scholarly journals Design and Experiment of Low-Pressure Gas Supply System for Dual Fuel Engine

2020 ◽  
Vol 27 (2) ◽  
pp. 76-84
Author(s):  
Xiaoyong Gu ◽  
Guohe Jiang ◽  
Zhenghua Guo ◽  
Shangzhi Ding
Keyword(s):  
Heat Exchange ◽  
Natural Gas ◽  
Low Pressure ◽  
Supply System ◽  
Dual Fuel ◽  
Exchange Area ◽  
Dual Fuel Engines ◽  
Buffer Tank ◽  
Glycol Solution ◽  
Gas Supply

AbstractA low-pressure gas supply system for dual fuel engines was designed to transport liquid natural gas from a storage tank to a dual fuel engine and gasify it during transportation. The heat exchange area and pressure drop in the spiral- wound heat exchanger, the volume of the buffer tank and the pressure drop in the pipeline of the gas supply system were calculated by programming using Python. Experiments were carried out during the process of starting and running the dual fuel engine using this gas supply system. Experimental data show that the gas supply system can supply gas stably during the process and ensure the stable operation of the dual fuel engine. The effects of the parameters of natural gas and ethylene glycol solution on the heat exchange area of the spiral-wound heat exchanger and the volume of the buffer tank in the gas supply system were studied. The results show that the heat exchange area calculated according to pure methane can adapt to the case of non-pure methane. The temperature difference between natural gas and ethylene glycol solution should be increased in order to reduce the heat exchange area. The heat exchange area selected according to the high pressure of natural gas can adapt to the low pressure of natural gas. The volume of the buffer tank should be selected according to the situation of the minimum methane content to adapt to the situation of high methane content. The main influencing factor in selecting the volume of the buffer tank is the natural gas flow. The results can provide guidance for the design of the gas supply system for dual fuel engines.

Assessment of the Impact of Applying a Non-Factory Dual-Fuel (Diesel/Natural Gas) Installation on the Traction Properties and Emissions of Selected Exhaust Components of a Road Semi-Trailer Truck Unit

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8001
Author(s):  
Mirosław Karczewski ◽  
Marcin Wieczorek
Keyword(s):  
Natural Gas ◽  
Carbon Dioxide Emissions ◽  
Hydrocarbon Fuel ◽  
Supply System ◽  
Operating Conditions ◽  
Dual Fuel ◽  
Compressed Natural Gas ◽  
Engine Wear ◽  
The Impact ◽  
Gas Supply

Problems such as global warming and rising oil prices are driving the implementation of ideas to reduce liquid fuel consumption and greenhouse gas emissions. One of them is the use of natural gas as an energy source. It is a hydrocarbon fuel with properties that allow the reduction of CO2 (Carbon Dioxide) emissions during combustion. Solutions are being implemented that allow for the use of natural gas to means of transport, namely in trucks of various categories and intended use. These installations are used in new vehicles, but also in the form of conversion for used cars, usually several years old. The article presents the results of tests of an engine from a used semi-trailer truck with a mileage of approx. 800 thousand km, with the compressed natural gas supply system installed. This installation (hardware and software), depending on the engine operating conditions, enables the replacement of up to 80% of diesel (base fuel) with natural gas. The impact of changing the fuel supply method on the traction characteristics calculated with the use of external characteristics of both conventional and dual-fuel mode was assessed. The emissions of exhaust gas components were also determined under the conditions of the UNECE Regulation No. 49. The test results confirm that compared to conventional fueling, dual fueling allows for a significant reduction in CO2 emissions, even in a used vehicle with high mileage. The use of a non-factory installation did not significantly affect the traction properties of the vehicle, and engine wear is of greater importance in this case (comparison with factory data). The work is a valuable supplement to the results of the research in which the impact of the use of a non-factory CNG (Compressed Natural Gas) supply system on the performance of a semi-trailer truck unit equipped with such an installation was assessed compared to a semi-trailer truck unit powered in a classic way with diesel fuel.

