scholarly journals Estimation of the refractive index of diesel fuel+biodiesel blends

2013 ◽  
Vol 24 (1) ◽  
pp. 24-26 ◽  
Author(s):  
Irina Nita ◽  
Sibel Geacai ◽  
Anisoara Neagu ◽  
Elis Geacai
Keyword(s):  
Refractive Index ◽  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Physical Property ◽  
Great Accuracy ◽  
Refractive Indices ◽  
Combustion Engines ◽  
Biodiesel Blends ◽  
Animal Fats ◽  
Fuel Blends

AbstractFor now, biodiesel is the commonly accepted biofuel as a substitute for diesel fuel in internal combustion engines. Diesel fuel blends with up to 20% biodiesel can be used in diesel engines without any modification. A lot of studies regarding diesel fuel+biodiesel blends properties are presented in the literature. Some of the important properties of diesel fuel+biodiesel blends can be evaluated from other blends properties. For example, density and viscosity of biodiesel blends can be predicted based on blend refractive index. More than that, refractive index can be used as a reliable physical property to predict transesterification reaction progress. As a result, the refractive index of diesel fuel+biodiesel blends is important in order to characterize these blends or to monitor the evolution of transesterification process of vegetable oils or animal fats. The refractive index of diesel fuel+biodiesel blends can be experimentally determined or evaluated based on refractive indices of diesel fuel and biodiesel. The aim of this study was to estimate the accuracy of refractive index of diesel fuel +biodiesel blends calculation, using models initially proposed to evaluate the refractive index of a binary liquid mixture. It was shown that the refractive index of diesel fuel+biodiesel blends can be accurately predicted from refractive indices of the components of the blend. Wiener, Heller and Edward equations can be recommended to predict with a great accuracy the refractive index of diesel fuel+biodiesel blends.

scholarly journals Models for automotive fuel droplets heating and evaporation

2017 ◽  
Author(s):  
Mansour Al Qubeissi ◽  
Sergei Sazhin ◽  
Nawar Al-Esawi
Keyword(s):  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Methyl Esters ◽  
Biodiesel Fuel ◽  
Combustion Engines ◽  
Fuel Droplets ◽  
Fuel Blends ◽  
Automotive Fuel ◽  
Biodiesel Fuels ◽  
Blended Fuels

The paper presents recent approaches to the modelling of heating and evaporation of automotive fuel droplets with application to biodiesel, diesel, gasoline, and blended fuels in conditions representative of internal combustion engines. The evolutions of droplet radii and temperatures for gasoline, diesel, and a broad range of biodiesel fuels and their selective diesel fuel blends have been predicted using the Discrete Component model (DCM). These mixtures combine up to 112 components of hydrocarbons and methyl esters. The results are compared with the predictions of the case when blended diesel-biodiesel fuel are represented by pure fossil and biodiesel fuels. In contrast to previous studies, it is shown that droplet evaporation time and surface temperature predicted for 100% biodiesel (B100) are not always close to those predicted for pure diesel fuel. Also, the previously introduced MultiDimensional Quasi-Discrete model and its application to these fuels and their mixtures are discussed. The previous application of this model has resulted in up to 96% reduction in CPU time compared to the case when all fuel components are considered using the DCM.DOI: http://dx.doi.org/10.4995/ILASS2017.2017.4754

DIESEL ENGINE OPERATION IN USE OF FUEL WITH ADDITIVES

2018 ◽  
pp. 18-24
Author(s):  
Petar Kazakov ◽  
Atanas Iliev ◽  
Emil Marinov
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Experimental Studies ◽  
Combustion Engines ◽  
Engine Operation ◽  
Factors Affecting ◽  
Operating Modes ◽  
Positive Effects

Over the decades, more attention has been paid to emissions from the means of transport and the use of different fuels and combustion fuels for the operation of internal combustion engines than on fuel consumption. This, in turn, enables research into products that are said to reduce fuel consumption. The report summarizes four studies of fuel-related innovation products. The studies covered by this report are conducted with diesel fuel and usually contain diesel fuel and three additives for it. Manufacturers of additives are based on already existing studies showing a 10-30% reduction in fuel consumption. Comparative experimental studies related to the use of commercially available diesel fuel with and without the use of additives have been performed in laboratory conditions. The studies were carried out on a stationary diesel engine СМД-17КН equipped with brake КИ1368В. Repeated results were recorded, but they did not confirm the significant positive effect of additives on specific fuel consumption. In some cases, the factors affecting errors in this type of research on the effectiveness of fuel additives for commercial purposes are considered. The reasons for the positive effects of such use of additives in certain engine operating modes are also clarified.

