scholarly journals INFLUENCE OF USING ALTERNATIVE TYPES OF FUEL ON CHARACTERISTICS OF WORKING PROCESSES OF INTERNAL COMBUSTION ENGINES

2018 ◽  
pp. 24-32 ◽  
Author(s):  
Sergei Pavlovich Glushkov ◽  
Victor Ivanovich Kochergin ◽  
Vasiliy Victorovich Krasnikov
Keyword(s):  
Combustion Chamber ◽  
Synthesis Gas ◽  
Internal Combustion Engines ◽  
Pressure Rise ◽  
Hydrocarbon Fuel ◽  
Internal Combustion ◽  
Intake Manifold ◽  
Combustion Engines ◽  
Combustion Heat ◽  
Working Processes

In application of alternative types of fuel it is necessary to consider the influence of changing specific heat of fuel combustion and a process of fuel supply on parameters of working processes and external characteristics of internal combustion engines. Besides, it is necessary to consider a possible emergence of backfires in the inlet pipeline and increasing concentration of nitrogen oxides as temperature raises in the combustion chamber. It is offered to consider the influence of changing the kinetics of fuel burning under the change of fuel-air mixture composition on the process of pressure rise in the combustion chamber and, therefore, on the speed and acceleration of the piston, size of an impulse of moving parts, parameters of irregularity of rotating speed and vibration loading of the engine. In terms of using hydrogenous synthesis gas, there has been carried out the analysis of possible influence of its main components on parameters of working process of the engine. The results of theoretical calculation of an increase of combustion heat of working mixture and of pilot testing prove an increase of combustion heat and decrease of total fuel consumption at different levels of feeding synthesis gas to the engine intake manifold. The need to observe a certain proportion of hydrogen supply relative to the main hydrocarbon fuel has been noted. The research results prove that changing characteristics of the fuel used leads to a change of a type of vibration load of the power unit.

Maximum efficiencies for internal combustion engines: Thermodynamic limitations

2017 ◽  
Vol 19 (10) ◽  
pp. 1005-1023 ◽  
Author(s):  
Jerald A Caton
Keyword(s):  
Heat Transfer ◽  
Internal Combustion Engines ◽  
High Efficiency ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Thermodynamic Evaluation ◽  
Combustion Engines ◽  
Automotive Engine ◽  
Specific Heats ◽  
Cycle Simulation

The thermodynamic limitation for the maximum efficiencies of internal combustion engines is an important consideration for the design and development of future engines. Knowing these limits helps direct resources to those areas with the most potential for improvements. Using an engine cycle simulation which includes the first and second laws of thermodynamics, this study has determined the fundamental thermodynamics that are responsible for these limits. This work has considered an automotive engine and has quantified the maximum efficiencies starting with the most ideal conditions. These ideal conditions included no heat losses, no mechanical friction, lean operation, and short burn durations. Then, each of these idealizations is removed in a step-by-step fashion until a configuration that represents current engines is obtained. During this process, a systematic thermodynamic evaluation was completed to determine the fundamental reasons for the limitations of the maximum efficiencies. For the most ideal assumptions, for compression ratios of 20 and 30, the thermal efficiencies were 62.5% and 66.9%, respectively. These limits are largely a result of the combustion irreversibilities. As each of the idealizations is relaxed, the thermal efficiencies continue to decrease. High compression ratios are identified as an important aspect for high-efficiency engines. Cylinder heat transfer was found to be one of the largest impediments to high efficiency. Reducing cylinder heat transfer, however, is difficult and may not result in much direct increases of piston work due to decreases of the ratio of specific heats. Throughout this work, the importance of high values of the ratio of specific heats was identified as important for achieving high thermal efficiencies. Depending on the selection of constraints, different values may be given for the maximum thermal efficiency. These constraints include the allowed values for compression ratio, heat transfer, friction, stoichiometry, cylinder pressure, and pressure rise rate.

