Removal of Mercury (II) from Aqueous Solution by using Rice Residues

2013 ◽  
Vol 63 (1) ◽  
Author(s):  
S. T. Song ◽  
N. Saman ◽  
K. Johari ◽  
H. B. Mat
Keyword(s):  
Aqueous Solution ◽  
Surface Area ◽  
Second Order ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Mechanisms ◽  
Pseudo Second Order ◽  
Rice Residues

Sorption potential of rice residues for Hg(II) removal from aqueous solution was investigated. Rice husk (RH) and rice straw (RS) were selected and treated with sodium hydroxide (NaOH). The raw and modified adsorbents were characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and BET surface area measurements. The effects of pH, initial ion concentration, and agitation time on the removal process were studied in batch adsorption experiments. Two simple kinetic models, which are pseudo-first-order and pseudo-second-order, were tested to investigate the adsorption mechanisms. The kinetic data fits to pseudo second order model with correlation coefficients greater than 0.99 for all adsorbents. The equilibrium data fitted well with the Langmuir compared to Freundlich isotherm models. Alkali-treated adsorbent obtained larger surface area and RH-NaOH showed highest adsorption capacity followed by RS-Pure > RH-Pure > RS-NaOH. The maximum removal efficiency obtained by RH-NaOH and RS-Pure was 42 mg/l (80%) at pH 6.5 and with 2 days contact time (for 50 mg/l initial concentration and 25 mg adsorbents). 

scholarly journals The Equilibrium, Kinetics, and Thermodynamics Studies of the Sorption of Methylene Blue from Aqueous Solution Using Pulverized Raw Macadamia Nut Shells

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Joshua N. Edokpayi ◽  
Samson O. Alayande ◽  
Ahmed Adetoro ◽  
John O. Odiyo
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Surface Area ◽  
Low Cost ◽  
Aqueous Media ◽  
Group Analysis ◽  
Second Order ◽  
Isotherm Models ◽  
Macadamia Nut ◽  
Pseudo Second Order

In this study, the potential for pulverized raw macadamia nut shell (MNS) for the sequestration of methylene blue from aqueous media was assessed. The sorbent was characterized using scanning electron microscopy for surface morphology, functional group analysis was performed with a Fourier-transform infrared spectrometer (FT-IR), and Brunauer–Emmett–Teller (BET) isotherm was used for surface area elucidation. The effects of contact time, sorbent dosage, particle size, pH, and change in a solution matrix were studied. Equilibrium data were fitted using Temkin, Langmuir, and Freundlich adsorption isotherm models. The sorption kinetics was studied using the Lagergren pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models. The feasibility of the study was established from the thermodynamic studies. A surface area of 2.763 m2/g was obtained. The equilibrium and kinetics of sorption was best described by the Langmuir and the pseudo-second-order models, respectively. The sorption process was spontaneous (−ΔG0=28.72−31.77 kJ/mol) and endothermic in nature (ΔH0=17.45 kJ/mol). The positive value of ΔS0 (0.15 kJ/molK) implies increased randomness of the sorbate molecules at the surface of the sorbent. This study presents sustainable management of wastewater using MNS as a potential low-cost sorbent for dye decontamination from aqueous solution.

Application of black walnut (Juglans nigra) husk for the removal of lead (II) ion from aqueous solution

2017 ◽  
Vol 75 (10) ◽  
pp. 2454-2464 ◽  
Author(s):  
O. S. Lawal ◽  
O. S. Ayanda ◽  
O. O. Rabiu ◽  
K. O. Adebowale
Keyword(s):  
Aqueous Solution ◽  
Entropy Change ◽  
Second Order ◽  
Black Walnut ◽  
Juglans Nigra ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Standard Entropy ◽  
Adsorption Model ◽  
Pseudo Second Order

The biosorption characteristics of Pb (II) ions from aqueous solution using black walnut (Juglans nigra) seed husk (WSH) biomass were investigated using batch adsorption techniques. The effects of pH, contact time, initial Pb (II) ion concentration, and temperature were studied. The Langmuir, Freundlich and Temkin isotherms were used to analyze the equilibrium data. It was found that the adsorption of Pb (II) ions onto WSH was best described by the Freundlich adsorption model. Biosorption kinetics data were tested using the pseudo-first order and pseudo-second order models, and it was observed that the kinetics data fitted the pseudo-second order model. Thermodynamic parameters such as standard Gibbs free energy change (ΔG0), standard enthalpy change (ΔH0) and standard entropy change (ΔS0) were evaluated. The result showed that biosorption of Pb (II) ions onto WSH was spontaneous and endothermic in nature. The FTIR study showed that the following functional groups: O-H, C = O, C-O, C-H and N-H were involved in binding Pb (II) ions to the biomass.

