
Three Dimensional ◽  
Preliminary Design ◽  
Dominant Effect ◽  
Design Algorithm ◽  
Radial Compressor ◽  
Compressor Design ◽  
Input Parameters ◽  
Definition Of ◽  
Impeller Geometry

Nowadays there are lots of methods using three-dimensional or quasi three-dimensional CFD analysis. Unfortunately, this approach is still very demanding, so that quick preliminary design algorithms have still its importance, even though simplified analytical model of radial compressor gives less accurate results. Obtained results can be used in later stages of the radial compressor (RC) design, such as definition of spatial impeller geometry and CFD computation. The article presents the influence of input parameters in the radial compressor design algorithm on the efficiency. The assembled mathematical model of RC is derived from the basic laws of continuum mechanics and can be used for a quick assessment of the preliminary design concept of the RC. A sensitivity analysis is performed on input parameters to select parameters that have the dominant effect on the monitored performance indicators. On the basis of the sensitivity analysis, a multicriteria optimization process was assembled to increase the performance parameters.

Application of high-resolution field-emission LVSEM, backscatter imaging, immunogold staining to definition of the spatial distributions of two human neutrophil adherence receptors

1993 ◽  
Vol 51 ◽  
pp. 36-37
Author(s):  
Robert D. Nelson ◽  
Sharon R. Hasslen ◽  
Stanley L. Erlandsen
Keyword(s):  
Cell Surface ◽  
Surface Membrane ◽  
Three Dimensional ◽  
Human Neutrophils ◽  
Spatial Distributions ◽  
Immunogold Staining ◽  
Functional Control ◽  
Neutrophil Adherence ◽  
Definition Of ◽  
Mode Of Attachment

Receptors are commonly defined in terms of number per cell, affinity for ligand, chemical structure, mode of attachment to the cell surface, and mechanism of signal transduction. We propose to show that knowledge of spatial distribution of receptors on the cell surface can provide additional clues to their function and components of functional control.L-selectin and Mac-1 denote two receptor populations on the neutrophil surface that mediate neutrophil-endothelial cell adherence interactions and provide for targeting of neutrophil recruitment to sites of inflammation. We have studied the spatial distributions of these receptors using LVSEM and backscatter imaging of isolated human neutrophils stained with mouse anti-receptor (primary) antibody and goat anti-mouse (secondary) antibody conjugated to 12 nm colloidal gold. This combination of techniques provides for three-dimensional analysis of the expression of these receptors on different surface membrane domains of the neutrophil: the ruffles and microvilli that project from the cell surface, and the cell body between these projecting structures.

scholarly journals A Risk-Based Approach to Assess the Operational Resilience of Transmission Grids

2020 ◽  
Vol 10 (14) ◽  
pp. 4761
Author(s):  
Milorad Papic ◽  
Svetlana Ekisheva ◽  
Eduardo Cotilla-Sanchez
Keyword(s):  
Power System ◽  
North American ◽  
Response Times ◽  
Transmission System ◽  
Energy Delivery ◽  
The North ◽  
System Components ◽  
Bulk Power ◽  
Definition Of ◽  
The Relationship

Modern risk analysis studies of the power system increasingly rely on big datasets, either synthesized, simulated, or real utility data. Particularly in the transmission system, outage events have a strong influence on the reliability, resilience, and security of the overall energy delivery infrastructure. In this paper we analyze historical outage data for transmission system components and discuss the implications of nearby overlapping outages with respect to resilience of the power system. We carry out a risk-based assessment using North American Electric Reliability Corporation (NERC) Transmission Availability Data System (TADS) for the North American bulk power system (BPS). We found that the quantification of nearby unscheduled outage clusters would improve the response times for operators to readjust the system and provide better resilience still under the standard definition of N-1 security. Finally, we propose future steps to investigate the relationship between clusters of outages and their electrical proximity, in order to improve operator actions in the operation horizon.

scholarly journals Definitions and Concepts for Quantitative Rockfall Hazard and Risk Analysis

