scholarly journals A Comparative Study on the Ferrofluid Flow Models with Regards to the Behavior of A Ferrofluid Based Curved Rough Porous Circular Squeeze Film with Slip Velocity

2018 ◽  
Vol 1 (3) ◽  
Author(s):  
Jimit R Patel1 ◽  
G M Deheri2
Keyword(s):  
Surface Roughness ◽  
Fluid Flow ◽  
Stochastic Model ◽  
Slip Velocity ◽  
Type Equation ◽  
Squeeze Film ◽  
Load Bearing Capacity ◽  
Flow Models ◽  
The Impact ◽  
Bearing System

This investigation plans to introduce a correlation among all the three magnetic fluid flow models (Neuringer-Rosensweig’s model, Shliomis’s model, Jenkins’s model) with regards to the conduct of a ferrofluid based curved rough porous circular squeeze film with slip velocity. The Beavers and Joseph's slip velocity has been invoked to assess the impact of slip velocity. Further, the stochastic model of Christensen and Tonder has been utilized to contemplate the impact of surface roughness. The load bearing capacity of the bearing system is found from the pressure distribution which is derived from the related stochastically averaged Reynolds type equation. The graphical portrayals guarantee that Shliomis model might be favoured for preparation of the bearing system with improved life period. However, for lower to moderate values of slip Neuringer-Rosensweig model might be considered. Morever, when the slip is at least the Jenkin's model might be deployed when the roughness is at reduced level.

scholarly journals Influence of Ferrofluid Lubrication on Longitudinally Rough Truncated Conical Plates with Slip Velocity

2019 ◽  
Vol 7 (2) ◽  
pp. 93-101
Author(s):  
M M Munshi ◽  
A R Patel ◽  
G M Deheri
Keyword(s):  
Surface Roughness ◽  
Bearing Capacity ◽  
Slip Velocity ◽  
Performance Enhancement ◽  
Positive Impact ◽  
Squeeze Film ◽  
Bottom Plate ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Load Carrying

The study focuses on analyzing the effect of slip velocity in the case of a Ferrofluid squeeze film when the surface of truncated cone-shaped plates has a longitudinal roughness. Each oblique to the bottom plate was utilized by the external magnetic field. The bearing surface has a roughness that is designed with the help of a random stochastic variable having a nonzero mean, skewness and variance. The load carrying ability of a bearing system’s surface is determined by calculating the dispersal of pressure in the system, which is calculated by using the associated stochastically average Reynolds’ equation. The graphs obtained from the study shows that there is a correlation between the longitudinal surface roughness and the bearing system performance. The magnetic fluid lubrication has a positive impact on a system’s bearing capacity. However, the load bearing capacity declines as a result of the effect of slip. A high negative skewness of the surface roughness also has a positive impact on a bearing’s load carrying capacity. One interesting finding shows that contrasting to the results of transverse roughness, standard deviation positively impacts the load bearing capacity. This investigation suggests despite the im-portance of aspect ratio and semi vertical angle is significant for performance enhancement, it is also essential to maintain the slip at the lowest level.

scholarly journals Combined Effect of Slip Velocity and Surface Roughness on a Magnetic Squeeze Film for a Sphere in a Spherical Seat

2015 ◽  
Vol 2015 ◽  
pp. 1-9
Author(s):  
G. M. Deheri ◽  
Sejal J. Patel
Keyword(s):  
Surface Roughness ◽  
Slip Velocity ◽  
Type Equation ◽  
Velocity Slip ◽  
Performance Characteristics ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Slip Model ◽  
Load Carrying ◽  
Effect Of Surface

This investigation analyzes the performance of a magnetic fluid based squeeze film for a sphere in a rough spherical seat with slip velocity. The slip model of Beavers and Joseph has been deployed to study the effect of velocity slip while the stochastic model of Christensen and Tonder has been used to calculate the effect of surface roughness. The concerned statistically averaged Reynolds’ type equation is solved to derive the pressure distribution which results in the calculation of load carrying capacity. The results presented in graphical forms confirm that the adverse effect of slip velocity can be overcome to a large extent at least in the case of negatively skewed roughness. However, lower values of slip may be preferred for enhancing the performance characteristics of the bearing system. Besides, variance (−ve) provides a little support to improve the performance characteristics.

scholarly journals Jenkins model based ferrofluid lubrication of a curved rough annular squeeze film: Effect of slip velocity