scholarly journals Sequestration of Pb(II) and Ni(II) ions from aqueous solution using microalga Rhizoclonium hookeri: adsorption thermodynamics, kinetics, and equilibrium studies

2016 ◽  
Vol 7 (2) ◽  
pp. 214-227 ◽  
Author(s):  
S. Suganya ◽  
A. Saravanan ◽  
P. Senthil Kumar ◽  
M. Yashwanthraj ◽  
P. Sundar Rajan ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Adsorption Process ◽  
Second Order ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Equilibrium Studies ◽  
Adsorption Mode ◽  
Monolayer Adsorption ◽  
Pseudo Second Order

In the present study, the microalga Rhizoclonium hookeri (RH) was effectively applied to remove the metal ions [Pb(II) and Ni(II)] from aqueous solution in batch adsorption mode experiments. The adsorption process was influenced by several operating parameters such as initial metal ion concentration, contact time, pH, particle size, adsorbent dose, and temperature. The maximum monolayer adsorption capacity of the RH was found to be 81.7 mg g−1 and 65.81 mg g−1 for Pb(II) and Ni(II) ions, respectively, at optimum conditions. The calculated thermodynamic parameters illustrated that the adsorption process was found to be spontaneous and endothermic in nature. Experimental data were analyzed in terms of pseudo-first order, pseudo-second order, and Elovich kinetic models. The results showed that the removal of Pb(II) and Ni(II) ions followed the pseudo-second order kinetics. The adsorption isotherm data were described using two and three parameter models. The results indicate that the adsorption data were best fitted with the Sips isotherm model. Consequently, the microalga RH with good adsorbability and reusability could be used as an effective adsorbent for the adsorption of Pb(II) and Ni(II) ions from wastewater.

scholarly journals A study of atrazine adsorption by using the rice straw synthesized adsorbent

2018 ◽  
Vol 192 ◽  
pp. 03035
Author(s):  
Thachanan Samanmulya ◽  
Pawinee Deetae ◽  
Patthranit Wongpromrat
Keyword(s):  
Surface Area ◽  
Rice Straw ◽  
Elemental Analysis ◽  
Pore Volume ◽  
Second Order ◽  
Batch Adsorption ◽  
Physico Chemical ◽  
Bet Analysis ◽  
Rice Straw Biochar ◽  
Pseudo Second Order

This study focused on adsorption of atrazine in adsorbent synthesized from Rice Straw. Rice Straw biochar were used in the study as they exhibited significantly high adsorption capacity for pesticide. Briefly, rice straw was pyrolysis at 600°C under nitrogen then biochar was modified using H3PO4. Biochar were characterized for their physico-chemical characteristics. The elemental analysis of biochar was performed using CHNS Analysis. The surface area and pore volume of adsorbents were estimated using the Brunauer, Emmett, and Teller (BET Analysis). In parts of Batch adsorption experiments was performed in range of room temperature and were divided to 2 parts. Part 1: Study of the kinetics adsorption was investigated using two models, namely, the pseudo-first-order and the pseudo-second-order models. Part 2: study of Adsorption isotherms. The results of CHNS analysis shows the elemental analysis that 51.795% of C, 0.763% of H, 1.634% of N and 0.654 % of S and the result of BET Analysis shows the surface area is 372.4 m2/g and pore volume of adsorbents is 0.315 cm3. From plotting between qt(mg/g) and time (t) shows the dynamics of the adsorption of atrazine onto the biochar at 15 ppm of initial atrazine concentrations. In general, atrazine was adsorbed quickly around 1-30 min. This could be due to fast mass transfer of solute from the solution to surface of adsorbent s as a result of concentration gradient of the solute. The study of the kinetics adsorption showed that the pseudo-second-order model best described the adsorption which agrees with chemisorption as the rate controlling mechanism.

scholarly journals Investigation on adsorption capacity of TiO2-P25 nanoparticles in the removal of a mono-azo dye from aqueous solution: A comprehensive isotherm analysis

2014 ◽  
Vol 20 (1) ◽  
pp. 97-107 ◽  
Author(s):  
Mohammad Behnajady ◽  
Shahrzad Yavari ◽  
Nasser Modirshahla
Keyword(s):  
Aqueous Solution ◽  
Crystallite Size ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Correlation Coefficients ◽  
Average Crystallite Size ◽  
Isotherm Models ◽  
Equilibrium Data ◽  
Pseudo Second Order