Geosciences ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 158
Author(s):  
Didier Hantz ◽  
Jordi Corominas ◽  
Giovanni B. Crosta ◽  
Michel Jaboyedoff
Keyword(s):  
Risk Assessment ◽  
At Risk ◽  
Failure Probability ◽  
Rockfall Hazard ◽  
Process Failure ◽  
Failure Propagation ◽  
Element At Risk ◽  
Hazard And Risk ◽  
Hazard And Risk Assessment ◽  
Definition Of

There is an increasing need for quantitative rockfall hazard and risk assessment that requires a precise definition of the terms and concepts used for this particular type of landslide. This paper suggests using terms that appear to be the most logic and explicit as possible and describes methods to derive some of the main hazards and risk descriptors. The terms and concepts presented concern the rockfall process (failure, propagation, fragmentation, modelling) and the hazard and risk descriptors, distinguishing the cases of localized and diffuse hazards. For a localized hazard, the failure probability of the considered rock compartment in a given period of time has to be assessed, and the probability for a given element at risk to be impacted with a given energy must be derived combining the failure probability, the reach probability, and the exposure of the element. For a diffuse hazard that is characterized by a failure frequency, the number of rockfalls reaching the element at risk per unit of time and with a given energy (passage frequency) can be derived. This frequency is relevant for risk assessment when the element at risk can be damaged several times. If it is not replaced, the probability that it is impacted by at least one rockfall is more relevant.

scholarly journals Proposing 3D Thermal Technology for Heritage Building Energy Monitoring

2021 ◽  
Vol 13 (8) ◽  
pp. 1537
Author(s):  
Antonio Adán ◽  
Víctor Pérez ◽  
José-Luis Vivancos ◽  
Carolina Aparicio-Fernández ◽  
Samuel A. Prieto
Keyword(s):  
Computer Vision ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Building Energy ◽  
Energy Monitoring ◽  
3D Computer Vision ◽  
Building Monitoring ◽  
Heritage Buildings ◽  
Heritage Building ◽  
Definition Of

The energy monitoring of heritage buildings has, to date, been governed by methodologies and standards that have been defined in terms of sensors that record scalar magnitudes and that are placed in specific positions in the scene, thus recording only some of the values sampled in that space. In this paper, however, we present an alternative to the aforementioned technologies in the form of new sensors based on 3D computer vision that are able to record dense thermal information in a three-dimensional space. These thermal computer vision-based technologies (3D-TCV) entail a revision and updating of the current building energy monitoring methodologies. This paper provides a detailed definition of the most significant aspects of this new extended methodology and presents a case study showing the potential of 3D-TCV techniques and how they may complement current techniques. The results obtained lead us to believe that 3D computer vision can provide the field of building monitoring with a decisive boost, particularly in the case of heritage buildings.

scholarly journals Multi-Use of the Sea as a Sustainable Development Instrument in Five EU Sea Basins

2021 ◽  
Vol 13 (15) ◽  
pp. 8159
Author(s):  
Joanna Przedrzymirska ◽  
Jacek Zaucha ◽  
Helena Calado ◽  
Ivana Lukic ◽  
Martina Bocci ◽  
...  
Keyword(s):  
Sustainable Development ◽  
Baltic Sea ◽  
Spatial Planning ◽  
Economic Benefits ◽  
The Black Sea ◽  
The North ◽  
The North Sea ◽  
Maritime Spatial Planning ◽  
Definition Of ◽  
The Impact

