scholarly journals Equilibrium and Kinetic Studies for The Adsorptive Removal of Lead (II) Ions from Aqueous Solution Using Activated Plantain Peel Biochar

2020 ◽  
Vol 4 (1) ◽  
pp. 9-16
Author(s):  
FS Nworie ◽  
EC Oroke ◽  
II Ikelle ◽  
JS Nworu
Keyword(s):  
Aqueous Solution ◽  
Surface Area ◽  
Metal Ion ◽  
Low Cost ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Intraparticle Diffusion Model ◽  
Activated Biochar ◽  
Bet Analysis

AbstractStudies on the adsorption of Pb(II) on plantain peels biochar (PPB) was conducted. The carbonized and activated, biochar was characterized using Braunauer-Emmett-Teller (BET) surface area and x-ray diffraction crystallography (XRD). BET analysis of the PPB indicated that the pore size (cc/g) and pore surface area (m2/g) was 8.79 and 16.69 respectively. Result of the XRD evaluated through Debye-Scherrer equation, showed a nanostructure with crystallite size of 14.56 nm. Effects of initial metal ion concentration, pH, and contact time were studied in a batch reaction process. Results showed that the adsorption of lead from aqueous solution increased with an increase in pH and initial concentration. Equilibrium modeling studies suggested that the data fitted mainly to the Langmuir isotherm. Adsorption kinetic data tested using various kinetic models fitted the Weber and Morris intraparticle diffusion model implicating pore diffusion as the main rate limiting step. The sorption studies indicated the potential of plantain peel biochar as an effective, efficient and low cost adsorbent for remediating lead (II) ions contaminated environment.

scholarly journals Amine modified kaolinite clay from Nigeria: A resource for removing Cd2+ and Pb2+ ions from aqueous solution

2019 ◽  
Vol 17 (2) ◽  
Author(s):  
Adewale Adewuyi ◽  
Fabiano Vargas Pereira ◽  
Omotayo Anuoluwapo Adewuyi
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Kaolinite Clay ◽  
Effects Of Ph ◽  
Infrared Spectrometer

Kaolinite clay (KC) obtained from redemption camp; Nigeria was modified by surface grafting and investigated for the removal of Pb2+ and Cd2+ ions from aqueous solution by adsorption. KC and the modified kaolinite clay (MKC) were characterized using X-ray Diffraction analysis (XRD), Scanning Electron Microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analyzer, Fourier Transform Infrared spectrometer (FTIR), Particle Size Distribution (PSD), zeta potential, elemental analysis (CHNS/O analyzer) and Energy Dispersive Spectroscopy (EDS). Equilibrium, thermodynamics and kinetic studies were conducted by considering the effects of pH, initial metal ion concentration, contact time, adsorbent weight and temperature. Modification of KC increased its equilibrium adsorption capacity from 8.01 mg/g for Cd2+ and from 24.75 mg/g to 36.41 mg/g for Pb2+ ions. The adsorption process obeys Freundlich and Temkin isotherms. The adsorption was second-order-kinetic and controlled by both intra-particle and liquid film diffusion. Values of ΔGo, ΔHo, and ΔSo, for KC an MKC showed a stable adsorbent-adsorbate configuration.

Removal of Pb(II) and Cd(II) From Aqueous Solution by Adsorption Using Agrowaste-Modified Kaolinite Clay

2021 ◽  
Keyword(s):  
Aqueous Solution ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Kaolinite Clay ◽  
Adsorbent Surface ◽  
Initial Adsorption ◽  
Adsorption Rates

This study showed that kaolinite clay modified with Moringa oleifera pods is a promising low cost adsorbent for the removal of metals from aqueous solution because the resultant composite has higher adsorption capacities, and hence a better metal ions removal efficiency. The efficiencies of these adsorbents for the removal of Pb (II) and Cd (II) ions from aqueous solutions were studied as a function of pH, time, adsorbate concentration and adsorbent dose. Adsorption results showed that pH did significantly affect removal of heavy metal ions between pH 3 and 6. Increasing contact time and initial metal ion concentration increased the sorption capacity of the adsorbent for the metal ions. Adsorbent dosage indicated mainly surface phenomena involving sharing of electrons between the adsorbent surface and the metal ion species. The adsorption of metal ions from aqueous solutions of both metal ions at different initial metal ion concentrations reduced the initial adsorption rates of the adsorption of Pb (II) and Cd (II) by unmodified and modified kaolinite clay.

