scholarly journals KARAKTERISTIK STRUKTUR DAN SIFAT KIMIA PRODUK BIOGENIK RAYAP SCHEDORHINOTERMES SPP DARI CAMPURAN LIMBAH KERTAS KORAN DENGAN LIMBAH PENGOLAHAN TAHU

PERENNIAL ◽  
2019 ◽  
Vol 15 (2) ◽  
pp. 83
Author(s):  
Andi Sri Rahayu Diza Lestari A ◽  
Musrizal Muin ◽  
Astuti Arif
Keyword(s):  
Chemical Properties ◽  
Dry Weight ◽  
Organic Content ◽  
Food Sources ◽  
Sample Container ◽  
Sample Unit ◽  
Aggregate Fraction ◽  
Biogenic Structures ◽  
Processing Wastes ◽  
And Chemical Properties

Biological activity of termites consistently generates various biogenic products depend of the type of food sources. Furthermore, the biogenic product is believed to have an important role in the improvement of soil physical and chemical properties. The purpose of this study is to determine the structure and chemical properties of biogenic products resulted from the activity of termites Schedorhinotermes spp. using newsprint paper and tofu processing wastes as food sources. Newsprint paper waste was mixed with tofu processing wastes water at a different levels, i.e. 10 %, 20 %, and 30 % (w/v) for the objective of study. Each of the mixture with weight of 18,8 g equivalent to oven dry weight was then placed in the sample container unit size 6 x 6 cm, placed at about 3 cm underground with the indicated of termite Schedorhinotermes spp activity, and covered by PVC stopper. The testing unit were left in place for about 6 weeks to allow the termite attacks. The attacked sample unit were then analyzed for their structure and chemical properties including bulk density, aggregate fraction distribution, pH, C-organic content. The soil around the sample unit were took using a 7 cm diameter ground ring to be used as a reference or comparison with biogenic structures formed by termites. The result showed that the biogenic products have better structure and chemical compared to the its surrounding soil.

scholarly journals STUDY AND ESTIMATION OF THE RATIO OF 137CS AND 40K SPECIFIC ACTIVITIES IN SANDY AND LOAM SOILS / 137CS IR 40K SAVITŲJŲ AKTYVUMŲ SANTYKIŲ TYRIMAS IR VERTINIMAS PRIESMĖLIO IR PRIEMOLIO DIRVOŽEMYJE

2011 ◽  
Vol 3 (5) ◽  
pp. 37-42
Author(s):  
Renata Mikalauskienė ◽  
Donatas Butkus ◽  
Ingrida Pliopaitė Bataitienė
Keyword(s):  
Chemical Properties ◽  
Dry Weight ◽  
Soil Samples ◽  
Physical And Chemical Properties ◽  
Nuclear Testing ◽  
Specific Activities ◽  
Physical And Chemical ◽  
Chernobyl Nuclear Plant ◽  
Properties Of Soil ◽  
And Chemical Properties

The present article describes changes in specific activities and fluctuations in the ratio of natural 40K and artificial 137Cs radionuclides in soil samples taken from different places of Lithuanian territory. The samples of soil have been selected from the districts polluted after the accident in Chernobyl nuclear plant performing nuclear testing operations. The study has established the main physical and chemical properties of soil samples and their impact on the concentration of 40K activities. 137Cs/40K specific activities in soil have been observed under the dry weight of the sample that varied from 0.0034 to 0.0240. The results of the study could be used for establishing and estimating 137Csand 40K transfer in the system “soil-plant”. Santrauka Straipsnyje nagrinėjama gamtinės (40K) ir dirbtinės (137Cs) kilmės radionuklidų savitųjų aktyvumų ir jų santykio kaita skirtinguose Lietuvos teritorijos dirvožemiuose. Dirvožemio mėginiai parinkti iš vietovių, kurios buvo labiau užterštos po Černobylio atominės elektrinės avarijos ir buvusių branduolinių bandymų. Tyrimo metu nustatytos pagrindinės fizinės cheminės dirvožemio savybės ir jų poveikis 40K aktyvumų koncentracijai. 137Csir 40K savitieji aktyvumai dirvožemyje tirti esant sausam mėginio svoriui. 137Cs savitieji aktyvumai sausame dirvožemyje svyravo nuo 1,1±1,0 iki 14,3±0,9 Bq/kg, o 40K savitieji aktyvumai – nuo 326±29 iki 740±15 Bq/kg. 137Csir 40K savitųjų aktyvumų santykis skirtingų vietovių dirvožemiuose kito nuo 0,0034 iki 0,0240 Bq/kg. Tyrimo rezultatai gali būti panaudoti, nustatant ir įvertinant 137Csir 40K pernašą sistemoje dirvožemis–augalai.