2015 ◽  
Vol 42 (1) ◽  
pp. 53-71
Author(s):  
Jimit Patel ◽  
G.M. Deheri
Keyword(s):  
Surface Roughness ◽  
Slip Velocity ◽  
Type Equation ◽  
Stochastic Averaging ◽  
Combined Effect ◽  
Squeeze Film ◽  
Model Based ◽  
Squeeze Film Effect ◽  
Load Carrying ◽  
Transverse Roughness

This paper analyzes the combined effect of slip velocity and transverse roughness on the performance of a Jenkins model based ferrofluid lubrication of a squeeze film in curved rough annular plates. The slip model of Beavers and Joseph has been invoked to evaluate the effect of slip velocity. In order to find the effect of surface roughness the stochastic averaging model of Christensen and Tonder has been used. The pressure distribution is obtained by solving the concerned stochastically averaged Reynolds type equation. The load carrying capacity is calculated. The graphical representations of the results indicate that the effect of transverse surface roughness is adverse in general, however, the situation is relatively better in the case of negatively skewed roughness. Further, Jenkins model based ferrofluid lubrication offers some measures in reducing the adverse effect of roughness when slip parameter is kept at reduced level with a suitable ratio of curvature parameters. Lastly, the positive effect of magnetization gets a boost due to the combined effect of variance (-ve) and negatively skewed roughness suitably choosing the aspect ratio.

scholarly journals Combined effect of deformation and slip velocity on the performance of a Ferrofluid squeeze film in infinitely long porous rough rectangular plates

10.29007/v873 ◽  
2018 ◽  
Author(s):  
Mukesh Shimpi ◽  
Gunumani M Deheri
Keyword(s):  
Adverse Effect ◽  
Fluid Flow ◽  
Performance Characteristic ◽  
Slip Velocity ◽  
Flow Model ◽  
Type Equation ◽  
Squeeze Film ◽  
Rectangular Plates ◽  
Slip Model ◽  
Slip Coefficient

This investigation aims to study the performance characteristic of a Ferrofluid based squeeze film in infinitely long porous transversely rough rectangular plates considering the effect of deformation and slip velocity. The magnetic fluid flow model of Neuringer and Rosenweig has been used. Beavers – Joseph slip model has been adopted and the stochastic method of Christensen and Tonder has been deployed for roughness. The associated stochastically averaged Reynolds’ type equation is solved. The results prove that the Ferrofluid lubrication offers a limited help in reducing the adverse effect of slip velocity, deformation and porosity, even in the case of negatively skewed roughness. However, the situation improves when variance (- ve) occurs and lower to moderate values of deformation is involved. Aside, this study shows that the slip coefficient has to be at the reduced level an improvement of the bearing performance.

scholarly journals Combined Effect of Surface Roughness and Slip Velocity on Jenkins Model Based Magnetic Squeeze Film in Curved Rough Circular Plates

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Jimit R. Patel ◽  
Gunamani Deheri
Keyword(s):  
Surface Roughness ◽  
Slip Velocity ◽  
Type Equation ◽  
Squeeze Film ◽  
Circular Plates ◽  
Model Based ◽  
Load Carrying ◽  
Curvature Parameter ◽  
Hyperbolic Form ◽  
Magnetic Strength

This paper aims to discuss the effect of slip velocity and surface roughness on the performance of Jenkins model based magnetic squeeze film in curved rough circular plates. The upper plate’s curvature parameter is governed by an exponential expression while a hyperbolic form describes the curvature of lower plates. The stochastic model of Christensen and Tonder has been adopted to study the effect of transverse surface roughness of the bearing surfaces. Beavers and Joseph’s slip model has been employed here. The associated Reynolds type equation is solved to obtain the pressure distribution culminating in the calculation of load carrying capacity. The computed results show that the Jenkins model modifies the performance of the bearing system as compared to Neuringer-Rosensweig model, but this model provides little support to the negatively skewed roughness for overcoming the adverse effect of standard deviation and slip velocity even if curvature parameters are suitably chosen. This study establishes that for any type of improvement in the performance characteristics the slip parameter is required to be reduced even if variance (−ve) occurs and suitable magnetic strength is in force.

scholarly journals A Study of Hydromagnetic Longitudinal Rough Circular Step Bearing

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Jatinkumar V. Adeshara ◽  
M. B. Prajapati ◽  
G. M. Deheri ◽  
R. M. Patel
Keyword(s):  
Standard Deviation ◽  
Type Equation ◽  
Squeeze Film ◽  
Graphical Form ◽  
Load Bearing Capacity ◽  
Random Roughness ◽  
Supply Pressure ◽  
Longitudinal Roughness ◽  
Negative Effect ◽  
Bearing System