scholarly journals Removal of Lead and Cadmium Ions from Aqueous Solution by Adsorption on a Low-Cost Phragmites Biomass

Processes ◽  
2019 ◽  
Vol 7 (7) ◽  
pp. 406 ◽  
Author(s):  
Abdulaziz N. Amro ◽  
Mohammad K. Abhary ◽  
Muhammad Mansoor Shaikh ◽  
Samah Ali
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Surface Area ◽  
Metal Ion ◽  
Low Cost ◽  
Waste Water Treatment ◽  
Study Data ◽  
Small Surface ◽  
Cadmium Ions ◽  
Lead And Cadmium

In recent years, the interest in waste water treatment increased to preserve the environment. The objective of this study is the removal of lead and cadmium ions from aqueous solution by treated Phragmites biomass (TPB). TPB was characterized by using Fourier transform infrared spectroscopy (FTIR) and energy dispersive X-ray analysis (EDS) which indicates the presence of functional groups that may be responsible of metal adsorption such as hydroxyl, carbonyl, sulfonate and carboxylate. Characterization by scanning electron microscopy (SEM) and surface area analysis using the Brunauer–Emmett–Teller method (BET) illustrated that TPB is nonporous with a small surface area. The influences of various experimental factors were investigated; the proposed method recommended the extraction of Pb+2 and Cd+2 metal ions by TPB at pH 5.0. A contact time of 60 and 45 min was required for the adsorption 50 mL (50 ppm) Pb+2 and Cd+2 respectively to reach equilibrium when 0.10 g TPB was used. The optimum TPB dosage was 0.20 g for adsorption both metal ions when adsorbate solution was 50 mL (50 ppm). Particle sizes of 0.125–0.212 mm showed the best metal ion removal of both metal ions. Thermodynamic study illustrated that both metal ions correlate more with Langmuir isotherm. Furthermore, chemisorption of Pb+2 and Cd+2 on TPB was more likely according to kinetic study data.

scholarly journals Insights into the Recent Use of Modified Adsorbents in Removing Heavy Metal Ions from Aqueous Solution

2021 ◽  
Vol 12 (2) ◽  
pp. 1884-1898
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Metal Removal ◽  
Low Cost ◽  
Ion Concentration ◽  
Future Research ◽  
Batch Tests

Natural water gets contaminated with heavy metal ions because of industrial effluents' discharge into the aquatic environment. As these heavy metal ions cause various health hazards, they should be removed from the aqueous solution. Heavy metal ion concentration in the aqueous solution is very less, so conventional metal removal and recovery processes cannot be applied here. The adsorption method is a great alternative to all these processes as it is a cost-effective and easy method. The use of natural, low-cost materials as adsorbents is eco-friendly also. However, metal uptake capacity of low-cost materials is very less. So, modification is required for low-cost materials to increase their efficiency. In the present review, different modification procedures adopted by different researchers have been discussed. Different low-cost materials used are sawdust, fruit and vegetable wastes, soil, minerals, etc. The modifying agents are heat, acids, bases, and other chemicals. Nevertheless, most of the studies are limited to batch tests only. Future research should be carried out on the extension of batch tests to column study for the large-scale treatment of contaminated water, and the cost of modification procedures and their impact on the environment should also be assessed.

scholarly journals Sorption of Bivalent Ions by Cymbopogon citratus: Characterisation and Investigation of Biosorptive Capacity and Mechanism

2018 ◽  
Vol 4 (3) ◽  
pp. 297-302
Author(s):  
S. Jayashree ◽  
Jeyavathana Samuel ◽  
R. Vashantha
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Adsorption Process ◽  
Low Cost ◽  
Kinetic Studies ◽  
Solution Temperature ◽  
Isotherm Models ◽  
Physical Parameters ◽  
Cymbopogon Citratus ◽  
Equilibrium Data

