scholarly journals Efficiency of Sewage Treatment Plants in the Sequential Batch Reactor

2018 ◽  
Vol 28 (3) ◽  
pp. 121-131 ◽  
Author(s):  
Anita Jakubaszek ◽  
Artur Stadnik
Keyword(s):  
Wastewater Treatment ◽  
Total Nitrogen ◽  
Total Phosphorus ◽  
Suspended Solids ◽  
Wastewater Treatment Plants ◽  
Batch Reactor ◽  
Sewage Treatment ◽  
Total Suspended Solids ◽  
Sewage Treatment Plants ◽  
Sequential Batch Reactor

Abstract The article analyzes the effectiveness of individual Actibloc wastewater treatment plants (produced by Sotralentz) working in the technology of low-rate activated sludge in the Sequential Batch Reactor (SBR) system. The assessment of the effectiveness of household wastewater treatment plants was made on the basis of pollutants: BOD5, COD, total suspended solids, total nitrogen and total phosphorus. The research objects were four household sewage treatment plants located in: Lubań, Kłębanowice, Stara Rzeka and Kościan. The efficiency of removing pollutants in the examined facilities was in the range of: BOD5 92.2 ÷ 97.2%, COD 82.6 ÷ 89.9%, total suspended solids 90.2 ÷ 96.2%, total nitrogen 50.8 ÷ 83.1%, total phosphorus 46.5 ÷ 73.6%. The treated wastewater met the requirements set out in the Regulation of the Minister of the Environment on the conditions to be met when discharging sewage into water or soil, and on substances particularly harmful to the aquatic environment (Journal of Laws 2014, item 1800) in terms of indicators such as BOD5, COD, total suspended solids and total nitrogen. The effectiveness of phosphorus removal in the studied treatment plants was much lower.

Danish Experience with Emergent Hydrophyte Treatment Systems (EHTS) and Prospects in the Light of Future Requirements on Outlet Water Quality

1990 ◽  
Vol 22 (3-4) ◽  
pp. 65-72 ◽  
Author(s):  
H.-H. Schierup ◽  
H. Brix
Keyword(s):  
Wastewater Treatment ◽  
Total Nitrogen ◽  
Total Phosphorus ◽  
Wastewater Treatment Plants ◽  
Sewage Treatment ◽  
Reed Beds ◽  
Effluent Quality ◽  
Multi Stage ◽  
Run Off ◽  
Stage System

Since 1983 approximately 150 full-scale emergent hydrophyte based wastewater treatment plants (reed beds) have been constructed in Denmark to serve small wastewater producers. The development of purification performance for 21 plants representing different soil types, vegetation, and hydraulic loading rates has been recorded. Cleaning efficiencies were typically in the range of 60-80% reduction for BOD, 25-50% reduction for total nitrogen, and 20-40% reduction for total phosphorus. The mean effluent BOD, total nitrogen and total phosphorus concentrations of the reed beds were 19 ± 10, 22 ± 9 and 6.7 ± 3.2 mg/l (mean ± SD), respectively. Thus, the general Danish effluent standards of 8 mg/l for N and 1.5 mg/l for P for sewage plants greater than 5,000 PE cannot be met by the present realised design of EHTS. The main problem observed in most systems is a poor development of horizontal hydraulic conductivity in the soil which results in surface run-off. Since the political demands for effluent quality will be more strict in the future, it is important to improve the performance of small decentral sewage treatment plants. On the basis of experiences from different types of macrophyte based and conventional low-technology wastewater treatment systems, a multi-stage system is suggested, consisting of sedimentation and sand filtration facilities followed by basins planted with emergent and submergent species of macrophytes and algal ponds.

scholarly journals Reliability of removal of selected pollutants in different technological solutions of household wastewater treatment plants

2017 ◽  
Vol 35 (1) ◽  
pp. 141-148 ◽  
Author(s):  
Michał Marzec
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Suspended Solids ◽  
Wastewater Treatment Plants ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Total Suspended Solids ◽  
Hybrid Reactor ◽  
Limit Values

AbstractThe reliability of removal of selected contaminants in three technological solutions of the household sewage treatment plants was analysed in this paper. The reliability of the sewage treatment plant with activated sludge, sprinkled biological deposit and hybrid reactor (activated sludge and immersed trickling filter) was analyzed. The analysis was performed using the Weibull method for basic indicators of impurities, BOD5, COD and total suspended solids. The technological reliability of the active sludge treatment plant was 70% for BOD5, 87% for COD and 66% for total suspended solids. In the sewage treatment plant with a biological deposit, the reliability values determined were: 30% (BOD5), 60% (COD) and 67% (total suspended solids). In a treatment plant with a hybrid reactor, 30% of the BOD5and COD limit values were exceeded, while 30% of the total suspended solids were exceeded. The reliability levels are significantly lower than the acceptable levels proposed in the literature, which means that the wastewater discharged from the analysed wastewater treatment plants often exceeds the limit values of indicators specified in currently valid in Poland Regulation of the Minister of Environment for object to 2000 population equivalent.