This paper examines the concept of maritime multi-use as a territorial/SPATIAL governance instrument for the enhancement of sustainable development in five EU sea basins. Multi-use (MU) is expected to enhance the productivity of blue economy sectors, as well as deliver additional socio-economic benefits related to the environmental and social dimensions of sustainable development. The paper provides a definition of maritime multi-use and identifies the multi-uses with the highest potential in EU sea basins. In each sea basin, multi-use plays a different role as concerns sustainable development. For the Eastern Baltic Sea, the Mediterranean Sea and the Black Sea, the MU focus should remain on the environmental pillar of sustainable development. In the North Sea, North Atlantic and Western Baltic Sea, addressing social sustainability seems a key precondition for success of MU in enhancement of sustainable spatial development at sea. Moreover, it has been suggested to introduce MU key global strategies such as SDGs or Macroregional strategies and action plans and to supplement maritime spatial planning with sectoral incentives and educational efforts as key vehicles supporting MU. The paper concludes by identifying aspects which, in order to inform maritime spatial planning and maritime governance regarding a more conscious application of the aforementioned concept, require further investigation. Key tasks are related to: more profound evaluation of performance of policies supporting MUs, researching the impact of MU on societal goals and on the MU costs and benefits, including external ones, and finally identifying the impact of MU on the development of various sectors and regions on land.

scholarly journals Three-dimensional deformation time series of glacier motion from multiple-aperture DInSAR observation

2019 ◽  
Vol 93 (12) ◽  
pp. 2651-2660 ◽  
Author(s):  
Sergey Samsonov
Keyword(s):  
Time Series ◽  
Surface Deformation ◽  
Ground Deformation ◽  
Three Dimensional ◽  
Data Sets ◽  
Ice Flow ◽  
The North ◽  
Glacier Ice ◽  
Deformation Component ◽  
3D Deformation

AbstractThe previously presented Multidimensional Small Baseline Subset (MSBAS-2D) technique computes two-dimensional (2D), east and vertical, ground deformation time series from two or more ascending and descending Differential Interferometric Synthetic Aperture Radar (DInSAR) data sets by assuming that the contribution of the north deformation component is negligible. DInSAR data sets can be acquired with different temporal and spatial resolutions, viewing geometries and wavelengths. The MSBAS-2D technique has previously been used for mapping deformation due to mining, urban development, carbon sequestration, permafrost aggradation and pingo growth, and volcanic activities. In the case of glacier ice flow, the north deformation component is often too large to be negligible. Historically, the surface-parallel flow (SPF) constraint was used to compute the static three-dimensional (3D) velocity field at various glaciers. A novel MSBAS-3D technique has been developed for computing 3D deformation time series where the SPF constraint is utilized. This technique is used for mapping 3D deformation at the Barnes Ice Cap, Baffin Island, Nunavut, Canada, during January–March 2015, and the MSBAS-2D and MSBAS-3D solutions are compared. The MSBAS-3D technique can be used for studying glacier ice flow at other glaciers and other surface deformation processes with large north deformation component, such as landslides. The software implementation of MSBAS-3D technique can be downloaded from http://insar.ca/.

New Views on the Fremont: The Fremont and the Sevier: Defining Prehistoric Agriculturalists North of the Anasazi

1979 ◽  
Vol 44 (4) ◽  
pp. 711-722 ◽  
Author(s):  
David B. Madsen
Keyword(s):  
Great Basin ◽  
Settlement Patterns ◽  
Colorado Plateau ◽  
Explicit Definition ◽  
Taxonomic Level ◽  
The North ◽  
Subsistence Economies ◽  
Definition Of

A satisfactory and explicit definition of the Fremont has not been produced in over 50 years of research—a failure which suggests that no comprehensive entity exists. Attempts to define a Fremont through the use of trait lists have failed, although such lists have provided the basis for three apparently conflicting theories of origin. Analyses of subsistence economies and settlement patterns suggest that no comprehensive entity exists and that all three origin theories may possibly be valid. A Sevier "culture," based on marsh collecting and supplemented by corn agriculture, can be defined in the eastern Great Basin. A Fremont "culture," based on corn agriculture and supplemented by hunting, can be defined on the Colorado Plateau. A third unnamed, but possibly Plains-related, culture may be defined to the north of these. These "cultures" are distinctive enough to be separated on the same taxonomic level as are the Anasazi and the Sinagua.

Sign in / Sign up

Export Citation Format

Share Document