The main objective of this study was to investigate the removal of cadmium(II) ions from aqueous solution using raw Cymbopogon citratus as an adsorbent. It was characterized by FT-IR, XRD, SEM-EDAX and its physical parameters were analyzed. Different factors such as pH, contact time, initial concentration and temperature were studied. Maximum adsorption was taken place at the optimum pH of 6 and the equilibrium data were analyzed by Langmuir, Freundlich and Temkin Isotherm models. Among those isotherm models Langmuir and Temkin were fitted well with good correlation coefficient (R2). The negative values of ΔG⁰ for all temperature shows the adsorption process for cadmium(II) ion was spontaneous in nature and feasible. The negative value of enthalpy change ΔH⁰ shows the adsorption process is exothermic and the positive value of ΔS⁰ indicates the disorderness or randomness process of adsorption. The positive value of Ea indicates the higher solution temperature favors the adsorption of metal ion onto RCC. The experimental data were analyzed by kinetic studies such as pseudo-first order, pseudo-second order and intra-particle diffusion models. Desorption was also studied and the recovery of the adsorbent was found to be 10%. Thus on the basis of these investigations the present study concludes that the raw Cymbopogon citratus (RCC) was found to be highly effective, nontoxic, environmental friendly and low cost adsorbent for the removal of toxic Cd(II) ions from aqueous solution.

scholarly journals Comparative Study on the Adsorption Kinetics and Thermodynamics of Metal Ions onto Acid Activated Low Cost Pandanus Carbon

2007 ◽  
Vol 4 (2) ◽  
pp. 238-254 ◽  
Author(s):  
R. Sudha ◽  
K. Kalpana ◽  
T. Rajachandrasekar ◽  
S. Arivoli
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Effect Of Temperature ◽  
Ferrous Ions ◽  
Sem Images ◽  
Operating Variables

Batch experiments were carried out for the sorption of Copper and Ferrous ions onto acid activated carbon prepared. The operating variables studied were initial metal ion concentration, pH, and temperature and contact time. The equilibrium data were fitted to the Langmuir and Freundlich isotherm equations. From this adsorption efficiency, adsorption energy, adsorption capacity, intensity of adsorption and dimensionless separation factor were calculated. From the kinetic studies the rate constant values for the adsorption process was calculated. From the effect of temperature thermodynamic parameters like ΔG°, ΔH°, and ΔS° were calculated. The mechanism of adsorption for metal ions onto carbon was investigated by using the experimental results and confirmed by FT- IR, XRD and SEM images.

Equilibrium and Kinetic Studies of Copper Metal Ion Biosorption by Flavobacterium sp. as a Low-Cost Natural Biosorbent

2011 ◽  
Vol 322 ◽  
pp. 436-439 ◽  
Author(s):  
Xi Chan Zhang ◽  
Xing Guang Li
Keyword(s):  
Metal Ion ◽  
Binding Capacity ◽  
Low Cost ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Present study deals with the evaluation of biosorptive removal of copper byFlavobacterium sp.Experiments have been carried out to find the effect of various parameters such as initial pH, contact time and initial metal ion concentration. Adsorption equilibrium studies showed that Cu(II) adsorption data followed the Langmuir model, the maximum binding capacity ofwas 55.20 mg/g at pH 6.0. Kinetics of copper biosorption by Flavobacterium sp. biomass is better described by pseudo second order kinetic model. It was also clearly observed that The present study indicated thatFlavobacterium sp.biomass may be used as a cost and effective biosorbent for the removal of Cu(II) ions from wastewater.

scholarly journals Thermodynamics and Kinetic Studies for the Adsorption Process of Methyl Orange by Magnetic Activated Carbons

2021 ◽  
Vol 14 ◽  
pp. 117862212110133
Author(s):  
Ana Karen Cordova Estrada ◽  
Felipe Cordova Lozano ◽  
René Alejandro Lara Díaz
Keyword(s):  
Aqueous Solution ◽  
Methyl Orange ◽  
Surface Area ◽  
Adsorption Process ◽  
Activated Carbons ◽  
Good Description ◽  
Kinetic Studies ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Bet Analysis

This study investigates the adsorption behavior of methyl orange (MO) by magnetic activated carbons (MACs) with different ratios of AC: Magnetite from aqueous solution. Batch experiments for MO adsorption were carried out for evaluating the thermodynamics and kinetics parameters onto the MAC adsorbents. Variables such as pH, initial concentration of the dye, contact time, and temperature have been analyzed. The physicochemical characteristics of MACs were analyzed by scanning electron microscopy (SEM), surface area analyzer (BET), and X-ray power diffraction. The results of SEM and BET analysis showed that MAC adsorbents present a porous structure and large surface area, suitable conditions for the adsorption process. The X-ray diffraction patterns of MACs revealed that the adsorbents possess magnetite as magnetic material. Adsorption kinetic studies carried out onto MACs showed that the pseudo-second-order model provides a good description of the kinetic process. The adsorption equilibrium results were well adjusted to the Langmuir isotherm, showing that the maximum adsorption capacity was for MACs with a ratio 3:1 and 2:1 AC/magnetite. Thermodynamic analysis declares that the adsorption process was established as spontaneous, endothermic, and physical adsorption in nature. The results of the this study indicated that MAC adsorbents can be used successfully for eliminating MO from aqueous solution.