Laboratory Measurement of CO2 Emissions from Agricultural Waste Burning in Northeastern Thailand

2012 ◽  
Vol 241-244 ◽  
pp. 204-207
Author(s):  
Nongnaphat Khosavithitkul ◽  
Kenneth J. Haller ◽  
Nares Chuersuwan ◽  
Thananchai Wannasook
Keyword(s):  
Agricultural Waste ◽  
Chemical Properties ◽  
Dry Weight ◽  
Agricultural Residues ◽  
Physical And Chemical Properties ◽  
Agricultural Residue ◽  
Waste Burning ◽  
Physical And Chemical ◽  
Northeastern Thailand ◽  
And Chemical Properties

One hundred and thirty-seven samples of agricultural residue were taken from the study area of forty subdistricts in twenty districts of ten provines in the Northeastern region of Thailand. The samples were analyzed for major physical and chemical properties and subjected to simulated burning. Rice straw had the highest dry weight and bagasse the lowest. Bagasse had the highest moisture content and the highest carbon content. Results from simulated burning found that sugarcane leaf emitted more CO2 than the other residues. Weight loss on combustion was in the range of 75-92 %, and the simulated burn of agricultural residues showed CO2 emission values at 67% of the IPCC values.

scholarly journals Influence of wood-derived biochar on the physico-mechanical and chemical characteristics of agricultural soils

2018 ◽  
Vol 32 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Ahmed S.F. Ahmed ◽  
Vijaya Raghavan
Keyword(s):  
Agricultural Soils ◽  
Sandy Loam ◽  
Chemical Properties ◽  
Dry Weight ◽  
Crop Productivity ◽  
Clay Loam ◽  
Clay Loam Soil ◽  
Loam Soil ◽  
Specific Influence ◽  
And Chemical Properties

AbstractAmendment of soil with biochar has been shown to enhance fertility and increase crop productivity, but the specific influence of biochar on soil workability remains unclear. Select physico-mechanical and chemical properties of clay loam and sandy loam soils were measured after amendment with wood-derived biochar of two particle size ranges (0.5-425 and 425-850 µm) at five dosages ranging from 0.5 to 10% dry weight. Whereas the clay loam soil workability decreased when the finer wood-derived biochar was applied at rates of 6 or 10%, soil fertility was not enhanced. The sandy loam soil, due to Proctor compaction, significantly decreased in bulk density with 6 and 10% wood-derived biochar amendments indicating higher soil resistance to compaction.

First insights into the biochemistry ofSabella spallanzanii(Annelida: Polychaeta) mucus: a potentially unexplored resource for applicative purposes

2010 ◽  
Vol 91 (1) ◽  
pp. 199-208 ◽  
Author(s):  
Loredana Stabili ◽  
Roberto Schirosi ◽  
Angela Di Benedetto ◽  
Alessandro Merendino ◽  
Luciano Villanova ◽  
...  
Keyword(s):  
Marine Invertebrates ◽  
Vibrio Anguillarum ◽  
Chemical Properties ◽  
Dry Weight ◽  
Physical And Chemical Properties ◽  
Total Lipids ◽  
And Function ◽  
Physical And Chemical ◽  
And Chemical Properties

Although mucus plays many different roles among marine invertebrates, relatively little is known about the link between biochemical structure and function. In the present study we focused on some physical and chemical properties of the polychaeteSabella spallanzanii's mucus such as viscosity, osmolarity, electrical conductivity, elemental composition, the protein and carbohydrate content, the total lipids and fatty acid composition, and polychlorinated biphenyls (PCBs) contamination. Moreover, an antimicrobial activity of the mucus was investigated. The water content ofS. spallanzaniimucus was 96.2±0.3%. By dry weight 26±1.2% was protein, 8±0.21% was carbohydrate and only 0.1% lipid, much of the remainder of the dry weight was inorganic (about 65.2%). The estimated PCBs content was <0.005 μg g−1. The mucus ofS. spallanzaniiexerted a natural lysozyme-like activity and producedin vitrothe growth inhibition ofVibrio anguillarum, Vibrio harveyi, Pseudomonas aeruginosaandCandida albicans.The findings from this study contribute to improve the limited knowledge available on the mucus composition in invertebrates and have implications for future investigations related to employment ofS. spallanzaniimucus as a source of compounds of pharmaceutical and marine technological interest.