Research of pressure influence in the gas supply system on the energy consuption level of gas devices

2019 ◽  
Vol 6 (2) ◽  
pp. 56-63
Author(s):  
L. D. Pylypiv ◽  
І. І. Maslanych
Keyword(s):  
Natural Gas ◽  
Residential Buildings ◽  
Supply System ◽  
Normal Operation ◽  
Gas Combustion ◽  
Efficient Operation ◽  
Gas Consumption ◽  
Natural Gas Combustion ◽  
Gas Supply

There are investigated the influence of operating pressures in the gas supply system on the level of such energy indicators as efficiency, gas flow and gas overrun by gas equipment in residential buildings. There is established a relationship between the values of operating pressures in the gas supply system and the gas consumption level of household appliances. The causes of insufficient pressure in the gas networks of settlements are analyzed in the article. There is also developed an algorithm for calculating the change in the efficiency of gas appliances depending on the operational parameters of the gas network. It has been found that the most efficient operation of gas appliances is observed at an overpressure at the inlet of gas appliances of about 1200 Pa.To ensure the required quality of natural gas combustion among consumers and minimize gas consumption there are justified the following measures in the article: coordinating a domestic regulatory framework for assessing the quality of natural gas with international norms and standards; improving the preparation of gas coming from local wells before supplying it to gas distribution networks; auditing low pressure gas pipelines and reconstructing areas affected by corrosion; ensuring standard gas pressure in the network for the normal operation of domestic gas appliances; stating quality indicators of natural gas combustion by gas sales organizations.

Concept and principles of building an integrated system of management of activities of regional gas supply system entities Kaliningrad region

2019 ◽  
pp. 64-72
Author(s):  
G.G. Arunyants
Keyword(s):  
Control System ◽  
Natural Gas ◽  
Supply System ◽  
Integrated System ◽  
Software Complex ◽  
Geographically Distributed ◽  
Basic Solutions ◽  
Kaliningrad Region ◽  
And Control ◽  
Gas Supply

The results of analysis of problems of regulation of gas supply complex of Kaliningrad region and main ways to increase its efficiency, as well as basic solutions for creation of a software complex Т-GAZ-2 automated calculation of natural gas tariffs for ACS of gas supply system subjects, geographically distributed and information connected to the regional automated information and control system (RAIS).

scholarly journals CFD Study and Experimental Validation of a Dual Fuel Engine: Effect of Engine Speed

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4307
Author(s):  
Roberta De Robbio ◽  
Maria Cristina Cameretti ◽  
Ezio Mancaruso ◽  
Raffaele Tuccillo ◽  
Bianca Maria Vaglieco
Keyword(s):  
Natural Gas ◽  
High Performance ◽  
Engine Speed ◽  
Pollutant Emissions ◽  
Dual Fuel ◽  
Automotive Market ◽  
Light Duty ◽  
Viable Solution ◽  
Dual Fuel Engines ◽  
Gas Ratio

Dual fuel engines induce benefits in terms of pollutant emissions of PM and NOx together with carbon dioxide reduction and being powered by natural gas (mainly methane) characterized by a low C/H ratio. Therefore, using natural gas (NG) in diesel engines can be a viable solution to reevaluate this type of engine and to prevent its disappearance from the automotive market, as it is a well-established technology in both energy and transportation fields. It is characterized by high performance and reliability. Nevertheless, further improvements are needed in terms of the optimization of combustion development, a more efficient oxidation, and a more efficient exploitation of gaseous fuel energy. To this aim, in this work, a CFD numerical methodology is described to simulate the processes that characterize combustion in a light-duty diesel engine in dual fuel mode by analyzing the effects of the changes in engine speed on the interaction between fluid-dynamics and chemistry as well as when the diesel/natural gas ratio changes at constant injected diesel amount. With the aid of experimental data obtained at the engine test bench on an optically accessible research engine, models of a 3D code, i.e., KIVA-3V, were validated. The ability to view images of OH distribution inside the cylinder allowed us to better model the complex combustion phenomenon of two fuels with very different burning characteristics. The numerical results also defined the importance of this free radical that characterizes the areas with the greatest combustion activity.