In this work TiO2-P25 nanoparticles with high surface area have been used as adsorbent for the removal of C.I Acid Red 27 (AR27), as an organic contaminant from aqueous solution. Characteristics of phases and crystallite size of TiO2-P25 nanoparticles were achieved from XRD and the surface area and pore size distribution were obtained from BET and BJH techniques. TiO2-P25 nanoparticles with almost 80% anatase and 20% rutile phases, the average crystallite size of 18 nm, have specific surface area of 56.82 m2 g-1. The effect of various parameters like initial AR27 concentration, pH, contact time and adsorbent dosage has been carried out in order to find desired adsorption conditions. The desired pH for adsorption of AR27 onto TiO2-P25 nanoparticles was 3. The equilibrium data were analyzed with various 2-, 3- and 4-parameter isotherm models. Equilibrium data fitted very well by the 4-parameter Fritz-Schluender model. Results of adsorption kinetics study indicated that the pseudo-second order kinetics provided the best fit with correlation coefficients close to unity.

Kinetic and equilibrium studies of fluoride sorption onto surfactant-modified smectites

Clay Minerals ◽  
2012 ◽  
Vol 47 (4) ◽  
pp. 429-440 ◽  
Author(s):  
S. Gamoudi ◽  
N. Frini-Srasra ◽  
E. Srasra
Keyword(s):  
Aqueous Solution ◽  
Thermodynamic Parameters ◽  
Adsorption Kinetics ◽  
Equilibrium Constants ◽  
Second Order ◽  
Operating Conditions ◽  
Polluted Water ◽  
Isotherm Models ◽  
Fluoride Ions ◽  
Pseudo Second Order

AbstractThe use of organoclays as adsorbents in the remediation of polluted water has been the subject of many recent studies. In the present work, a Tunisian smectite modified with two cationic surfactants was used as an adsorbent to examine the adsorption kinetics, isotherms and thermodynamic parameters of fluoride ions from aqueous solution. Various pH values, initial concentrations and temperatures have been tested. Two simplified kinetic models, first-order and pseudo-second-order, were used to predict the adsorption rate constants. It was found that the adsorption kinetics of fluoride onto modified smectites at different operating conditions can best be described by the pseudo-second-order model. Adsorption isotherms and equilibrium adsorption capacities were determined by the fitting of the experimental data to well known isotherm models including those of Langmuir and Freundlich. The results showed that the Langmuir model appears to fit the adsorption better than the Freundlich adsorption model for the adsorption of fluoride ions onto modified smectites. The equilibrium constants were used to calculate thermodynamic parameters, such as the change of free energy, enthalpy and entropy. Results of this study demonstrated the effectiveness and feasibility of organoclays for the removal of fluoride ions from aqueous solution.

Adsorption of heavy metals from aqueous solutions by Mg–Al–Zn mingled oxides adsorbent

2016 ◽  
Vol 74 (7) ◽  
pp. 1644-1657 ◽  
Author(s):  
Mona El-Sayed ◽  
Gh. Eshaq ◽  
A. E. ElMetwally
Keyword(s):  
Heavy Metals ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Pseudo Second Order

In our study, Mg–Al–Zn mingled oxides were prepared by the co-precipitation method. The structure, composition, morphology and thermal stability of the synthesized Mg–Al–Zn mingled oxides were analyzed by powder X-ray diffraction, Fourier transform infrared spectrometry, N2 physisorption, scanning electron microscopy, differential scanning calorimetry and thermogravimetry. Batch experiments were performed to study the adsorption behavior of cobalt(II) and nickel(II) as a function of pH, contact time, initial metal ion concentration, and adsorbent dose. The maximum adsorption capacity of Mg–Al–Zn mingled oxides for cobalt and nickel metal ions was 116.7 mg g−1, and 70.4 mg g−1, respectively. The experimental data were analyzed using pseudo-first- and pseudo-second-order kinetic models in linear and nonlinear regression analysis. The kinetic studies showed that the adsorption process could be described by the pseudo-second-order kinetic model. Experimental equilibrium data were well represented by Langmuir and Freundlich isotherm models. Also, the maximum monolayer capacity, qmax, obtained was 113.8 mg g−1, and 79.4 mg g−1 for Co(II), and Ni(II), respectively. Our results showed that Mg–Al–Zn mingled oxides can be used as an efficient adsorbent material for removal of heavy metals from industrial wastewater samples.

scholarly journals Equilibrium and Kinetic Studies for The Adsorptive Removal of Lead (II) Ions from Aqueous Solution Using Activated Plantain Peel Biochar