Engine Performance with Diesel-Biodiesel Blends Fuel and Emission Characteristics

2020 ◽  
Vol 38 (5A) ◽  
pp. 779-788
Author(s):  
Marwa N. Kareem ◽  
Adel M. Salih
Keyword(s):  
Sulfur Content ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Esterification Reaction ◽  
Biodiesel Fuel ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Biodiesel Blends ◽  
Fuel Blends ◽  
Hc Emissions

In this study, the sunflowers oil was utilized as for producing biodiesel via a chemical operation, which is called trans-esterification reaction. Iraqi diesel fuel suffers from high sulfur content, which makes it one of the worst fuels in the world. This study is an attempt to improve the fuel specifications by reducing the sulfur content of the addition of biodiesel fuel to diesel where this fuel is free of sulfur and has a thermal energy that approaches to diesel.20%, 30% and 50% of Biodiesel fuel were added to the conventional diesel. Performance tests and pollutants of a four-stroke single-cylinder diesel engine were performed. The results indicated that the brake thermal efficiency a decreased by (4%, 16%, and 22%) for the B20, B30 and B50, respectively. The increase in specific fuel consumption was (60%, 33%, and 11%) for the B50, B30, and B20 fuels, respectively for the used fuel blends compared to neat diesel fuel. The engine exhaust gas emissions measures manifested a decreased of CO and HC were CO decreased by (13%), (39%) and (52%), and the HC emissions were lower by (6.3%), (32%), and (46%) for B20, B30 and B50 respectively, compared to diesel fuel. The reduction of exhaust gas temperature was (7%), (14%), and (32%) for B20, B30 and B50 respectively. The NOx emission increased with the increase in biodiesel blends ratio. For B50, the raise was (29.5%) in comparison with diesel fuel while for B30 and B20, the raise in the emissions of NOx was (18%) and...

Experimental Studies on the Performance of C.I Engine with Fish Oil Methyl Ester as Fuel for Various Blends of Diesel and LPG

2015 ◽  
Vol 787 ◽  
pp. 687-691
Author(s):  
Tarigonda Hari Prasad ◽  
R. Meenakshi Reddy ◽  
P. Mallikarjuna Rao
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Research Work ◽  
Experimental Studies ◽  
Internal Combustion ◽  
Combustion Engines ◽  
Inlet Manifold

Fossil fuels are exhausting quickly because of incremental utilization rate due to increase population and essential comforts on par with civilization. In this connection, the conventional fuels especially petrol and diesel for internal combustion engines, are getting exhausted at an alarming rate. In order to plan for survival of technology in future it is necessary to plan for alternate fuels. Further, these fossil fuels cause serious environmental problems as they release toxic gases into the atmosphere at high temperatures and concentrations. The predicted global energy consumption is increasing at faster rate. In view of this and many other related issues, these fuels will have to be replaced completely or partially by less harmful alternative, eco-friendly and renewable source fuels for the internal combustion engines. Hence, throughout the world, lot of research work is in progress pertaining to suitability and feasibility of alternative fuels. Biodiesel is one of the promising sources of energy to mitigate both the serious problems of the society viz., depletion of fossil fuels and environmental pollution. In the present work, experiments are carried out on a Single cylinder diesel engine which is commonly used in agricultural sector. Experiments are conducted by fuelling the diesel engine with bio-diesel with LPG through inlet manifold. The engine is properly modified to operate under dual fuel operation using LPG through inlet manifold as fuel along FME as ignition source. The brake thermal efficiency of FME with LPG (2LPM) blend is increased at an average of 5% when compared to the pure diesel fuel. HC emissions of FME with LPG (2LPM) blend are reduced by about at an average of 21% when compared to the pure diesel fuel. CO emissions of FME with LPG (2LPM) blends are reduced at an average of 33.6% when compared to the pure diesel fuel. NOx emissions of FME with LPG (2LPM) blend are reduced at an average of 4.4% when compared to the pure diesel fuel. Smoke opacity of FME with LPG (2LPM) blend is reduced at an average of 10% when compared to the pure diesel fuel.

scholarly journals Fuel consumption in an air blower for agricultural use under different operating conditions