Properties of Artificial Gaseous Mixtures for their Safe Use and Support the Natural Gas Supply Networks / Własności Sztucznych Mieszanin Gazowych do Bezpiecznego ich Użytkowania i Wspomagania Zasilania Sieci Gazu Ziemnego

2012 ◽  
Vol 57 (2) ◽  
pp. 351-362 ◽  
Author(s):  
Mariusz Łaciak
Keyword(s):  
Heat Exchange ◽  
Natural Gas ◽  
Landfill Gas ◽  
Gas Mixtures ◽  
Gaseous Mixtures ◽  
Household Appliances ◽  
The World ◽  
Wobbe Index ◽  
Gas Supply

Abstract The increase in natural gas consumption by the general public and industry development, in particular the petrochemical and chemical industries, has made increasing the world interest in using gas replacement for natural gas, both as mixtures of flammable gases and gas mixtures as LPG with air (SNG - Synthetic Natural Gas). Economic analysis in many cases prove that to ensure interchangeability of gas would cost less than the increase in pipeline capacity to deliver the same quantity of natural gas. In addition, SNG systems and installations, could be considered as investments to improve security and flexibility of gas supply. Known existing methods for determining the interchangeability of gases in gas gear based on Wobbe index, which determines the heat input and the burning rate tide, which in turn is related to flame stability. Exceeding the Wobbe index of a value increases the amount of carbon monoxide in the exhaust than the permissible concentration. Methods of determining the interchangeability of gases is characterized by a gas in relation to the above-described phenomena by means of quantitative indicators, or using diagrams interchangeability, where the gas is characterized by the position of a point in a coordinate system. The best known method for determining the interchangeability of gases is Delbourg method, in which the gas is characterized by the revised (expanded) Wobbe Index (Wr), the combustion potential, rate of soot formation (Ich) and the ratio of the formation of yellow ends (Ij). Universal way to determine the interchangeability of gas is also Weaver accounting method. It does not require determination of the reference gas. It is designed for utensils for household gas and gas pressure p = 1.25 kPa. The criteria and definition of gas interchangeability volatility in practice to the combustion in a gas gear. In the case of gas exchange in industrial furnaces, interchangeability criteria are usually not very useful because of other conditions of combustion and heat exchange. In industrial reheating furnace gas is combusted in a sealed combustion chambers. Air supply is regulated. The exhaust gases are discharged into canals and the chimney to the atmosphere. The temperature difference between load (fuel gas) and the flame is much less than in the case of gas household appliances. In the furnace heat exchange takes place mainly by radiation in 85% to 95%. The value of heat flux flowing from the gas to a heated charge is not proportional to the heat load burners. Interchangeability of gas is linked by adding to natural gas, a certain amount of gas that is a substitute for natural gas in meeting the criteria for substitution in order to ensure certainty of supply of natural gas to customers. Gases that can be used in the processes of blending and used as replacement gases are mainly a mixture of propane and propane - butane (LPG - Liquid Petroleum Gas), landfill gas or biogas (LFG - Landfill Gas) and dimethyl ether (DME). One of the more well-known gas mixtures used in many countries around the world to compensate for peak demands is a mixture containing about 75% of natural gas and approximately 25% propane / air (LPG / air). Also in Poland is prepared to amend the provisions in this regard (at this moment - oxygen in the gas network can not exceed 0.2%). In this paper, the calculations of interchangeability of gas mixtures LFG - LPG and LPG - air (SNG) for natural gas was made. It was determined whether the analyzed mixtures have similar stable flame zones regardless of the quality of LFG fuel and whether they may in whole or in part replace CH4, without any modification of equipment suction air for combustion. The obtained results will determine whether the fuel can be used as a replacement for natural gas used in such household appliances and, possibly, industrial burners. In connection with the possibility of changes in the quality of LFG, depending on such factors as storage time, as pre-treatment, will be determined the degree of interchangeability of LFG as a fuel mixed with regard to its quality.