scholarly journals Comparative analysis of the quality of sewage discharged from selected agglomeration sewerage systems

2016 ◽  
Vol 30 (1) ◽  
pp. 35-42 ◽  
Author(s):  
Krzysztof Chmielowski ◽  
Piotr Bugajski ◽  
Grzegorz B. Kaczor
Keyword(s):  
Comparative Analysis ◽  
Total Nitrogen ◽  
Total Phosphorus ◽  
Suspended Solids ◽  
Wastewater Treatment Plants ◽  
Total Suspended Solids ◽  
Design Stage ◽  
Research Papers ◽  
Pollution Indicators

AbstractThe study provides a comparative analysis of the quality of sewage discharged from selected sewerage systems. The analyzed data were collected from 10 agglomeration sewerage systems discharging sewage into collective wastewater treatment plants (WTP). The investigated pollution indicators included BOD5, CODCr, total suspended solids and biogenic indicators such as total nitrogen and total phosphorus. These results were compared with the outcomes reported in commonly available research papers on sewage disposal. Considering the concentration of individual pollution indicators, more detailed categories of sewage pollution were adopted in this work. The sewage was divided into five basic groups: I – highly concentrated, II – concentrated, III – moderately concentrated, IV – diluted, and V – highly diluted. The sewage categories accounted for the following pollution indicators: BOD5, CODCr, total suspended solids, total phosphorus and total nitrogen. Mean BOD5, CODCr and total suspended solids in raw sewage were higher than average values reported in the referenced literature. Contrary to that, concentration of total phosphorus in raw sewage was significantly lower than reported by other authors. The outcomes of this study suggest that the predictions concerning pollution degree of raw sewage made at WTP design stage should not be based exclusively on general values provided in literature reports.

scholarly journals Assessment of the efficiency of sewage treatment plants: a comparative study between Nagasandra and Mailasandra sewage treatment plants

1970 ◽  
Vol 6 (2) ◽  
pp. 115-125 ◽  
Author(s):  
P Ravi Kumar ◽  
Liza Britta Pinto ◽  
RK Somashekar
Keyword(s):  
Wastewater Treatment ◽  
Removal Efficiency ◽  
Suspended Solids ◽  
Wastewater Treatment Plants ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Total Dissolved Solids ◽  
Cod Removal ◽  
Dissolved Solids ◽  
Sewage Treatment Plants

Bangalore city hosts two Urban Wastewater Treatment Plants (UWTPs) towards the periphery of Vrishabhavathi valley, located in Nellakedaranahalli village of Nagasandra and Mailasandra Village, Karnataka, India. These plants are designed and constructed with an aim to manage wastewater so as to minimize and/or remove organic matter, solids, nutrients, disease-causing organisms and other pollutants, before it reenters a water body. It was revealed from the performance study that efficiency of the two treatment plants was poor with respect to removal of total dissolved solids in contrast to the removal/reduction in other parameters like total suspended solids, BOD and COD. In Mailasandra STP, TDS, TSS, BOD, and COD removal efficiency was 20.01, 94.51, 94.98 and 76.26 % and respectively, while in Nagasandra STP, TDS, TSS, BOD, and COD removal efficiency was 28.45, 99.0, 97.6 and 91.60 % respectively. The order of reduction efficiency was TDS < COD < TSS < BOD and TDS < COD < BOD < TSS respectively in Mailasandra and Nagasandra STPs. Additionally, the problems associated with the operation and maintenance of wastewater treatment plants is discussed. Keywords: Total dissolved solids; Chemical oxygen demand; Biochemical oxygen demand; Aeration tank; Mixed liquor suspended solids; Sludge volume index DOI: 10.3126/kuset.v6i2.4020Kathmandu University Journal of Science, Engineering and Technology Vol.6. No II, November, 2010, pp.115-125

Assessment of Freshwater Inflow and Water Quality for an Urbanized, Subtropical Estuary (Lake Worth Lagoon, Florida, USA)

2018 ◽  
Vol 52 (4) ◽  
pp. 19-31
Author(s):  
Christopher Buzzelli ◽  
Zhiqiang Chen ◽  
Peter Doering ◽  
Amanda Kahn
Keyword(s):  
Water Quality ◽  
Total Nitrogen ◽  
Total Phosphorus ◽  
Suspended Solids ◽  
Environmental Parameters ◽  
Total Suspended Solids ◽  
South Florida ◽  
Freshwater Inflow ◽  
Spatial And Temporal Variability ◽  
Palm Beach County