Removal of Mercury (II) from Aqueous Solution by using Rice Residues

2013 ◽  
Vol 63 (1) ◽  
Author(s):  
S. T. Song ◽  
N. Saman ◽  
K. Johari ◽  
H. B. Mat
Keyword(s):  
Aqueous Solution ◽  
Surface Area ◽  
Second Order ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Mechanisms ◽  
Pseudo Second Order ◽  
Rice Residues

Sorption potential of rice residues for Hg(II) removal from aqueous solution was investigated. Rice husk (RH) and rice straw (RS) were selected and treated with sodium hydroxide (NaOH). The raw and modified adsorbents were characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and BET surface area measurements. The effects of pH, initial ion concentration, and agitation time on the removal process were studied in batch adsorption experiments. Two simple kinetic models, which are pseudo-first-order and pseudo-second-order, were tested to investigate the adsorption mechanisms. The kinetic data fits to pseudo second order model with correlation coefficients greater than 0.99 for all adsorbents. The equilibrium data fitted well with the Langmuir compared to Freundlich isotherm models. Alkali-treated adsorbent obtained larger surface area and RH-NaOH showed highest adsorption capacity followed by RS-Pure > RH-Pure > RS-NaOH. The maximum removal efficiency obtained by RH-NaOH and RS-Pure was 42 mg/l (80%) at pH 6.5 and with 2 days contact time (for 50 mg/l initial concentration and 25 mg adsorbents). 

scholarly journals The biosorption potential of waste biomass young fruit walnuts for lead ions: Kinetic and equilibrium study

2016 ◽  
Vol 70 (3) ◽  
pp. 243-255
Author(s):  
Dragana Markovic ◽  
Danijela Bojic ◽  
Aleksandar Bojic ◽  
Goran Nikolic
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Metal Ion ◽  
Low Cost ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Waste Biomass ◽  
Sorption Data ◽  
Biosorption Capacity ◽  
Young Fruit

The biosorption potential of waste biomass young fruit walnuts (YFW) as a low-cost biosorbent, processed from liqueur industry, for Pb(II) ions from aqueous solution was explored. The structural features of the biosorbent were characterized by FTIR spectroscopy, which indicates the possibility that the different functional groups may be responsible for the binding of Pb(II) ions from aqueous solution. The effects of relevant parameters such as pH (2 - 6), contact time (0 - 120 min), biosorbent dosage (2 - 20 g), initial metal ion concentration (10 - 120 mg dm-3), at a temperature of 25(C with stirring (120 rpm) and a constant ionic strength of 0,02 mol dm-3 were evaluated in batch experiments. The sorption equilibrium of Pb(II) ion (when 84 % of metal ions were sorbed at an initial concentration of 15 mg dm-3) was achieved within the pH range 4 - 5 after 50 min. Kinetic data were best described by the pseudo-second order model. Removal efficiency of Pb(II) ion rapidly increased with increasing biosorbent dose from 2.0 to 8.0 g per dm-3 of sorbate. Optimal biosorbent dose was set to 6.0 g per dm3 of sorbate. An increase in the initial metal concentration increases the biosorption capacity. The sorption data of investigated metal ion are fitted to Langmuir, Freundlich and Temkin isotherm models. The equilibrium data were well fitted by the Langmuir isotherm model (R2 ? 0.990). The maximum monolayer biosorption capacity of waste biomass YFW for Pb(II) ion, at 25.0 ? 0.5?C and pH 4.5, was found to be 19.23 mgg-1. This available waste biomass is efficient in the uptake of Pb(II) ions from aqueous solution and could be used as a low-cost and an alternative biosorbent for the treatment of wastewater streams bearing these metal ions.

Sign in / Sign up

Export Citation Format

Share Document