Effect of Engine Operating Parameters on Combustion and Emission Characteristics

1992 ◽  
Author(s):  
Jiang Lu ◽  
Ashwani K. Gupta ◽  
Eugene L. Keating
Keyword(s):  
Internal Combustion Engine ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Internal Combustion ◽  
Operating Parameters ◽  
Emission Characteristics ◽  
Pollutants Emission

Abstract Numerical simulation of flow, combustion, heat release rate and pollutants emission characteristics have been obtained using a single cylinder internal combustion engine operating with propane as the fuel. The data are compared with experimental results and show excellent agreement for peak pressure and the rate of pressure rise as a function of crank angle. The results obtained for NO and CO are also found to be in good agreement and are similar to those reported in the literature for the chosen combustion chamber geometry. The results have shown that both the combustion chamber geometry and engine operating parameters affects the flame growth within the combustion chamber which subsequently affects the pollutants emission levels. The code employed the time marching procedure and solves the governing partial differential equations of multi-component chemically reacting fluid flow by finite difference method. The numerical results provide a cost effective means of developing advanced internal combustion engine chamber geometry design that provides high efficiency and low pollution levels. It is expected that increased computational tools will be used in the future for enhancing our understanding of the detailed combustion process in internal combustion engines and all other energy conversion systems. Such detailed information is critical for the development of advanced methods for energy conservation and environmental pollution control.

A General Rezoning Technique for KIVA3V Internal Combustion Engines CFD Simulations

2010 ◽  
Author(s):  
Randy P. Hessel ◽  
Ettore Musu ◽  
Salvador M. Aceves ◽  
Daniel L. Flowers
Keyword(s):  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Ad Hoc ◽  
National Laboratory ◽  
Internal Combustion ◽  
Computational Time ◽  
Combustion Engines ◽  
Combustion Chambers ◽  
Time Step ◽  
Engine Cycle

A computational mesh is required when performing CFD-combustion modeling of internal combustion engines. For combustion chambers with moving pistons and valves, like those in typical cars and trucks, the combustion chamber shape changes continually in response to piston and valve motion. The combustion chamber mesh must then also change at each time step to reflect that change in geometry. The method of changing the mesh from one computational time step to the next is called rezoning. This paper introduces a new method of mesh rezoning for the KIVA3V CFD-combustion program. The standard KIVA3V code from Los Alamos National Laboratory comes with standard rezoners that very nicely handle mesh motion for combustion chambers whose mesh does not include valves and for those with flat heads employing vertical valves. For pent-roof and wedge-roof designs KIVA3V offers three rezoners to choose from, the choice depending on how similar a combustion chamber is to the sample combustion chambers that come with KIVA3V. Often, the rezoners must be modified for meshes of new combustion chamber geometries to allow the mesh to successfully capture change in geometry during the full engine cycle without errors. There is no formal way to approach these modifications; typically this requires a long trial and error process to get a mesh to work for a full engine cycle. The benefit of the new rezoner is that it replaces the three existing rezoners for canted valve configurations with a single rezoner and has much greater stability, so the need for ad hoc modifications of the rezoner is greatly reduced. This paper explains how the new rezoner works and gives examples of its use.

scholarly journals THE COMBUSTION ENGINE INTAKE MANIFOLD CFD MODELING DEPENDING ON THE AIRBOX CONFIGURATION

2021 ◽  
Vol 2021 (6) ◽  
pp. 5421-5425
Author(s):  
MICHAL RICHTAR ◽  
◽  
PETRA MUCKOVA ◽  
JAN FAMFULIK ◽  
JAKUB SMIRAUS ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Stationary Flow ◽  
Cfd Modeling ◽  
Intake Manifold ◽  
Combustion Engines ◽  
Computational Fluid Dynamics Cfd

The aim of the article is to present the possibilities of application of computational fluid dynamics (CFD) to modelling of air flow in combustion engine intake manifold depending on airbox configuration. The non-stationary flow occurs in internal combustion engines. This is a specific type of flow characterized by the fact that the variables depend not only on the position but also on the time. The intake manifold dimension and geometry strongly effects intake air amount. The basic target goal is to investigate how the intake trumpet position in the airbox impacts the filling of the combustion chamber. Furthermore, the effect of different distances between the trumpet neck and the airbox wall in this paper will be compared.

scholarly journals Hydrogen application in internal combustion engines

2020 ◽  
Vol 21 (1) ◽  
pp. 14-19
Author(s):  
Arthur R. Asoyan ◽  
Igor K. Danilov ◽  
Igor A. Asoyan ◽  
Georgy M. Polishchuk
Keyword(s):  
Burning Rate ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Hydrocarbon Fuel ◽  
Internal Combustion ◽  
Technical Solution ◽  
Combustion Engines ◽  
Environmental Friendliness ◽  
Petroleum Origin ◽  
Order Of Magnitude