Abstract Coastal water bodies are impacted by watershed alterations, increased population density, modifications to inlets and shorelines, climatic periodicity, and increases in external material loads. Estuaries such as Lake Worth Lagoon (LWL) in south Florida possess all these attributes. The LWL watershed extends from the southeastern portion of Lake Okeechobee through Palm Beach County, where it meets the lagoon. Palm Beach County Department of Environmental Resources Management recognizes the social and ecological importance of the ~36 km lagoon and aims to maintain suitable water and habitat quality for all stakeholders. Recent declines and shifts of seagrass distribution along the lagoon prompted a step toward better understanding the water quality patterns of the system. In support of these efforts, this study assessed bathymetry, inflow, flushing, and water quality attributes (chlorophyll a, salinity, total nitrogen, total phosphorus, total suspended solids, turbidity) using data collected along a series of 14 midlagoon stations from 2007 to 2015. Salinity in the North Segment was higher and less variable because of proximity to Palm Beach Inlet. Although concentrations of chlorophyll a, total nitrogen, and total phosphorus correlated with freshwater inflow, turbidity and total suspended solids were not. Fast flushing of the lagoon on a scale of days likely precludes water quality issues common to many estuaries with higher resident times. However, the combination of landscape-scale water management, a shoreline that is almost 70% modified by hard structures, and changes in essential nearshore habitats, introduces new levels of uncertainty to both the understanding and management of LWL. From this study, increased knowledge of relationships among water quality parameters and their spatial and temporal variability in LWL provides points of reference from which targeted studies can be developed to explore links between environmental parameters and responses of key organisms in this unique system.

scholarly journals The Efficiency and Reliability of Pollutant Removal in a Hybrid Constructed Wetland with Common Reed, Manna Grass, and Virginia Mallow

Water ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1445 ◽  
Author(s):  
Michał Marzec ◽  
Krzysztof Jóźwiakowski ◽  
Anna Dębska ◽  
Magdalena Gizińska-Górna ◽  
Aneta Pytka-Woszczyło ◽  
...  
Keyword(s):  
Total Nitrogen ◽  
Total Phosphorus ◽  
Constructed Wetland ◽  
Suspended Solids ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Total Suspended Solids ◽  
Common Reed ◽  
Pollutant Removal ◽  
Limit Values

In this paper, the pollutant removal efficiency and the reliability of a vertical and horizontal flow hybrid constructed wetland (CW) planted with common reed, manna grass, and Virginia mallow were analyzed. The wastewater treatment plant, located in south-eastern Poland, treated domestic sewage at an average flow rate of 2.5 m3/d. The tests were carried out during five years of its operation (2014–2018). The following parameters were measured: biochemical oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids, total nitrogen, and total phosphorus. The results showed that more than 95% of BOD5, COD, and total phosphorus was removed in the tested CW system. The average effectiveness of removal of total suspended solids and total nitrogen exceeded 86%. A reliability analysis performed using the Weibull probability model showed that the removal reliability in the tested CW was very high for BOD5, COD, total suspended solids, and total phosphorus (100%). The probability that the total nitrogen concentration in the treated effluents would reach the limit value (30 mg/L) established for effluents discharged from a treatment plant of less than 2000 PE (population equivalent) to standing waters was 94%. The values of all the pollution indicators in wastewater discharged to the receiver were significantly lower than the limit values required in Poland. The investigated hybrid CW system with common reed, manna grass, and Virginia mallow guaranteed stable low values of BOD5, COD, total suspended solids, and total phosphorus in the treated wastewater, which meant it was highly likely to be positively evaluated in case of an inspection.

Reed beds: constructed wetlands for municipal wastewater treatment plant sludge dewatering

2001 ◽  
Vol 44 (11-12) ◽  
pp. 393-398 ◽  
Author(s):  
J.S. Begg ◽  
R.L. Lavigne ◽  
P.L.M. Veneman
Keyword(s):  
Wastewater Treatment ◽  
Total Phosphorus ◽  
Biochemical Oxygen Demand ◽  
Suspended Solids ◽  
Oxygen Demand ◽  
Total Suspended Solids ◽  
Sludge Dewatering ◽  
Sludge Treatment ◽  
Reed Beds ◽  
Reed Bed