scholarly journals MEDIA ROOT TRAINER MENGANDUNG COCOPEAT DAN GAMBUT MENDUKUNG PERTUMBUHAN DAN KUALITAS AKAR BATANG BAWAH KARET / Root Trainer Media Containing Cocopeat and Peat to Support Growth and Quality of Rubber Rootstock Roots

2020 ◽  
Vol 26 (1) ◽  
pp. 23
Author(s):  
Nur Eko Prasetyo ◽  
Budi Setyawan ◽  
Samijan Samijan ◽  
Nofitri Dewi Rinojati ◽  
Sumarmadji Sumarmadji
Keyword(s):  
Plant Growth ◽  
Block Design ◽  
Chemical Properties ◽  
Dry Weight ◽  
Organic Content ◽  
Exchange Capacity ◽  
Duncan Multiple Range Test ◽  
Randomized Block Design ◽  
Physical And Chemical ◽  
Range Test

<p>The physical and chemical properties of the growing medium for <em>root trainer</em> of rubber are critical to support plant growth. This study aimed to obtain the best medium for growing rootstock rubber seedlings in the <em>root trainer</em>.  Rubber clone PR 300 seeds were germinated for 21 days, then raised in <em>root trainer</em> pots for five months. The treatments evaluated were a mixture of <em>cocopeat</em>, Rawapening peat, and manure at different ratios.  The experiment was designed in a Randomized Block Design, three replications, 30 plants per replicate, totaling 720 plants. The observed variables were N, P, K, Mg, C-organic content, pH, and cation exchange capacity of <em>cocopeat</em>, peat, and manure, as well as plant growth (height, stem diameter, wet weight, and dry weight). ANOVA used for analyzing data, followed with the <em>Duncan Multiple Range Test</em> at 5% level. The results showed that there were three best <em>root trainer</em> media for PR 300 rubber rootstock seedlings were a mixture of <em>cocopeat</em> + peat (1:1), <em>cocopeat</em> + peat + manure (1:2:1), and <em>cocopeat</em> + peat + manure (2:1:1). The growth and compactness of the roots are outstanding, so the seedlings are easily removed from the <em>root </em><em>trainer</em> pots without significant damage. Based on the initiation and cost, the best <em>root trainer</em> medium is a mixture of <em>cocopeat</em> + peat + manure (1: 2:1). It is necessary to study the use of other types of peat soils apart from Rawapening. Also, it needs to be observed further plant growth after inoculation with the stem and after planting in the field.</p><p><strong>Keywords </strong>: Planting medium, Rawapening peat, rubber clone PR 300.<em></em></p><p><em><br /></em></p><p><strong>Abstrak<br /></strong></p><p>Sifat fisik dan kimia media tanam di dalam wadah <em>root trainer</em> bibit karet sangat penting untuk mendukung pertumbuhan tanaman. Penelitian ini bertujuan mendapatkan media terbaik untuk pertumbuhan bibit batang bawah karet di dalam <em>root trainer</em>.  Benih klon karet PR 300 dikecambahkan selama 21 hari pada bedeng pengecambahan kemudian dipindah-tanam dan dibesarkan selama 5 bulan dalam pot <em>root trainer</em>. Perlakuannya yaitu campuran <em>cocopeat</em>, gambut Rawapening, dan pupuk kandang (pukan) pada berbagai ratio, dan kontrol. Penelitian dirancang secara Acak Kelompok, tiga ulangan, masing-masing 30 tanaman, sehingga totalnya 720 tanaman. Variabel yang diamati yaitu kandungan N, P, K, Mg, C-organik, pH, dan kapasitas tukar kation dari <em>cocopeat</em>, gambut, dan pupuk kandang, serta pertumbuhan tanaman (tinggi, diameter batang, bobot segar, dan bobot kering). Data dianalisis dengan ANOVA, kemudian <em>Duncan Multiple Range Test</em> pada taraf 5%. Hasil penelitian menunjukkan bahwa ada tiga macam media <em>root trainer</em> terbaik untuk bibit batang bawah karet klon PR 300 yaitu campuran <em>cocopeat </em>+ gambut (1:1), <em>cocopeat </em>+ gambut + pukan (1:2:1), dan <em>cocopeat </em>+ gambut + pukan (2:1:1). Pertumbuhan dan kekompakan akar sangat baik sehingga bibit mudah dilepas dari <em>root tainer</em> tanpa kerusakan berarti. Berdasarkan kepraktisan dan biaya maka media <em>root trainer</em> terbaik adalah campuran media <em>cocopeat </em>+ gambut + pukan (1:2:1). Perlu dilakukan kajian mengenai pemanfaatan tanah gambut jenis lainnya selain dari Rawapening. Selain itu, juga perlu diamati lebih lanjut pertumbuhan tanaman setelah diokulasi dengan batang atas maupun setelah ditanam di lapangan.</p><p><strong>Kata kunci </strong>: Gambut Rawapening, klon karet PR 300, media tanam.</p>