A technical solution has been proposed to reduce the consumption of basic hydrocarbon fuel, to improve the technical, economic and environmental performance of internal combustion engines by affecting the combustion process of the fuel-air mixture with a minimum effective mass fraction of hydrogen additive in the fuel-air mixture. The burning rate of hydrogen-air mixtures is an order of magnitude greater than the burning rate of similar mixtures based on gasoline or diesel fuel, compared with the former, they are favorably distinguished by their greater detonation stability. With minimal additions of hydrogen to the fuel-air charge, its combustion time is significantly reduced, since hydrogen, having previously mixed with a portion of the air entering the cylinder and burning itself, effectively ignites the mixture in its entirety. Issues related to the accumulation of hydrogen on board the car, its storage, explosion safety, etc., significantly inhibit the development of mass production of cars using hydrogen fuel. The described technical solution allows the generation of hydrogen on board the car and without accumulation to use it as an additive to the main fuel in internal combustion engines. The technical result is to reduce the consumption of hydrocarbon fuels (of petroleum origin) and increase the environmental friendliness of the car due to the reduction of the emission of harmful substances in exhaust gases.

Thermophysical Properties of Working Substance and Heat Transfer in a Hydrogen Combustion Engine

2003 ◽  
Author(s):  
T. Shudo ◽  
H. Oka
Keyword(s):  
Heat Transfer ◽  
Combustion Chamber ◽  
Heat Loss ◽  
Thermophysical Properties ◽  
Internal Combustion Engines ◽  
Internal Combustion ◽  
Spark Ignition ◽  
Hydrogen Combustion ◽  
Spark Ignition Engine ◽  
Combustion Engines

Hydrogen is a clean alternative to fossil fuels for internal combustion engines and can be easily used in spark-ignition engines. However, the characteristics of the engines fueled with hydrogen are largely different from those with conventional hydrocarbon fuels. A higher burning velocity and a shorter quenching distance for hydrogen as compared with hydrocarbons bring a higher degree of constant volume and a larger heat transfer from the burning gas to the combustion chamber wall of the engines. Because of the large heat loss, the thermal efficiency of an engine fueled with hydrogen is sometimes lower than that with hydrocarbons. Therefore, the analysis and the reduction of the heat loss are crucial for the efficient utilization of hydrogen in internal combustion engines. The empirical correlations to describe the total heat transferred from the burning gas to the combustion chamber walls are often used to calculate the heat loss in internal combustion engines. However, the previous research by one of the authors has shown that the widely used heat transfer correlations cannot be properly applied to the hydrogen combustion even with adjusting the constants in them. For this background, this research analyzes the relationship between characteristics of thermophysical properties of working substance and heat transfer to the wall in a spark-ignition engine fueled with hydrogen.

Intake Air Path Diagnostics for Internal Combustion Engines

2006 ◽  
Vol 129 (1) ◽  
pp. 32-40 ◽  
Author(s):  
Matthew A. Franchek ◽  
Patrick J. Buehler ◽  
Imad Makki
Keyword(s):  
Steady State ◽  
Internal Combustion Engines ◽  
Air Flow ◽  
Internal Combustion ◽  
Flow Sensor ◽  
Path Model ◽  
Intake Manifold ◽  
Fault Estimation ◽  
Combustion Engines ◽  
Sensor Measurement

Presented is the detection, isolation, and estimation of faults that occur in the intake air path of internal combustion engines during steady state operation. The proposed diagnostic approach is based on a static air path model, which is adapted online such that the model output matches the measured output during steady state conditions. The resulting changes in the model coefficients create a vector whose magnitude and direction are used for fault detection and isolation. Fault estimation is realized by analyzing the residual between the actual sensor measurement and the output of the original (i.e., healthy) model. To identify the structure of the steady state air path model a process called system probing is developed. The proposed diagnostics algorithm is experimentally validated on the intake air path of a Ford 4.6L V-8 engine. The specific faults to be identified include two of the most problematic faults that degrade the performance of transient fueling controllers: bias in the mass air flow sensor and a leak in the intake manifold. The selected model inputs include throttle position and engine speed, and the output is the mass air flow sensor measurement.

Sign in / Sign up

Export Citation Format

Share Document