This article discusses the effect of longitudinal roughness on the performance of hydromagnetic squeeze film in circular step bearing. To characterize the random roughness of the bearing surfaces the stochastic model of Christensen and Tonder has been employed. The stochastically averaged Reynolds’ type equation is solved using suitable boundary conditions to obtain the pressure distribution and then the load bearing capacity is computed. The results are presented in graphical form. The graphical results presented here establish that the hydromagnetic lubrication offers significant help to the longitudinal roughness pattern to enhance the performance of the bearing system. Of course, conductivities of the plates, standard deviation, and the supply pressure contribute towards reducing the negative effect induced by variance (+ve) and skewness (+ve).

scholarly journals EFFECT OF SURFACE ROUGHNESS ON CHARACTERISTICS OF MAGNETIC FLUID BASED SQUEEZE FILM BETWEEN POROUS CIRCULAR PLATES

2020 ◽  
Vol 14 (1) ◽  
pp. 90-98
Author(s):  
P. L. Thakkar ◽  
H. C. Patel
Keyword(s):  
Surface Roughness ◽  
Magnetic Fluid ◽  
Carrying Capacity ◽  
Type Equation ◽  
Squeeze Film ◽  
Load Carrying Capacity ◽  
Circular Plates ◽  
Load Carrying ◽  
Better Than ◽  
Effect Of Surface

The effect of surface roughness on characteristics of magnetic fluid based squeeze film between porous circular plates is hypothetically analysed. The pressure distribution is obtained by solving concern Reynolds type equation with suitable boundary conditions and the result is utilized to obtain load carrying capacity. It is concluded that the load carrying capacity increases with increasing magnetization, while load carrying capacity decreases due to the standard deviation. It is observed that the negatively skewed roughness and negative mean increase the load carrying capacity. It is also observed that the magnetic fluid lubricant improves the performance of a bearing system, thereby, suggesting that the performance of the bearing with magnetic fluid lubricant is better than the conventional lubricant.

scholarly journals Ferrofluid based squeeze film for a rough conical bearing with deformation effect

10.29007/wlbc ◽  
2018 ◽  
Author(s):  
Jimit Patel ◽  
Mukesh Shimpi ◽  
Gunumani M Deheri
Keyword(s):  
Magnetic Field ◽  
Surface Roughness ◽  
Type Equation ◽  
Squeeze Film ◽  
Additional Degree ◽  
Load Carrying ◽  
Conical Bearing ◽  
Improved Performance ◽  
Positive Effect ◽  
The Magnetic Field

This paper aims to discuss the combined effect of longitudinal surface roughness and deformation on the behavior of a ferrofluid based squeeze film in conical plates. The Neuringer and Rosenweig model for ferrofluid flow has been considered resorting to an unusual form of the magnitude of the magnetic field. For the evaluation of surface roughness the stochastic model of Christensen and Tonder has been adopted. The concerned stochastically averaged Reynolds type equation is solved to obtain the pressure distribution which results in the calculation of load carrying capacity. The results establish that the positive effect of magnetization adds to the positive effect of longitudinal surface roughness under restricted circumstances. However, for an overall improved performance the bearing deformation must be addressed carefully as it has a significant effect on the squeeze film behavior. Besides, this article offers an additional degree of freedom through the magnitude of the magnetic field for designing the bearing system.

scholarly journals Performance of a Ferrofluid Based Rough Parallel Plate Slider Bearing: A Comparison of Three Magnetic Fluid Flow Models

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Jimit R. Patel ◽  
G. M. Deheri
Keyword(s):  
Fluid Flow ◽  
Magnetic Fluid ◽  
Carrying Capacity ◽  
Parallel Plate ◽  
Type Equation ◽  
Load Carrying Capacity ◽  
Slider Bearing ◽  
Flow Models ◽  
Load Carrying ◽  
Long Life

Efforts have been made to present a comparison of all the three magnetic fluid flow models (Neuringer-Rosensweig model, Shliomis model, and Jenkins model) so far as the performance of a magnetic fluid based parallel plate rough slider bearing is concerned. The stochastic model of Christensen and Tonder is adopted for the evaluation of effect of transverse surface roughness. The stochastically averaged Reynolds-type equation is solved with suitable boundary conditions to obtain the pressure distribution resulting in the calculation of load carrying capacity. The graphical results establish that for a bearing’s long life period the Shliomis model may be employed for higher loads. However, for lower to moderate loads, the Neuringer-Rosensweig model may be deployed.

Sign in / Sign up

Export Citation Format

Share Document