scholarly journals EFFECTS OF IRRIGATION FREQUENCY ON PLANT GROWTH AND NUTRIENT LEVELS OF PINE BARK MEDIA

HortScience ◽  
1990 ◽  
Vol 25 (8) ◽  
pp. 849c-849
Author(s):  
T.E. Bilderback
Keyword(s):  
Plant Growth ◽  
Shoot Growth ◽  
Chemical Properties ◽  
Dry Weight ◽  
Pine Bark ◽  
Growth Responses ◽  
Irrigation Frequency ◽  
Foliar Tissue ◽  
Physical And Chemical ◽  
And Chemical Properties

Ilex × `Nellie R. Stevens' holly, Rhododendron sp. `Hinodegeri' azalea and Pyracantha coccinea, scarlet firethorn rooted cuttings were potted in • 3.81 containers. Irrigation was applied by Dram rings daily, or every 2,4,or 6 days. Approximately 1000 ml of water were applied at each irrigation. Three container media, including pine bark, and pine bark amended with either Terra-Sorb AG synthetic moisture extender incorporated at 1.2 kg/m3 or Aqua-Gro G wetting agent incorporated at 0.9 kg/m3 plus monthly drenches of 700 ml of 2500 ppm Aqua-Gro L were compared for physical and chemical properties and plant growth responses. Decreasing irrigation decreased pH, increased nutrient leachate levels, and increased foliar tissue levels of N,P,K,Ca,and Fe in holly and azalea. Pyracantha top and root dry weight was reduced at 4 and 6 day irrigation intervals, holly top growth was reduced by 6 day and azalea had greatest shoot growth at 2 day irrigation and was reduced by other irrigation frequencies. Top growth of all 3 species and root growth of pyracantha was reduced in the pine bark treatment.

scholarly journals PENGARUH DOSIS PUPUK KASCING DAN NITROGEN TERHADAP PERTUMBUHAN DAN HASIL TANAMAN SELADA (LACTVCA SATIVA L.) VAR GEORGIA

AGRICA ◽  
2020 ◽  
Vol 1 (2) ◽  
pp. 38-43
Author(s):  
Ketut Turaini Indra Winten
Keyword(s):  
Physical Properties ◽  
Block Design ◽  
Chemical Properties ◽  
Dry Weight ◽  
Soil Physical Properties ◽  
Organic Content ◽  
Growth And Yield ◽  
Optimum Rate ◽  
Nitrogen Rates ◽  
Physical And Chemical

The low of growth and yield of lettuce is quite often caused by the low of soil fertility, especially nitrogen and C-organic content. Poor soil physical properties also contribute to the cause of low yield of lettuce. Improved soil physical and chemical properties by adding casting fertilizers and nitrogen are expected to be able to increase the yields of lettuce. The field experiment was conducted in Candikuning village, district of Baturiti, Tabanan regency, from October 2005 to January 2006. The objective of the experiment was to study the effect of casting fertilizer and nitrogen rates on the growth and yields of lettuce. A randomized complete block design was used in this experiment and two treatment factors were imposed. Those two treatment factors were rates of casting fertilizers (i.e. 0, 10, 20 and 30 t ha"1 ) and rates of N (i.e. 0, 92, 138 and 184 kg N ha"1), which were arranged factorially and repeated three times. Results of the experiment indicated that interaction between casting fertilizer and nitrogen rates did not significantly affect the yields of lettuce. The rates of N only significantly affected several growth variables and the oven-dry weight of heads plant-1. Increased rates of N from 0 to 92 kg N ha-1 significantly resulted in the oven-dry weight of heads of 2.798 g plant-1 which was 13.9% higher than that of 0 kg N ha-1. Rates of casting fertilizer significantly affected head diameter and the oven-dry weight of heads plant"1 and ha-1. Increased rates of casting fertilizer from 0 to 10 t ha-1 gave the oven-dry weight of heads as much as 0.232 t ha"1 or 9.43% higher than the weight given by the rate of 0 t ha-1. The effects of rates of casting fertilizer and N were only significant on several soil physical properties. The relationship between rates of casting fertilizer and yields of lettuce was quadratic (Y = 0.21135 + 0.0032 X - 0.001 X2 ; R2 = 0.981). The optimum rate of casting fertilizer was 16.0 t ha-1 with the maximum oven-dry weight of heads of 0.237 t ha-1, meanwhile, the optimum rate of N had not obtained in this experiment.