Ability of the Methane Number Index of a Fuel to Predict Rapid Combustion in Heavy Duty Dual Fuel Engines for North American Locomotives

2015 ◽  
Author(s):  
Daniel G. Van Alstine ◽  
David T. Montgomery ◽  
Timothy J. Callahan ◽  
Radu C. Florea
Keyword(s):  
Natural Gas ◽  
Heat Release ◽  
Heat Release Rate ◽  
Release Rate ◽  
Fuel Combustion ◽  
Dual Fuel ◽  
Rapid Combustion ◽  
Dual Fuel Engines ◽  
Dual Fuel Combustion ◽  
Methane Number

Low natural gas prices have made the fuel an attractive alternative to diesel and other common fuels, particularly in applications that consume large quantities of fuel. The North American rail industry is examining the use of locomotives powered by dual fuel engines to realize savings in fuel costs. These dual fuel engines can substitute a large portion of the diesel fuel with natural gas that is premixed with the intake air. Engine knock in traditional premixed spark-ignited combustion is undesirable but well characterized by the Methane Number index, which quantifies the propensity of a gaseous fuel to autoignite after a period of time at high temperature. Originally developed for spark-ignited engines, the ability of the methane number index to predict a fuel’s “knock” behavior in dual fuel combustion is not as fully understood. The objective of this effort is to evaluate the ability of an existing methane number algorithm to predict rapid combustion in a dual fuel engine. Sets of specialized natural gas fuel blends that, according to the MWM methane number algorithm, should have similar knock characteristics are tested in a dual fuel engine and induced to experience rapid combustion. Test results and CFD analysis reveal that rapid or aggressive combustion rates happen late in the dual fuel combustion event with this engine hardware configuration. The transition from normal combustion to late rapid combustion is characterized by changes in the heat release rate profiles. In this study, the transition is also represented by a shift in the crank angle location of the combustion’s peak heat release rate. For fuels of similar methane number that should exhibit similar knock behavior, these transitions occur at significantly different relative air-fuel ratios, demonstrating that the existing MWM methane number algorithm, while excellent for spark-ignited engines, does not fully predict the propensity for rapid combustion to occur in a dual fuel engine within the scope of this study. This indicates that physical and chemical phenomena present in rapid or aggressive dual fuel combustion processes may differ from those in knocking spark-ignited combustion. In its current form a methane number algorithm can be used to conservatively rate dual fuel engines. It is possible that derivation of a new reactivity index that better predicts rapid combustion behavior of the gaseous fuel in dual fuel combustion would allow ratings to be less conservative.

scholarly journals An Assessment of the Security of China’s Natural Gas Supply System Using Two Network Models

Energies ◽  
2015 ◽  
Vol 8 (12) ◽  
pp. 13710-13725 ◽  
Author(s):  
Mingqi Zhang ◽  
Meirong Su ◽  
Weiwei Lu ◽  
Chunhua Su
Keyword(s):  
Natural Gas ◽  
Network Models ◽  
Supply System ◽  
Gas Supply

scholarly journals The analysis of ways to ensure low emission (methane inclusive) from natural gas fuelled engines

2006 ◽  
Vol 125 (2) ◽  
pp. 58-66
Author(s):  
A. KHATCHIYAN ◽  
V. KUZNETSOV ◽  
I. SHISHLOV
Keyword(s):  
Natural Gas ◽  
Research Work ◽  
Supply System ◽  
Lean Mixture ◽  
Precise Control ◽  
Fuel Ratio ◽  
Low Emission ◽  
Partial Loads ◽  
Gas Supply

The results of research work on unsupercharged and turbocharged V-type engines with natural gas fuelling system have been presented in the paper. For lower emission the original gas supply system has been designed which ensures very proper control of air-fuel ratio in both cylinder banks. It was stated, that lowering the emission needs very precise control of gas-air ratio, application of lean mixture on partial loads, control of turbocharging and appropriate choice of converters with palladium catalytic coach.

Sign in / Sign up

Export Citation Format

Share Document