2020 ◽  
Vol 4 (1) ◽  
pp. 9-16
Author(s):  
FS Nworie ◽  
EC Oroke ◽  
II Ikelle ◽  
JS Nworu
Keyword(s):  
Aqueous Solution ◽  
Surface Area ◽  
Metal Ion ◽  
Low Cost ◽  
Kinetic Studies ◽  
Ion Concentration ◽  
Bet Surface Area ◽  
Intraparticle Diffusion Model ◽  
Activated Biochar ◽  
Bet Analysis

AbstractStudies on the adsorption of Pb(II) on plantain peels biochar (PPB) was conducted. The carbonized and activated, biochar was characterized using Braunauer-Emmett-Teller (BET) surface area and x-ray diffraction crystallography (XRD). BET analysis of the PPB indicated that the pore size (cc/g) and pore surface area (m2/g) was 8.79 and 16.69 respectively. Result of the XRD evaluated through Debye-Scherrer equation, showed a nanostructure with crystallite size of 14.56 nm. Effects of initial metal ion concentration, pH, and contact time were studied in a batch reaction process. Results showed that the adsorption of lead from aqueous solution increased with an increase in pH and initial concentration. Equilibrium modeling studies suggested that the data fitted mainly to the Langmuir isotherm. Adsorption kinetic data tested using various kinetic models fitted the Weber and Morris intraparticle diffusion model implicating pore diffusion as the main rate limiting step. The sorption studies indicated the potential of plantain peel biochar as an effective, efficient and low cost adsorbent for remediating lead (II) ions contaminated environment.

scholarly journals Prediction of adsorption efficiency for the removal malachite green and acid blue 161 dyes by marble sludge dust using ANN

2014 ◽  
Vol 16 (4) ◽  
pp. 676-689 ◽  
Keyword(s):  
Experimental Data ◽  
Malachite Green ◽  
Second Order ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Ann Model ◽  
Marble Dust ◽  
Pseudo Second Order ◽  
Acid Blue

<div> <p>In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were analyzed by Langmuir, Freundlich and Temkin adsorption isotherm models. The Langmuir and Freundlich adsorption models agree well with experimental data. The pseudo-second order, intraparticle intraparticle diffusion and Elovich kinetic models were applied to the experimental data in order to describe the removal mechanism of dye ions by waste marble dust. The pseudo-second order kinetic was the best fit kinetic model for the experimental data. Thermodynamics parameters such as Δ<em>G</em>, Δ<em>H</em> and Δ<em>S </em>were also calculated for the adsorption processes. The experimental data were used to construct an artificial neural network (ANN) model to predict removal of malachite green and acid blue 161 dyes by waste marble dust. A three-layer ANN, an input layer with four neurons, a hidden layer with 12 neurons, and an output layer with one neuron is constructed. Different training algorithms were tested on the model to obtain the proper weights and bias values for ANN model. The results show that waste marble dust is an efficient sorbent for malachite green dye and ANN network, which is easy to implement and is able to model the batch experimental system.</p> </div> <p>&nbsp;</p>

scholarly journals Enhancing Adsorption Capacity of Clay and Application in Dye Removal from Waste Water

2014 ◽  
Vol 39 ◽  
pp. 35-51 ◽  
Author(s):  
O.T. Ogunmodede ◽  
O.L. Adebayo ◽  
A.A. Ojo
Keyword(s):  
Waste Water ◽  
Adsorption Capacity ◽  
Surface Area ◽  
Kinetic Models ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Small Surface ◽  
Intercalation Process ◽  
Pseudo Second Order

Natural clay has been considered as a potential absorbent for removing pollutants from water and waste water. Nonetheless, the effective application of clay for water treatment is limited due to small surface area and presence of net negative surface charge, leading to it low adsorption capacity. The absorption capacity was boosted via intercalation of CaO derived from snail shell (SS). The methylene blue sorption potential, PZC, and the surface area of unmodified clay sample were substantially enhanced by the intercalation process. The process of sorption of MB from solution was analyzed using five different isotherm models (Langmuir, Freundlich, Temkin, Harkins-Jura, and Halsey isotherm equations). The value of the Langmuir monolayer sorption capacity qm (mg/g) increased from 50.12 to 88.71, PZC values increased from 4.50 to 7.40, and the surface area (m2/g) value increased from 27 m2/g to 123 m2/g after the intercalation process. The experimental data were fitted into two kinetic models: Lagergren pseudo-first order and the chemisorptions pseudo-second order. It was observed that chemisorptions pseudo-second order kinetic model described the sorption process with high coefficients of determination (r2) better than pseudo first other kinetic models. The modification caused no change in the clay surficial microstructure but increased the lattice spacing of the clay framework.

Sign in / Sign up

Export Citation Format

Share Document