scholarly journals Arcillite: Effect on Chemical and Physical Properties of Pine Bark Substrate and Plant Growth

1992 ◽  
Vol 10 (2) ◽  
pp. 63-69 ◽  
Author(s):  
Stuart L. Warren ◽  
Ted E. Bilderback
Keyword(s):  
Plant Growth ◽  
Chemical Properties ◽  
Total Porosity ◽  
Dry Weight ◽  
Pine Bark ◽  
Irrigation Frequency ◽  
Shoot Dry Weight ◽  
Air Space ◽  
Physical And Chemical ◽  
And Chemical Properties

Abstract The objective of this study was to determine the effect of arcillite, a calcined montmorillonite and illite clay, on the physical and chemical properties of a pine bark growth substrate and plant growth. To accomplish this, Cotoneaster dammeri ‘Skogholm’ and Rhododendron sp. ‘Sunglow’ were potted into pine bark substrate amended with 0, 27, 54, 67 or 81 kg/m3 (0, 45, 90, 112 or 136 lbs/yd3) arcillite. Plants were irrigated every l, 2, or 4 days. Container capacity, available water, and bulk density increased with increasing arcillite rate. Air space decreased with increasing arcillite rate. Total porosity and unavailable water were not affected by arcillite. Substrate NH4, NO3, P, K, Ca, and Mg concentrations increased with decreasing irrigation frequency. Substrate NH4, P, and K concentrations increased with increasing arcillite rate suggesting that arcillite improved retention within the container substrate. Azalea ‘Sunglow’ shoot dry weight decreased linearly with decreasing irrigation frequency and increased curvilinearly with increasing arcillite with maximum dry weight occurring at 67 kg/m3 (l12 lbs/yd2). Cotoneaster ‘Skogholm’ shoot dry weight increased linearly with increasing arcillite rate at 2 and 4 day irrigations and curvilinearly at 1 day irrigation with maximum weight at 67 kg/m3 (112 lbs/yd2).

scholarly journals Physical and Chemical Properties of Substrates Containing Earthworm Castings and Effects on Marigold Growth

HortScience ◽  
2006 ◽  
Vol 41 (6) ◽  
pp. 1474-1476 ◽  
Author(s):  
Pablo R. Hidalgo ◽  
Frank B. Matta ◽  
Richard L. Harkess
Keyword(s):  
Pore Space ◽  
Chemical Properties ◽  
Growth Index ◽  
Dry Weight ◽  
Nutrient Content ◽  
Peat Moss ◽  
Physical And Chemical Properties ◽  
Flower Number ◽  
Physical And Chemical ◽  
And Chemical Properties

The effects of various substrates with or without earthworm [Eisenia fetida (Savigny, 1826] castings on growth of marigolds were evaluated. In addition, the physical and chemical properties of such substrates were determined. Castings had a greater nutrient content than the remaining substrates. The 4 pine bark: 1 sand treatment (v/v) (PBS) had higher P, K, and Zn than 7 peat moss: 3 perlite (v/v) (PP). PP had the lowest nutrient content of all substrates. Castings (C) had the highest pH followed by 1 PBS: 1 C (v/v), 2 PBS: 1C (v/v) and 3 PBS: 1C (v/v). Sunshine Mix 1 and PP had the lowest pH. EC (ER) was increased by castings, which had high ER. Castings and PP had the greatest percentage pore space. Water-holding capacity was greatest for 2 PBS: 1C (v/v) compared with Sunshine Mix 1 followed by castings. Earthworm castings increased plant growth index, stem diameter, root growth, dry weight, and flower number of marigolds compared with PP, Sunshine Mix 1, and PBS. All mixtures of castings (C) with PP, PBS, except 3 PBS: 1C (v/v), increase the growth index of plants. 1 PP: 1 C (v/v), increased flower number compared with all substrates without castings. Castings alone increased number of open flowers, but did not differ from 1 PP: 1 C or 3 PP:1 C.

Sign in / Sign up

Export Citation Format

Share Document