2017 ◽  
Vol 21 (8) ◽  
pp. 579-584
Author(s):  
Robson L. da Silva
Keyword(s):  
Fuel Consumption ◽  
Internal Combustion Engines ◽  
Operating Conditions ◽  
Combustion Engines ◽  
Otto Cycle ◽  
Technical Standards ◽  
Fuel Blends ◽  
Agricultural Use ◽  
Air Blower ◽  
Ethanol Blends

ABSTRACT Evaluation of fuel consumption in internal combustion engines (ICE) of agricultural machinery and equipment is important in determining the performance under various operating conditions, especially when using biofuels. This study consisted of experimental evaluation of the gasoline (petrol)/ethanol consumption in a two-stroke 1-cylinder ICE, Otto cycle, functioning as an air blower for agriculture and related applications. A methodology for tests of non-automotive ICE, based on ABNT/NBR technical standards, was considered. The presented results refer to operation with commercial and non-commercial fuel blends. Characteristic curves for the tested equipment are presented, identifying consumption conditions and trend in the whole operating range of angular speeds (RPM), for five fuel blends (gasoline/ethanol). For the operating conditions of minimum and maximum angular speeds, 20 and 30% ethanol blends had the highest and lowest fuel consumptions, respectively.

Ammonia and Gasoline Fuel Blends for Internal Combustion Engines

2014 ◽  
Author(s):  
Shehan Omantha Haputhanthri ◽  
Timothy Taylor Maxwell ◽  
John Fleming ◽  
Chad Austin
Keyword(s):  
Liquid Phase ◽  
Internal Combustion Engines ◽  
Gasoline Engine ◽  
Phase Solubility ◽  
Hydrogen Energy ◽  
Combustion Engines ◽  
High Pressure Cell ◽  
Fuel Blends ◽  
Composite Fuel ◽  
Mass Basis

Ammonia, when blended with hydro carbon fuels, can be used as a composite fuel to power existing IC engines. Such blends, similar to ethanol and gasoline fuel blends, can be used to commercialize ammonia as an alternative fuel. Feasibility of developing ammonia gasoline liquid fuel blends and the use of ethanol as an emulsifier to enhance the solubility of ammonia in gasoline were studied using a small thermostated vapor liquid equilibrium (VLE) high pressure cell in this research. A larger VLE cell was used to develop identified fuel blends in sufficient quantities for engine dynamo-meter tests. A engine dynamometer equipped with a 2.4L gasoline engine was used to benchmark performance of ammonia fuel blends against standard fuels. Solubility test results proved that ethanol free gasoline is capable of dissolving 4.5% of ammonia on volume basis (23 g/l on mass basis) at 50 psi [344.7 kPa] pressure and 286.65 K temperature in liquid phase. Solubility levels are increased with the use of ethanol. Gasoline with 30% ethanol can retain 18% of ammonia in the liquid phase by volume basis (105 g/l by mass basis) at the same pressure and temperature. Dynamometer results show the ability of new composite fuel blends to produce the same amount of torque and power in the lower rpm limits. At higher rpm levels ammonia rich fuels result in an increased torque and power. Thus it can be concluded that hydrogen energy can be stored as ammonia-gasoline fuel blends and recovered back successfully without any strenuous modification to the existing infrastructure and end user equipment or behavior.

scholarly journals Prediction of diesel engine performance, emissions and cylinder pressure obtained using bioethanol-biodiesel-diesel fuel blends through an artificial neural network

2017 ◽  
Vol 26 (2) ◽  
pp. 74 ◽  
Author(s):  
Hasan Aydogan
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Artificial Neural Network ◽  
Diesel Engine ◽  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Back Propagation Algorithm ◽  
Performance And Emission ◽  
Fuel Blends ◽  
Artificial Neural

The changes in the performance, emission and combustion characteristics of bioethanol-safflower biodiesel and diesel fuel blends used in a common rail diesel engine were investigated in this experimental study. E20B20D60 (20% bioethanol, 20% biodiesel, 60% diesel fuel by volume), E30B20D50, E50B20D30 and diesel fuel (D) were used as fuel. Engine power, torque, brake specific fuel consumption, NOx and cylinder inner pressure values were measured during the experiment. With the help of the obtained experimental data, an artificial neural network was created in MATLAB 2013a software by using back-propagation algorithm. Using the experimental data, predictions were made in the created artificial neural network. As a result of the study, the correlation coefficient was found as 0.98. In conclusion, it was seen that artificial neural networks approach could be used for predicting performance and emission values in internal combustion engines.

Sign in / Sign up

Export Citation Format

Share Document