Reed beds are an alternative technology wastewater treatment system that mimic the biogeochemical processes inherent in natural wetlands. The purpose of this project was to determine the effectiveness of a reed bed sludge treatment system (RBSTS) in southern New England after a six-year period of operation by examining the concentrations of selected metals in the reed bed sludge biomass and by determining the fate of solids and selected nutrients. Parameters assessed in both the reed bed influent and effluent: total suspended solids, biochemical oxygen demand, nitrate-nitrogen and total phosphorus. In addition, the following metals were studied in the reed bed influent, effluent and Phragmites plant tissue and the sludge core biomass: boron, cadmium, chromium, copper, iron, lead, manganese, molybdenum, nickel, and zinc. The removal efficiencies for sludge dewatering, total suspended solids and biochemical oxygen demand were all over 90%. Nitrate and total phosphorus removal rates were 90% and 80% respectively. Overall metals removal efficient was 87%. Copper was the only metal in the sludge biomass that exceeded the standards set by the Massachusetts Department of Environmental Protection for land disposal of sludge. The highest metal concentrations, for the most part, tended to be in the lower tier of the sludge profile. The exception was boron, which was more concentrated in the middle tier of the sludge profile. The data and results presented in this paper support the notion that reed bed sludge treatment systems and the use of reed beds provide an efficient and cost effective alternative for municipal sludge treatment.

Influence of microbial activity on polar xenobiotic degradation in activated sludge systems

2010 ◽  
Vol 62 (3) ◽  
pp. 701-707 ◽  
Author(s):  
M. Majewsky ◽  
T. Gallé ◽  
L. Zwank ◽  
K. Fischer
Keyword(s):  
Activated Sludge ◽  
Microbial Activity ◽  
Suspended Solids ◽  
Sewage Treatment ◽  
Total Suspended Solids ◽  
Active Biomass ◽  
Sewage Treatment Plants ◽  
Degradation Rates ◽  
Xenobiotic Degradation ◽  
Activated Sludge Systems

The influence of activated sludge quality on the co-metabolic biodegradation of three aminopolycarboxyl acids was investigated for a variety of Luxembourg sewage treatment plants. A combination of biodegradation experiments and respirometric techniques are presented as a reliable approach for the estimation of biokinetics and biological xenobiotic degradation rates that allow for identification of governing parameters such as microbial activity and active biomass. Results showed that biokinetics and degradation rates vary greatly between different plants. The fraction of active biomass on the total suspended solids ranged between 16.9 and 53.7%. Xenobiotic biodegradation rates correlated with microbial activity suggesting a relationship with WWTP performance for carbon and nutrient removal. The biokinetic information can be used to increase the prediction accuracy of xenobiotics removal by individual WWTPs.

scholarly journals Biodegradation of Sewage Wastewater Using Autochthonous Bacteria

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Purnima Dhall ◽  
Rita Kumar ◽  
Anil Kumar
Keyword(s):  
Biological Treatment ◽  
Suspended Solids ◽  
Bacillus Pumilus ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Total Suspended Solids ◽  
Inoculum Size ◽  
Sewage Treatment Plants ◽  
Treatment Facilities ◽  
Autochthonous Bacteria

The performance of isolated designed consortia comprisingBacillus pumilus, Brevibacterium sp, and Pseudomonas aeruginosafor the treatment of sewage wastewater in terms of reduction in COD (chemical oxygen demand), BOD (biochemical oxygen demand) MLSS (mixed liquor suspended solids), and TSS (total suspended solids) was studied. Different parameters were optimized (inoculum size, agitation, and temperature) to achieve effective results in less period of time. The results obtained indicated that consortium in the ratio of 1 : 2 (effluent : biomass) at 200 rpm, 35°C is capable of effectively reducing the pollutional load of the sewage wastewaters, in terms of COD, BOD, TSS, and MLSS within the desired discharge limits, that is, 32 mg/L, 8 mg/L, 162 mg/L, and 190 mg/L. The use of such specific consortia can overcome the inefficiencies of the conventional biological treatment facilities currently operational in sewage treatment plants.

scholarly journals Effectiveness of Pollutant Removal At the Wastwewater Treatment Plant in Goleniów

2021 ◽  
Vol 31 (3) ◽  
pp. 251-264
Author(s):  
Anita Jakubaszek
Keyword(s):  
Total Nitrogen ◽  
Suspended Solids ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Total Suspended Solids ◽  
Technical Condition ◽  
Pollutant Removal ◽  
The Poor ◽  
Treated Sewage

Abstract The article assesses the efficiency of pollutant removal at the sewage treatment plant in Goleniów after modernization of the technological system. The extension and modernization of the existing installation resulted from the need to adapt the treatment plant to accept larger loads of pollutants, improve the parameters of treated sewage discharged to the receiver, and the poor technical condition of the equipment. Before the modernization of the treatment plant, an increase in the loads of COD, BOD5, and periodic total suspended solids in raw sewage was observed as well as a reduction in the efficiency of removing pollutants from the sewage. The efficiency of removing pollutants after modernization was in the range of BOD5 - 94.4 ÷ 99.8%, COD - 89.3 ÷ 98.9%, total suspended solids TSS - 95.3 ÷ 99.7%, total nitrogen - 64.1 ÷ 95.4%, and total phosphorus - 75.4 ÷ 99.4%.

Sign in / Sign up

Export Citation Format

Share Document